<kuid2:69871:2300:1> Loco NG 3ft Uintah #51

Тип: traincar
Опубликовано: 24.07.2020 19:39:13
Скачиваний: 49
Размер: 80.0 kB

Скачать

This is the work of Ben Neal, bdaneal. All I have done is make mofifications so that it work in Cab Mode in T:ANE.

Uintah Railway 51 was the second and final 2-6-6-2T articulated built for the Uintah. She was delivered to Mack, Colorado aboard Lehigh Valley flatcar 9952, the same car that 50 had been delivered on two years prior. Unloading was accomplished with help from Uintah 12, a former F&CC 2-8-0, and D&RGW crane 026.
51 was built to the same design as 50, but with improvements that made it better suited for work on the Uintah. As delivered, 51 was able to run on Morro Castle (a section of track with a 7.5% grade and 87 foot diameter curves), which 50 was unable to when it was built. 50 derailed on all of its tests on Morro Castle. 51, though, didn't thanks to a large block of concrete on the front engine, and an improved steam delivery system. Other changes to 51 included a larger coal bunker, and relocated air compressors.
When the Uintah was abandoned, 50 and 51 were sold to the Sumpter Valley Railroad of Oregon, leaving on board Lehigh Valley flatcar 9952. On the Sumpter Valley, they were renumbered to 250 and 251. They also lost their sidetanks, and aquired the tenders from a pair of Alco 2-8-2s that were requisitioned by the US Army for the White Pass & Yukon. After the Sumpter Valley job, both travelled again, this time to International Railways of Central America in Guatemala. They remained there until 1970, when they were both cut up. The tenders survived, and currently reside on the Sumpter Valley, behind a pair of Alco 2-8-2s.
Brass models have been imported by various importers in various scales over the years. These are the prototypes for the Mantua 2-6-6-2/2-6-6-2T, still available from Model Power. LGB has also made models of these in G scale.
Wheel arrangment 2-6-6-2T
Builder Baldwin
Bulder's Number 60470
Built April 1928
Driver size 42 inch
Cylinders 15 x 22 inch
Gauge 3 foot
Tractive Effort 42,100 lbs
Weight 244,400 lbs

Notes: Thanks to slugsmasher (Rich Blake) for rendering the cab and RPearson (Robert Pearson) for making the cabin script.

config.txt:

category-class                          "AT"
kuid                                    <kuid2:69871:2300:1>
kind                                    "traincar"
company                                 "Uintah Railway"
mass                                    114859
engine                                  1
fonts                                   0
enginespec                              <kuid:69871:100867>
enginesound                             <kuid:126323:53050>
hornsound                               <kuid:43955:54003>
interior                                <kuid:523:19721258>
description                             "This is the work of Ben Neal, bdaneal.  All I have done is make mofifications so that it work in Cab Mode in T:ANE.

Uintah Railway 51 was the second and final 2-6-6-2T articulated built for the Uintah. She was delivered to Mack, Colorado aboard Lehigh Valley flatcar 9952, the same car that 50 had been delivered on two years prior. Unloading was accomplished with help from Uintah 12, a former F&CC 2-8-0, and D&RGW crane 026.
51 was built to the same design as 50, but with improvements that made it better suited for work on the Uintah. As delivered, 51 was able to run on Morro Castle (a section of track with a 7.5% grade and 87 foot diameter curves), which 50 was unable to when it was built. 50 derailed on all of its tests on Morro Castle. 51, though, didn't thanks to a large block of concrete on the front engine, and an improved steam delivery system. Other changes to 51 included a larger coal bunker, and relocated air compressors.
When the Uintah was abandoned, 50 and 51 were sold to the Sumpter Valley Railroad of Oregon, leaving on board Lehigh Valley flatcar 9952. On the Sumpter Valley, they were renumbered to 250 and 251. They also lost their sidetanks, and aquired the tenders from a pair of Alco 2-8-2s that were requisitioned by the US Army for the White Pass & Yukon. After the Sumpter Valley job, both travelled again, this time to International Railways of Central America in Guatemala. They remained there until 1970, when they were both cut up. The tenders survived, and currently reside on the Sumpter Valley, behind a pair of Alco 2-8-2s.
Brass models have been imported by various importers in various scales over the years. These are the prototypes for the Mantua 2-6-6-2/2-6-6-2T, still available from Model Power. LGB has also made models of these in G scale. 
Wheel arrangment		2-6-6-2T
Builder			Baldwin
Bulder's Number		60470
Built			April 1928
Driver size			42 inch
Cylinders			15 x 22 inch
Gauge 			3 foot
Tractive Effort		42,100 lbs
Weight			244,400 lbs

Notes: Thanks to slugsmasher (Rich Blake) for rendering the cab and RPearson (Robert Pearson) for making the cabin script."
light_color                             255,204,0
mesh-table
{
  default
  {
    mesh                                "ury51rear_body/lod1.im"
    auto-create                         1
  }
}
bogeys
{
  0
  {
    bogey                               <kuid2:69871:2302:1>
    reversed                            0
  }
  1
  {
    bogey                               <kuid2:69871:2301:1>
    reversed                            0
  }
}
smoke0
{
  attachment                            "a.stack"
  mode                                  "speed"
  color                                 122,122,122,75
  start                                 0
  rate                                  4
  velocity                              2
  lifetime                              4
  minsize                               0.3
  maxsize                               2
  accel                                 0.2,0.2,-1
}
smoke1
{
  attachment                            "a.stack"
  mode                                  "anim"
  color                                 122,122,122,255
  start                                 0.5
  period                                0.1
  rate                                  8
  velocity                              6
  lifetime                              6
  minsize                               0.5
  maxsize                               12
  accel                                 0.2,0.2,-1
}
smoke2
{
  attachment                            "a.stack"
  mode                                  "anim"
  color                                 122,122,122,255
  start                                 0.25
  period                                0.1
  rate                                  8
  velocity                              6
  lifetime                              6
  minsize                               0.5
  maxsize                               12
  accel                                 0.2,0.2,-1
}
smoke3
{
  attachment                            "a.stack"
  mode                                  "anim"
  color                                 122,122,122,255
  start                                 0.75
  period                                0.1
  rate                                  8
  velocity                              6
  lifetime                              6
  minsize                               0.5
  maxsize                               12
  accel                                 0.2,0.2,-1
}
smoke4
{
  attachment                            "a.stack"
  mode                                  "anim"
  color                                 122,122,122,255
  start                                 0.001
  period                                0.1
  rate                                  8
  velocity                              6
  lifetime                              6
  minsize                               0.5
  maxsize                               12
  accel                                 0.2,0.2,-1
}
smoke5
{
  attachment                            "a.stack"
  mode                                  "speed"
  color                                 76,76,76,255
  start                                 14
  rate                                  5
  velocity                              6
  lifetime                              5
  minsize                               0.7
  maxsize                               13
  accel                                 0.2,0.2,-1
}
smoke6
{
  attachment                            "a.generator"
  mode                                  "speed"
  color                                 255,255,255,175
  start                                 0
  rate                                  8
  velocity                              3
  lifetime                              3
  minsize                               0.1
  maxsize                               2
  accel                                 0.2,0.2,0.5
}
smoke7
{
  attachment                            "a.whistle"
  mode                                  "whistle"
  color                                 255,255,255,250
  start                                 0
  rate                                  12
  velocity                              6
  lifetime                              3
  minsize                               0.2
  maxsize                               2
  accel                                 0.1,0.1,0.25
}
smoke8
{
  attachment                            "a.clyR"
  mode                                  "anim"
  color                                 255,255,255,150
  start                                 0.5
  period                                0.2
  rate                                  2
  velocity                              1
  lifetime                              2
  minsize                               0.1
  maxsize                               1
}
smoke9
{
  attachment                            "a.clyL"
  mode                                  "anim"
  color                                 255,255,255,150
  start                                 0.5
  period                                0.2
  rate                                  2
  velocity                              1
  lifetime                              2
  minsize                               0.1
  maxsize                               1
}
smoke10
{
  attachment                            "a.stack"
  mode                                  "speed"
  color                                 122,122,122,175
  start                                 1
  rate                                  12
  velocity                              6
  lifetime                              3
  minsize                               0.5
  maxsize                               12
  accel                                 0.2,0.2,-1
}
queues
{
  load-coal
  {
    size                                35000
    initial-count                       35000
    product-kuid                        <kuid:44179:60013>
  }
  load-water
  {
    size                                5000
    initial-count                       5000
    product-kuid                        <kuid:-3:10004>
  }
}
trainz-build                            3.5
asset-filename                          "ury51"
username                                "Loco NG 3ft Uintah #51"
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
author                                  "philskene"
organisation                            "Sub-Par Productions/Trainz Narrowgaugers"
contact-email                           "philskene@hotmail.com"
contact-website                         "www.steammachine.com/bdaneal"
license                                 "You may not sell this package. You may not claim it as your own. You may not upload this to any other website without my permission.
If you wish to modify the mesh, contact me. You may repaint as long as you alias the original mesh. Do not include the mesh in your upload.
All items are presented as is, no warranty is included nor implied. I doubt this would cause any damage to your computer, but if it does I may not be held liable.
The contents of this package are copyright 2005 Ben Neal, unless otherwise noted in the readme.
Thank you for your cooperation."
kuid-table
{
  0                                     <kuid2:69871:2302:1>
  1                                     <kuid2:69871:2301:1>
  3                                     <kuid:69871:100867>
  4                                     <kuid:523:19721258>
  5                                     <kuid:126323:53050>
  6                                     <kuid:43955:54003>
  7                                     <kuid:44179:60013>
  8                                     <kuid:-3:10004>
}

Файлы:

ury51_art
ury51_art / russell_art_icon.bmp	24.1 kB
ury51_art / russell_art_icon_a.bmp	24.1 kB
ury51_art / russell_art_preview.bmp	192.1 kB
ury51_art / ury51_art_icon.texture.txt	81 B
ury51_art / ury51_art_512.texture.txt	89 B
ury51_art / russell_art_preview_a.bmp	192.1 kB
ury51rear_body
ury51rear_body / lod1.im	2.6 kB
ury51rear_body / boundingbox.bmp	822 B
ury51rear_body / boundingbox-boundingbox.texture.txt	57 B
readme.txt	2.4 kB
steamlocomotive.gs	14.0 kB
thumbnail.jpg	18.0 kB
Общий объём файлов:	470.2 kB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:69871:2300:1>	traincar	Loco NG 3ft Uintah #51	3.5	24.07.2020 19:39:13	80.0 kB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-3:10004>	#-3	product	Вода	0	20.10.2022 23:31:06	5.6 kB
<kuid:523:19721258>	#523	Unknown
<kuid:43955:54003>	#43955	hornsound	K-27 Whistle	1.5	24.06.2020 11:35:05	279.3 kB
<kuid2:44179:60013:4>	#44179	product	Уголь	3.7	30.10.2020 22:44:39	1.5 MB
<kuid2:69871:2301:1>	#69871	bogey	ury51rearbog	3.5	23.07.2020 21:01:18	2.1 MB
<kuid2:69871:2302:1>	#69871	bogey	ury51frontbog	3.5	12.07.2020 22:37:05	881.0 kB
<kuid2:69871:100867:2>	#69871	steam-engine	VR S enginespec 09 revised	2.9	24.06.2020 9:37:24	15.9 kB
<kuid2:126323:53050:2>	#126323	enginesound	Steam Engine Sound - 2 cylinder	2.8	19.04.2023 14:47:45	1.5 MB
Всего связей: 8, неизвестных связей: 1

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет