<kuid:833171:101328> Interior ER2 [bot]

Тип: Кабина
Опубликовано: 8.06.2024 12:22:13
Скачиваний: 78
Размер: 5.4 MB
Автор: Ilyon
Скачать

config.txt:
username                                "Interior ER2 [bot]"
kind                                    "interior"
cameradefault                           0
category-class                          "ZI"
category-region                         "RU"
author                                  "ER2-1050/CergeyK; Фотоматериал: Борис Космин/Боинг; Перекраска: Ярослав Рижский/Rizhskiy7083; Редактирование и скрипт: 
levik70"
category-era                            "1980s;1990s;2000s"
trainz-build                            3.7
interior-controls-type                  "full"
cameralist
{
  camera0                               0.833,-9.682,3.111,-12.596,-0.281
  camera1                               0.217,-10.463,2.515,-12.52,-1.252
  camera2                               -0.695,-9.924,2.808,-12.55,-0.178
  camera3                               -0.695,-9.924,2.911,-12.55,-0.178
  camera4                               -1.211,-9.959,2.793,-15.494,-0.067
  camera5                               -1.112,-9.938,2.288,-15.633,-0.463
  camera6                               -0.939,-9.877,1.795,-12.927,-0.309
}
mesh-table
{
  default
  {
    mesh                                "cab.im"
    auto-create                         1
  }
  km1
  {
    mesh                                "throttle.IM"
    kind                                "lever"
    att                                 "a.throtte"
    auto-create                         1
    att-parent                          "default"
    limits                              0,1
    angles                              -0.87,2.27
    notches                             0,0.15,0.3,0.45,0.6,0.75,0.9,1
    notchheight                         3,3,3,3,3,3,3,3
    radius                              0.04
    mousespeed                          -0.2
  }
  kran395
  {
    mesh                                "395.IM"
    att                                 "a.mainbrake"
    auto-create                         1
    kind                                "lever"
    limits                              0,100
    angles                              -0.78,-2.85
    notches                             0,0.27,0.42,0.49,0.56,0.71,1
    notchheight                         1,1,1,1,1,1,1
    radius                              0.15
    att-parent                          "default"
    mousespeed                          -0.2
  }
  reverser1
  {
    kind                                "lever"
    mesh                                "revers.im"
    auto-create                         1
    att                                 "a.revers"
    limits                              0,1
    angles                              -1.25,0
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.14
  }
  pedal_m
  {
    kind                                "pulllever"
    mesh                                "pedal.im"
    att                                 "a.pedal_m"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,-0.28
    notches                             0,0.5,1
    notchheight                         0,0,0
  }
  pedal_p
  {
    kind                                "pulllever"
    mesh                                "pedal.im"
    att                                 "a.pedal_p"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,-0.28
    notches                             0,0.5,1
    notchheight                         0,0,0
  }
  epk_key
  {
    kind                                "lever"
    mesh                                "epk_key.IM"
    att                                 "a.epk"
    auto-create                         1
    mousespeed                          5
    radius                              0.05
    limits                              0,1
    angles                              0,-1.57
    notches                             0,1
    notchheight                         0,0
  }
  nm
  {
    kind                                "lever"
    mesh                                "kr.im"
    att                                 "a.nm"
    auto-create                         1
    mousespeed                          3
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  tm
  {
    kind                                "lever"
    mesh                                "kr.im"
    att                                 "a.tm"
    auto-create                         1
    mousespeed                          3
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  epk_kr
  {
    kind                                "lever"
    mesh                                "kr.im"
    att                                 "a.epk_kr"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  stopkran
  {
    kind                                "lever"
    mesh                                "stopkran.im"
    att                                 "a.stopkran"
    auto-create                         1
    mousespeed                          -1
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  wipers
  {
    kind                                "lever"
    mesh                                "perekl_proj.im"
    att                                 "a.perekl_obogrev"
    auto-create                         1
    mousespeed                          -1
    radius                              0.05
    limits                              0,1
    angles                              1.9,0.1
    notches                             0,0.35,0.67,1
    notchheight                         0,0,0,0
  }
  pribors_er2
  {
    mesh                                "pribors_er2.im"
    auto-create                         1
    att                                 "a.cab_p_null"
    att-parent                          "default"
  }
  l_wiper
  {
    mesh                                "r_dvor.im"
    auto-create                         1
    att                                 "a.l_wip"
  }
  r_wiper
  {
    mesh                                "r_dvor.im"
    auto-create                         1
    att                                 "a.r_wip"
  }
  perekl_ppt
  {
    kind                                "lever"
    mesh                                "perekl.im"
    att                                 "a.perekl_tormoznoj"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              -3.14,-1.57
    notches                             0,0.5,1
    notchheight                         0,0,0
  }
  perekl_lamp
  {
    kind                                "lever"
    mesh                                "perekl.im"
    att                                 "a.perekl_lamp"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  perekl_stobogr
  {
    kind                                "lever"
    mesh                                "perekl2.im"
    att                                 "a.dop_obogrev"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,0.35,0.67,1
    notchheight                         0,0,0,0
  }
  perekl_proj
  {
    kind                                "lever"
    mesh                                "perekl_proj.im"
    att                                 "a.perekl_proj"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,0.5,1
    notchheight                         0,0,0
  }
  maslootd
  {
    kind                                "lever"
    mesh                                "perekl2.im"
    att                                 "a.maslootd"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  pitanie
  {
    kind                                "lever"
    mesh                                "perekl2.im"
    att                                 "a.pitanie"
    auto-create                         1
    mousespeed                          2
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  rb1
  {
    kind                                "pullrope"
    mesh                                "rb.im"
    att                                 "a.rb1"
    auto-create                         1
    mousespeed                          50
    radius                              0.1
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         0,0
  }
  rb2
  {
    kind                                "pullrope"
    mesh                                "rb.im"
    att                                 "a.rb2"
    auto-create                         1
    mousespeed                          50
    radius                              0.1
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         0,0
  }
  sw
  {
    kind                                "pullrope"
    mesh                                "knopka_black.im"
    att                                 "a.zvon02"
    auto-create                         1
    mousespeed                          50
    radius                              0.1
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
  }
  inform
  {
    kind                                "pullrope"
    mesh                                "button.im"
    att                                 "a.zvon05"
    auto-create                         1
    mousespeed                          70
    radius                              0.1
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
  }
  prg_inf
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.br"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,-0.5
    notches                             0,1
    notchheight                         0,0
  }
  prg_inf2
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.br2"
    auto-create                         1
    mousespeed                          5
    radius                              0.05
    limits                              0,1
    angles                              0,-0.5
    notches                             0,1
    notchheight                         0,0
  }
  rb_1
  {
    kind                                "pullrope"
    mesh                                "knopka_krug.im"
    att                                 "a.zvon03"
    auto-create                         1
    mousespeed                          50
    radius                              0.1
    limits                              0,1
    angles                              0,-0.004
    notches                             0,1
    notchheight                         0,0
  }
  tiff
  {
    kind                                "pullrope"
    mesh                                "knopka_red.im"
    att                                 "a.zvon01"
    auto-create                         1
    mousespeed                          70
    radius                              0.1
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
  }
  zvonok
  {
    kind                                "pullrope"
    mesh                                "knopka_red.im"
    att                                 "a.zvon"
    auto-create                         1
    mousespeed                          50
    radius                              0.1
    limits                              0,1
    angles                              0,-0.0015
    notches                             0,1
    notchheight                         0,0
  }
  knopka_bk
  {
    kind                                "pullrope"
    mesh                                "knopka_red.im"
    att                                 "a.knopka_BK"
    auto-create                         1
    mousespeed                          50
    radius                              0.1
    limits                              0,1
    angles                              0,-0.0015
    notches                             0,1
    notchheight                         0,0
  }
  pon_uskor
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.unused"
    auto-create                         1
    mousespeed                          5
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  r_pusk
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.avar_ept"
    auto-create                         1
    mousespeed                          5
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  dveri_mash_lev
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.dveri_mash_lev"
    auto-create                         1
    mousespeed                          2
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  dveri_mash_prav
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.dveri_mash_prav"
    auto-create                         1
    mousespeed                          2
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  dveri_pom_lev
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.dveri_pom_lev"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  dveri_pom_prav
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.dveri_pom_prav"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  osv_cab_low
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.osv_cab_low"
    auto-create                         1
    mousespeed                          4
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  osv_cab_norm
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.osv_cab_norm"
    auto-create                         1
    mousespeed                          5
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  vozvrat
  {
    kind                                "pulllever"
    mesh                                "perekl1.im"
    att                                 "a.vozvrat"
    auto-create                         1
    mousespeed                          5
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0
    notchheight                         0
  }
  pant_up
  {
    kind                                "pulllever"
    mesh                                "perekl1.im"
    att                                 "a.pant_up"
    auto-create                         1
    mousespeed                          3
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0
    notchheight                         0
  }
  pant_down
  {
    kind                                "pulllever"
    mesh                                "perekl1.im"
    att                                 "a.pant_down"
    auto-create                         1
    mousespeed                          3
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0
    notchheight                         0
  }
  torm_comb
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.torm_comb"
    auto-create                         1
    mousespeed                          3
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  pesok
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.pesok"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  osv_pult_low
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.osv_pult_low"
    auto-create                         1
    mousespeed                          2
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  osv_pult_norm
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.osv_pult_norm"
    auto-create                         1
    mousespeed                          2
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  unused
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.torm_electr"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  unused2
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.otpusk"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  vu
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.bkr_u"
    auto-create                         1
    mousespeed                          3
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  stekloobogrev_bok
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.stekloobogrev"
    auto-create                         1
    mousespeed                          3
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  stekloobogrev
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.stekloobogrev1"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  left_door_otkr
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.left_door_otkr"
    auto-create                         1
    mousespeed                          2
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  right_door_otkr
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.right_door_otkr"
    auto-create                         1
    mousespeed                          2
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  otopl_usil
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.otopl_usil"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  otopl_norm
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.otopl_norm"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  compressor_vspom
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.compressor_vspom"
    auto-create                         1
    mousespeed                          5
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilacia
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.ventilacia"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  unused3
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.unused2"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  vent_cab1
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.vent_cab1"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  zel_svet
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.zel_svet"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  marsh_fonar
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.marsh_fonar"
    auto-create                         1
    mousespeed                          5
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  sign_verh
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.sign_verh"
    auto-create                         1
    mousespeed                          5
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  sign_niz
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.sign_niz"
    auto-create                         1
    mousespeed                          5
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  blk1
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.b1"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  buf_right
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.buf_right"
    auto-create                         1
    mousespeed                          5
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  buf_left
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.buf_left"
    auto-create                         1
    mousespeed                          5
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  otkl
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.b"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  osv1
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.osv1"
    auto-create                         1
    mousespeed                          5
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  osv_deg
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.osv_deg"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  radio
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.radio"
    auto-create                         1
    mousespeed                          4
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  ept_on_off
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.ept_on_off"
    auto-create                         1
    mousespeed                          3
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  ku_nu
  {
    kind                                "lever"
    mesh                                "dz.im"
    att                                 "a.dz"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  kv_set
  {
    mesh                                "kw_er2.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.voltmeter2"
    angles                              0,4
    limits                              0,4000
    att-parent                          "default"
  }
  gr_needle
  {
    mesh                                "red_arrow.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_nm"
    angles                              0,4.71231
    limits                              0,16
    att-parent                          "default"
  }
  tc_needle
  {
    mesh                                "black_arrow_1.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.kw"
    angles                              0,7.81231
    limits                              0,1600
    att-parent                          "default"
  }
  tm_needle
  {
    mesh                                "black_arrow_2.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_nm"
    angles                              0,4.71231
    limits                              0,1600
    att-parent                          "default"
  }
  ur_equaliser
  {
    kind                                "needle"
    mesh                                "black_arrow_1.im"
    auto-create                         1
    angles                              0,7.41231
    att                                 "a.tc_ur"
    limits                              0,1600
  }
  voltmeter_als
  {
    mesh                                "strelka_voltmeter.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.voltmeter1"
    limits                              0,150
    angles                              0,1.57
    att-parent                          "default"
  }
  knp01
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe11"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0025
    notches                             0,1
    notchheight                         0,0
  }
  knp02
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe12"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.002
    notches                             0,1
    notchheight                         0,0
  }
  knp03
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe13"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.002
    notches                             0,1
    notchheight                         0,0
  }
  knp04
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe14"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0018
    notches                             0,1
    notchheight                         0,0
  }
  knp05
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe15"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0019
    notches                             0,1
    notchheight                         0,0
  }
  knp06
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe16"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0023
    notches                             0,1
    notchheight                         0,0
  }
  knp07
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe17"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0017
    notches                             0,1
    notchheight                         0,0
  }
  knp08
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe18"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0017
    notches                             0,1
    notchheight                         0,0
  }
  knp09
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe19"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0018
    notches                             0,1
    notchheight                         0,0
  }
  knp10
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe20"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0019
    notches                             0,1
    notchheight                         0,0
  }
  knp11
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe21"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0015
    notches                             0,1
    notchheight                         0,0
  }
  knp12
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe22"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0015
    notches                             0,1
    notchheight                         0,0
  }
  knp13
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe23"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0015
    notches                             0,1
    notchheight                         0,0
  }
  knp14
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe24"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.002
    notches                             0,1
    notchheight                         0,0
  }
  knp15
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe25"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0018
    notches                             0,1
    notchheight                         0,0
  }
  knp16
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe26"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0023
    notches                             0,1
    notchheight                         0,0
  }
  knp17
  {
    mesh                                "knp_on.im"
    att                                 "a.savpe_on"
    kind                                "lever"
    auto-create                         1
    angles                              0.25,-0.25
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.001
    mousespeed                          -1
  }
  zerkalo_right
  {
    mesh                                "zerkalo_right.im"
    auto-create                         1
    att                                 "a.zer_rig"
    att-parent                          "default"
    limits                              0,1
    angles                              0,1
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         0,0,0,0,0,0,0,0,0
    mousespeed                          -1
    kind                                "lever"
  }
  zerkalo_left
  {
    mesh                                "zerkalo_left.im"
    auto-create                         1
    att                                 "a.zer_left"
    att-parent                          "default"
    limits                              0,1
    angles                              0,-1
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         0,0,0,0,0,0,0,0,0
    mousespeed                          -1
    kind                                "lever"
  }
  krut_wip_mach
  {
    kind                                "lever"
    mesh                                "krut_wip.im"
    att                                 "a.krutilka_mach"
    auto-create                         1
    limits                              0,1
    angles                              0,4.728
    notches                             0,0.35,0.67,1
    notchheight                         0,0,0,0
    radius                              0.05
    att-parent                          "default"
    mousespeed                          0.6
  }
  krut_wip_pom
  {
    kind                                "lever"
    mesh                                "krut_wip.im"
    att                                 "a.krutilka_pom"
    auto-create                         1
    limits                              0,1
    angles                              0,4.728
    notches                             0,0.35,0.67,1
    notchheight                         0,0,0,0
    radius                              0.05
    att-parent                          "default"
    mousespeed                          0.6
  }
  ind_sboi
  {
    mesh                                "ind_red.im"
    att                                 "a.savpe27"
    auto-create                         1
  }
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid                                    <kuid:833171:101328>
kuid-table
{
}
Файлы:
button-button.texture.txt	29 B
button.texture.txt	29 B
black_arrow_3.im	1.7 kB
black_arrow_2.im	9.2 kB
dz.im	5.7 kB
er2_1225_lux_cab.gs	100 B
epk_key.im	4.4 kB
klub_tex-klub_tex.texture.txt	51 B
ind_red.im	508 B
black_arrow_1.im	12.5 kB
klub_tex.texture.txt	31 B
knopka_black.im	2.1 kB
knopka_3.im	3.2 kB
knopka_red.im	2.1 kB
knopka_krug.im	6.7 kB
knp_sav.im	3.7 kB
kr.im	2.7 kB
knp_on.im	10.1 kB
krut_wip.im	4.3 kB
kw_er2.im	4.2 kB
l_dvor.im	10.9 kB
light_pult_er2.texture.txt	37 B
pedal.im	2.6 kB
perekl.im	6.7 kB
perekl1.im	2.5 kB
perekl2.im	4.7 kB
perekl3.im	1.4 kB
perekl_l1.im	5.7 kB
light_pult_er2.jpg	101.8 kB
perekl_proj.im	13.6 kB
pribors_er2.im	23.9 kB
r_dvor.im	10.9 kB
rb.im	13.5 kB
steklo_first_rain.im	800 B
steklo_first_rain_ochn.im	812 B
red_arrow.im	11.4 kB
steklo_first_rain_ochn_l.im	584 B
stop-stop.texture.txt	43 B
revers.im	18.9 kB
stop.jpg	85.2 kB
klub_tex.jpg	309.1 kB
stop.texture.txt	27 B
stopkran.im	2.6 kB
strelka-strelka2.texture.txt	50 B
strelka.jpg	54.5 kB
strelka.texture.txt	30 B
strelka2.jpg	20.8 kB
strelka_voltmeter.im	896 B
suppress_brakes.im	1.1 kB
switch_2.im	7.5 kB
tex1.texture.txt	29 B
tex1.jpg	264.0 kB
tex10.texture.txt	30 B
tex10.jpg	86.1 kB
tex11.texture.txt	28 B
tex11.jpg	271.0 kB
tex12.texture.txt	28 B
tex12.jpg	173.9 kB
tex13.jpg	83.9 kB
tex13.texture.txt	28 B
tex14.jpg	34.9 kB
tex14.texture.txt	28 B
tex15.jpg	84.6 kB
tex15.texture.txt	28 B
bru.im	19.5 kB
tex2.texture.txt	27 B
button.im	10.2 kB
tex3.texture.txt	27 B
395.im	6.7 kB
tex395-tex395.texture.txt	29 B
tex3.jpg	77.4 kB
tex395.texture.txt	29 B
button.jpg	84.0 kB
tex4.texture.txt	27 B
tex2.jpg	220.4 kB
tex5.texture.txt	27 B
tex395.jpg	321.5 kB
tex6.texture.txt	27 B
tex4.jpg	217.2 kB
tex7-tex7.texture.txt	43 B
tex6.jpg	74.9 kB
tex5.jpg	240.4 kB
tex7_frost.texture.txt	31 B
tex7_frost_otogrev.texture.txt	54 B
tex7.jpg	202.1 kB
tex7_frost.jpg	197.4 kB
tex7_ochn_rain.texture.txt	63 B
tex7_ochn_rain.jpg	264.1 kB
tex7_rain.texture.txt	53 B
tex7_rain.jpg	275.8 kB
tex8.texture.txt	27 B
tex9.jpg	78.0 kB
tex9.texture.txt	27 B
texlp.jpg	90.3 kB
texlp.texture.txt	30 B
tex8.jpg	280.9 kB
texnp.texture.txt	30 B
thumbnail.jpg	22.5 kB
throttle.im	51.6 kB
tx9p.texture.txt	27 B
texnp.jpg	92.4 kB
zerkalo.jpg	39.4 kB
zerkalo.texture.txt	30 B
zerkalo_left.im	21.1 kB
zerkalo_right.im	21.1 kB
tx9p.jpg	80.1 kB
tex7.bmp	768.1 kB
stop.bmp	192.1 kB
cab.im	2.3 MB
klub_tex.bmp	768.1 kB
klub_tex2.bmp	768.1 kB
tex7_rain.bmp	768.1 kB
Общий объём файлов:	10.1 MB
Версии элемента:
kuid	kind	name	build	date	size
<kuid2:833171:101328:1>	interior	Кабина ЭР2 [бот]	4.6	15.11.2024 19:02:09	5.4 MB
<kuid:833171:101328>	interior	Interior ER2 [bot]	3.7	8.06.2024 12:22:13	5.4 MB
Зависимости:
kuid	author	kind	name	build	date	size
Нет
Зависимые элементы:
kuid	author	kind	name	build	date	size
<kuid2:833171:101327:5>	Ilyon	traincar	[bot] ER2-1225 G	4.6	8.06.2024 12:22:27	8.6 MB
<kuid2:833171:101333:5>	Ilyon	traincar	[bot] ER2K-1183 G	4.6	8.06.2024 12:23:01	9.2 MB
<kuid2:833171:101336:5>	Ilyon	traincar	[bot] ER2-1122 G	4.6	8.06.2024 12:22:00	8.0 MB
<kuid2:833171:101339:5>	Ilyon	traincar	[bot] ER2R-7053 G	4.6	8.06.2024 12:22:46	9.8 MB