<kuid:487016:100697> Кабина(ТР) 2ТЭ10УТК

Тип: Кабина
Опубликовано: 23.07.2020 20:18:29
Скачиваний: 397
Размер: 18.6 MB
Скачать

Кабина тепловоза 2ТЭ10УТК-выпускающегося на Луганском (Ворошиловград) тепловозостроительном заводе на Украине.
config.txt:
username                                "Cabin 2TE10UTK_(no_radio)"
username-ru                             "Кабина(ТР) 2ТЭ10УТК"
kind                                    "interior"
script                                  "chme3_cab2.gs"
class                                   "chme3_cab2"
cameradefault                           2
category-class                          "ZI"
author                                  "модель-Rokky, текстуры-Rokky, alekseymesch, фотоматериал-Zmitrok"
contact-email                           "plazma_wc@rambler.ru"
contact-website                         "http://www.trainzua.com"
category-region                         "RU"
category-era                            "1970s;1980s;1990s;2000s"
description                             "The cab of the locomotive 2TE116-release on Lugansk (Voroshilovgrad) diesel locomotive factory in Ukraine."
description-ru                          "Кабина тепловоза 2ТЭ10УТК-выпускающегося на Луганском (Ворошиловград) тепловозостроительном заводе на Украине."
license                                 "free for non commercial use"
trainz-build                            3.5
cameralist
{
  camera0                               -0.3,0.25,-0.5,0.3,-0.6
  camera1                               -0.09,0.32,0.92,2.98,0.03
  camera2                               -0.77,0.53,0.15,-0.1,-0.19
  camera3                               0.758,0.7,0.38,0,-0.1
  camera4                               -1.256,0.574,0.7,-0.5,-0.38
  camera5                               1.256,0.574,0.7,-0.5,-0.38
  camera6                               0.685,0.504,0.75,-0.013,-0.079
  camera7                               0,0.6,0.75,-0.1,-0.16
  camera8                               1,-0.3,0.6,-0.894,-0.216
}
script-include-table
{
  0                                     <kuid:151055:60049>
}
mesh-table
{
  default
  {
    mesh                                "2te116_interiorA.im"
    auto-create                         1
  }
  speedo_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speedo_needle.im"
    att                                 "a.speedo_needle"
    limits                              0,41.700001
    angles                              0,4.1
    att-parent                          "default"
    test-collisions                     0
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "kontr.IM"
    auto-create                         1
    att                                 "a.km"
    att-parent                          "default"
    limits                              0,8
    angles                              0,4
    radius                              0.01
    mousespeed                          -0.12
    tooltip-text                        "Контроллер"
  }
  independantbrake_lever
  {
    mesh                                "rucka254.IM"
    att                                 "a.254"
    auto-create                         1
    kind                                "lever"
    angles                              0,-2.9
    limits                              0,32
    att-parent                          "default"
    notches                             0,0.4,0.6,0.8,1
    notchheight                         0,0,0,0,0
    radius                              0.01
    mousespeed                          -0.2
    tooltip-text                        "Вспомогательный тормоз"
  }
  trainbrake_lever2
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "rucka394.IM"
    att                                 "a.394"
    limits                              0,100
    angles                              0,-2
    notches                             0,0.25,0.6,0.7,0.8,1
    notchheight                         1,2,2,2,2,2,1,1
    radius                              0.15
    mousespeed                          -1
    tooltip-text                        "Кран машиниста"
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reversor.IM"
    auto-create                         1
    att                                 "a.revers"
    limits                              0,2
    angles                              0,0.6
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          1
    tooltip-text                        "Реверсор"
  }
  clock_hr
  {
    mesh                                "strelka_chasovaya.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,24
    angles                              0,6.283
    att-parent                          "default"
  }
  clock_min
  {
    mesh                                "strelka_minutnaya.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,60
    angles                              0,6.283
    att-parent                          "default"
  }
  napruga_generatora
  {
    mesh                                "st_amp.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.nagr_gen"
    limits                              0,1000
    angles                              0,1.42
    att-parent                          "default"
    value                               -2
  }
  nagruzka_generatora
  {
    mesh                                "st_amp.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.napr_gen"
    limits                              0,6000
    angles                              0,0.81
    att-parent                          "default"
    value                               -2
  }
  tok_zaryada_ab
  {
    mesh                                "st_amp.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tok_zarayda_ab"
    limits                              -150,150
    angles                              -0.9,0.9
    att-parent                          "default"
    value                               -2
  }
  ukaz_povreg
  {
    mesh                                "st_amp.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.up"
    limits                              0,8
    angles                              0,1.6
    att-parent                          "default"
    value                               -2
  }
  bploco_equaliser
  {
    mesh                                "strelka.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.ur"
    limits                              0,1600
    angles                              0,7.2
    att-parent                          "default"
  }
  bplocomain_needle
  {
    mesh                                "strelka_kr.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm"
    limits                              0,1600
    angles                              0,4.2
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    mesh                                "strelka.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm"
    limits                              0,1600
    angles                              0,4.63
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    mesh                                "strelka.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tc"
    limits                              0,1600
    angles                              0,7
    att-parent                          "default"
  }
  pr_tuskl0
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pr_tusklo"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  pr_yarko
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pr_yarko"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  hs03
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs03"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  vent04
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.vent04"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  vent03
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.vent03"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  vent02
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.vent02"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  vent01
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.vent1"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  upravlenie_holodilnikom
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.upr_holod"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  upravlenie_teplovozom
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.upr_tepl"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  dvigenie
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.dvig"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  kontrol_signalisacii
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.kontrol_signalisacii"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  perehody
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.perehody"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  avtopodacha_peska
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs06"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  hs
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  buf_z_pr
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.bf_right_zad"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  buf_z_lev
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.bf_left_zad"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  buf_p_pr
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.bf_pered_right"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  buf_p_lev
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.bf_pered_left"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  switch5
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.svet_kab"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        "Освещение кабины"
  }
  light_pult
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.svet_pult"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  ukazatel_povregdeniy
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.ukaz_povreg"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  povregdenie
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.povregdenie"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  top_nasos1
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.top_nasos1"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  top_nasos2
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.top_nasos2"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  zapusk1
  {
    mesh                                "zap.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.zapusk1"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  zapusk2
  {
    mesh                                "zap.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.zapusk2"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  vyzov
  {
    mesh                                "kn3.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.vysov"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  otpusk_tormoza
  {
    mesh                                "kn3.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.otpusk_tormoza"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  hs02
  {
    mesh                                "kn1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs02"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  hs04
  {
    mesh                                "kn1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs04"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  hs05
  {
    mesh                                "kn2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs05"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          15
    tooltip-text                        ""
  }
  swet_stola
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.upr_holod01"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  als_white
  {
    mesh                                "kn3.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.otpusk_tormoza01"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  ukbm_rb_mehana
  {
    mesh                                "rb.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb_mehana"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  ukbm_rb_mehana_n
  {
    mesh                                "rb.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb_m_niz"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  maslo1
  {
    mesh                                "st_P_masla.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.maslo1"
    limits                              0,10
    angles                              0,1.6
    att-parent                          "default"
    value                               -2
  }
  maslo2
  {
    mesh                                "st_P_masla.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.maslo2"
    limits                              0,10
    angles                              0,1.6
    att-parent                          "default"
    value                               -2
  }
  st_temp_v1
  {
    mesh                                "st_temp_v.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.temperatura_vody1"
    limits                              0,120
    angles                              0,3.53
    att-parent                          "default"
    value                               -2
  }
  st_temp_m1
  {
    mesh                                "st_temp_v.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.temperatura_masla1"
    limits                              0,120
    angles                              0,3.53
    att-parent                          "default"
    value                               -2
  }
  st_temp_v2
  {
    mesh                                "st_temp_v.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.temperatura_vody2"
    limits                              0,120
    angles                              0,3.53
    att-parent                          "default"
    value                               -2
  }
  st_temp_m2
  {
    mesh                                "st_temp_v.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.temperatura_masla2"
    limits                              0,120
    angles                              0,3.53
    att-parent                          "default"
    value                               -2
  }
  tifon_sw
  {
    mesh                                "tifon.IM"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_mehana"
    limits                              -1,1
    angles                              -0.2,0.2
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          5
    tooltip-text                        ""
  }
  tifon_sw1
  {
    mesh                                "tifon.IM"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_pomohi"
    limits                              -1,1
    angles                              -0.2,0.2
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          5
    tooltip-text                        ""
  }
  sbros_nagruzki1
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.sbros_nagruzki1"
    auto-create                         0
    att-parent                          "default"
  }
  sbros_nagruzki2
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.sbros_nagruzki2"
    auto-create                         0
    att-parent                          "default"
  }
  uroven_vody
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.uroven_vody"
    auto-create                         0
    att-parent                          "default"
  }
  davlenie_masla
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.davlenie_masla"
    auto-create                         0
    att-parent                          "default"
  }
  obryv_tm
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.obryv_TM"
    auto-create                         0
    att-parent                          "default"
  }
  zatormogeno
  {
    kind                                "light"
    mesh                                "lampa_white.im"
    att                                 "a.zatormogeno"
    auto-create                         0
    att-parent                          "default"
  }
  silovaya_zachita
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.rz"
    auto-create                         0
    att-parent                          "default"
  }
  ohlagdenie
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.ohlagdenie"
    auto-create                         0
    att-parent                          "default"
  }
  disel2
  {
    kind                                "light"
    mesh                                "lampa_white.im"
    att                                 "a.disel2"
    auto-create                         0
    att-parent                          "default"
  }
  pogar
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.pogar"
    auto-create                         0
    att-parent                          "default"
  }
  rabota_edt1
  {
    kind                                "light"
    mesh                                "lampa_white.im"
    att                                 "a.edt1"
    auto-create                         0
    att-parent                          "default"
  }
  rabota_edt2
  {
    kind                                "light"
    mesh                                "lampa_white.im"
    att                                 "a.edt02"
    auto-create                         0
    att-parent                          "default"
  }
  zachita_edt1
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.zashita_edt01"
    auto-create                         0
    att-parent                          "default"
  }
  zachita_edt2
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.zashita_edt02"
    auto-create                         0
    att-parent                          "default"
  }
  epk
  {
    kind                                "lever"
    mesh                                "epk_key.IM"
    att                                 "a.epk"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,-1.57
    notches                             0,1
    notchheight                         0,0
    tooltip-text                        "Ключ ЭПК"
  }
  pa_loc_sig
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pals"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_ventelyatory_kuzova
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pavk"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_radiostanciya
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.paradiostanciya"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_hs
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pahs"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_progektor
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.paprojector"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_hs1
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pahs1"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_upravlenie_holodilnikom
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pauh"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_kompressor
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pakompressor"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_hs3
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pahs3"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_disel
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.padisel"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_topnasos
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.patopnasos"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_vozbuditel
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pavosbud"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  tum1
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tm1"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              0
    tooltip-text                        ""
  }
  tum2
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tm2"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              0
    tooltip-text                        ""
  }
  bloc
  {
    kind                                "lever"
    mesh                                "rbl367.im"
    att                                 "a.rbl367"
    auto-create                         1
    mousespeed                          -2
    radius                              0.05
    limits                              0,1
    angles                              0,-3.1415
    notches                             0,1
    notchheight                         0,0
    tooltip-text                        ""
  }
  avstopdiselya
  {
    mesh                                "avstopdis.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avstdiz"
    limits                              0,1
    angles                              0,-0.001
    mousespeed                          15
    tooltip-text                        ""
  }
  filtr
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs07"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  bditelnost
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs08"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  holostoy_hod1
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.holostoy_hod1"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  holostoy_hod2
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.holostoy_hod2"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  kontrol_sign
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.kontrol_sig"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  als_0
  {
    mesh                                "alsn_green.IM"
    att                                 "a.alsn"
    kind                                "light"
    auto-create                         0
  }
  als_1
  {
    mesh                                "alsn_yellow.IM"
    att                                 "a.alsn"
    kind                                "light"
    auto-create                         0
  }
  als_2
  {
    mesh                                "alsn_k-g.IM"
    att                                 "a.alsn"
    kind                                "light"
    auto-create                         0
  }
  als_3
  {
    mesh                                "alsn_red.IM"
    att                                 "a.alsn"
    kind                                "light"
    auto-create                         0
  }
  als_4
  {
    mesh                                "alsn_white.IM"
    att                                 "a.alsn"
    kind                                "light"
    auto-create                         0
  }
  kmr
  {
    mesh                                "zap.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.kmr"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  fr_mehana
  {
    mesh                                "fortochka_mehana.im"
    kind                                "animated-lever"
    anim                                "fortochka_mehana.kin"
    auto-create                         1
    att-parent                          "default"
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    test-collisions                     1
    mousemode                           "1"
    mousespeed                          0.5
  }
  paravan_m
  {
    mesh                                "fortochka_paravan_mehana.im"
    auto-create                         1
    kind                                "lever"
    att-parent                          "fr_mehana"
    att                                 "a.fortm"
    angles                              0,-1.57
    notches                             0,1
    notchheight                         0,0
    test-collisions                     1
    mousemode                           "1"
    tooltip-text                        ""
  }
  fr_poma
  {
    mesh                                "fortochka_poma.im"
    kind                                "animated-lever"
    anim                                "fortochka_poma.kin"
    auto-create                         1
    att-parent                          "default"
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    test-collisions                     1
    mousemode                           "1"
    mousespeed                          0.5
  }
  paravan_p
  {
    mesh                                "fortochka_paravan_poma.im"
    auto-create                         1
    kind                                "lever"
    att-parent                          "fr_poma"
    att                                 "a.fortp"
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
    test-collisions                     1
    mousemode                           "1"
    tooltip-text                        ""
  }
  wipers_l_lvr
  {
    kind                                "lever"
    mesh                                "vkluchatel_dvornikov.im"
    auto-create                         1
    att                                 "a.dvornik_pomogaly"
    mousespeed                          0.3
    angles                              0,30
    limits                              0,1
    tooltip-text                        "Левый дворник"
  }
  wipers_r_lvr
  {
    kind                                "lever"
    mesh                                "vkluchatel_dvornikov.im"
    auto-create                         1
    att                                 "a.dvornik_mehana"
    mousespeed                          0.3
    angles                              0,30
    limits                              0,1
    tooltip-text                        "Правый дворник"
  }
  l_wiper
  {
    mesh                                "l_dvor.im"
    auto-create                         1
    att                                 "a.dvpom"
    att-parent                          "default"
    anim                                "l_dvor.kin"
  }
  r_wiper
  {
    mesh                                "r_dvor.im"
    auto-create                         1
    att                                 "a.dvpom01"
    att-parent                          "default"
    anim                                "r_dvor.kin"
  }
  tereze_bok_rain
  {
    mesh                                "okna_rain_bok.im"
    auto-create                         0
    att-parent                          "default"
  }
  tereze_rain_f_m
  {
    mesh                                "okna_rain_f_m.im"
    auto-create                         0
    att-parent                          "default"
  }
  tereze_rain_f_p
  {
    mesh                                "okna_rain_f_p.im"
    auto-create                         0
    att-parent                          "default"
  }
  tereze_rain_c_m
  {
    mesh                                "okna_rain_c_m.im"
    auto-create                         0
    att-parent                          "default"
  }
  tereze_rain_c_p
  {
    mesh                                "okna_rain_c_p.im"
    auto-create                         0
    att-parent                          "default"
  }
  pss1
  {
    kind                                "light"
    mesh                                "lampa_pss.im"
    att                                 "a.pss1"
    auto-create                         0
    att-parent                          "default"
  }
  pss2
  {
    kind                                "light"
    mesh                                "lampa_pss.im"
    att                                 "a.pss2"
    auto-create                         0
    att-parent                          "default"
  }
  tumbler_vkl_ukbm
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.ukbmvkl"
    limits                              0,2
    angles                              0,-0.5
    notches                             0,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  tumbler_proverka_ukbm
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.ukbmtest"
    limits                              0,2
    angles                              0,-0.5
    notches                             0,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  propusk
  {
    kind                                "light"
    mesh                                "propusk.im"
    att                                 "a.propusk"
    auto-create                         0
    att-parent                          "default"
  }
  sl
  {
    kind                                "light"
    mesh                                "sl2m.im"
    auto-create                         0
    att-parent                          "default"
  }
  pisec_skor
  {
    mesh                                "pisec_skor.im"
    auto-create                         1
    att                                 "a.pisec"
    att-parent                          "default"
    anim                                "pisec_skor.kin"
  }
  podsvet_raciy
  {
    kind                                "light"
    mesh                                "podsvet_raciy.im"
    auto-create                         0
    att                                 "a.podsvetka_raciy"
    att-parent                          "default"
  }
  shtora1
  {
    kind                                "animated-lever"
    mesh                                "shtora1.IM"
    anim                                "shtora1.kin"
    att                                 "a.shtorka2"
    auto-create                         1
    mousespeed                          0.5
    limits                              0,1
    test-collisions                     0
    mousemode                           "1"
  }
  shtora2
  {
    kind                                "animated-lever"
    mesh                                "shtora2.IM"
    anim                                "shtora2.kin"
    att                                 "a.shtorka2"
    auto-create                         1
    mousespeed                          0.5
    limits                              0,1
    test-collisions                     0
    mousemode                           "1"
  }
  shtora1_collision
  {
    mesh                                "shtora1coll.im"
    auto-create                         1
    kind                                "collision-proxy"
    att-parent                          "shtora1"
    att                                 "a.st"
    collision-parent                    "shtora1"
    opacity                             1
  }
  shtora2_collision
  {
    mesh                                "shtora2coll.im"
    auto-create                         1
    kind                                "collision-proxy"
    att-parent                          "shtora2"
    att                                 "a.st2"
    collision-parent                    "shtora2"
    opacity                             1
  }
  tereze_rain_b_f_m
  {
    mesh                                "okno_mokroe_fort_m.im"
    auto-create                         0
    att                                 "a.mokr_m"
    att-parent                          "fr_mehana"
  }
  tereze_rain_b_f_p
  {
    mesh                                "okno_mokroe_fort_p.im"
    auto-create                         0
    att                                 "a.mokr_p"
    att-parent                          "fr_poma"
  }
  tereze_rain_paravan_m
  {
    mesh                                "okno_mokroe_paravan_m.im"
    auto-create                         0
    att                                 "a.rain_paravan_mehana"
    att-parent                          "paravan_m"
  }
  tereze_rain_paravan_p
  {
    mesh                                "okno_mokroe_paravan_p.im"
    auto-create                         0
    att                                 "a.rain_paravan_poma"
    att-parent                          "paravan_p"
  }
}
thumbnails
{
  0
  {
    image                               "interior_art/interior_art_512.jpg"
    width                               240
    height                              180
  }
}
kuid                                    <kuid:487016:100697>
kuid-table
{
  0                                     <kuid:151055:60049>
}
Файлы:
chme3_cd.gs	168 B
alsn_and_lamp_light.texture.txt	42 B
alsn_and_lamp_light.jpg	55.0 kB
detali.texture.txt	29 B
alsn_red.im	3.9 kB
chme3_cab2.gs	9.7 kB
avstopdis.im	3.0 kB
alsn_k-g.im	3.9 kB
alsn_yellow.im	3.9 kB
alsn_white.im	3.9 kB
alsn_green.im	3.9 kB
dop.jpg	843.0 kB
dop.texture.txt	26 B
fortochka_mehana.kin	1.0 kB
interior_art
interior_art / interior_art_512.jpg	48.7 kB
fortochka_paravan_poma.im	14.1 kB
fortochka_paravan_mehana.im	16.6 kB
fortochka_poma.kin	1.0 kB
detali.jpg	899.8 kB
el_mano.texture.txt	30 B
fort.texture.txt	27 B
fortochka_mehana.im	17.3 kB
epk_key.im	5.9 kB
kabina.jpg	846.2 kB
kn1.im	1.4 kB
kn2.im	1.4 kB
kn3.im	1.4 kB
kontr.im	27.8 kB
fort.jpg	575.0 kB
el_mano.jpg	530.8 kB
kresla.jpg	925.1 kB
kresla.texture.txt	29 B
lampa_red.im	2.9 kB
okna_rain_bok.im	1.9 kB
lampa_pss.im	5.7 kB
okna_rain_c_m.im	3.3 kB
okna_rain_c_p.im	3.3 kB
okna_rain_f_m.im	3.3 kB
okno_mokroe_fort_p.im	608 B
okno_mokroe_fort_m.im	836 B
okna_rain_f_p.im	3.3 kB
okno_mokroe_paravan_m.im	2.8 kB
okno_mokroe_paravan_p.im	2.8 kB
l_dvor.im	11.5 kB
lampa_white.im	2.9 kB
l_dvor.kin	3.2 kB
kabina.texture.txt	29 B
fortochka_poma.im	17.3 kB
2te116_interiora.im	2.7 MB
panelki_puta.jpg	1.8 MB
panelki_puta.texture.txt	35 B
pisec_skor.kin	10.8 kB
propusk.im	2.7 kB
pisec_skor.im	3.4 kB
rb.im	2.8 kB
r_dvor.im	11.5 kB
r_dvor.kin	3.2 kB
podsvet_raciy.im	9.3 kB
pult_l_off.im	637.3 kB
pult_l_on_dim.im	623.1 kB
rbl367.im	1.9 kB
shtora1coll.im	432 B
reversor.im	14.5 kB
rwipsw.im	1.5 kB
shtora2.im	16.8 kB
sl2m.im	15.1 kB
shtora1.im	16.8 kB
shtora1.kin	2.8 kB
shtora2.kin	2.8 kB
shtora2coll.im	432 B
rucka254.im	25.3 kB
rucka394.im	20.6 kB
pult_l_on_bright.im	637.3 kB
pult_priborov.texture.txt	36 B
pult_priborov.jpg	1.3 MB
sound
sound / brake254.wav	8.3 kB
sound / cabin.txt	1.1 kB
sound / kran_0.wav	31.1 kB
sound / kran_1.wav	43.2 kB
sound / 254_0.wav	158.1 kB
sound / kran_20.wav	188.1 kB
sound / kran_3a.wav	60.3 kB
sound / kran_4.wav	118.5 kB
sound / kran_5.wav	86.2 kB
sound / reverser.wav	12.0 kB
sound / rm_0.wav	701.3 kB
sound / rm_1.wav	174.0 kB
sound / rm_10.wav	195.5 kB
sound / rm_11.wav	340.5 kB
sound / rm_12.wav	224.1 kB
sound / rm_13.wav	334.5 kB
sound / rm_14.wav	393.0 kB
sound / rm_15.wav	305.0 kB
sound / kran_3.wav	181.1 kB
sound / rm_16.wav	153.7 kB
sound / rm_18.wav	287.7 kB
sound / rm_17.wav	221.6 kB
sound / rm_19.wav	555.3 kB
sound / rm_21.wav	547.1 kB
sound / rm_24.wav	472.8 kB
sound / rm_20.wav	362.3 kB
sound / rm_2.wav	311.8 kB
sound / rm_23.wav	417.9 kB
sound / kran_00.wav	225.7 kB
sound / rm_22.wav	254.9 kB
sound / rm_28.wav	614.5 kB
sound / rm_26.wav	614.9 kB
sound / rm_25.wav	348.4 kB
sound / rm_29.wav	442.5 kB
sound / rm_5.wav	380.1 kB
sound / rm_6.wav	429.0 kB
sound / rm_32.wav	345.7 kB
sound / rm_7.wav	404.4 kB
sound / rm_31.wav	560.1 kB
sound / rm_27.wav	448.5 kB
sound / rm_8.wav	286.4 kB
sound / rm_9.wav	241.5 kB
sound / rm_3.wav	449.0 kB
sound / stuk395.wav	6.9 kB
sound / switch.wav	4.0 kB
sound / throttle.wav	13.4 kB
sound / rm_30.wav	356.6 kB
sound / rm_4.wav	175.0 kB
speedo_needle.im	9.0 kB
st_amp.im	1.1 kB
st_p_masla.im	582 B
st_temp_v.im	582 B
stekla-stekla.texture.txt	47 B
steklo_clean-steklo_clean.texture.txt	59 B
steny.texture.txt	28 B
steklo_clean.tga	512.0 kB
stekla.tga	512.0 kB
stol_i_pult.texture.txt	34 B
strelka_chasovaya.im	1.0 kB
strelka.im	8.4 kB
strelka_minutnaya.im	2.3 kB
steklo_rain-steklo_rain.texture.txt	57 B
strelka_kr.im	8.4 kB
tumbler_big.im	9.9 kB
tumbler_m.im	4.7 kB
un_d.texture.txt	27 B
tm_avtomata.im	4.6 kB
steny.jpg	953.4 kB
tifon.im	8.0 kB
steklo_rain.tga	512.0 kB
united_d.texture.txt	31 B
united_d.jpg	1.2 MB
un_d.jpg	1.2 MB
stol_i_pult.jpg	812.1 kB
united_krany.jpg	829.1 kB
united_krany.texture.txt	35 B
united_sl2m.jpg	1.0 MB
zap.im	1.4 kB
united_sl2m.texture.txt	34 B
vkluchatel_dvornikov.im	1.5 kB
united_sl2mon-united_sl2mon.texture.txt	61 B
united_sl2mon.tga	3.0 MB
Общий объём файлов:	36.2 MB
Версии элемента:
kuid	kind	name	build	date	size
<kuid:487016:100697>	interior	Кабина(ТР) 2ТЭ10УТК	3.5	23.07.2020 20:18:29	18.6 MB
Зависимости:
kuid	author	kind	name	build	date	size
<kuid2:151055:60049:4>	Эрендир	library	ALSN Provider	4.5	16.02.2023 21:39:01	472.6 kB
Всего связей: 1, неизвестных связей: 0
Зависимые элементы:
kuid	author	kind	name	build	date	size
<kuid2:487016:100169:1>	#487016	traincar	Тепловоз 2ТЭ10УТК-0079 А	3.7	23.07.2020 20:33:33	15.0 MB
<kuid2:487016:100170:1>	#487016	traincar	Тепловоз 2ТЭ10УТК-0079 Б	3.7	23.07.2020 21:06:12	15.0 MB
<kuid2:487016:100171:1>	#487016	traincar	Тепловоз 2ТЭ10УТК-0078 А	3.7	18.10.2021 19:18:16	8.5 MB
<kuid2:487016:100172:1>	#487016	traincar	Тепловоз 2ТЭ10УТК-0078 Б	3.7	4.11.2021 11:49:37	8.5 MB
<kuid2:487016:100173:1>	#487016	traincar	Тепловоз 2ТЭ10УТК-0408 А	3.7	18.10.2021 19:17:01	8.2 MB
<kuid2:487016:100174:1>	#487016	traincar	Тепловоз 2ТЭ10УТК-0408 Б	3.7	4.11.2021 11:37:58	8.1 MB
<kuid2:487016:100175:2>	#487016	traincar	Тепловоз 2ТЭ10УТК-0091 А	3.7	25.10.2021 20:23:00	13.7 MB
<kuid2:487016:100176:2>	#487016	traincar	Тепловоз 2ТЭ10УТК-0091 Б	3.7	4.11.2021 11:53:47	13.6 MB
<kuid2:487016:100179:1>	#487016	traincar	Тепловоз 2ТЭ10УТК-0096 А	3.7	25.10.2021 20:29:32	14.1 MB
<kuid2:487016:100180:1>	#487016	traincar	Тепловоз 2ТЭ10УТК-0096 Б	3.7	12.01.2021 19:14:32	14.0 MB
<kuid:806431:100439>	#806431	traincar	Тепловоз 2ТЭ10УТК-0070 А	3.7	23.07.2020 21:06:35	13.0 MB
<kuid:806431:100441>	#806431	traincar	Тепловоз 2ТЭ10УТК-0070 Б	3.7	18.10.2021 20:48:02	13.0 MB
<kuid:806431:100442>	#806431	traincar	Тепловоз 2ТЭ10УТК-0480 А	3.7	17.01.2021 0:39:18	7.9 MB
<kuid:806431:100443>	#806431	traincar	Тепловоз 2ТЭ10УТК-0480 Б	3.7	18.05.2023 19:03:08	7.6 MB