<kuid2:553091:807372:2> RSK VL80K Interior KPD3-P

Тип: Кабина
Опубликовано: 17.05.2023 17:59:17
Скачиваний: 26
Размер: 70.7 MB
Скачать

Кабина электровоза ВЛ80
config.txt:
kuid                                    <kuid2:553091:807372:2>
username                                "RSK VL80K Interior KPD3-P"
category-class                          "ZI"
cameradefault                           0
kind                                    "interior"
category-region                         "RU"
category-era                            "2000s"
trainz-build                            4.6
class                                   "vl80kcab"
script                                  "vl80k.gs"
author                                  "Roman Norets aka theSEWEGI, Vladimir Belyy aka risk221"
description                             "Animated cab of an electric loco VL80"
description-ru                          "Кабина электровоза ВЛ80"
license                                 "Без согласования с автором, не распространять"
interior-controls-type                  "full"
enable-shadows-in-cab                   1
outside-visible-from-cabin              0
cabin-visible-from-outside              0
controlset                              <kuid2:151055:60033:2>
mesh-table-lod-transition-distances     500
script-include-table
{
  0                                     <kuid2:553091:807371:4>
}
soundscript
{
  epk_loop
  {
    repeat-delay                        0,0
    distance                            5,10
    attachment                          "a.epk"
    trigger                             "epk"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/epk_loop.wav"
    }
  }
  394_v_start
  {
    repeat-delay                        0.01
    distance                            3,5
    attachment                          "a.394"
    trigger                             "394_v_1"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/394-v_start.wav"
    }
  }
  394_v_loop
  {
    repeat-delay                        0,0
    distance                            3,5
    attachment                          "a.394"
    trigger                             "394_v_2"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/394-v_loop.wav"
    }
  }
  394_va_start
  {
    repeat-delay                        0.01
    distance                            3,5
    attachment                          "a.394"
    trigger                             "394_va_1"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/394-va_start.wav"
    }
  }
  394_va_loop
  {
    repeat-delay                        0,0
    distance                            3,5
    attachment                          "a.394"
    trigger                             "394_va_2"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/394-va_loop.wav"
    }
  }
  394_stab
  {
    repeat-delay                        0,0
    distance                            0.8,1.5
    attachment                          "a.394"
    trigger                             "stab"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/stab_klap.wav"
    }
  }
}
mesh-table
{
  default
  {
    mesh                                "vl80k_interior.im"
    auto-create                         1
  }
  assistant
  {
    mesh-asset                          <kuid2:361619:100188:1>
    mesh                                "assistant.im"
    anim                                "assistant.kin"
    animation-loop-speed                1
    att                                 "a.pomoha"
    auto-create                         0
  }
  pribory
  {
    mesh                                "pribory.im"
    att                                 "a.cntr_m"
    auto-create                         1
  }
  pribory_n
  {
    mesh                                "pribory_n.im"
    att                                 "a.cntr_m"
    auto-create                         0
  }
  contr_m
  {
    mesh                                "contr_m.im"
    kind                                "lever"
    att                                 "a.cntr_m"
    auto-create                         1
    notches                             0,0.125,0.285,0.45,0.585,0.725,0.865,1
    notchheight                         0,0,0,0,0,0,0,0
    radius                              0.15
    mousespeed                          -0.1
    angles                              -0.174,2.268
    limits                              1,8
  }
  bloc
  {
    kind                                "lever"
    mesh                                "rbl367.im"
    att                                 "a.rbl367"
    auto-create                         1
    mousespeed                          -1
    radius                              0.05
    limits                              0,1
    angles                              0,-3.1
    notches                             0,1
    notchheight                         0,0
  }
  kran_254
  {
    mesh                                "254_ruchka.im"
    att                                 "a.254"
    auto-create                         1
    kind                                "lever"
    angles                              0,-2.9
    limits                              0,1
    att-parent                          "kran_254b"
    notches                             0.02,0.255,0.51,0.765,1
    notchheight                         0,0,0,0,0
    test-collisions                     1
    mousespeed                          -0.3
  }
  kran_254b
  {
    mesh                                "254b.im"
    anim                                "254b.kin"
    att                                 "a.254b"
    auto-create                         1
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  kran_394
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "394_ruchka.im"
    att                                 "a.394"
    limits                              0,1
    angles                              0,-2.164
    notches                             0,0.31,0.465,0.558,0.612,0.698,1
    notchheight                         0,0,0,0,0,0,0
    radius                              0.15
    mousespeed                          -0.6
    test-collisions                     1
  }
  kpdd
  {
    auto-create                         1
    mesh                                "kpdd.im"
    att                                 "a.speedo_needle"
    att-parent                          "default"
  }
  kpdn
  {
    auto-create                         0
    mesh                                "kpdn.im"
    att                                 "a.speedo_needle"
    att-parent                          "default"
  }
  wind_r
  {
    kind                                "animated-lever"
    auto-create                         1
    mesh                                "wind_r.im"
    anim                                "wind_r.kin"
    att                                 "a.window"
    limits                              0,1
    mousespeed                          -0.6
    att-parent                          "default"
  }
  sl2m
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "sl2m.im"
    anim                                "sl2m.kin"
    att                                 "a.speedo_needle"
    limits                              0,150
    att-parent                          "default"
  }
  pos
  {
    kind                                "needle"
    att-parent                          "default"
    mesh                                "selsin.im"
    auto-create                         1
    att                                 "a.ur01"
    limits                              0,33
    angles                              0,6.02
    radius                              0.33
    value                               -2
  }
  revers
  {
    kind                                "lever"
    mesh                                "reverser.im"
    auto-create                         1
    att                                 "a.rev"
    limits                              0,1
    angles                              0,2.09
    notches                             0,0.25,0.5,0.7,0.85,1
    notchheight                         0,0,0,0,0,0
    mousespeed                          1
  }
  revers2
  {
    kind                                "lever"
    mesh                                "reverser.im"
    auto-create                         1
    att                                 "a.rev"
    limits                              0,1
    angles                              1.04,2.09
    notches                             0,0.3,0.6,1
    notchheight                         0,0,0,0
    mousespeed                          1
  }
  ampmeter_vu1
  {
    mesh                                "str_seti.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm01"
    limits                              0,1500
    angles                              0,4.049
    att-parent                          "default"
    value                               -2
  }
  ampmeter_vu2
  {
    mesh                                "str_seti.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tc01"
    limits                              0,1500
    angles                              0,4.049
    att-parent                          "default"
    value                               -2
  }
  voltmeter_seti
  {
    mesh                                "str_seti.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm03"
    limits                              0,30000
    angles                              0,4.15
    att-parent                          "default"
    value                               -2
  }
  voltmeter_needle
  {
    mesh                                "str_seti.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm02"
    limits                              0,1500
    angles                              0,3.839
    att-parent                          "default"
    value                               -2
  }
  strelka_cu
  {
    mesh                                "strelka_mn2.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.pom_gr"
    limits                              0,1000
    angles                              0,4.71
    value                               540
    att-parent                          "default"
  }
  strelka_gr
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.ur"
    limits                              0,1600
    angles                              0,4.71
    att-parent                          "default"
  }
  strelka_ur
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tc"
    limits                              0,1000
    angles                              0,4.59
    att-parent                          "default"
  }
  strelka_tm
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm"
    limits                              0,1000
    angles                              0,4.625
    att-parent                          "default"
  }
  strelka_tc
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.pm"
    limits                              0,1000
    angles                              0,4.71
    att-parent                          "default"
  }
  tifon
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch30"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  kpd_on
  {
    kind                                "lever"
    mesh                                "tumbler_small.im"
    att                                 "a.bf_lev05"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0.7,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  bf_red_left
  {
    kind                                "lever"
    mesh                                "tumbler_small.im"
    att                                 "a.bf_lev006"
    auto-create                         1
    mousespeed                          10
    radius                              2
    limits                              0,1
    angles                              -0.7,0.7
    notches                             0,1
    notchheight                         0,0
  }
  gvoff
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch01"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pantograph_1
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch04"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pantograph_2
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch05"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pant
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler_big.im"
    att                                 "a.switch03"
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
    att-parent                          "default"
  }
  cepi_upravleniya
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch06"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    onlight                             "switchlight1"
    att-parent                          "default"
  }
  radio
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch07"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  prog_tusklo
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch08"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator5
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch23"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pr_yarko
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler_big.im"
    att                                 "a.switch09"
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
    att-parent                          "default"
  }
  gvon
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch02"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  alsn
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch12"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  proverka_alsn
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch13"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  white_r_lamp
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch14"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  white_l_lamp
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch15"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  osveshenie_hod_chastey
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch17"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  svet_priborov
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch16"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  cab_yarko
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch19"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  cab_tusklo
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch20"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  obogrev_kabiny_2pechi
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch21"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  obogrev_kabiny_3pechi
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch18"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  swistok
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch22"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator4
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch24"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator3
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch25"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator2
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch26"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator1
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch27"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  kompressor
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch28"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator6
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch10"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  fazoraschepitel
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch29"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  avt_podsypka_peska
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch11"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  als_0
  {
    mesh                                "alsn_green.IM"
    att                                 "a.alsn"
    kind                                "light"
    auto-create                         1
  }
  als_1
  {
    mesh                                "alsn_yellow.IM"
    att                                 "a.alsn"
    kind                                "light"
    auto-create                         1
  }
  als_2
  {
    mesh                                "alsn_k-g.IM"
    att                                 "a.alsn"
    kind                                "light"
    auto-create                         1
  }
  als_3
  {
    mesh                                "alsn_red.IM"
    att                                 "a.alsn"
    kind                                "light"
    auto-create                         1
  }
  als_4
  {
    mesh                                "alsn_white.IM"
    att                                 "a.alsn"
    kind                                "light"
    auto-create                         1
  }
  ukbm_rb
  {
    mesh                                "ukbm_rb.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb"
    notches                             0
    notchheight                         0
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          10
  }
  ukbm_rb_anim
  {
    mesh                                "ukbm_rb.im"
    anim                                "ukbm_rb.kin"
    auto-create                         0
    animation-loop-speed                1
    att                                 "a.rb"
  }
  lamp
  {
    mesh                                "lamp.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.rb"
  }
  sandvalve
  {
    mesh                                "sandvalve.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.sand"
    limits                              0,1
    angles                              0,0.174
    mousespeed                          15
  }
  kn3
  {
    mesh                                "knr.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_group"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  kn1
  {
    mesh                                "knb1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_group"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  kn2
  {
    mesh                                "knb2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_group"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  epk
  {
    mesh                                "epk_key.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.epk"
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
  }
  lamp_gv0
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_gv0"
  }
  lamp_vu0
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_vu0"
  }
  lamp_ohp0
  {
    mesh                                "lamp_green.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_ohp0"
  }
  lamp_ovu0
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_ovu0"
  }
  lamp_v0
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_v0"
  }
  lamp_gv1
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_gv1"
  }
  lamp_vu1
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_vu1"
  }
  lamp_ohp1
  {
    mesh                                "lamp_green.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_ohp1"
  }
  lamp_ovu1
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_ovu1"
  }
  lamp_v1
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_v1"
  }
  lamp_td
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_td"
  }
  lamp_tm
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_tm"
  }
  lamp_tr
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_tr"
  }
  lamp_rz
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_rz"
  }
  lamp_rb
  {
    mesh                                "lamp_white.im"
    att-parent                          "default"
    att                                 "a.lamp_rb"
  }
  lamp_fr
  {
    mesh                                "lamp_green.im"
    att-parent                          "default"
    att                                 "a.lamp_fr"
  }
  lamp_zb
  {
    mesh                                "lamp_red.im"
    att-parent                          "default"
    att                                 "a.lamp_zb"
  }
  timem0_0
  {
    mesh                                "s0.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem0"
  }
  timem0_1
  {
    mesh                                "s1.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem0"
  }
  timem0_2
  {
    mesh                                "s2.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem0"
  }
  timem0_3
  {
    mesh                                "s3.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem0"
  }
  timem0_4
  {
    mesh                                "s4.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem0"
  }
  timem0_5
  {
    mesh                                "s5.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem0"
  }
  timem0_6
  {
    mesh                                "s6.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem0"
  }
  timem0_7
  {
    mesh                                "s7.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem0"
  }
  timem0_8
  {
    mesh                                "s8.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem0"
  }
  timem0_9
  {
    mesh                                "s9.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem0"
  }
  timem1_0
  {
    mesh                                "s0.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem1"
  }
  timem1_1
  {
    mesh                                "s1.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem1"
  }
  timem1_2
  {
    mesh                                "s2.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem1"
  }
  timem1_3
  {
    mesh                                "s3.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem1"
  }
  timem1_4
  {
    mesh                                "s4.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem1"
  }
  timem1_5
  {
    mesh                                "s5.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem1"
  }
  timem1_6
  {
    mesh                                "s6.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem1"
  }
  timem1_7
  {
    mesh                                "s7.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem1"
  }
  timem1_8
  {
    mesh                                "s8.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem1"
  }
  timem1_9
  {
    mesh                                "s9.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.timem1"
  }
  times0_0
  {
    mesh                                "s0.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times0"
  }
  times0_1
  {
    mesh                                "s1.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times0"
  }
  times0_2
  {
    mesh                                "s2.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times0"
  }
  times0_3
  {
    mesh                                "s3.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times0"
  }
  times0_4
  {
    mesh                                "s4.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times0"
  }
  times0_5
  {
    mesh                                "s5.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times0"
  }
  times1_0
  {
    mesh                                "s0.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times1"
  }
  times1_1
  {
    mesh                                "s1.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times1"
  }
  times1_2
  {
    mesh                                "s2.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times1"
  }
  times1_3
  {
    mesh                                "s3.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times1"
  }
  times1_4
  {
    mesh                                "s4.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times1"
  }
  times1_5
  {
    mesh                                "s5.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times1"
  }
  times1_6
  {
    mesh                                "s6.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times1"
  }
  times1_7
  {
    mesh                                "s7.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times1"
  }
  times1_8
  {
    mesh                                "s8.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times1"
  }
  times1_9
  {
    mesh                                "s9.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.times1"
  }
  dottime
  {
    mesh                                "dot.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.timem1"
  }
  dotaccel
  {
    mesh                                "dot.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.accel1"
  }
  minus
  {
    mesh                                "minus.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.accel0"
  }
  speed0_0
  {
    mesh                                "b0.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed0"
  }
  speed0_1
  {
    mesh                                "b1.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed0"
  }
  speed1_0
  {
    mesh                                "b0.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed1"
  }
  speed1_1
  {
    mesh                                "b1.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed1"
  }
  speed1_2
  {
    mesh                                "b2.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed1"
  }
  speed1_3
  {
    mesh                                "b3.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed1"
  }
  speed1_4
  {
    mesh                                "b4.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed1"
  }
  speed1_5
  {
    mesh                                "b5.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed1"
  }
  speed1_6
  {
    mesh                                "b6.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed1"
  }
  speed1_7
  {
    mesh                                "b7.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed1"
  }
  speed1_8
  {
    mesh                                "b8.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed1"
  }
  speed1_9
  {
    mesh                                "b9.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed1"
  }
  speed2_0
  {
    mesh                                "b0.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed2"
  }
  speed2_1
  {
    mesh                                "b1.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed2"
  }
  speed2_2
  {
    mesh                                "b2.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed2"
  }
  speed2_3
  {
    mesh                                "b3.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed2"
  }
  speed2_4
  {
    mesh                                "b4.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed2"
  }
  speed2_5
  {
    mesh                                "b5.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed2"
  }
  speed2_6
  {
    mesh                                "b6.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed2"
  }
  speed2_7
  {
    mesh                                "b7.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed2"
  }
  speed2_8
  {
    mesh                                "b8.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed2"
  }
  speed2_9
  {
    mesh                                "b9.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.speed2"
  }
  n600
  {
    mesh                                "n600.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.times1"
  }
  accel0_0
  {
    mesh                                "s0.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel1"
  }
  accel0_1
  {
    mesh                                "s1.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel1"
  }
  accel0_2
  {
    mesh                                "s2.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel1"
  }
  accel0_3
  {
    mesh                                "s3.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel1"
  }
  accel0_4
  {
    mesh                                "s4.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel1"
  }
  accel0_5
  {
    mesh                                "s5.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel1"
  }
  accel0_6
  {
    mesh                                "s6.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel1"
  }
  accel0_7
  {
    mesh                                "s7.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel1"
  }
  accel0_8
  {
    mesh                                "s8.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel1"
  }
  accel0_9
  {
    mesh                                "s9.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel1"
  }
  accel1_0
  {
    mesh                                "s0.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel2"
  }
  accel1_1
  {
    mesh                                "s1.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel2"
  }
  accel1_2
  {
    mesh                                "s2.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel2"
  }
  accel1_3
  {
    mesh                                "s3.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel2"
  }
  accel1_4
  {
    mesh                                "s4.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel2"
  }
  accel1_5
  {
    mesh                                "s5.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel2"
  }
  accel1_6
  {
    mesh                                "s6.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel2"
  }
  accel1_7
  {
    mesh                                "s7.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel2"
  }
  accel1_8
  {
    mesh                                "s8.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel2"
  }
  accel1_9
  {
    mesh                                "s9.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel2"
  }
  accel2_0
  {
    mesh                                "s0.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel3"
  }
  accel2_1
  {
    mesh                                "s1.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel3"
  }
  accel2_2
  {
    mesh                                "s2.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel3"
  }
  accel2_3
  {
    mesh                                "s3.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel3"
  }
  accel2_4
  {
    mesh                                "s4.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel3"
  }
  accel2_5
  {
    mesh                                "s5.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel3"
  }
  accel2_6
  {
    mesh                                "s6.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel3"
  }
  accel2_7
  {
    mesh                                "s7.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel3"
  }
  accel2_8
  {
    mesh                                "s8.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel3"
  }
  accel2_9
  {
    mesh                                "s9.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.accel3"
  }
  wind_d_r
  {
    mesh                                "wind_d_r.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.wiper_r1"
  }
  wind_c_r
  {
    mesh                                "wind_c_r.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.wiper_r1"
  }
  wiper_r
  {
    mesh                                "wiper_r.im"
    anim                                "wiper_r.kin"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_r1"
  }
  wind_d_l
  {
    mesh                                "wind_d_l.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.wiper_l"
  }
  wind_c_l
  {
    mesh                                "wind_c_l.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.wiper_l"
  }
  wiper_l
  {
    mesh                                "wiper_r.im"
    anim                                "wiper_r.kin"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_l"
  }
  reg_r
  {
    mesh                                "reg_wiper.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_r_reg"
    kind                                "lever"
    limits                              0,1
  }
  reg_l
  {
    mesh                                "reg_wiper.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_l_reg"
    kind                                "lever"
    limits                              0,1
  }
  wind_d
  {
    mesh                                "wind_d.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.cntr_m"
  }
  wind_d_s
  {
    mesh                                "wind_d_s.im"
    auto-create                         0
    att-parent                          "wind_r"
    att                                 "a.wind"
  }
  wipers
  {
    mesh                                "wiper.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.weiper_comm"
    kind                                "lever"
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    angles                              0,1.57
  }
  speed_0
  {
    mesh                                "digits_g.im"
    anim                                "digits_g.kin"
    att                                 "a.spd0"
    auto-create                         0
  }
  speed_1
  {
    mesh                                "digits_g.im"
    anim                                "digits_g.kin"
    att                                 "a.spd1"
    auto-create                         1
  }
  speed_2
  {
    mesh                                "digits_g.im"
    anim                                "digits_g.kin"
    att                                 "a.spd2"
    auto-create                         1
  }
  limit_0
  {
    mesh                                "digits_r.im"
    anim                                "digits_r.kin"
    att                                 "a.ogr0"
    auto-create                         0
  }
  limit_1
  {
    mesh                                "digits_r.im"
    anim                                "digits_r.kin"
    att                                 "a.ogr1"
    auto-create                         1
  }
  limit_2
  {
    mesh                                "digits_r.im"
    anim                                "digits_r.kin"
    att                                 "a.ogr2"
    auto-create                         1
  }
  cab_black
  {
    auto-create                         1
    mesh                                "cab_black.im"
    att                                 "a.cab_black"
    att-parent                          "default"
  }
}
cameralist
{
  camera0                               -0.07,-0.441,1.519,6.309,-0.17
  camera1                               0.946,-0.528,1.313,6.27,-0.242
  camera2                               -0.506,-0.359,1.496,3.082,-0.01
  camera3                               -0.865,-0.511,1.095,5.367,-0.873
  camera4                               -0.86,-0.331,1.361,6.306,-0.237
}
thumbnails
{
  0
  {
    image                               "screen.jpg"
    width                               512
    height                              384
  }
}
string-table
{
  kran_6                                "Кран 394 | Экстренное торможение"
  kran_5                                "Кран 394 | Служебное торможение"
  kran_5a                               "Кран 394 | Торможение замедленым темпом"
  kran_4                                "Кран 394 | Перекрыша с питанием"
  kran_3                                "Кран 394 | Перекрыша без питания"
  kran_2                                "Кран 394 | Поездное"
  kran_1                                "Кран 394 | Отпуск и зарядка"
  controler_0                           "Контроллер | БВ"
  controler_1                           "Контроллер | 0"
  controler_2                           "Контроллер | АВ"
  controler_3                           "Контроллер | РВ"
  controler_4                           "Контроллер | ФВ"
  controler_5                           "Контроллер | ФП"
  controler_6                           "Контроллер | РП"
  controler_7                           "Контроллер | АП"
  reverser_0                            "Реверсор | Назад | ПП"
  reverser_1                            "Реверсор | Нейтраль"
  reverser_2                            "Реверсор | Вперёд | ПП"
  reverser_3                            "Реверсор | Вперёд | ОП I"
  reverser_4                            "Реверсор | Вперёд | ОП II"
  reverser_5                            "Реверсор | Вперёд | ОПIII"
  edtr_0                                "ЭДТ | 0"
  edtr_1                                "ЭДТ | П"
  edtr_2                                "ЭДТ | ПТ"
  edtr_3                                "ЭДТ | Т"
  klub-obj-type-0                       "СВЕТОФОР"
  _alsen                                "ЕН"
  _noalsen                              "ЕН"
  _noals                                "Нк"
  _als0                                 "АЛС"
  _als25                                "F25"
  _als50                                "F50"
  _als75                                "F75"
  _alsuni                               "FU"
  _pab                                  "ПАБ"
  _cproc                                "Т"
  _pull                                 "Пп"
  _pullfreight                          "Пг"
  klub_rk_on                            "ЯЧЕЙКА РК ИСПРАВНА"
  klub_rk_off                           "ЯЧЕЙКА РК НЕИСПРАВНА"
  klub_rk_no                            "ЯЧЕЙКА РК ОТСУТСТВУЕТ"
  klub-als-ek                           "ЭК"
  klub-als-50                           "50"
  klub-als-175                          "ЕН"
  klub-track-true                       "ПР"
  klub-track-false                      "НП"
  klub-epk-sryv                         "СРЫВ ЭПК"
  klub-pr-ur1                           "ДАВЛЕНИЕ В УР1"
  klub-pr-ur2                           "ДАВЛЕНИЕ В УР2"
  nomer_mash                            "НОМЕР МАШИНИСТА :"
  nomer_poezda                          "НОМЕР ПОЕЗДА"
  dlina_os                              "ДЛИНА В ОСЯХ"
  dlina_vag                             "ДЛИНА В ВАГОНАХ"
  mass_k                                "МАССА"
  nomer_puti                            "НОМЕР ПУТИ"
  vvedite_com                           "ВВЕДИТЕ КОМАНДУ:"
  speed-bel                             "СКОРОСТЬ НА БЕЛЫЙ:"
  pravilnost                            "ПРИЗНАК ПРАВИЛЬНОСТИ"
  trak_true                             "ПР"
  trak_notrue                           "НП"
  ogran_spd                             "ОГРАНИЧЕНИЕ"
  klub-koord                            "КООРДИНАТА (М):"
  klub-izm-koord                        "ИЗМ. КООРДИНАТЫ:"
  hasek                                 "ЭК"
  ek_st_100                             "Александров"
  ek_st_101                             "196 КМ"
  ek_st_102                             "ЯСТРЕБКИ"
  ek_st_km                              "КМ"
  klub-pr-tm                            "ДАВЛЕНИЕ В ТМ"
  klub-pr-tc                            "ДАВЛЕНИЕ В ТЦ"
  chet                                  "ПР"
  nchet                                 "НП"
  klub-u-target-type-0                  "СВЕТОФОР"
  klub-u-target-type-1                  "СТАНЦИЯ"
  klub-u-target-type-2                  "ОПАСНОЕ МЕСТО"
  klub-u-target-type-3                  "ПЛАТФОРМА"
  klub-u-target-type-4                  "МОСТ"
  klub-u-target-type-5                  "НЕЙТРАЛЬНАЯ ВСТАВКА"
  klub-u-target-type-6                  "ПРОБА ТОРМОЗОВ"
  klub-u-target-type-7                  "ТОКОРАЗДЕЛ"
  klub-u-target-type-8                  "ПЕРЕЕЗД"
  klub-u-target-type-9                  "СИГНАЛ"
  klub-u-target-type-10                 "КТСМ\ДИСК"
  klub-u-target-type-11                 "ПЕРЕХОД"
  klub-u-target-type-12                 "ГАЗОПРОВОД"
  klub-u-target-type-13                 "ПУТЕПРОВОД"
  klub-u-target-type-14                 "СТРЕЛКА"
  pr2                                   "Грузовой"
  pr3                                   "Маневровый"
  svpr                                  "Освещение приборов"
  zts                                   "Задатчик тормозной силы"
  contr_m                               "Контроллер"
  bloc                                  "Ручка блокировки 367"
  edt_controller                        "Реостатный тормоз"
  revers                                "Реверсор и ОП"
  pesok                                 "Песок"
  tifon                                 "Тифон"
  gvoff                                 "Выключение ГВ"
  pantograph_2                          "ТПП"
  pantograph_1                          "ТПЗ"
  pant                                  "Токоприёмники"
  cepi_upravleniya                      "Цепи упр-я"
  radio                                 "Радиостанция"
  prog_tusklo                           "Прожектор"
  signalisaciya                         "Сигнализация"
  pr_yarko                              "Тускло/ярко"
  gvon                                  "Вкл. ГВ и Возв. реле"
  alsn                                  "Катушки АЛСН"
  proverka_alsn                         "Проверка АЛСН"
  white_r_lamp                          "БФ правый"
  white_l_lamp                          "БФ левый"
  osveshenie_hod_chastey                "Осв. Ход. Частей"
  cab_yarko                             "Яркое осв. кабины"
  cab_tusklo                            "Тусклое осв. кабины"
  obogrev_kabiny_2pechi                 "Обогрев кабины II печи"
  obogrev_kabiny_3pechi                 "Обогрев кабины III печи"
  swistok                               "Свисток"
  ventelyator6                          "Автоподсыпка песка"
  ventelyator5                          "Песок"
  ventelyator4                          "МВ4"
  ventelyator3                          "МВ3"
  ventelyator2                          "МВ2"
  ventelyator1                          "МВ1"
  kompressor                            "Компрессор"
  vspom                                 "Фазорасщипитель"
  fazoraschepitelfazoraschepitel        "Вспоммашины"
  avt_podsypka_peska                    "Сигнализация"
  osveshenie                            "Осв. приборов"
  alsn_otkl_tumbl                       "Без АЛСН"
  saut                                  "САУТ/АЛСН"
  sekcia1                               "Секция 2"
  sekcia3                               "Секция 3"
  sekcia4                               "Секция 4"
  otkls1                                "Отключение секции 1"
  otkls2                                "Отключение секции 1"
  otkls3                                "Отключение секции 2"
  otkls4                                "Отключение секции 4"
  ukbm_rb                               "Рукоятка бдительности"
  epk_tumbler                           "ЭПК"
  radio_ukv_tumbler                     "Радио УКВ"
  radioswyaz_tumbler                    "Радиосвязь"
  radio_kv_tumbler                      "Радио КВ"
  red_l_lamp                            "Левый красный/белый"
  red_r_lamp                            "Правый красный/белый"
  t_ept                                 "ЭПТ"
  epk                                   "ЭПК-150"
  kr254                                 "кран 254"
  kpd                                   "питание КПД"
  mashlight                             "Освщение МО"
  sandvalve                             "Песок 1-я ось"
}
kuid-table
{
  dspradio                              <kuid:553091:601201>
  sl                                    <kuid2:553091:602:3>
  0                                     <kuid2:361619:100188:1>
  1                                     <kuid2:151055:60033:2>
  2                                     <kuid2:553091:807371:4>
}
Файлы:
alsn_green.im	1.5 kB
alsn_red.im	1.5 kB
alsn_yellow.im	1.5 kB
avt_kor.im	2.9 kB
254b.im	638 B
alsn_white.im	1.5 kB
254b.kin	940 B
alsn_k-g.im	1.5 kB
254_ruchka.kin	2.3 kB
b1.im	1.5 kB
b7.im	2.1 kB
b5.im	3.3 kB
b3.im	3.3 kB
b0.im	3.9 kB
b9.im	3.9 kB
b2.im	3.3 kB
b8.im	4.5 kB
394_ruchka.im	21.1 kB
b4.im	2.7 kB
contr_m.im	17.3 kB
254_ruchka.im	28.8 kB
dot.im	924 B
digits_g.im	20.4 kB
knb2.im	476 B
knb1.im	476 B
cab_black.im	13.2 kB
b6.im	3.9 kB
epk_key.im	6.6 kB
lamp_white.im	3.5 kB
kpdd.im	10.3 kB
lamp_red.im	3.5 kB
digits_r.im	20.4 kB
knr.im	476 B
lamp_green.im	3.5 kB
kpdn.im	10.3 kB
lights-lights.texture.txt	47 B
lights.texture.txt	29 B
minus.im	924 B
lamp.im	13.5 kB
assistant.im	183.1 kB
reg_wiper.im	2.2 kB
s0.im	3.9 kB
rbl367.im	3.9 kB
reverser.im	10.2 kB
n600.im	14.2 kB
s1.im	1.5 kB
s2.im	3.3 kB
s4.im	2.7 kB
s5.im	3.3 kB
s6.im	3.9 kB
s3.im	3.3 kB
sandvalve.im	3.1 kB
s9.im	3.9 kB
s8.im	4.5 kB
s7.im	2.1 kB
pribory_n.im	233.2 kB
digits_g.kin	32.4 kB
selsin.im	658 B
screen.jpg	34.9 kB
digits_r.kin	32.4 kB
sl2m.im	1.2 kB
sound
sound / 394-v_start.wav	31.7 kB
sound / 394-va_start.wav	21.5 kB
sound / epk_loop.wav	34.7 kB
sound / 394-va_loop.wav	40.2 kB
sound / stab_klap.wav	60.0 kB
sound / 394-v_stop.wav	48.9 kB
sound / 394-v_loop.wav	195.3 kB
stekla-stekla.texture.txt	47 B
str_seti_new.im	658 B
str_seti.im	654 B
sl2m.kin	10.8 kB
pribory.im	234.2 kB
tumbler_big.im	5.5 kB
strelka_mn.im	12.9 kB
strelka_mn2.im	13.0 kB
ukbm_rb.kin	288 B
tumbler_small.im	11.3 kB
ukbm_rb.im	8.9 kB
vl60.texture.txt	27 B
tumbler_large.im	7.9 kB
vl60_10.texture.txt	30 B
vl60_1.texture.txt	29 B
vl60_11.texture.txt	30 B
lights.tga	4.0 MB
vl60_12.texture.txt	30 B
vl60_12.jpg	2.6 MB
vl60_2.texture.txt	29 B
stekla.tga	8.0 MB
vl60_3.texture.txt	29 B
vl60_4.texture.txt	29 B
vl60_10.tga	3.0 MB
vl60_5.texture.txt	29 B
vl60_6.texture.txt	29 B
vl60_7.texture.txt	29 B
vl60_8.texture.txt	29 B
vl60_2.tga	12.0 MB
vl60_9.texture.txt	29 B
vl60_11.tga	12.0 MB
vl80k.gs	87 B
vu.im	7.5 kB
wind_c_l.im	2.3 kB
wind_c_r.im	2.3 kB
wind_d.im	11.7 kB
wind_d_l.im	2.3 kB
wind_d_r.im	2.3 kB
wind_d_s.im	4.1 kB
wind_r.im	53.6 kB
wind_r.kin	364 B
wiper.im	3.6 kB
wiper_r.im	7.6 kB
wiper_r.kin	2.4 kB
vl80k_interior.im	2.3 MB
vl60_6.tga	12.0 MB
vl60.tga	12.0 MB
vl60_1.tga	12.0 MB
vl60_9.tga	12.0 MB
vl60_7.tga	12.0 MB
vl60_8.tga	12.0 MB
vl60_4.tga	12.0 MB
vl60_3.tga	12.0 MB
vl60_5.tga	12.0 MB
Общий объём файлов:	153.5 MB
Версии элемента:
kuid	kind	name	build	date	size
<kuid2:553091:807372:8>	interior	RSK VL80K Interior KPD3-P	4.6	4.01.2024 12:30:26	173.3 MB
<kuid2:553091:807372:7>	interior	RSK VL80K Interior KPD3-P	4.6	29.12.2023 16:42:57	173.4 MB
<kuid2:553091:807372:5>	interior	RSK VL80K Interior KPD3-P	4.6	19.07.2023 19:42:13	127.7 MB
<kuid2:553091:807372:3>	interior	RSK VL80K Interior KPD3-P	4.6	20.03.2022 15:32:03	70.7 MB
<kuid2:553091:807372:2>	interior	RSK VL80K Interior KPD3-P	4.6	17.05.2023 17:59:17	70.7 MB
<kuid2:553091:807372:1>	interior	RSK VL80K Interior KPD3-P	3.7	21.06.2020 21:44:23	70.7 MB
<kuid:553091:807372>	interior	RSK VL80K Interior KPD3-P	3.7	17.05.2023 17:59:19	70.7 MB
Зависимости:
kuid	author	kind	name	build	date	size
<kuid2:151055:60033:2>	Эрендир	controlset	Клавиатура для дизельных локомотивов	3.7	7.01.2018 16:41:22	44.2 kB
<kuid2:361619:100188:1>	#361619	mesh	ТЭП60 Помошник машиниста	3.7	22.04.2023 21:05:18	2.7 MB
<kuid2:553091:602:5>	#553091	enginesound	RSK VL60/80 Sound Library	5	21.09.2023 7:33:27	21.2 MB
<kuid:553091:601201>	#553091	hornsound	RSK DSP Radio sounds	3.7	23.04.2023 5:09:19	22.6 kB
<kuid2:553091:807371:10>	#553091	library	RSK VL80K scripts	4.6	4.01.2024 12:29:41	76.3 kB
Всего связей: 5, неизвестных связей: 0
Зависимые элементы:
kuid	author	kind	name	build	date	size
<kuid:553091:804651>	#553091	traincar	RSK VL80K-465 A	4.6	19.07.2023 19:50:56	34.8 MB
<kuid2:553091:804651:1>	#553091	traincar	RSK VL80K-465 A	4.6	5.10.2023 15:12:00	32.3 MB
<kuid2:553091:804651:2>	#553091	traincar	RSK VL80K-465 A	4.6	12.01.2024 15:25:01	32.3 MB
<kuid:553091:804652>	#553091	traincar	RSK VL80K-465 B	4.6	22.07.2023 14:51:43	34.8 MB
<kuid2:553091:804652:1>	#553091	traincar	RSK VL80K-465 B	4.6	5.10.2023 15:12:28	32.3 MB
<kuid2:553091:804652:2>	#553091	traincar	RSK VL80K-465 B	4.6	12.01.2024 15:24:49	32.3 MB
<kuid:553091:806141>	#553091	traincar	RSK VL80K-614 A	4.6	19.07.2023 19:47:46	45.3 MB
<kuid2:553091:806141:1>	#553091	traincar	RSK VL80K-614 A	4.6	5.10.2023 15:13:12	42.8 MB
<kuid2:553091:806141:2>	#553091	traincar	RSK VL80K-614 A	4.6	12.01.2024 15:24:36	42.8 MB
<kuid:553091:806142>	#553091	traincar	RSK VL80K-614 B	4.6	19.07.2023 19:49:21	45.3 MB
<kuid2:553091:806142:1>	#553091	traincar	RSK VL80K-614 B	4.6	5.10.2023 15:14:31	42.8 MB
<kuid2:553091:806142:2>	#553091	traincar	RSK VL80K-614 B	4.6	12.01.2024 15:24:23	42.8 MB
<kuid:553091:806961>	#553091	traincar	RSK VL80K-696 A	4.6	19.07.2023 19:45:56	42.6 MB
<kuid2:553091:806961:1>	#553091	traincar	RSK VL80K-696 A	4.6	5.10.2023 15:15:32	40.1 MB
<kuid2:553091:806961:2>	#553091	traincar	RSK VL80K-696 A	4.6	12.01.2024 15:24:08	40.1 MB
<kuid:553091:806962>	#553091	traincar	RSK VL80K-696 B	4.6	19.07.2023 19:44:46	42.6 MB
<kuid2:553091:806962:1>	#553091	traincar	RSK VL80K-696 B	4.6	5.10.2023 15:16:26	40.1 MB
<kuid2:553091:806962:2>	#553091	traincar	RSK VL80K-696 B	4.6	27.02.2024 20:24:03	40.1 MB
<kuid:553091:807373>	#553091	traincar	RSK VL80K-737 A	3.7	10.05.2023 1:01:34	67.5 MB
<kuid2:553091:807373:2>	#553091	traincar	RSK VL80K-737 A	3.7	22.04.2023 15:03:26	66.1 MB
<kuid2:553091:807373:3>	#553091	traincar	RSK VL80K-737 A	4.6	19.07.2023 22:01:54	33.3 MB
<kuid2:553091:807373:4>	#553091	traincar	RSK VL80K-737 A	4.6	29.12.2023 16:42:01	30.8 MB
<kuid2:553091:807373:5>	#553091	traincar	RSK VL80K-737 A	4.6	4.01.2024 12:30:45	30.8 MB
<kuid:553091:807374>	#553091	traincar	RSK VL80K-737 B	3.7	20.05.2023 9:51:12	68.3 MB
<kuid2:553091:807374:2>	#553091	traincar	RSK VL80K-737 B	3.7	22.04.2023 15:03:25	66.8 MB
<kuid2:553091:807374:3>	#553091	traincar	RSK VL80K-737 B	4.6	19.07.2023 22:01:54	33.3 MB
<kuid2:553091:807374:4>	#553091	traincar	RSK VL80K-737 B	4.6	29.12.2023 16:43:13	30.8 MB
<kuid2:553091:807374:5>	#553091	traincar	RSK VL80K-737 B	4.6	4.01.2024 12:29:16	30.8 MB