<kuid:876688:100209> SAR P117 BG Locomotive (WEATHERED) TS12 SP1+

Тип: traincar
Опубликовано: 11.09.2023 0:01:25
Скачиваний: 22
Размер: 10.4 MB

Скачать

South Australian Railways P class 2-4-0 Tank Engine. The locomotives in this class were built Beyer Peacock (1884) and James Martin & Co of Gawler (1893). This locomotive was one of the later batch, built by James Martin & Co. This class was based on a similar 2-4-0 which ran on the Isle of Wight railway in the United Kingdom. The class was originally built to haul suburban trains, replaced the small tank engines running on the Glenelg line (now a tramway) when the SAR purchased that operation in 1899, running on that line until 1929. The class served the rest of their working life as shunters at depots like Mile End and Tailem Bend as well as hauling shuttle goods on the Pelican Point line, as well as the occasional commuter working until replaced by the 350 and 500 class shunting diesels. All were out of service by 1960, and only one (117) was saved from scrap by the then new Mile End Railway Museum. This locomotive, number 117 is an example of the later batch built by James Martin & Co. The engine was built in 1893, and was the first engine the Mile End Railway Museum (now known as the National Railway Museum) saved from scrap in 1963. It has been on static display since. This Trainz model depicts the locomotive in a faded and weathered livery, like it would have had in service with the South Australian Railways. Special Thanks to Gabby Sexton, curator of the National Railway Museum for photographs and information, as well as http://www.australiansteam.com/P117.htm and https://en.wikipedia.org/wiki/South_Australian_Railways_P_class. This model is made for broad gauge since that is what the prototype ran on. Future SAR content will most likely be made in broad gauge so this locomotive would be compatible with that.

config.txt:

username                                "SAR P117 BG Locomotive (WEATHERED) TS12 SP1+"
author                                  "vt29"
organisation                            "VT29's Trainz Content"
contact-website                         "https://www.youtube.com/c/VT29steamtrain"
license                                 "Permission granted and encouraged to reskin, re-kuid and include this in routes and sessions so long as you do not profit off this locomotive. You are only allowed to upload this to the Auran (N3V) DLS, so long as you credit me in the config. If this model gives you errors, a virus or not fuctioning correctly, I am not liable, since it works fine for me. Copyright VT29steamtrain MMXXI"
description                             "South Australian Railways P class 2-4-0 Tank Engine. The locomotives in this class were built Beyer Peacock (1884) and James Martin & Co of Gawler (1893). This locomotive was one of the later batch, built by James Martin & Co. This class was based on a similar 2-4-0 which ran on the Isle of Wight railway in the United Kingdom. The class was originally built to haul suburban trains, replaced the small tank engines running on the Glenelg line (now a tramway) when the SAR purchased that operation in 1899, running on that line until 1929. The class served the rest of their working life as shunters at depots like Mile End and Tailem Bend as well as hauling shuttle goods on the Pelican Point line, as well as the occasional commuter working until replaced by the 350 and 500 class shunting diesels. All were out of service by 1960, and only one (117) was saved from scrap by the then new Mile End Railway Museum. This locomotive, number 117 is an example of the later batch built by James Martin & Co. The engine was built in 1893, and was the first engine the Mile End Railway Museum (now known as the National Railway Museum) saved from scrap in 1963. It has been on static display since. This Trainz model depicts the locomotive in a faded and weathered livery, like it would have had in service with the South Australian Railways. Special Thanks to Gabby Sexton, curator of the National Railway Museum for photographs and information, as well as http://www.australiansteam.com/P117.htm and https://en.wikipedia.org/wiki/South_Australian_Railways_P_class. This model is made for broad gauge since that is what the prototype ran on. Future SAR content will most likely be made in broad gauge so this locomotive would be compatible with that."
trainz-build                            3.5
category-class                          "AT"
category-region                         "AU"
category-era                            "1880s;1890s;1900s;1910s;1920s;1930s;1940s;1950s"
kind                                    "traincar"
engine                                  1
enginespec                              <kuid:248163:1084>
interior                                <kuid2:44090:55014:6>
enginesound                             <kuid2:126323:53052:2>
hornsound                               <kuid:876688:100029>
real-engine                             1
smoke_shade                             0.3
smoke_random                            2
smoke_slowlife                          1
smoke_fastlife                          6
smoke_height                            0
smoke_fastspeed                         2
light_color                             255,247,237
mass                                    34200
mesh-table
{
  default
  {
    mesh                                "body/body.lm"
    auto-create                         1
  }
  shadow
  {
    mesh                                "shadow/shadow.im"
    auto-create                         0
  }
}
bogeys
{
  0
  {
    reversed                            0
    bogey                               <kuid:-10:149>
  }
  1
  {
    reversed                            0
    bogey                               <kuid:876688:100301>
  }
  2
  {
    reversed                            0
    bogey                               <kuid:-10:149>
  }
}
thumbnails
{
  0
  {
    image                               "art/thumbnail.jpg"
    width                               240
    height                              180
  }
}
queues
{
  load-coal
  {
    size                                1525
    initial-count                       1525
    product-kuid                        <kuid2:44179:60013:4>
  }
  load-water
  {
    size                                2725
    initial-count                       2725
    product-kuid                        <kuid:-3:10004>
  }
}
smoke0
{
  attachment                            "a.smoke0"
  mode                                  "speed"
  color                                 193,193,193,153
  accel                                 0,0,-0.3
  start                                 0,6,12,16
  rate                                  12,18,24,36
  velocity                              2
  lifetime                              8
  minsize                               0.4
  maxsize                               3,4,6,8
}
smoke1
{
  attachment                            "a.whistle"
  mode                                  "speed"
  file                                  "smoke/whistle.tfx"
  color                                 255,255,255,255
}
smoke2
{
  attachment                            "a.safety0"
  mode                                  "lowpressurevalve"
  enabled                               1
  scale                                 100
  file                                  "smoke/steam.tfx"
  color                                 255,255,255,255
}
smoke3
{
  attachment                            "a.safety1"
  mode                                  "highpressurevalve"
  enabled                               1
  scale                                 100
  file                                  "smoke/steam.tfx"
  color                                 255,255,255,255
}
smoke4
{
  attachment                            "a.cylcock0"
  mode                                  "speed"
  color                                 255,255,255,255
  start                                 0,0.1,2
  rate                                  0,15,0
  velocity                              6
  lifetime                              1
  minsize                               0.2
  maxsize                               1.5
  accel                                 0.1,0.1,0.25
}
smoke5
{
  attachment                            "a.cylcock1"
  mode                                  "speed"
  color                                 255,255,255,255
  start                                 0,0.1,2
  rate                                  0,15,0
  velocity                              6
  lifetime                              1
  minsize                               0.2
  maxsize                               1.5
  accel                                 0.1,0.1,0.25
}
soundscript
{
  dayloop1
  {
    repeat-delay                        0,0
    distance                            1,30
    volume                              300
    priority                            1
    sound
    {
      0                                 "sound/single_air_pump.wav"
    }
  }
}
kuid                                    <kuid:876688:100209>
kuid-table
{
  0                                     <kuid:-3:10004>
  1                                     <kuid:248163:1084>
  2                                     <kuid2:44090:55014:6>
  3                                     <kuid2:126323:53052:2>
  4                                     <kuid:876688:100029>
  5                                     <kuid:-10:149>
  6                                     <kuid2:44179:60013:4>
  7                                     <kuid:876688:100301>
}

Файлы:

art
art / thumbnail.jpg	16.8 kB
body
body / blackbake.texture.txt	32 B
body / body.lm.txt	335 B
body / brakehoses.texture.txt	33 B
body / coalbake.texture.txt	31 B
body / env_metal.texture.txt	32 B
body / env_metal_brass.texture.txt	38 B
body / goldbake.texture.txt	31 B
body / greenbake.texture.txt	32 B
body / env_metal.jpg	3.6 kB
body / greybake.texture.txt	31 B
body / env_metal_brass.jpg	3.9 kB
body / lightsbake.texture.txt	33 B
body / rearbake.texture.txt	31 B
body / redbake.texture.txt	30 B
body / tanksbake.texture.txt	32 B
body / woodbake.texture.txt	31 B
body / body_lod4.im	39.4 kB
body / body_lod3.im	1.3 MB
body / body_lod2.im	2.6 MB
body / body_lod1.im	3.7 MB
body / rearbake.tga	4.0 MB
body / woodbake.tga	4.0 MB
body / greenbake.tga	4.0 MB
body / body_lod0.im	4.6 MB
body / coalbake.tga	4.0 MB
body / goldbake.tga	4.0 MB
body / tanksbake.tga	4.0 MB
body / brakehoses.tga	4.0 MB
body / redbake.tga	4.0 MB
body / greybake.tga	4.0 MB
body / lightsbake.tga	4.0 MB
body / blackbake.tga	4.0 MB
shadow
shadow / shadow.im	20.1 kB
smoke
smoke / steam.tfx	420 B
smoke / whistle.tfx	404 B
sound
sound / single_air_pump.wav	547.9 kB
Общий объём файлов:	56.8 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:876688:100209>	traincar	SAR P117 BG Locomotive (WEATHERED) TS12 SP1+	3.5	11.09.2023 0:01:25	10.4 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-10:149>	#-10	bogey	Тележка_невидимая	0	18.04.2023 0:03:42	1.4 kB
<kuid:-3:10004>	#-3	product	Вода	0	20.10.2022 23:31:06	5.6 kB
<kuid2:44090:55014:6>	#44090	interior	Terrier BR Cab	2.4	13.06.2020 19:05:23	3.1 MB
<kuid2:44179:60013:4>	#44179	product	Уголь	3.7	30.10.2020 22:44:39	1.5 MB
<kuid2:126323:53052:2>	#126323	enginesound	Steam Engine Sound - 2 cylinder Stephenson	2.8	23.12.2022 4:11:24	2.0 MB
<kuid2:248163:1084:15>	#248163	steam-engine	GWR 1400/4800/5800 Class Enginespec TRS19+	4.8	11.05.2023 14:54:10	55.4 kB
<kuid:876688:100029>	#876688	hornsound	SAR single chime (P, F and T class whistle)	3.5	11.09.2023 0:01:25	465.9 kB
<kuid:876688:100301>	#876688	bogey	SAR P117 Bogie BG	3.5	11.09.2023 0:01:26	1.2 MB
Всего связей: 8, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет