<kuid2:914307:100142:3> Кабина 2ТЭ10 на 8 позиций-зеленая

Тип: Кабина
Опубликовано: 12.05.2025 16:25:40
Скачиваний: 292
Размер: 34.0 MB
Скачать

Кабина 2ТЭ10М-зеленая
config.txt:
category-class                          "ZI"
category-region                         "RU"
category-era                            "1970s;1980s;1990s;2000s"
username                                "Cabin 2TE10 cab for 8 position-sgray"
username-ru                             "Кабина 2ТЭ10 на 8 позиций-зеленая"
kind                                    "interior"
script                                  "xT10m_new_interior.gs"
class                                   "XT10M_new_interior"
cameradefault                           2
author                                  "AGON"
description                             "Cabin 2TE10-Green cab for 8 positions"
description-ru                          "Кабина 2ТЭ10М-зеленая"
trainz-build                            4.6
enable-shadows-in-cab                   1
outside-visible-from-cabin              0
cabin-visible-from-outside              0
interior-controls-type                  "full"
controlset                              <kuid2:151055:60033:2>
mesh-table-lod-transition-distances     1000
script-include-table
{
  0                                     <kuid:914307:141000>
  lsf-core-library                      <kuid:151055:60067>
}
extensions
{
  sound-length-base
  {
    epv-whistle_loop.wav                "0.464"
    epv-whistle_start.wav               "0.336"
    epv-whistle_stop.wav                "0.347"
  }
  alsn-settings
  {
    sound-start                         "epv-whistle_start.wav"
    sound-loop                          "epv-whistle_loop.wav"
    sound-end                           "epv-whistle_stop.wav"
    blocks                              128
    attsound                            "a.epv"
    control-epvkey                      "epk"
    control-rbbutton                    "ukbm_rb"
    control-skbbutton                   "ukbm_skb"
    control-skzhbutton                  "ukbm_sry"
    control-vkbutton                    "ukbm_vk"
    control-filterswitch                "als_filter_switch"
    mesh-alsgreenindicator              "als_0"
    mesh-alsyellowindicator             "als_1"
    mesh-alsredyellowindicator          "als_2"
    mesh-alsredindicator                "als_3"
    mesh-alswhiteindicator              "als_4"
    mesh-pssleftindicator               "ukbm_lb_light"
    mesh-passdimlyindicator             "ukbm_lp_light"
  }
}
soundscript
{
  394_v_start
  {
    repeat-delay                        0.01
    distance                            1.5,2
    attachment                          "a.trainbrake"
    trigger                             "394_v_1"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/394-v_start.wav"
    }
  }
  394_v_loop
  {
    repeat-delay                        0,0
    distance                            1.5,2
    attachment                          "a.trainbrake"
    trigger                             "394_v_2"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/394-v_loop.wav"
    }
  }
  394_va_start
  {
    repeat-delay                        0.01
    distance                            1.5,2
    attachment                          "a.trainbrake"
    trigger                             "394_va_1"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/394-va_start.wav"
    }
  }
  394_va_loop
  {
    repeat-delay                        0,0
    distance                            1.5,2
    attachment                          "a.trainbrake"
    trigger                             "394_va_2"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/394-va_loop.wav"
    }
  }
  394_stab
  {
    repeat-delay                        0,0
    distance                            0.1,0.5
    attachment                          "a.trainbrake"
    trigger                             "stab"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/stab_klap.wav"
    }
  }
  sl2m
  {
    repeat-delay                        0,0
    distance                            0.03,0.05
    attachment                          "a.clock"
    trigger                             "sl2m"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/sl2m.wav"
    }
  }
  time
  {
    repeat-delay                        0,0
    distance                            0.03,0.05
    attachment                          "a.clock"
    trigger                             "time"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/time.wav"
    }
  }
}
cameralist
{
  camera0                               -1.257,0.515,0.7,0.504,-0.279
  camera1                               0.619,0.57,0.352,0.018,-0.226
  camera2                               -0.88,0.281,0.441,0.023,-0.435
  camera3                               -1.112,-0.774,0.403,-0.004,-1.195
  camera4                               -0.008,0.256,0.92,3.133,-0.012
  camera5                               -0.107,0.089,-0.5,-0.021,-0.134
  camera6                               1,-0.3,0.6,-0.803,-0.24
  camera7                               0.001,0.46,0.75,0.008,-0.306
  camera8                               0.685,0.504,0.75,0.008,-0.277
  camera9                               1.25,0.509,0.774,-0.254,-0.111
}
mesh-table
{
  default
  {
    mesh                                "2te10cab.im"
    auto-create                         1
    anim                                "2te10cab.kin"
  }
  contr_m
  {
    mesh                                "Throttle_ring.IM"
    kind                                "lever"
    att                                 "a.throtte"
    auto-create                         1
    angles                              0,5.235
    limits                              0,15
    notches                             0,0.067,0.134,0.2,0.27,0.34,0.4,0.47,0.54,0.6,0.67,0.74,0.8,0.87,0.94,1
    notchheight                         0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    radius                              0.1
    mousespeed                          0.6
    mousemode                           "exact"
  }
  revers
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "reverser_lever.IM"
    att                                 "a.reverser_lever"
    limits                              -1,1
    angles                              -0.55,0.55
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.05
  }
  kran_394
  {
    mesh                                "trainbrake.IM"
    att                                 "a.trainbrake"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              -0.35,-2.6
    notches                             0,0.31,0.465,0.558,0.612,0.698,1
    notchheight                         0,0,0,0,0,0,0
    radius                              0.15
    mousespeed                          -0.5
  }
  kran_254
  {
    mesh                                "trainbrake2.IM"
    att                                 "a.locobrake_handle"
    auto-create                         1
    kind                                "lever"
    angles                              0,-2.97
    limits                              0,1
    notches                             0.02,0.255,0.51,0.765,1
    notchheight                         0,0,0,0,0,0
    radius                              0.09
    mousespeed                          -0.8
  }
  bloc
  {
    mesh                                "brake_block_lever.IM"
    kind                                "lever"
    auto-create                         0
    att                                 "a.brake_block_lever"
    angles                              3.15,0
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    test-collisions                     1
    mousespeed                          -0.5
  }
  strelka_ur
  {
    mesh                                "black_needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.equalizer_needle"
    limits                              0,1000
    angles                              0,4.77
    test-collisions                     0
  }
  strelka_gr
  {
    mesh                                "red_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.reservoir_needle"
    limits                              0,1600
    angles                              0,4.75
    test-collisions                     0
  }
  strelka_tm
  {
    mesh                                "black_needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.brakepipe_needle"
    limits                              0,1600
    angles                              0,4.69
    test-collisions                     0
  }
  strelka_tc
  {
    mesh                                "brakecylinder_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.brakecylinder_needle"
    limits                              0,1600
    angles                              0,4.75
    test-collisions                     0
  }
  gu_needle
  {
    mesh                                "elect_needle3.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.voltmeter_needle"
    limits                              0,1000
    angles                              0,1.6
    test-collisions                     0
  }
  gi_needle
  {
    mesh                                "elect_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.ampmeter_needle"
    limits                              0,6000
    angles                              0,1.54
    test-collisions                     0
  }
  watertemperature_needle
  {
    mesh                                "t_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.t_water"
    anim                                "t_needle.kin"
    limits                              0,120
  }
  oiltemperature_needle
  {
    mesh                                "t_needle.im"
    auto-create                         1
    att                                 "a.t_oil"
    anim                                "t_needle.kin"
  }
  watertemperature2_needle
  {
    mesh                                "t_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.t_water2"
    anim                                "t_needle.kin"
    limits                              0,120
  }
  oiltemperature2_needle
  {
    mesh                                "t_needle.im"
    auto-create                         1
    att                                 "a.t_oil2"
    anim                                "t_needle.kin"
  }
  watertemperature3_needle
  {
    mesh                                "t_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.t_water3"
    anim                                "t_needle.kin"
    limits                              0,120
  }
  oiltemperature3_needle
  {
    mesh                                "t_needle.im"
    auto-create                         1
    att                                 "a.t_oil3"
    anim                                "t_needle.kin"
  }
  tok_zaryada_ab
  {
    mesh                                "elect_needle2.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bat_needle"
    limits                              -150,150
    angles                              -0.73,0.73
    test-collisions                     0
  }
  maslo1
  {
    mesh                                "str.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.oilpressure"
    limits                              0,15
    angles                              0,2
    test-collisions                     0
  }
  maslo2
  {
    mesh                                "str.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.oilpressure2"
    limits                              0,15
    angles                              0,2
    test-collisions                     0
  }
  maslo_str
  {
    mesh                                "maslo_str.im"
    auto-create                         1
    att                                 "a.str"
    att-parent                          "maslo1"
    anim                                "maslo_str.kin"
  }
  maslo2_str
  {
    mesh                                "maslo2_str.im"
    auto-create                         1
    att                                 "a.str"
    att-parent                          "maslo2"
    anim                                "maslo2_str.kin"
  }
  sl2m
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speedo_needle.im"
    att                                 "a.speedo_needle"
    limits                              0,48
    angles                              0,4.107
    test-collisions                     0
  }
  tifon
  {
    mesh                                "horn.im"
    kind                                "pulllever"
    auto-create                         1
    att                                 "a.horn"
    angles                              -0.09,0.09
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.05
    mousespeed                          -1
  }
  cl_bright_switch
  {
    mesh                                "smtum.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.Cab_light_High"
    angles                              0.5,-0.5
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
    mousespeed                          2
  }
  cl_gauges_switch
  {
    mesh                                "smtum.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.gauge_backlight_swich"
    angles                              0.5,-0.5
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
    mousespeed                          2
  }
  pr_yarko
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.headlight_high"
    angles                              0.35,-0.35
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.05
    mousespeed                          2
  }
  prog_tusklo
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.headlight_low"
    angles                              0.35,-0.35
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.05
    mousespeed                          2
  }
  dl_al_switch
  {
    mesh                                "smtum.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.ditch_left_forward_switch"
    angles                              0.5,-0.5
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
    mousespeed                          2
  }
  dl_ar_switch
  {
    mesh                                "smtum.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.ditch_right_forward_switch"
    angles                              0.5,-0.5
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
    mousespeed                          2
  }
  dl_bl_switch
  {
    mesh                                "smtum.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.ditch_left_back_switch"
    angles                              0.5,-0.5
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
    mousespeed                          2
  }
  dl_br_switch
  {
    mesh                                "smtum.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.ditch_right_back_switch"
    angles                              0.5,-0.5
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
    mousespeed                          2
  }
  arts_manual_switch
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.managment_a_refrigerator"
    angles                              -0.35,0.35
    notches                             0,1
    notchheight                         0,0,0
    limits                              0,1
    radius                              0.035
    mousespeed                          -2
  }
  atrs_oilntopshutters_switch
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.shutters_oil_overhead"
    angles                              0.35,-0.35
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
    mousespeed                          2
  }
  atrs_topshutters_switch
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.shutters_overhead"
    angles                              0.35,-0.35
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
    mousespeed                          2
  }
  atrs_waterntopshutters_switch
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.shutters_switch"
    angles                              0.35,-0.35
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
    mousespeed                          2
  }
  atrs_fan_switch
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.shutters_switch01"
    angles                              0.35,-0.35
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
    mousespeed                          2
  }
  di2_switch
  {
    mesh                                "smtum.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.pointer_of_damages2"
    angles                              -0.5,0.5
    limits                              0,1
    notches                             0,1
    notchheight                         0,0,0
    radius                              0.035
    mousespeed                          2
  }
  di3_switch
  {
    mesh                                "smtum.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.pointer_of_damages3"
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.05
    mousespeed                          2
  }
  firewarning_switch
  {
    mesh                                "smtum.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.fire_warning_switch"
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.05
    mousespeed                          2
  }
  oilpressure_switch
  {
    mesh                                "smtum.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.pressure_of_oil"
    angles                              -0.5,0.5
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.05
    mousespeed                          2
  }
  idle2_switch
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.idling2"
    angles                              0.35,-0.35
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
    mousespeed                          2
  }
  idle3_switch
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.idling3"
    angles                              0.35,-0.35
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
    mousespeed                          2
  }
  tmfielddivertion_switch
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.weakening_of_excitation"
    angles                              -0.35,0.35
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
    mousespeed                          2
  }
  als_filter_switch
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.filter_alsn"
    angles                              0.35,-0.35
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.05
    mousespeed                          2
  }
  fuelpump1_switch
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.fuel_pump1"
    angles                              0.35,-0.35
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
    mousespeed                          2
  }
  fuelpump2_switch
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.fuel_pump2"
    angles                              0.35,-0.35
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
    mousespeed                          2
  }
  fuelpump3_switch
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.fuel_pump3"
    angles                              0.35,-0.35
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
    mousespeed                          2
  }
  lococontrol_switch
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.managment_diesel"
    angles                              0.35,-0.35
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
    mousespeed                          2
  }
  vigilance_switch
  {
    mesh                                "tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.vigilance"
    angles                              0.35,-0.35
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.05
    mousespeed                          2
  }
  atm_radio_switch
  {
    mesh                                "Radio_lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.radio_switch"
    angles                              0.43,-0.43
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
    mousespeed                          3
  }
  atm_fuelpump_switch
  {
    mesh                                "Radio_lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.fuel_pump"
    angles                              0.43,-0.43
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
    mousespeed                          3
  }
  atm_dieselrun_switch
  {
    mesh                                "Radio_lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.work_of_disel"
    angles                              0.43,-0.43
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
    mousespeed                          3
  }
  atm_shutters_switch
  {
    mesh                                "Radio_lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.shutters"
    angles                              0.43,-0.43
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
    mousespeed                          3
  }
  atm_firewarning_switch
  {
    mesh                                "Radio_lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.fire_warning"
    angles                              0.43,-0.43
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
    mousespeed                          3
  }
  atm_siglightdevices_switch
  {
    mesh                                "Radio_lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.light_devices"
    angles                              0.43,-0.43
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
    mousespeed                          3
  }
  atm_fan_switch
  {
    mesh                                "Radio_lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.ventilator"
    angles                              0.43,-0.43
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
    mousespeed                          3
  }
  atm_mainminus_switch
  {
    mesh                                "Radio_lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.minus"
    angles                              0.43,-0.43
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
    mousespeed                          3
  }
  atm_mainplus_switch
  {
    mesh                                "Radio_lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.plus"
    angles                              0.43,-0.43
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
    mousespeed                          3
  }
  atm_control_switch
  {
    mesh                                "Radio_lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.automat_upravleniya"
    angles                              0.43,-0.43
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
    mousespeed                          3
  }
  atm_calorifer_switch
  {
    mesh                                "Radio_lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.kalarifer"
    angles                              0.43,-0.43
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
    mousespeed                          3
  }
  start1_button
  {
    mesh                                "redb.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.button_start1"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          5
  }
  start2_button
  {
    mesh                                "redb.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.button_start2"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  start3_button
  {
    mesh                                "blkb.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.button_start3"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  emergencystop_button
  {
    mesh                                "blkb.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.button_adrupt_end"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  drivercall_button
  {
    mesh                                "blkb.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.mashinist_call"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  locobrakerelease_button
  {
    mesh                                "redb.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.otpusk"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  sanding_lever
  {
    mesh                                "pedal.im"
    kind                                "pulllever"
    auto-create                         1
    att                                 "a.sand_pedal"
    angles                              0,0.101
    limits                              0,1
    test-collisions                     1
  }
  sanding1axle_button
  {
    mesh                                "blkb.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.sand1"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  shunting_button
  {
    mesh                                "blkb.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.shunting_button"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  epk
  {
    mesh                                "EPK_Key.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.epv"
    angles                              0,-1.57
    notches                             0,1
    notchheight                         1,1
    radius                              0.05
    test-collisions                     1
    mousespeed                          -2
  }
  ukbm_rb
  {
    mesh                                "RB.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.button_vigilance"
    limits                              0,1
    angles                              0,0.01
    mousespeed                          15
  }
  ukbm_sry
  {
    mesh                                "redb.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.Skz"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  ukbm_skb
  {
    mesh                                "RB.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.Skb"
    limits                              0,1
    angles                              0,0.01
    mousespeed                          15
  }
  ukbm_vk
  {
    mesh                                "redb.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.ukbm_vk"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  als_checklights_button
  {
    mesh                                "blkb.im"
    kind                                "pullrope"
    auto-create                         1
    att                                 "a.als_check"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  ukbm_lb_light
  {
    mesh                                "redlt.im"
    att                                 "a.ukbm_lb"
    auto-create                         0
  }
  ukbm_lp_light
  {
    mesh                                "propusklt.im"
    att                                 "a.ukbm_propusk"
    auto-create                         0
  }
  als_0
  {
    mesh                                "a_g.im"
    att                                 "a.0"
    auto-create                         0
  }
  als_1
  {
    mesh                                "a_y.im"
    att                                 "a.1"
    auto-create                         0
  }
  als_2
  {
    mesh                                "a_yr.im"
    att                                 "a.2"
    auto-create                         0
  }
  als_3
  {
    mesh                                "a_r.im"
    att                                 "a.3"
    auto-create                         0
  }
  als_4
  {
    mesh                                "a_w.im"
    att                                 "a.4"
    auto-create                         0
  }
  clock_min
  {
    mesh                                "clock_minutes_needle.im"
    auto-create                         1
    att                                 "a.clock"
    limits                              0,60
    angles                              0,6.283
    kind                                "needle"
  }
  clock_hr
  {
    mesh                                "clock_hour_needle.im"
    auto-create                         1
    att                                 "a.clock"
    limits                              0,24
    angles                              0,6.283
    kind                                "needle"
  }
  lip_powerdrop1_light
  {
    mesh                                "redlt.im"
    att                                 "a.power_drop_1st"
    auto-create                         0
  }
  lip_powerdrop2_light
  {
    mesh                                "redlt.im"
    att                                 "a.power_drop_3rd"
    auto-create                         0
  }
  lip_powerdrop3_light
  {
    mesh                                "redlt.im"
    att                                 "a.power_drop_2nd"
    auto-create                         0
  }
  lip_enginerunning2_light
  {
    mesh                                "grnlt.im"
    att                                 "a.engine_running"
    auto-create                         0
  }
  lip_enginerunning3_light
  {
    mesh                                "grnlt.im"
    att                                 "a.engine_running2"
    auto-create                         0
  }
  lip_braking_light
  {
    mesh                                "whtlt.im"
    att                                 "a.braking"
    auto-create                         0
  }
  lip_brakepipecontrol_light
  {
    mesh                                "redlt.im"
    att                                 "a.brakepipe_control"
    auto-create                         0
  }
  cl_lamphigh_light
  {
    mesh                                "lamp_high.IM"
    att                                 "a.centr"
    auto-create                         0
  }
  cl_lamplow_light
  {
    mesh                                "lamp_low.IM"
    att                                 "a.centr"
    auto-create                         0
  }
  cl_gauges_light
  {
    mesh                                "pribltyar.im"
    att                                 "a.centr"
    auto-create                         0
    test-collisions                     0
  }
  cl_gauges_light_low
  {
    mesh                                "priblttus.im"
    att                                 "a.centr"
    auto-create                         0
    test-collisions                     0
  }
  falscab
  {
    mesh                                "falscab.im"
    att                                 "a.centr"
    auto-create                         1
  }
  rs_podsvet
  {
    mesh                                "RSlt.im"
    att                                 "a.rs_podsvet"
    auto-create                         0
  }
  luch
  {
    mesh                                "luch.IM"
    att                                 "a.luch"
    auto-create                         0
    test-collisions                     0
  }
  wiper_right
  {
    mesh                                "dvor2.im"
    auto-create                         1
    animation-loop-speed                0
    att                                 "a.wipers_right"
    anim                                "dvor2.kin"
  }
  wiper_left
  {
    mesh                                "dvor.im"
    auto-create                         1
    animation-loop-speed                0
    att                                 "a.wipers_left"
    anim                                "dvor.kin"
  }
  wiper_left_lever
  {
    kind                                "lever"
    mesh                                "wiper_lvr.im"
    auto-create                         1
    att                                 "a.wipers_lever_left"
    mousespeed                          0.4
    angles                              0,31.450001
    limits                              0,1
  }
  wiper_right_lever
  {
    kind                                "lever"
    mesh                                "wiper_lvr.im"
    auto-create                         1
    att                                 "a.wipers_lever_right"
    mousespeed                          0.4
    angles                              0,31.450001
    limits                              0,1
  }
  window_l_rain
  {
    mesh                                "window_l_rain.im"
    att                                 "a.centr"
    auto-create                         0
  }
  window_r_rain
  {
    mesh                                "window_r_rain.im"
    att                                 "a.centr"
    auto-create                         0
  }
  window_l_rain_c
  {
    mesh                                "window_l_rain_c.im"
    att                                 "a.centr"
    auto-create                         0
  }
  window_r_rain_c
  {
    mesh                                "window_r_rain_c.im"
    att                                 "a.centr"
    auto-create                         0
  }
  shtorka_r
  {
    kind                                "animated-lever"
    mesh                                "storka_r.im"
    anim                                "storka_r.kin"
    att                                 "a.shtorka1"
    auto-create                         1
    mousespeed                          -0.5
    limits                              0,1
    test-collisions                     1
    mousemode                           "1"
  }
  shtorka_l
  {
    kind                                "animated-lever"
    mesh                                "storka_l.im"
    anim                                "storka_l.kin"
    att                                 "a.shtorka2"
    auto-create                         1
    mousespeed                          -0.5
    limits                              0,1
    test-collisions                     1
    mousemode                           "1"
  }
  okno1
  {
    kind                                "animated-lever"
    mesh                                "okno1.im"
    anim                                "okno1.kin"
    att                                 "a.okno_r"
    auto-create                         1
    mousespeed                          1
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    test-collisions                     1
    mousemode                           "1"
  }
  fort1
  {
    mesh                                "fort1.im"
    auto-create                         1
    kind                                "lever"
    att-parent                          "okno1"
    att                                 "a.fort1"
    angles                              0,-1.57
    notches                             0,1
    notchheight                         0,0
    test-collisions                     1
    mousemode                           "1"
  }
  okno2
  {
    kind                                "animated-lever"
    mesh                                "okno2.im"
    anim                                "okno2.kin"
    att                                 "a.okno_l"
    auto-create                         1
    mousespeed                          1
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    test-collisions                     1
    mousemode                           "1"
  }
  fort2
  {
    mesh                                "fort2.im"
    auto-create                         1
    kind                                "lever"
    att-parent                          "okno2"
    att                                 "a.fort2"
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
    test-collisions                     1
    mousemode                           "1"
  }
  podlok1
  {
    mesh                                "podlok1.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.podlok1"
    angles                              0,4.712
    notches                             0,0.33,0.659,1
    notchheight                         0,0,0,0
    limits                              0,1
    test-collisions                     1
    mousemode                           "1"
  }
  podlok2
  {
    mesh                                "podlok2.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.podlok2"
    angles                              0,-4.712
    notches                             0,0.33,0.659,1
    notchheight                         0,0,0,0
    limits                              0,1
    test-collisions                     1
    mousemode                           "1"
  }
  oknorain_r
  {
    mesh                                "oknorain_r.im"
    att-parent                          "okno1"
    auto-create                         0
    att                                 "a.fort1"
  }
  oknorain_l
  {
    mesh                                "oknorain_l.im"
    att-parent                          "okno2"
    auto-create                         0
    att                                 "a.fort2"
  }
  fortrain_r
  {
    mesh                                "fortrain_r.im"
    att-parent                          "fort1"
    auto-create                         0
    att                                 "a.fortr"
  }
  fortrain_l
  {
    mesh                                "fortrain_l.im"
    att-parent                          "fort2"
    auto-create                         0
    att                                 "a.fortl"
  }
  oknorain_rw
  {
    mesh                                "oknorain_r.im"
    att-parent                          "okno1"
    auto-create                         0
    att                                 "a.fort1"
  }
  oknorain_lw
  {
    mesh                                "oknorain_l.im"
    att-parent                          "okno2"
    auto-create                         0
    att                                 "a.fort2"
  }
  fortrain_rw
  {
    mesh                                "fortrain_r.im"
    att-parent                          "fort1"
    auto-create                         0
    att                                 "a.fortr"
  }
  fortrain_lw
  {
    mesh                                "fortrain_l.im"
    att-parent                          "fort2"
    auto-create                         0
    att                                 "a.fortl"
  }
  pomoha
  {
    auto-create                         1
    mesh                                "pomoha.im"
    anim                                "pomoha.kin"
    animation-loop-speed                1
    att                                 "a.pomoha"
  }
  cab_black
  {
    auto-create                         1
    mesh                                "2te10cab_black2.im"
    animation-loop-speed                1
    att                                 "a.cab_black"
    att-parent                          "default"
  }
  diesel_room
  {
    mesh                                "mesh/diesel_room/diesel_room.im"
    att                                 "a.diesel"
    auto-create                         1
    mesh-asset                          <kuid:914307:141000>
    test-collisions                     0
  }
}
thumbnails
{
  0
  {
    image                               "2te10m_art/$screenshot$.jpg"
    width                               240
    height                              180
  }
}
string-table
{
  kran_394                              "Кран машиниста"
  kran_1                                "I отпуск"
  kran_2                                "II поездное"
  kran_3                                "III перекрыша без питания"
  kran_4                                "IV перекрыша с питанием"
  kran_5a                               "VA служебное медленным темпом"
  kran_5                                "V служебное"
  kran_6                                "VI экстренное"
  kran_254                              "Тормоз локомотива"
  lb-release                            "буфер"
  lb-0                                  "поездное"
  thr-base                              "Контроллер"
  dl-name                               "БФ"
  dl-fr                                 "передний правый"
  dl-fl                                 "передний левый"
  dl-br                                 "задний правый"
  dl-bl                                 "задний левый"
  dl-red                                "красный"
  dl-white                              "белый"
  dl-off                                "выкл."
  space                                 ""
  revers                                "Реверсор"
  txt-add_brake                         "Вспомогательный тормоз"
  bloc                                  "Блокировка Тормозов"
  tifon                                 "свисток/тифон"
  txt-cabin_light                       "Освещение кабины ярко/тускло"
  txt-control_lights                    "Освещение пульта ярко/тускло"
  pr_yarko                              "Прожектор ярко"
  prog_tusklo                           "Прожектор тускло"
  txt-buf_fl                            "Левый передний БФ"
  txt-buf_fr                            "Правый передний БФ"
  txt-buf_rl                            "Левый задний БФ"
  txt-buf_rr                            "Правый задний БФ"
  txt-cooler_control                    "Управление холодильником"
  txt-oil_shutters                      "Жалюзи масла и верхние"
  txt-top_shutters                      "Жалюзи верхние"
  txt-water_shutters                    "Жалюзи воды и верхние"
  txt-cooler_fan                        "Вентилятор холодильника"
  txt-fault_check                       "Указатель повреждений"
  txt-fire_alert                        "Пожарная сигнализация"
  txt-oil_pressure                      "Давление масла"
  txt-idle_2                            "Холостой ход | секция 1"
  txt-idle_3                            "Холостой ход | секция 2"
  txt-op_control                        "Управление переходом"
  txt-alsn_filter                       "Фильтр АЛСН"
  txt-fuel_pump_1                       "Топливный насос | секция 1"
  txt-fuel_pump_2                       "Топливный насос | секция 2"
  txt-fuel_pump_3                       "Топливный насос | секция 3"
  txt-loco_control                      "Управление тепловозом"
  txt-vigilance                         "Бдительность"
  txt-radio                             "Радиостанция"
  txt-fuel_pump                         "Топливный насос"
  txt-diesel_run                        "Работа дизеля"
  txt-shutters                          "Жалюзи"
  txt-signal_lights                     "Светосигнальные приборы"
  txt-body_fan                          "Вентилятор кузова"
  txt-batt_minus                        "Общий минус"
  txt-batt_plus                         "Общий плюс"
  txt-control_switch                    "Автомат управления"
  txt-heater                            "Калорифер"
  txt-start_1                           "Запуск | секция 1"
  txt-start_2                           "Запуск | секция 2"
  txt-start_3                           "Запуск | секция 3"
  txt-emergency_shutdown                "Аварийная остановка"
  txt-driver_call                       "Вызов машиниста"
  txt_brake_release                     "Отпуск"
  txt-sand_pedal                        "Песок"
  txt-sand_1_wheel                      "Подача песка под первую ось"
  txt-run_to_signal                     "Подтяг"
  txt-epk_key                           "Ключ ЭПК"
  txt-ukbm_rb                           "УКБМ | РБ"
  txt-ukbm_skzh                         "УКБМ | Sкж"
  txt-ukbm_skb                          "УКБМ | Sкб"
  txt-ukbm_vk                           "УКБМ | ВК"
  txt-alsn_check                        "Проверка АЛСН"
  txt-left_viper                        "Левый дворник"
  txt-right_viper                       "Правый дворник"
}
kuid                                    <kuid2:914307:100142:3>
kuid-table
{
  sl                                    <kuid:914307:141000>
  lsf-core-library                      <kuid:151055:60067>
  radio                                 <kuid:293946:100123>
  sound-library                         <kuid:914307:100098>
  controlset                            <kuid2:151055:60033:2>
}
Файлы:
2te10m_art
2te10m_art / $screenshot$.jpg	2.3 MB
sound
sound / 394-v_start.wav	30.8 kB
sound / cabin.txt	126 B
sound / 394-va_start.wav	20.6 kB
sound / 394-va_loop.wav	39.4 kB
sound / 394-v_stop.wav	48.0 kB
sound / epv-whistle_start.wav	29.1 kB
sound / epv-whistle_stop.wav	30.1 kB
sound / epv-whistle_loop.wav	40.2 kB
sound / 394-v_loop.wav	194.5 kB
sound / wind_on.wav	23.1 kB
sound / wind_off.wav	20.7 kB
sound / stab_klap.wav	59.6 kB
sound / time.wav	199.5 kB
sound / sl2m.wav	294.3 kB
254.texture.txt	26 B
394_1.texture.txt	28 B
2te10cab_black2.im	42.9 kB
394_2.texture.txt	28 B
2te10cab.kin	35.4 kB
a_g.im	6.1 kB
a_r.im	6.1 kB
394_2.jpg	130.1 kB
a_w.im	6.1 kB
a_y.im	6.1 kB
254.jpg	213.6 kB
a_yr.im	6.1 kB
394_1.jpg	254.8 kB
alsn.texture.txt	27 B
black_needle.im	3.6 kB
blkb.im	3.7 kB
brake_block_lever.im	7.7 kB
brakecylinder_needle.im	6.7 kB
casual02_m_25.texture.txt	36 B
clock_hour_needle.im	1.8 kB
clock_hour_needle.kin	1.9 kB
clock_minutes_needle.kin	4.4 kB
clock_minutes_needle.im	2.4 kB
detals.texture.txt	29 B
alsn.jpg	171.5 kB
detals2.texture.txt	30 B
dvor.im	12.1 kB
dvor.kin	3.0 kB
dvor2.im	12.1 kB
dvor2.kin	3.0 kB
elect_needle.im	1.8 kB
elect_needle2.im	1.8 kB
elect_needle3.im	1.8 kB
epk_key.im	15.4 kB
epv-whistle_loop.wav	40.2 kB
epv-whistle_start.wav	29.1 kB
epv-whistle_stop.wav	30.1 kB
falscab.im	42.3 kB
fort1.im	8.9 kB
fort2.im	8.9 kB
fortrain_l.im	2.0 kB
fortrain_r.im	2.0 kB
detals.jpg	2.0 MB
glrain1-glrain1.texture.txt	49 B
glrain2-glrain2.texture.txt	49 B
grnlt.im	1.7 kB
horn.im	35.9 kB
2te10cab.im	2.5 MB
illum-illum.texture.txt	45 B
casual02_m_25.jpg	2.2 MB
korpus.texture.txt	29 B
glrain1.tga	2.0 MB
detals2.jpg	3.1 MB
korpus2.texture.txt	30 B
kresla.texture.txt	29 B
lamp_high.im	4.9 kB
lamp_low.im	4.9 kB
light_sword-light_sword.texture.txt	57 B
kresla.jpg	430.2 kB
luch.im	3.0 kB
maslo2_str.im	698 B
maslo2_str.kin	1.1 kB
maslo_str.im	698 B
maslo_str.kin	1.1 kB
light_sword.tga	128.0 kB
melkota.jpg	258.4 kB
melkota.texture.txt	30 B
mirror2-mirror2.texture.txt	49 B
mirror2_n-mirror2_n.texture.txt	99 B
glrain2.tga	2.0 MB
okno1.kin	1.0 kB
okno1.im	21.5 kB
mirror2.tga	128.0 kB
okno2.kin	1.0 kB
oknorain_l.im	564 B
oknorain_r.im	564 B
okno2.im	21.5 kB
panel_2.texture.txt	30 B
mirror2_n.tga	128.0 kB
pedal.im	3.5 kB
podlok1.im	5.4 kB
podlok2.im	5.4 kB
pomoha.im	183.2 kB
priblttus.im	34.4 kB
pribltyar.im	34.3 kB
panel_2.jpg	397.5 kB
pribory2.texture.txt	31 B
propusklt.im	2.0 kB
korpus.jpg	3.9 MB
pult.texture.txt	27 B
racia.jpg	205.9 kB
racia.texture.txt	28 B
radio_lever.im	5.0 kB
rb.im	8.8 kB
pribory2.jpg	874.5 kB
redb.im	3.7 kB
red_needle.im	3.4 kB
redlt.im	1.7 kB
reverser_lever.im	12.0 kB
pomoha.kin	836.7 kB
reyki.texture.txt	28 B
pult.jpg	883.2 kB
smtum.im	2.3 kB
reyki.jpg	233.8 kB
rslt.im	103.1 kB
speedo_needle.im	2.0 kB
stol.texture.txt	27 B
storka_l.im	6.6 kB
storka_l.kin	2.8 kB
storka_r.im	6.6 kB
str.im	712 B
storka_r.kin	2.8 kB
strelki.texture.txt	30 B
t_needle.im	670 B
t_needle.kin	1.0 kB
strelki.jpg	58.7 kB
tablichky.texture.txt	32 B
trainbrake.im	20.5 kB
throttle_ring.im	54.7 kB
tumb.im	5.7 kB
trainbrake2.im	25.4 kB
united_krany.texture.txt	35 B
whtlt.im	1.7 kB
tablichky.jpg	1.0 MB
window-window.texture.txt	47 B
illum.tga	4.0 MB
window_l_rain.im	792 B
window_l_rain_c.im	1.0 kB
window_r_rain.im	792 B
window_r_rain_c.im	1.0 kB
wiper_lvr.im	1.2 kB
xt10m_new_interior.gs	92 B
united_krany.jpg	1.8 MB
illum_1.tga	4.0 MB
korpus2.jpg	3.3 MB
stol.jpg	2.0 MB
window.tga	4.0 MB
Общий объём файлов:	47.2 MB
Версии элемента:
kuid	kind	name	build	date	size
<kuid2:914307:100142:3>	interior	Кабина 2ТЭ10 на 8 позиций-зеленая	4.6	12.05.2025 16:25:40	34.0 MB
<kuid2:914307:100142:2>	interior	Кабина 2ТЭ10 на 8 позиций-зеленая	4.6	23.04.2023 5:09:19	34.0 MB
<kuid2:914307:100142:1>	interior	Кабина 2ТЭ10 на 8 позиций-зеленая	4.6	8.05.2023 13:34:09	33.1 MB
<kuid:914307:100142>	interior	Кабина 2ТЭ10 на 8 позиций-зеленая	3.7	20.10.2023 22:07:29	32.8 MB
Зависимости:
kuid	author	kind	name	build	date	size
<kuid2:151055:60033:2>	Эрендир	controlset	Клавиатура для дизельных локомотивов	3.7	7.01.2018 16:41:22	44.2 kB
<kuid2:151055:60067:1>	Эрендир	library	Locomotive Script Framework	5.4	25.09.2025 0:20:43	2.7 MB
<kuid2:293946:100123:2>	#293946	hornsound	DSP Radio sounds	2.9	28.02.2021 23:01:23	5.2 kB
<kuid:914307:100098>	#914307	enginesound	Sound Library	4.6	23.04.2023 5:09:19	27.8 MB
<kuid:914307:141000>	#914307	library	Библиотека ассетов от xТЭ10	4.6	12.05.2025 16:25:59	19.8 MB
Всего связей: 5, неизвестных связей: 0
Зависимые элементы:
kuid	author	kind	name	build	date	size
<kuid:540911:100249>	#540911	traincar	TRS19_2ТЭ10М-3370 А	4.6	4.02.2023 14:53:28	33.2 MB
<kuid:540911:100251>	#540911	traincar	TRS19_2ТЭ10М-3370 Б	4.6	3.02.2023 22:36:36	33.2 MB
<kuid2:914307:130000:3>	#914307	traincar	TRS19_2ТЭ10М-2255 А	3.7	17.05.2023 18:35:48	7.2 MB
<kuid2:914307:130000:4>	#914307	traincar	TRS19_2ТЭ10М-2255 А	3.7	13.12.2020 10:22:03	7.2 MB
<kuid2:914307:130000:5>	#914307	traincar	TRS19_2ТЭ10М-2255 А	4.6	19.04.2023 13:04:52	30.5 MB
<kuid2:914307:130000:6>	#914307	traincar	TRS19_2ТЭ10М-2255 А	4.6	12.05.2025 16:27:30	31.3 MB
<kuid2:914307:140000:3>	#914307	traincar	TRS19_2ТЭ10М-2255 Б	3.7	20.05.2023 9:51:11	6.9 MB
<kuid2:914307:140000:4>	#914307	traincar	TRS19_2ТЭ10М-2255 Б	3.7	13.12.2020 10:22:03	6.9 MB
<kuid2:914307:140000:5>	#914307	traincar	TRS19_2ТЭ10М-2255 Б	4.6	19.04.2023 13:04:52	30.3 MB
<kuid2:914307:140000:6>	#914307	traincar	TRS19_2ТЭ10М-2255 Б	4.6	12.05.2025 16:29:15	31.1 MB