<kuid2:69871:2408:1> Klozett RRCo Session 6 -- Hi Capacity Freight

Тип: Сессия
Опубликовано: 22.09.2025 10:49:33
Скачиваний: 5
Размер: 42.4 kB

Скачать

This session is for the Klozett RRCo - Model Trainz Layout.

Chuck and Joe, Yard Master here here.
The Depot Foreman has allocated our little workhorse to you this morning, the 2-4-2T.
Over at Steamship you will find two depressed center flat cars.
Use these to transport:
Machine Crate Load from the Wharf Freight House to ACME, then
84 in Flywheel and 84 in Press Frame from ACME to the hoist at Foundry and finally
citern from ACME to Crane Wharf.
Spot the empty flats back at Steamship.
When finished reposition the locomotive in the Loco Depot and sign off.
Yard Master out.

Use the map view (Ctrl-M toggles on / off in Driver) to locate the industries and freight cars.
All industries have the prefix IND.
Cab Mode is preferable. In DCC Mode the locomotive may not have sufficient power to negotiated the sharp curves.
You can perform the tasks in any sequence you choose.
In this session you will have to perform the task of Load Master to load and unload freight cars.
For instructions about the method to be used, see my post in the Klozett RRCo thread in the N3V Trainz forums. Or search youtube using:
Trainz T:ANE - Loading Freight Cars in Driver

I have added the required commodities to the kuid table of the session but I am not sure if they will be captured by Content Manager. If they are not you will need to manually download five commodities:
84_in_Flywheel_Casting
84_in_Press_Frame_Side
citerne_RB
Machine Crate Load MT Large 1
Machine Crate Load MT Large 2

Good luck.

config.txt:

thumbnails
{
  default
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid                                    <kuid2:69871:2408:1>
kind                                    "profile"
username                                "Klozett RRCo Session 6 -- Hi Capacity Freight"
trainz-build                            4.3
map-kuid                                <kuid2:69871:2315:1>
category-class                          "YP"
category-region                         "00"
category-era                            "2010s"
description                             "This session is for the Klozett RRCo - Model Trainz Layout.

Chuck and Joe, Yard Master here here.
The Depot Foreman has allocated our little workhorse to you this morning, the 2-4-2T.
Over at Steamship you will find two depressed center flat cars.
Use these to transport:
Machine Crate Load from the Wharf Freight House to ACME, then
84 in Flywheel and 84 in Press Frame from ACME to the hoist at Foundry and finally
citern from ACME to Crane Wharf.
Spot the empty flats back at Steamship.
When finished reposition the locomotive in the Loco Depot and sign off.
Yard Master out.

Use the map view (Ctrl-M toggles on / off in Driver) to locate the industries and freight cars.
All industries have the prefix IND.
Cab Mode is preferable. In DCC Mode the locomotive may not have sufficient power to negotiated the sharp curves.
You can perform the tasks in any sequence you choose.
In this session you will have to perform the task of Load Master to load and unload freight cars.
For instructions about the method to be used, see my post in the Klozett RRCo thread in the N3V Trainz forums.  Or search youtube using:
Trainz T:ANE - Loading Freight Cars in Driver

I have added the required commodities to the kuid table of the session but I am not sure if they will be captured by Content Manager.  If they are not you will need to manually download five commodities:
84_in_Flywheel_Casting
84_in_Press_Frame_Side
citerne_RB
Machine Crate Load MT Large 1
Machine Crate Load MT Large 2

Good luck."
string-table
{
  loco_30ng_2-4-2t_1                    "Loco 30ng 2-4-2T 1"
  30ng_flat_depressed_center_hicap_-_bogey_assembly_3"30ng Flat Depressed Center HiCap - Bogey Assembly 3"
  30ng_flat_depressed_center_hicap_-_platform_1"30ng Flat Depressed Center HiCap - Platform 1"
  30ng_flat_depressed_center_hicap_-_bogey_assembly_4"30ng Flat Depressed Center HiCap - Bogey Assembly 4"
  30ng_flat_depressed_center_hicap_-_bogey_assembly_2"30ng Flat Depressed Center HiCap - Bogey Assembly 2"
  30ng_flat_depressed_center_hicap_-_platform_2"30ng Flat Depressed Center HiCap - Platform 2"
  30ng_flat_depressed_center_hicap_-_bogey_assembly_1"30ng Flat Depressed Center HiCap - Bogey Assembly 1"
  ind_steamship_wharf                   "IND Steamship Wharf"
  ind_acme_industries                   "IND ACME Industries"
  ind_stuff_manufacturing               "IND Stuff Manufacturing"
  ind_things_manufacturing              "IND Things Manufacturing"
  ind_doofore_manufacturing             "IND Doofore Manufacturing"
  ind_s_&_t_manufacturing               "IND S & T Manufacturing"
  ind_crane_wharf_log_deck              "IND Crane Wharf Log Deck"
  ind_wharf_feright_house               "IND Wharf Feright House"
  ind_klozett_freight_house             "IND Klozett Freight House"
  commercial_coal_company_1             "Commercial_Coal_Company 1"
  ind_foundry_aggregates_&_fuel         "IND Foundry Aggregates & Fuel"
  ind_foundry_hoist                     "IND Foundry Hoist"
  ind_commercial_coal_company           "IND Commercial Coal Company"
  ind_aggregates_wharf                  "IND Aggregates Wharf"
  ind_mill_yard_deck                    "IND Mill Yard Deck"
  ind_loco_depot_1                      "IND Loco Depot 1"
  ind_loco_depot_2                      "IND Loco Depot 2"
  ind_loco_water                        "IND Loco Water"
  ind_crane_wharf                       "IND Crane Wharf"
  ind_mill_yard                         "IND Mill Yard"
  ind_fuel_dock                         "IND Fuel Dock"
  ind_s_&_t_fuels                       "IND S & T Fuels"
}
rule-data
{
}
kuid-table
{
  0                                     <kuid:44179:60013>
  1                                     <kuid2:60850:89003:1>
  2                                     <kuid2:69871:2315:1>
  3                                     <kuid2:69871:2350:1>
  4                                     <kuid2:69871:2405:1>
  5                                     <kuid2:69871:2406:1>
  6                                     <kuid2:210518:10721:1>
  7                                     <kuid2:210518:10736:1>
  8                                     <kuid:244265:1642>
  9                                     <kuid:252585:281070600>
  10                                    <kuid:252585:281070601>
  11                                    <kuid:401543:1090>
  12                                    <kuid:401543:1180>
  13                                    <kuid:401543:1184>
  14                                    <kuid:401543:3203>
  15                                    <kuid:-25:1026>
  16                                    <kuid:-16:2025>
  17                                    <kuid:-3:10004>
  18                                    <kuid:-3:10057>
  19                                    <kuid:-3:10058>
  20                                    <kuid:-3:10076>
  21                                    <kuid:-3:10077>
  22                                    <kuid:-3:10078>
  23                                    <kuid:-3:10081>
  24                                    <kuid:-3:10082>
  25                                    <kuid:-3:10083>
  26                                    <kuid:-3:10090>
  27                                    <kuid:-3:10186>
  28                                    <kuid:-3:10206>
  29                                    <kuid:-3:11149>
  30                                    <kuid:-3:11209>
}

Файлы:

profile.lyr	28 B
profile.rlr	36 B
profile.trk	68 B
profile.obs	36 B
thumbnail.jpg	34.9 kB
profile.dat	30.2 kB
Общий объём файлов:	65.3 kB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:69871:2408:1>	profile	Klozett RRCo Session 6 -- Hi Capacity Freight	4.3	22.09.2025 10:49:33	42.4 kB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-25:1026>	#-25	drivercharacter	Charlie	2.9	21.04.2023 16:12:51	21.1 kB
<kuid:-16:2025>	#-16	behavior	Настройки машиниста	3.4	1.03.2020 18:12:47	25.1 kB
<kuid:-3:10004>	#-3	product	Вода	0	20.10.2022 23:31:06	5.6 kB
<kuid:-3:10057>	#-3	behavior	Команды машиниста	0	1.12.2022 1:16:49	11.4 kB
<kuid:-3:10058>	#-3	drivercommand	Ехать к	4.5	25.11.2022 22:40:22	17.7 kB
<kuid:-3:10076>	#-3	drivercommand	Load	0	25.11.2022 23:01:32	20.6 kB
<kuid:-3:10077>	#-3	drivercommand	Unload	0	25.11.2022 22:48:42	20.4 kB
<kuid:-3:10078>	#-3	drivercommand	Notify	0	25.11.2022 23:05:31	18.5 kB
<kuid:-3:10081>	#-3	drivercommand	Couple	0	2.12.2022 19:34:51	9.3 kB
<kuid:-3:10082>	#-3	drivercommand	Decouple	0	2.12.2022 19:36:11	7.0 kB
<kuid:-3:10083>	#-3	drivercommand	Развернуть	0	25.11.2022 22:46:23	26.3 kB
<kuid:-3:10090>	#-3	drivercommand	Ждать	0	25.11.2022 23:03:25	21.7 kB
<kuid:-3:10186>	#-3	drivercommand	Расписание движения	0	1.03.2020 18:12:47	9.4 kB
<kuid:-3:10206>	#-3	behavior	Display Custom HUD	0	29.11.2022 4:31:59	11.4 kB
<kuid:-3:11149>	#-3	Unknown
<kuid:-3:11209>	#-3	drivercommand	Drive Via Trackmark	0	19.12.2022 22:55:48	14.7 kB
<kuid2:44179:60013:4>	#44179	product	Уголь	3.7	30.10.2020 22:44:39	1.5 MB
<kuid2:60850:89003:1>	#60850	behavior	Убрать сошедшие с рельс поезда	2.7	1.03.2020 18:12:47	18.0 kB
<kuid2:69871:2315:1>	#69871	map	The Klozett RRCo - NG Model Trainz Layout	4.3	22.09.2025 10:49:40	50.2 kB
<kuid2:69871:2350:1>	#69871	traincar	Loco 30ng 2-4-2T	3.5	12.01.2021 22:34:29	2.8 MB
<kuid2:69871:2405:1>	#69871	traincar	30ng Flat Depressed Center HiCap - Bogey Assembly	3.5	16.07.2020 16:35:59	530.8 kB
<kuid2:69871:2406:1>	#69871	traincar	30ng Flat Depressed Center HiCap - Platform	3.5	15.09.2023 4:53:55	1.0 MB
<kuid2:210518:10721:1>	#210518	product	84_in_Flywheel_Casting	2.9	2.08.2020 10:23:37	406.5 kB
<kuid2:210518:10736:1>	#210518	product	84_in_Press_Frame_Side	2.9	2.07.2020 10:39:05	23.0 kB
<kuid:244265:1642>	#244265	product	citerne_RB	2	12.01.2021 18:45:41	283.8 kB
<kuid:252585:281070600>	#252585	product	Machine Crate Load MT Large 1	3.7	23.07.2020 20:43:02	1.1 MB
<kuid:252585:281070601>	#252585	product	Machine Crate Load MT Large 2	3.7	2.08.2020 9:50:54	1.0 MB
<kuid:401543:1090>	#401543	drivercommand	Halt Train	2.9	25.11.2022 22:44:02	6.5 kB
<kuid:401543:1180>	#401543	behavior	ConsistDataHandler rule	2.9	1.03.2020 18:12:47	45.2 kB
<kuid2:401543:1184:2>	#401543	behavior	Правило QuickDrive	3.4	6.12.2020 10:00:56	156.1 kB
<kuid2:401543:3203:1>	#401543	behavior	Interlocking Tower Path Selection UI	4.3	5.05.2020 12:29:06	37.1 kB
Всего связей: 31, неизвестных связей: 1

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет