<kuid2:553091:7139:4> RSK VL60K Interior 3SL2m

Тип: Кабина
Опубликовано: 4.02.2023 0:27:02
Скачиваний: 1645
Размер: 29.3 MB
Скачать

Кабина электровоза ВЛ60
config.txt:
kuid                                    <kuid2:553091:7139:4>
username                                "RSK VL60K Interior 3SL2m"
category-class                          "ZI"
cameradefault                           0
kind                                    "interior"
category-region                         "RU"
category-era                            "2000s"
trainz-build                            5
class                                   "vl60cab"
script                                  "vl60.gs"
author                                  "Roman Norets aka theSEWEGI"
description                             "Animated cab of an electric loco VL60"
description-ru                          "Кабина электровоза ВЛ60"
license                                 "Без согласования с автором, не распространять"
interior-controls-type                  "full"
enable-shadows-in-cab                   1
outside-visible-from-cabin              0
cabin-visible-from-outside              0
mesh-detail-level-count                 1
mesh-table-lod-transition-distances     3000
controlset                              <kuid2:151055:60033:2>
script-include-table
{
  0                                     <kuid2:553091:601:1>
}
extensions
{
  has3sl2m                              "1"
}
soundscript
{
  epk_loop
  {
    repeat-delay                        0,0
    distance                            5,10
    attachment                          "a.epk"
    trigger                             "epk"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/epk_loop.wav"
    }
  }
  394_v_start
  {
    repeat-delay                        0.01
    distance                            1.5,2
    attachment                          "a.394"
    trigger                             "394_v_1"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/394-v_start.wav"
    }
  }
  394_v_loop
  {
    repeat-delay                        0,0
    distance                            1.5,2
    attachment                          "a.394"
    trigger                             "394_v_2"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/394-v_loop.wav"
    }
  }
  394_va_start
  {
    repeat-delay                        0.01
    distance                            1.5,2
    attachment                          "a.394"
    trigger                             "394_va_1"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/394-va_start.wav"
    }
  }
  394_va_loop
  {
    repeat-delay                        0,0
    distance                            1.5,2
    attachment                          "a.394"
    trigger                             "394_va_2"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/394-va_loop.wav"
    }
  }
  394_stab
  {
    repeat-delay                        0,0
    distance                            0.1,0.5
    attachment                          "a.394"
    trigger                             "stab"
    volume                              1
    nostartdelay                        1
    sound
    {
      0                                 "sound/stab_klap.wav"
    }
  }
}
mesh-table
{
  default
  {
    mesh                                "vl60_interior.im"
    auto-create                         1
  }
  assistant
  {
    mesh-asset                          <kuid2:361619:100188:1>
    mesh                                "assistant.im"
    anim                                "assistant.kin"
    animation-loop-speed                1
    att                                 "a.pomoha"
    auto-create                         0
  }
  pribory
  {
    mesh                                "pribory.im"
    att                                 "a.cntr_m"
    auto-create                         1
  }
  pribory_n
  {
    mesh                                "pribory_n.im"
    att                                 "a.cntr_m"
    auto-create                         0
  }
  kpdd
  {
    auto-create                         1
    mesh                                "kpdd.im"
    att                                 "a.speedo_needle"
    att-parent                          "default"
  }
  kpdn
  {
    auto-create                         0
    mesh                                "kpdn.im"
    att                                 "a.speedo_needle"
    att-parent                          "default"
  }
  contr_m
  {
    mesh                                "contr_m.im"
    kind                                "lever"
    att                                 "a.cntr_m"
    auto-create                         1
    notches                             0,0.125,0.285,0.45,0.585,0.725,0.865,1
    notchheight                         0,0,0,0,0,0,0,0
    radius                              0.15
    mousespeed                          -0.1
    angles                              -0.174,2.268
    limits                              1,8
  }
  bloc
  {
    kind                                "lever"
    mesh                                "rbl367.im"
    att                                 "a.rbl367"
    auto-create                         1
    mousespeed                          -1
    radius                              0.05
    limits                              0,1
    angles                              0,-3.1
    notches                             0,1
    notchheight                         0,0
  }
  kran_254
  {
    mesh                                "254_ruchka.im"
    att                                 "a.254"
    auto-create                         1
    kind                                "lever"
    angles                              0,-2.9
    limits                              0,1
    att-parent                          "default"
    notches                             0.02,0.255,0.51,0.765,1
    notchheight                         0,0,0,0,0,0
    test-collisions                     1
    mousespeed                          -0.3
  }
  kran_394
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "394_ruchka.im"
    att                                 "a.394"
    limits                              0,1
    angles                              0,-2.164
    notches                             0,0.31,0.465,0.558,0.612,0.698,1
    notchheight                         0,0,0,0,0,0,0
    radius                              0.15
    mousespeed                          -0.6
    test-collisions                     1
  }
  wind_l
  {
    auto-create                         1
    mesh                                "wind_l2.im"
    att                                 "a.weiper_comm"
    att-parent                          "default"
    test-collisions                     0
  }
  wind_l1
  {
    auto-create                         0
    mesh                                "wind_l1.im"
    att                                 "a.weiper_comm"
    att-parent                          "default"
    test-collisions                     0
  }
  wind_r
  {
    kind                                "animated-lever"
    auto-create                         1
    mesh                                "wind_r.im"
    anim                                "wind_r.kin"
    att                                 "a.window"
    limits                              0,1
    mousespeed                          -0.6
    att-parent                          "default"
  }
  sl2m
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "sl2m.im"
    att                                 "a.speedo_needle"
    limits                              0,46
    angles                              0,4.18
    att-parent                          "default"
  }
  clock_hr
  {
    mesh                                "hour.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,24
    angles                              0,6.283
    att-parent                          "default"
  }
  clock_min
  {
    mesh                                "minute.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,60
    angles                              0,6.283
    att-parent                          "default"
  }
  pos
  {
    kind                                "needle"
    att-parent                          "default"
    mesh                                "selsin.im"
    auto-create                         1
    att                                 "a.ur01"
    limits                              0,33
    angles                              0,6.02
    radius                              0.33
    value                               -2
  }
  revers
  {
    kind                                "lever"
    mesh                                "reverser.im"
    auto-create                         1
    att                                 "a.rev"
    limits                              0,1
    angles                              0,2.09
    notches                             0,0.25,0.5,0.7,0.85,1
    notchheight                         0,0,0,0,0,0,0
    mousespeed                          1
  }
  revers2
  {
    kind                                "lever"
    mesh                                "reverser.im"
    auto-create                         1
    att                                 "a.rev"
    limits                              0,1
    angles                              1.04,2.09
    notches                             0,0.3,0.6,1
    notchheight                         0,0,0,0
    mousespeed                          1
  }
  ampmeter_vu1
  {
    mesh                                "str_seti_new.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm01"
    limits                              0,750
    angles                              0,4.03
    att-parent                          "default"
    value                               -2
  }
  ampmeter_vu2
  {
    mesh                                "str_seti_new.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tc01"
    limits                              0,750
    angles                              0,4.03
    att-parent                          "default"
    value                               -2
  }
  voltmeter_seti
  {
    mesh                                "str_seti_new.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm03"
    limits                              0,30000
    angles                              0,4.014
    att-parent                          "default"
    value                               -2
  }
  voltmeter_needle
  {
    mesh                                "str_seti.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm02"
    limits                              0,3000
    angles                              0,3.993
    att-parent                          "default"
    value                               -2
  }
  strelka_cu
  {
    mesh                                "strelka_mn2.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.pom_gr"
    limits                              0,1000
    angles                              0,4.71
    value                               540
    att-parent                          "default"
  }
  strelka_gr
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.ur"
    limits                              0,1600
    angles                              0,4.71
    att-parent                          "default"
  }
  strelka_ur
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tc"
    limits                              0,1000
    angles                              0,4.59
    att-parent                          "default"
  }
  strelka_tm
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm"
    limits                              0,1000
    angles                              0,4.625
    att-parent                          "default"
  }
  strelka_tc
  {
    mesh                                "strelka_mn.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.pm"
    limits                              0,1000
    angles                              0,4.71
    att-parent                          "default"
  }
  tifon
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch30"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  kpd_on
  {
    kind                                "lever"
    mesh                                "tumbler_small.im"
    att                                 "a.bf_lev05"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0.7,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  bf_red_left
  {
    kind                                "lever"
    mesh                                "tumbler_small.im"
    att                                 "a.bf_lev006"
    auto-create                         1
    mousespeed                          10
    radius                              2
    limits                              0,1
    angles                              -0.7,0.7
    notches                             0,1
    notchheight                         0,0
  }
  gvoff
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch01"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pantograph_1
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch04"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pantograph_2
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch05"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pant
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler_big.im"
    att                                 "a.switch03"
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
    att-parent                          "default"
  }
  cepi_upravleniya
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch06"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    onlight                             "switchlight1"
    att-parent                          "default"
  }
  radio
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch07"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  prog_tusklo
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch08"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator5
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch23"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  pr_yarko
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "tumbler_big.im"
    att                                 "a.switch09"
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
    att-parent                          "default"
  }
  gvon
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch02"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  alsn
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch12"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  proverka_alsn
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch13"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  white_r_lamp
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch14"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  white_l_lamp
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch15"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  osveshenie_hod_chastey
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch17"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  svet_priborov
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch16"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  cab_yarko
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch19"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  cab_tusklo
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch20"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  obogrev_kabiny_2pechi
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch21"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  obogrev_kabiny_3pechi
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch18"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  swistok
  {
    kind                                "pulllever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch22"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator4
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch24"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator3
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch25"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator2
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch26"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator1
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch27"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  kompressor
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch28"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilyator6
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch10"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  fazoraschepitel
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch29"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  avt_podsypka_peska
  {
    kind                                "lever"
    mesh                                "tumbler_big.im"
    att                                 "a.switch11"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0,0
  }
  als_0
  {
    mesh                                "alsn_green.IM"
    att                                 "a.alsn"
    kind                                "light"
    auto-create                         1
  }
  als_1
  {
    mesh                                "alsn_yellow.IM"
    att                                 "a.alsn"
    kind                                "light"
    auto-create                         1
  }
  als_2
  {
    mesh                                "alsn_k-g.IM"
    att                                 "a.alsn"
    kind                                "light"
    auto-create                         1
  }
  als_3
  {
    mesh                                "alsn_red.IM"
    att                                 "a.alsn"
    kind                                "light"
    auto-create                         1
  }
  als_4
  {
    mesh                                "alsn_white.IM"
    att                                 "a.alsn"
    kind                                "light"
    auto-create                         1
  }
  ukbm_rb
  {
    mesh                                "ukbm_rb.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb"
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    angles                              0,-0.003
    radius                              0.05
    mousespeed                          10
  }
  lamp
  {
    mesh                                "lamp.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.rb"
  }
  sandvalve
  {
    mesh                                "sandvalve.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.sand"
    limits                              0,1
    angles                              0,0.174
    mousespeed                          15
  }
  kn3
  {
    mesh                                "knr.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_group"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  kn1
  {
    mesh                                "knb1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_group"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  kn2
  {
    mesh                                "knb2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_group"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  epk
  {
    mesh                                "epk_key.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.epk"
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
  }
  mashlight
  {
    mesh                                "tumbler_large.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.mashlight"
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              0.05
  }
  vu
  {
    mesh                                "vu.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.vu"
    limits                              0,1
    angles                              0,0.698
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              5
  }
  eptp
  {
    mesh                                "avt_kor.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_pereclyuchateli001"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              0.05
  }
  eptm
  {
    mesh                                "avt_kor.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avt_reostatnie_kontaktory001"
    limits                              0,1
    angles                              0,-1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              0.05
  }
  lamp_fr1
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_fr1"
  }
  lamp_td
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_td"
  }
  lamp_ohp
  {
    mesh                                "lamp_green.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_ohp"
  }
  lamp_vu1
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_vu1"
  }
  lamp_vu2
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_vu2"
  }
  lamp_vu2_2
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_vu2_2"
  }
  lamp_tm
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_tm"
  }
  lamp_mn1
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_mn1"
  }
  lamp_mn2
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_mn2"
  }
  lamp_tr
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_tr"
  }
  lamp_gu
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_gu"
  }
  lamp_rp
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_rp"
  }
  lamp_rz
  {
    mesh                                "lamp_red.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.lamp_rz"
  }
  lamp_rb
  {
    mesh                                "lamp_white.im"
    att-parent                          "default"
    att                                 "a.lamp_rb"
  }
  wind_d_r
  {
    mesh                                "wind_d_r.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.wiper_r1"
  }
  wind_c_r
  {
    mesh                                "wind_c_r.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.wiper_r1"
  }
  wiper_r
  {
    mesh                                "wiper_r.im"
    anim                                "wiper_r.kin"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_r1"
  }
  wind_d_l
  {
    mesh                                "wind_d_l.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.wiper_l"
  }
  wind_c_l
  {
    mesh                                "wind_c_l.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.wiper_l"
  }
  wiper_l
  {
    mesh                                "wiper_r.im"
    anim                                "wiper_r.kin"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_l"
  }
  reg_r
  {
    mesh                                "reg_wiper.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_r_reg"
    kind                                "lever"
    limits                              0,1
  }
  reg_l
  {
    mesh                                "reg_wiper.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.wiper_l_reg"
    kind                                "lever"
    limits                              0,1
  }
  wind_d
  {
    mesh                                "wind_d.im"
    auto-create                         0
    att-parent                          "default"
    att                                 "a.cntr_m"
  }
  wind_d_s
  {
    mesh                                "wind_d_s.im"
    auto-create                         0
    att-parent                          "wind_r"
    att                                 "a.wind"
  }
  wipers
  {
    mesh                                "wiper.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.weiper_comm"
    kind                                "lever"
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    angles                              0,1.57
  }
  cab_black
  {
    auto-create                         1
    mesh                                "cab_black.im"
    att                                 "a.pomoha"
    att-parent                          "default"
  }
}
cameralist
{
  camera0                               -0.07,-0.441,1.519,6.309,-0.17
  camera1                               0.946,-0.528,1.313,6.27,-0.242
  camera2                               -0.506,-0.359,1.496,3.082,-0.01
  camera3                               -0.865,-0.511,1.095,5.367,-0.873
  camera4                               -0.86,-0.331,1.361,6.306,-0.237
}
thumbnails
{
  0
  {
    image                               "screen.jpg"
    width                               512
    height                              384
  }
}
string-table
{
  kran_6                                "Кран 394 | Экстренное торможение"
  kran_5                                "Кран 394 | Служебное торможение"
  kran_5a                               "Кран 394 | Торможение замедленым темпом"
  kran_4                                "Кран 394 | Перекрыша с питанием"
  kran_3                                "Кран 394 | Перекрыша без питания"
  kran_2                                "Кран 394 | Поездное"
  kran_1                                "Кран 394 | Отпуск и зарядка"
  controler_0                           "Контроллер | БВ"
  controler_1                           "Контроллер | 0"
  controler_2                           "Контроллер | АВ"
  controler_3                           "Контроллер | РВ"
  controler_4                           "Контроллер | ФВ"
  controler_5                           "Контроллер | ФП"
  controler_6                           "Контроллер | РП"
  controler_7                           "Контроллер | АП"
  reverser_0                            "Реверсор | Назад | ПП"
  reverser_1                            "Реверсор | Нейтраль"
  reverser_2                            "Реверсор | Вперёд | ПП"
  reverser_3                            "Реверсор | Вперёд | ОП I"
  reverser_4                            "Реверсор | Вперёд | ОП II"
  reverser_5                            "Реверсор | Вперёд | ОПIII"
  edtr_0                                "ЭДТ | 0"
  edtr_1                                "ЭДТ | П"
  edtr_2                                "ЭДТ | ПТ"
  edtr_3                                "ЭДТ | Т"
  klub-obj-type-0                       "СВЕТОФОР"
  _alsen                                "ЕН"
  _noalsen                              "ЕН"
  _noals                                "Нк"
  _als0                                 "АЛС"
  _als25                                "F25"
  _als50                                "F50"
  _als75                                "F75"
  _alsuni                               "FU"
  _pab                                  "ПАБ"
  _cproc                                "Т"
  _pull                                 "Пп"
  _pullfreight                          "Пг"
  klub_rk_on                            "ЯЧЕЙКА РК ИСПРАВНА"
  klub_rk_off                           "ЯЧЕЙКА РК НЕИСПРАВНА"
  klub_rk_no                            "ЯЧЕЙКА РК ОТСУТСТВУЕТ"
  klub-als-ek                           "ЭК"
  klub-als-50                           "50"
  klub-als-175                          "ЕН"
  klub-track-true                       "ПР"
  klub-track-false                      "НП"
  klub-epk-sryv                         "СРЫВ ЭПК"
  klub-pr-ur1                           "ДАВЛЕНИЕ В УР1"
  klub-pr-ur2                           "ДАВЛЕНИЕ В УР2"
  nomer_mash                            "НОМЕР МАШИНИСТА :"
  nomer_poezda                          "НОМЕР ПОЕЗДА"
  dlina_os                              "ДЛИНА В ОСЯХ"
  dlina_vag                             "ДЛИНА В ВАГОНАХ"
  mass_k                                "МАССА"
  nomer_puti                            "НОМЕР ПУТИ"
  vvedite_com                           "ВВЕДИТЕ КОМАНДУ:"
  speed-bel                             "СКОРОСТЬ НА БЕЛЫЙ:"
  pravilnost                            "ПРИЗНАК ПРАВИЛЬНОСТИ"
  trak_true                             "ПР"
  trak_notrue                           "НП"
  ogran_spd                             "ОГРАНИЧЕНИЕ"
  klub-koord                            "КООРДИНАТА (М):"
  klub-izm-koord                        "ИЗМ. КООРДИНАТЫ:"
  hasek                                 "ЭК"
  ek_st_100                             "Александров"
  ek_st_101                             "196 КМ"
  ek_st_102                             "ЯСТРЕБКИ"
  ek_st_km                              "КМ"
  klub-pr-tm                            "ДАВЛЕНИЕ В ТМ"
  klub-pr-tc                            "ДАВЛЕНИЕ В ТЦ"
  chet                                  "ПР"
  nchet                                 "НП"
  klub-u-target-type-0                  "СВЕТОФОР"
  klub-u-target-type-1                  "СТАНЦИЯ"
  klub-u-target-type-2                  "ОПАСНОЕ МЕСТО"
  klub-u-target-type-3                  "ПЛАТФОРМА"
  klub-u-target-type-4                  "МОСТ"
  klub-u-target-type-5                  "НЕЙТРАЛЬНАЯ ВСТАВКА"
  klub-u-target-type-6                  "ПРОБА ТОРМОЗОВ"
  klub-u-target-type-7                  "ТОКОРАЗДЕЛ"
  klub-u-target-type-8                  "ПЕРЕЕЗД"
  klub-u-target-type-9                  "СИГНАЛ"
  klub-u-target-type-10                 "КТСМ\ДИСК"
  klub-u-target-type-11                 "ПЕРЕХОД"
  klub-u-target-type-12                 "ГАЗОПРОВОД"
  klub-u-target-type-13                 "ПУТЕПРОВОД"
  klub-u-target-type-14                 "СТРЕЛКА"
  pr2                                   "Грузовой"
  pr3                                   "Маневровый"
  svpr                                  "Освещение приборов"
  zts                                   "Задатчик тормозной силы"
  contr_m                               "Контроллер"
  bloc                                  "Ручка блокировки 367"
  edt_controller                        "Реостатный тормоз"
  revers                                "Реверсор и ОП"
  pesok                                 "Песок"
  tifon                                 "Тифон"
  gvoff                                 "Выключение ГВ"
  pantograph_2                          "ТПП"
  pantograph_1                          "ТПЗ"
  pant                                  "Токоприёмники"
  cepi_upravleniya                      "Цепи упр-я"
  radio                                 "Радиостанция"
  prog_tusklo                           "Прожектор"
  signalisaciya                         "Сигнализация"
  pr_yarko                              "Тускло/ярко"
  gvon                                  "Вкл. ГВ и Возв. реле"
  alsn                                  "Катушки АЛСН"
  proverka_alsn                         "Проверка АЛСН"
  white_r_lamp                          "БФ правый"
  white_l_lamp                          "БФ левый"
  osveshenie_hod_chastey                "Осв. Ход. Частей"
  cab_yarko                             "Яркое осв. кабины"
  cab_tusklo                            "Тусклое осв. кабины"
  obogrev_kabiny_2pechi                 "Обогрев кабины II печи"
  obogrev_kabiny_3pechi                 "Обогрев кабины III печи"
  swistok                               "Свисток"
  ventelyator6                          "МВ6"
  ventelyator5                          "МВ5"
  ventelyator4                          "МВ4"
  ventelyator3                          "МВ3"
  ventelyator2                          "МВ2"
  ventelyator1                          "МВ1"
  kompressor                            "Компрессор"
  vspom                                 "Фазорасщипитель"
  fazoraschepitelfazoraschepitel        "Вспоммашины"
  avt_podsypka_peska                    "Автоподача песка"
  osveshenie                            "Осв. приборов"
  alsn_otkl_tumbl                       "Без АЛСН"
  saut                                  "САУТ/АЛСН"
  sekcia1                               "Секция 2"
  sekcia3                               "Секция 3"
  sekcia4                               "Секция 4"
  otkls1                                "Отключение секции 1"
  otkls2                                "Отключение секции 1"
  otkls3                                "Отключение секции 2"
  otkls4                                "Отключение секции 4"
  ukbm_rb                               "Рукоятка бдительности"
  epk_tumbler                           "ЭПК"
  radio_ukv_tumbler                     "Радио УКВ"
  radioswyaz_tumbler                    "Радиосвязь"
  radio_kv_tumbler                      "Радио КВ"
  red_l_lamp                            "Левый красный/белый"
  red_r_lamp                            "Правый красный/белый"
  t_ept                                 "ЭПТ"
  epk                                   "ЭПК-150"
  kr254                                 "кран 254"
  kpd                                   "питание КПД"
  mashlight                             "Освщение МО"
  sandvalve                             "Песок 1-я ось"
}
kuid-table
{
  dspradio                              <kuid:553091:601201>
  sl                                    <kuid2:553091:602:1>
  0                                     <kuid2:553091:601:1>
  1                                     <kuid2:361619:100188:1>
  2                                     <kuid2:151055:60033:2>
}
Файлы:
sound
sound / 394-v_start.wav	31.7 kB
sound / 394-v_stop.wav	48.9 kB
sound / 394-va_start.wav	21.5 kB
sound / 394-va_loop.wav	40.2 kB
sound / epk_loop.wav	34.7 kB
sound / stab_klap.wav	60.0 kB
sound / 394-v_loop.wav	195.3 kB
alsn_green.im	4.3 kB
avt_kor.im	2.9 kB
alsn_yellow.im	4.3 kB
alsn_white.im	4.3 kB
ept-ept.texture.txt	41 B
epk_key.im	6.6 kB
alsn_k-g.im	4.3 kB
alsn_red.im	4.3 kB
knb1.im	476 B
knb2.im	476 B
contr_m.im	17.9 kB
cab_black.im	12.3 kB
hour.im	1.0 kB
lamp_red.im	684 B
394_ruchka.im	17.4 kB
knr.im	476 B
lamp_green.im	684 B
kpdn.im	1.2 kB
minute.im	2.2 kB
lamp_white.im	1.2 kB
kpdd.im	1.2 kB
lights-lights.texture.txt	47 B
254_ruchka.im	27.0 kB
reg_wiper.im	2.2 kB
lamp.im	13.5 kB
sandvalve.im	3.1 kB
rbl367.im	3.9 kB
selsin.im	658 B
sl2m.im	8.9 kB
reverser.im	10.2 kB
screen.jpg	21.7 kB
stekla-stekla.texture.txt	47 B
str_seti_new.im	658 B
str_seti.im	658 B
strelka_mn2.im	13.0 kB
strelka_mn.im	12.9 kB
pribory.im	143.7 kB
tumbler_big.im	5.5 kB
tumbler_large.im	7.9 kB
assistant.im	183.1 kB
ukbm_rb.im	8.8 kB
vl60.gs	84 B
vl60.texture.txt	27 B
tumbler_small.im	11.3 kB
pribory_n.im	143.7 kB
vl60_1.texture.txt	29 B
ept.tga	128.0 kB
vl60_10.texture.txt	30 B
vl60_11.texture.txt	30 B
vl60_11.jpg	1.4 MB
vl60_12.texture.txt	30 B
vl60_10.jpg	1.7 MB
vl60.jpg	1.6 MB
vl60_2.texture.txt	29 B
vl60_1.jpg	2.3 MB
vl60_12.jpg	2.4 MB
vl60_3.texture.txt	29 B
lights.tga	4.0 MB
vl60_2.jpg	1.2 MB
vl60_4.texture.txt	29 B
vl60_5.texture.txt	29 B
vl60_6.texture.txt	29 B
vl60_3.jpg	1.9 MB
vl60_6.jpg	907.5 kB
vl60_7.texture.txt	29 B
vl60_8.texture.txt	29 B
vl60_4.jpg	2.4 MB
vl60_9.texture.txt	29 B
vl60_5.jpg	1.9 MB
vu.im	7.5 kB
wind_c_l.im	2.3 kB
wind_c_r.im	2.3 kB
wind_d.im	11.7 kB
wind_d_l.im	2.3 kB
wind_d_r.im	2.3 kB
wind_d_s.im	4.1 kB
wind_l1.im	4.1 kB
wind_l2.im	4.1 kB
wind_r.im	53.6 kB
wind_r.kin	364 B
wiper.im	3.6 kB
wiper_r.im	7.6 kB
wiper_r.kin	2.4 kB
vl60_7.jpg	2.2 MB
vl60_8.jpg	2.1 MB
vl60_9.jpg	1.9 MB
vl60_interior.im	2.1 MB
stekla.tga	8.0 MB
Общий объём файлов:	39.2 MB
Версии элемента:
kuid	kind	name	build	date	size
<kuid2:553091:7139:4>	interior	RSK VL60K Interior 3SL2m	5	4.02.2023 0:27:02	29.3 MB
<kuid2:553091:7139:3>	interior	RSK VL60K Interior 3SL2m	3.7	25.04.2023 3:37:53	29.3 MB
<kuid2:553091:7139:2>	interior	RSK VL60K Interior 3SL2m	3.7	6.05.2023 13:01:20	29.3 MB
<kuid2:553091:7139:1>	interior	Кабина ВЛ60 с 3СЛ2м	3.7	20.05.2023 9:51:11	29.0 MB
<kuid:553091:7139>	interior	Кабина ВЛ60 с 3СЛ2м	3.7	21.10.2023 6:47:36	28.8 MB
Зависимости:
kuid	author	kind	name	build	date	size
<kuid2:151055:60033:2>	Эрендир	controlset	Клавиатура для дизельных локомотивов	3.7	7.01.2018 16:41:22	44.2 kB
<kuid2:361619:100188:1>	DUMONT	mesh	ТЭП60 Помошник машиниста	3.7	22.04.2023 21:05:18	2.7 MB
<kuid2:553091:601:4>	#553091	library	RSK VL60K/PK scripts	4.6	19.12.2022 23:36:06	72.0 kB
<kuid2:553091:602:5>	#553091	enginesound	RSK VL60/80 Sound Library	5	21.09.2023 7:33:27	21.2 MB
<kuid:553091:601201>	#553091	hornsound	RSK DSP Radio sounds	3.7	23.04.2023 5:09:19	22.6 kB
Всего связей: 5, неизвестных связей: 0
Зависимые элементы:
kuid	author	kind	name	build	date	size
<kuid2:553091:1198:2>	#553091	traincar	RSK VL60K-1198	3.7	28.03.2020 12:26:30	39.5 MB
<kuid:553091:60373>	#553091	traincar	VL60k-373 risk221	3.7	1.05.2023 16:18:33	57.0 MB
<kuid2:553091:60373:1>	#553091	traincar	RSK VL60K-373	4.6	20.03.2022 15:31:58	100.3 MB
<kuid:553091:60739>	#553091	traincar	VL60k-739 risk221	3.7	10.05.2023 5:01:17	60.7 MB
<kuid2:553091:60739:1>	#553091	traincar	RSK VL60K-739	4.6	29.04.2023 13:57:58	116.7 MB
<kuid:553091:600001>	#553091	traincar	RSK 2VL60K-0001A	3.7	25.04.2023 21:56:31	58.9 MB
<kuid2:553091:600001:1>	#553091	traincar	RSK 2VL60K-2464A	4.6	20.03.2022 15:31:58	110.1 MB
<kuid:553091:600002>	#553091	traincar	RSK 2VL60K-0001B	3.7	25.04.2023 21:56:31	58.9 MB
<kuid2:553091:600002:1>	#553091	traincar	RSK 2VL60K-2465B	4.6	20.03.2022 15:31:58	110.7 MB
<kuid:641413:100215>	#641413	traincar	vl60k-1664	3.7	4.11.2021 11:43:25	51.7 MB
<kuid:641413:100218>	#641413	traincar	VL60k-1668	3.7	23.07.2020 19:14:38	49.1 MB
<kuid:641413:100222>	#641413	traincar	2Vl60k-404	3.7	10.05.2023 5:01:17	49.1 MB
<kuid:826694:100112>	vlados7214	traincar	VL60K-411	3.7	19.06.2025 9:56:08	39.0 MB
Входит в пакеты:
RSK 2VL60K-0001