<kuid2:833171:100517:1> VL60k interior [bot]

Тип: Кабина
Опубликовано: 12.01.2021 22:54:11
Скачиваний: 670
Размер: 9.8 MB
Автор: Ilyon

Скачать

Interior for electric loco VL60

config.txt:

username                                "VL60k interior [bot]"
category-class                          "ZI"
cameradefault                           5
kind                                    "interior"
category-region                         "RU"
category-era                            "2000s"
trainz-build                            3.7
author                                  "Roman Norets aka theSEWEGI"
description                             "Interior for electric loco VL60"
mesh-table
{
  default
  {
    mesh                                "vl60_interior.im"
    auto-create                         1
  }
  pribory
  {
    mesh                                "pribory.im"
    att                                 "a.cntr_m"
    auto-create                         1
  }
  pribory_n
  {
    mesh                                "pribory_n.im"
    att                                 "a.cntr_m"
    auto-create                         0
  }
  kpdd
  {
    auto-create                         1
    mesh                                "kpdd.im"
    att                                 "a.speedo_needle"
    att-parent                          "default"
  }
  contr_m
  {
    mesh                                "contr_m.im"
    kind                                "lever"
    att                                 "a.cntr_m"
    auto-create                         1
    notches                             0,0.125,0.285,0.45,0.585,0.725,0.865,1
    notchheight                         0,0,0,0,0,0,0,0
    radius                              0.15
    mousespeed                          -0.1
    angles                              -0.174,2.268
    limits                              1,8
  }
  bloc
  {
    kind                                "lever"
    mesh                                "rbl367.im"
    att                                 "a.rbl367"
    auto-create                         1
    mousespeed                          -1
    radius                              0.05
    limits                              0,1
    angles                              0,-3.1
    notches                             0,1
    notchheight                         0,0
  }
  kran_254
  {
    mesh                                "254_ruchka.im"
    att                                 "a.254"
    auto-create                         1
    kind                                "lever"
    angles                              0,-2.9
    limits                              0,1
    att-parent                          "default"
    notches                             0.02,0.255,0.51,0.765,1
    notchheight                         0,0,0,0,0,0
    test-collisions                     1
    mousespeed                          -0.3
  }
  kran_394
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "394_ruchka.im"
    att                                 "a.394"
    limits                              0,1
    angles                              0,-2.164
    notches                             0,0.31,0.465,0.558,0.612,0.698,1
    notchheight                         0,0,0,0,0,0,0
    radius                              0.15
    mousespeed                          -0.6
    test-collisions                     1
  }
  wind_l
  {
    auto-create                         1
    mesh                                "wind_l2.im"
    att                                 "a.weiper_comm"
    att-parent                          "default"
    test-collisions                     0
  }
  wind_r
  {
    kind                                "animated-lever"
    auto-create                         1
    mesh                                "wind_r.im"
    anim                                "wind_r.kin"
    att                                 "a.window"
    limits                              0,1
    mousespeed                          -0.6
    att-parent                          "default"
  }
  sl2m
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "sl2m.im"
    att                                 "a.speedo_needle"
    limits                              0,46
    angles                              0,4.18
    att-parent                          "default"
  }
  clock_hr
  {
    mesh                                "hour.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,24
    angles                              0,6.283
    att-parent                          "default"
  }
  clock_min
  {
    mesh                                "minute.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,60
    angles                              0,6.283
    att-parent                          "default"
  }
  pos
  {
    kind                                "needle"
    att-parent                          "default"
    mesh                                "selsin.im"
    auto-create                         1
    att                                 "a.ur01"
    limits                              0,33
    angles                              0,6.02
    radius                              0.33
    value                               -2
  }
  revers
  {
    kind                                "lever"
    mesh                                "reverser.im"
    auto-create                         1
    att                                 "a.rev"
    limits                              0,1
    angles                              0,2.09
    notches                             0,0.25,0.5,0.7,0.85,1
    notchheight                         0,0,0,0,0,0,0
    mousespeed                          1
  }
  revers2
  {
    kind                                "lever"
    mesh                                "reverser.im"
    auto-create                         1
    att                                 "a.rev"
    limits                              0,1
    angles                              1.04,2.09
    notches                             0,0.3,0.6,1
    notchheight                         0,0,0,0
    mousespeed                          1
  }
  ampmeter_vu1
  {
    mesh                                "str_seti_new.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm01"
    limits                              0,750
    angles                              0,4.03
    att-parent                          "default"
    value                               -2
  }
  ampmeter_vu2
  {
    mesh                                "str_seti_new.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tc01"
    limits                              0,750
    angles                              0,4.03
    att-parent                          "default"
    value                               -2
  }
  voltmeter_seti
  {
    mesh                                "str_seti_new.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm03"
    limits                              0,30000
    angles                              0,4.014
    att-parent                          "default"
    value                               -2
  }
  voltmeter_needle
  {
    mesh                                "str_seti.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm02"
    limits                              0,3000
    angles                              0,3.993
    att-parent                          "default"
    value                               -2
  }
  strelka_cu
  {
    mesh                                "strelka_mn2.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.pom_gr"
    limits                              0,1000
    angles                              0,4.71
    value                               540
    att-parent                          "default"
  }
  strelka_gr
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.ur"
    limits                              0,1600
    angles                              0,4.71
    att-parent                          "default"
  }
  strelka_ur
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tc"
    limits                              0,1000
    angles                              0,4.59
    att-parent                          "default"
  }
  strelka_tm
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm"
    limits                              0,1000
    angles                              0,4.625
    att-parent                          "default"
  }
  strelka_tc
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.pm"
    limits                              0,1000
    angles                              0,4.71
    att-parent                          "default"
  }
  tifon
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch30"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  kpd_on
  {
    kind                                "lever"
    mesh                                "tumbler_small.im"
    att                                 "a.bf_lev05"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0.7,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  bf_red_left
  {
    kind                                "lever"
    mesh                                "tumbler_small.im"
    att                                 "a.bf_lev006"
    auto-create                         1
    mousespeed                          10
    radius                              2
    limits                              0,1
    angles                              -0.7,0.7
    notches                             0,1
    notchheight                         0,0
  }
  gvoff
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch01"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pantograph_1
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch04"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pantograph_2
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch05"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pant
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler_big.im"
    att                                 "a.switch03"
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
    att-parent                          "default"
  }
  cepi_upravleniya
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch06"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    onlight                             "switchlight1"
    att-parent                          "default"
  }
  radio
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch07"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  prog_tusklo
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch08"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator5
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch23"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pr_yarko
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler_big.im"
    att                                 "a.switch09"
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
    att-parent                          "default"
  }
  gvon
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch02"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  alsn
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch12"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  proverka_alsn
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch13"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  white_r_lamp
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch14"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  white_l_lamp
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch15"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  osveshenie_hod_chastey
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch17"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  svet_priborov
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch16"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  cab_yarko
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch19"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  cab_tusklo
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch20"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  obogrev_kabiny_2pechi
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch21"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  obogrev_kabiny_3pechi
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch18"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  swistok
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch22"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator4
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch24"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator3
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch25"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator2
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch26"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator1
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch27"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  kompressor
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch28"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator6
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch10"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  fazoraschepitel
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch29"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  avt_podsypka_peska
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch11"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ukbm_rb
  {
    mesh                                "ukbm_rb.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb"
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    angles                              0,-0.003
    radius                              0.05
    mousespeed                          10
  }
  sandvalve
  {
    mesh                                "sandvalve.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.sand"
    limits                              0,1
    angles                              0,0.174
    mousespeed                          15
  }
  kn3
  {
    mesh                                "knr.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_group"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  kn1
  {
    mesh                                "knb1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_group"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  kn2
  {
    mesh                                "knb2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_group"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  epk
  {
    mesh                                "epk_key.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.epk"
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
  }
  mashlight
  {
    mesh                                "tumbler_large.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.mashlight"
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
  }
  vu
  {
    mesh                                "vu.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.vu"
    limits                              0,1
    angles                              0,0.698
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              5
  }
  eptp
  {
    mesh                                "avt_kor.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_pereclyuchateli001"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              0.05
  }
  eptm
  {
    mesh                                "avt_kor.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_reostatnie_kontaktory001"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              0.05
  }
  wiper_r
  {
    mesh                                "wiper_r.im"
    anim                                "wiper_r.kin"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_r1"
  }
  wiper_l
  {
    mesh                                "wiper_r.im"
    anim                                "wiper_r.kin"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_l"
  }
  reg_r
  {
    mesh                                "reg_wiper.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_r_reg"
    kind                                "lever"
    limits                              0,1
  }
  reg_l
  {
    mesh                                "reg_wiper.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_l_reg"
    kind                                "lever"
    limits                              0,1
  }
  wipers
  {
    mesh                                "wiper.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.weiper_comm"
    kind                                "lever"
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    angles                              0,1.57
  }
}
cameralist
{
  camera0                               -0.678,-0.507,1.528,6.202,-0.189
  camera1                               0.946,-0.528,1.313,6.27,-0.242
  camera2                               -0.506,-0.359,1.496,3.082,-0.01
  camera3                               -0.865,-0.511,1.095,5.367,-0.873
  camera4                               -0.86,-0.331,1.361,6.306,-0.237
  camera5                               0.7,-0.531,1.528,6.228,-0.15
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid                                    <kuid2:833171:100517:1>
kuid-table
{
}

Файлы:

ept-ept.texture.txt	41 B
avt_kor.im	2.9 kB
hour.im	1.0 kB
knb1.im	476 B
knb2.im	476 B
epk_key.im	6.6 kB
knr.im	476 B
kpdd.im	1.2 kB
lights-lights.texture.txt	47 B
394_ruchka.im	17.4 kB
contr_m.im	17.9 kB
minute.im	2.2 kB
rbl367.im	3.9 kB
254_ruchka.im	27.0 kB
reg_wiper.im	2.2 kB
sandvalve.im	3.1 kB
selsin.im	658 B
reverser.im	10.2 kB
sl2m.im	8.9 kB
stekla-stekla.texture.txt	47 B
pribory_n.im	143.7 kB
str_seti.im	658 B
pribory.im	143.7 kB
str_seti_new.im	658 B
strelka_mn2.im	13.0 kB
strelka_mn.im	12.9 kB
tumbler_big.im	5.5 kB
tumbler_large.im	7.9 kB
tumbler_small.im	11.3 kB
thumbnail.jpg	36.9 kB
vl60.gs	84 B
ukbm_rb.im	8.8 kB
vl60.texture.txt	27 B
ept.tga	128.0 kB
vl60.jpg	605.8 kB
vl60_1.texture.txt	29 B
vl60_1.jpg	685.8 kB
vl60_10.texture.txt	30 B
vl60_10.jpg	180.6 kB
lights.tga	1.0 MB
vl60_11.texture.txt	30 B
vl60_12.texture.txt	30 B
vl60_2.texture.txt	29 B
vl60_3.texture.txt	29 B
vl60_4.texture.txt	29 B
vl60_5.texture.txt	29 B
vl60_2.jpg	152.5 kB
vl60_3.jpg	223.0 kB
vl60_6.texture.txt	29 B
vl60_5.jpg	694.4 kB
vl60_7.texture.txt	29 B
vl60_4.jpg	749.3 kB
vl60_6.jpg	783.3 kB
vl60_8.texture.txt	29 B
vl60_7.jpg	707.8 kB
vl60_9.texture.txt	29 B
vu.im	7.5 kB
wind_l2.im	4.1 kB
wind_r.kin	364 B
wiper.im	3.6 kB
wiper_r.im	7.6 kB
wiper_r.kin	2.4 kB
wind_r.im	53.6 kB
vl60_11.jpg	393.7 kB
vl60_8.jpg	712.4 kB
vl60_9.jpg	596.6 kB
vl60_12.jpg	839.0 kB
stekla.tga	2.0 MB
vl60_interior.im	2.1 MB
Общий объём файлов:	12.9 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:833171:100517:1>	interior	VL60k interior [bot]	3.7	12.01.2021 22:54:11	9.8 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:833171:100540>	Ilyon	traincar	[bot] VL60k-2558	4.6	20.04.2021 20:19:15	6.0 MB
<kuid2:833171:100540:1>	Ilyon	traincar	[bot] VL60k-2558	4.6	18.10.2021 18:48:28	6.0 MB
<kuid2:833171:100540:2>	Ilyon	traincar	[bot] VL60k-2558	4.6	1.06.2023 20:46:30	6.0 MB
<kuid2:833171:100540:3>	Ilyon	traincar	[bot] VL60k-2558	4.6	1.06.2023 20:46:30	6.0 MB
<kuid2:833171:100540:4>	Ilyon	traincar	[bot] VL60k-2558	4.6	1.06.2023 20:46:31	6.0 MB
<kuid2:833171:100540:5>	Ilyon	traincar	[bot] VL60k-2558	4.6	19.04.2023 23:59:19	6.0 MB
<kuid2:833171:100540:6>	Ilyon	traincar	[bot] VL60k-2558	4.6	16.05.2023 19:17:31	6.0 MB
<kuid2:833171:100540:7>	Ilyon	traincar	[bot] VL60k-2558	4.6	1.06.2023 18:44:24	6.0 MB
<kuid:833171:100545>	Ilyon	traincar	[bot] VL60k-1199	4.6	20.04.2021 20:21:27	6.2 MB
<kuid2:833171:100545:1>	Ilyon	traincar	[bot] VL60k-1199	4.6	18.10.2021 20:33:44	6.2 MB
<kuid2:833171:100545:2>	Ilyon	traincar	[bot] VL60k-1199	4.6	1.06.2023 20:46:30	6.2 MB
<kuid2:833171:100545:3>	Ilyon	traincar	[bot] VL60k-1199	4.6	1.06.2023 20:46:30	6.2 MB
<kuid2:833171:100545:4>	Ilyon	traincar	[bot] VL60k-1199	4.6	1.06.2023 20:46:30	6.2 MB
<kuid2:833171:100545:5>	Ilyon	traincar	[bot] VL60k-1199	4.6	19.04.2023 23:59:30	6.2 MB
<kuid2:833171:100545:6>	Ilyon	traincar	[bot] VL60k-1199	4.6	16.05.2023 19:17:40	6.2 MB
<kuid2:833171:100545:7>	Ilyon	traincar	[bot] VL60k-1199	4.6	1.06.2023 17:58:08	6.2 MB
<kuid:833171:100547>	Ilyon	traincar	[bot] VL60k-411	4.6	20.04.2021 20:12:33	5.5 MB
<kuid2:833171:100547:1>	Ilyon	traincar	[bot] VL60k-411	4.6	18.10.2021 18:39:33	5.5 MB
<kuid2:833171:100547:2>	Ilyon	traincar	[bot] VL60k-411	4.6	1.06.2023 20:46:30	5.6 MB
<kuid2:833171:100547:3>	Ilyon	traincar	[bot] VL60k-411	4.6	1.06.2023 20:46:31	5.6 MB
<kuid2:833171:100547:4>	Ilyon	traincar	[bot] VL60k-411	4.6	1.06.2023 20:46:31	5.6 MB
<kuid2:833171:100547:5>	Ilyon	traincar	[bot] VL60k-411	4.6	20.04.2023 2:43:30	5.5 MB
<kuid2:833171:100547:6>	Ilyon	traincar	[bot] VL60k-411	4.6	16.05.2023 19:18:07	5.5 MB
<kuid2:833171:100547:7>	Ilyon	traincar	[bot] VL60k-411	4.6	1.06.2023 18:06:10	5.5 MB
<kuid:833171:100557>	Ilyon	traincar	[bot] VL60k-445	4.6	12.01.2021 18:39:51	6.7 MB
<kuid2:833171:100557:1>	Ilyon	traincar	[bot] VL60k-445	4.6	18.10.2021 20:37:43	6.7 MB
<kuid2:833171:100557:2>	Ilyon	traincar	[bot] VL60k-445	4.6	1.06.2023 20:46:30	6.7 MB
<kuid2:833171:100557:3>	Ilyon	traincar	[bot] VL60k-445	4.6	1.06.2023 20:46:30	6.7 MB
<kuid2:833171:100557:4>	Ilyon	traincar	[bot] VL60k-445	4.6	1.06.2023 20:46:30	6.7 MB
<kuid2:833171:100557:5>	Ilyon	traincar	[bot] VL60k-445	4.6	19.04.2023 23:59:40	6.1 MB
<kuid2:833171:100557:6>	Ilyon	traincar	[bot] VL60k-445	4.6	16.05.2023 19:18:39	6.1 MB
<kuid2:833171:100557:7>	Ilyon	traincar	[bot] VL60k-445	4.6	1.06.2023 17:00:22	6.1 MB
<kuid2:911442:101506:1>	Nickolas88	traincar	VL60pk-1856 DCC	4.6	21.01.2024 19:43:21	19.7 MB
<kuid2:911442:101507:1>	Nickolas88	traincar	VL60pk-1842 DCC	4.6	21.01.2024 19:43:21	19.9 MB