<kuid:432925:127> Кабина 2ТЭ116-1685

Тип: Кабина
Опубликовано: 19.04.2023 13:04:53
Скачиваний: 944
Размер: 17.9 MB

Скачать

Кабина тепловоза 2ТЭ116-выпускающегося на Луганском (Ворошиловград) тепловозостроительном заводе на Украине.

config.txt:

kuid                                    <kuid:432925:127>
username                                "Cab 2TE116-1685"
username-ru                             "Кабина 2ТЭ116-1685"
kind                                    "interior"
cameradefault                           0
category-class                          "ZI"
author                                  "модель-Rokky, текстуры-Rokky, alekseymesch, фотоматериал-Zmitrok, alekseymesch"
contact-email                           "plazma_wc@rambler.ru"
contact-website                         "http://www.trainzua.com"
category-region                         "RU"
category-era                            "1970s;1980s;1990s;2000s"
description                             "The cab of the locomotive 2TE116-release on Lugansk (Voroshilovgrad) diesel locomotive factory in Ukraine."
description-ru                          "Кабина тепловоза 2ТЭ116-выпускающегося на Луганском (Ворошиловград) тепловозостроительном заводе на Украине."
license                                 "free for non commercial use"
script                                  "cab2te116.gs"
class                                   "cab2te116"
trainz-build                            3.4
script-include-table
{
  0                                     <kuid2:432925:100016:2>
}
cameralist
{
  camera0                               -0.772,0.456,0.188,0,0
  camera1                               1.105,0.397,0.18,0,0
  camera2                               0.444,-0.56,0.2,0,0
}
mesh-table
{
  default
  {
    mesh                                "2te116_interiorA.im"
    auto-create                         1
  }
  sl2m
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speedo_needle.im"
    att                                 "a.speedo_needle"
    limits                              0,41.700001
    angles                              0,4.1
    att-parent                          "default"
    test-collisions                     0
  }
  throttle_lever2
  {
    kind                                "lever"
    mesh                                "kontr.IM"
    auto-create                         1
    att                                 "a.km"
    att-parent                          "default"
    limits                              0,15
    angles                              0,3.9
    radius                              0.01
    mousespeed                          -0.12
    tooltip-text                        ""
  }
  independantbrake_lever2
  {
    mesh                                "rucka254.IM"
    att                                 "a.254"
    auto-create                         1
    kind                                "lever"
    angles                              0,-2.9
    limits                              0,100
    att-parent                          "default"
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0.001,0.001,0.001,0.001,0.001
    radius                              0.01
    test-collisions                     1
    mousespeed                          -1
    tooltip-text                        ""
  }
  trainbrake_lever2
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "rucka394.IM"
    att                                 "a.394"
    limits                              0,100
    angles                              0,-2
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0.001,0.001,0.001,0.001,0.001,0.001,0.001
    radius                              0.15
    mousespeed                          -1
    tooltip-text                        ""
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reversor.IM"
    auto-create                         1
    att                                 "a.revers"
    limits                              0,2
    angles                              0,0.6
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          1
    tooltip-text                        ""
  }
  clock_hr
  {
    mesh                                "strelka_chasovaya.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,24
    angles                              0,6.283
    att-parent                          "default"
  }
  clock_min
  {
    mesh                                "strelka_minutnaya.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.chasy"
    limits                              0,60
    angles                              0,6.283
    att-parent                          "default"
  }
  napruga_generatora
  {
    mesh                                "st_amp.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.nagr_gen"
    limits                              0,1000
    angles                              0,1.42
    att-parent                          "default"
    value                               -2
  }
  nagruzka_generatora
  {
    mesh                                "st_amp.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.napr_gen"
    limits                              0,6000
    angles                              0,0.81
    att-parent                          "default"
    value                               -2
  }
  tok_zaryada_ab
  {
    mesh                                "st_amp.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tok_zarayda_ab"
    limits                              -150,150
    angles                              -0.9,0.9
    att-parent                          "default"
    value                               -2
  }
  ukaz_povreg
  {
    mesh                                "st_amp.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.up"
    limits                              0,8
    angles                              0,1.6
    att-parent                          "default"
    value                               -2
  }
  bploco_equaliser
  {
    mesh                                "strelka.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.ur"
    limits                              0,1600
    angles                              0,7.2
    att-parent                          "default"
  }
  bplocomain_needle
  {
    mesh                                "strelka_kr.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm"
    limits                              0,1600
    angles                              0,4.2
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    mesh                                "strelka.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_pm"
    limits                              0,1600
    angles                              0,4.63
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    mesh                                "strelka.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tc"
    limits                              0,1600
    angles                              0,7
    att-parent                          "default"
  }
  pr_tuskl0
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pr_tusklo"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  pr_yarko
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pr_yarko"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  hs03
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs03"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  vent04
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.vent04"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  vent03
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.vent03"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  vent02
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.vent02"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  vent01
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.vent1"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  upravlenie_holodilnikom
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.upr_holod"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  upravlenie_teplovozom
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.upr_tepl"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  dvigenie
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.dvig"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  kontrol_signalisacii
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.kontrol_signalisacii"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  perehody
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.perehody"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  avtopodacha_peska
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs06"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  hs
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  buf_z_pr
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.bf_right_zad"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  buf_z_lev
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.bf_left_zad"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  buf_p_pr
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.bf_pered_right"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  buf_p_lev
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.bf_pered_left"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  light_kab
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.svet_kab"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  light_pult
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.svet_pult"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  ukazatel_povregdeniy
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.ukaz_povreg"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  povregdenie
  {
    mesh                                "tumbler_m.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.povregdenie"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  top_nasos1
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.top_nasos1"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  top_nasos2
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.top_nasos2"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  zapusk1
  {
    mesh                                "zap.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.zapusk1"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  zapusk2
  {
    mesh                                "zap.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.zapusk2"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  vyzov
  {
    mesh                                "kn3.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.vysov"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  otpusk_tormoza
  {
    mesh                                "kn3.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.otpusk_tormoza"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  hs02
  {
    mesh                                "kn1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs02"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  hs04
  {
    mesh                                "kn1.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs04"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  hs05
  {
    mesh                                "kn2.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs05"
    limits                              0,1
    angles                              0,-0.006
    mousespeed                          15
    tooltip-text                        ""
  }
  swet_stola
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.upr_holod01"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  als_white
  {
    mesh                                "kn3.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.otpusk_tormoza01"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  ukbm_rb_mehana
  {
    mesh                                "rb.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb_mehana"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  ukbm_rb_mehana_n
  {
    mesh                                "rb.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb_m_niz"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  maslo1
  {
    mesh                                "st_P_masla.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.maslo1"
    limits                              0,10
    angles                              0,1.6
    att-parent                          "default"
    value                               -2
  }
  maslo2
  {
    mesh                                "st_P_masla.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.maslo2"
    limits                              0,10
    angles                              0,1.6
    att-parent                          "default"
    value                               -2
  }
  st_temp_v1
  {
    mesh                                "st_temp_v.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.temperatura_vody1"
    limits                              0,120
    angles                              0,3.53
    att-parent                          "default"
    value                               -2
  }
  st_temp_m1
  {
    mesh                                "st_temp_v.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.temperatura_masla1"
    limits                              0,120
    angles                              0,3.53
    att-parent                          "default"
    value                               -2
  }
  st_temp_v2
  {
    mesh                                "st_temp_v.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.temperatura_vody2"
    limits                              0,120
    angles                              0,3.53
    att-parent                          "default"
    value                               -2
  }
  st_temp_m2
  {
    mesh                                "st_temp_v.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.temperatura_masla2"
    limits                              0,120
    angles                              0,3.53
    att-parent                          "default"
    value                               -2
  }
  tifon_sw
  {
    mesh                                "tifon.IM"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_mehana"
    limits                              -1,1
    angles                              -0.2,0.2
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          5
    tooltip-text                        ""
  }
  tifon_sw1
  {
    mesh                                "tifon.IM"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tf_pomohi"
    limits                              -1,1
    angles                              -0.2,0.2
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          5
    tooltip-text                        ""
  }
  sbros_nagruzki1
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.sbros_nagruzki1"
    auto-create                         0
    att-parent                          "default"
  }
  sbros_nagruzki2
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.sbros_nagruzki2"
    auto-create                         0
    att-parent                          "default"
  }
  uroven_vody
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.uroven_vody"
    auto-create                         0
    att-parent                          "default"
  }
  davlenie_masla
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.davlenie_masla"
    auto-create                         0
    att-parent                          "default"
  }
  obryv_tm
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.obryv_TM"
    auto-create                         0
    att-parent                          "default"
  }
  zatormogeno
  {
    kind                                "light"
    mesh                                "lampa_white.im"
    att                                 "a.zatormogeno"
    auto-create                         0
    att-parent                          "default"
  }
  silovaya_zachita
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.rz"
    auto-create                         0
    att-parent                          "default"
  }
  ohlagdenie
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.ohlagdenie"
    auto-create                         0
    att-parent                          "default"
  }
  disel2
  {
    kind                                "light"
    mesh                                "lampa_white.im"
    att                                 "a.disel2"
    auto-create                         0
    att-parent                          "default"
  }
  pogar
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.pogar"
    auto-create                         0
    att-parent                          "default"
  }
  rabota_edt1
  {
    kind                                "light"
    mesh                                "lampa_white.im"
    att                                 "a.edt1"
    auto-create                         0
    att-parent                          "default"
  }
  rabota_edt2
  {
    kind                                "light"
    mesh                                "lampa_white.im"
    att                                 "a.edt02"
    auto-create                         0
    att-parent                          "default"
  }
  zachita_edt1
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.zashita_edt01"
    auto-create                         0
    att-parent                          "default"
  }
  zachita_edt2
  {
    kind                                "light"
    mesh                                "lampa_red.im"
    att                                 "a.zashita_edt02"
    auto-create                         0
    att-parent                          "default"
  }
  epk_key
  {
    kind                                "lever"
    mesh                                "epk_key.IM"
    att                                 "a.epk"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,-1.57
    notches                             0,1
    notchheight                         0,0
    tooltip-text                        ""
  }
  pa_loc_sig
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pals"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_ventelyatory_kuzova
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pavk"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_radiostanciya
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.paradiostanciya"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_hs
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pahs"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_progektor
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.paprojector"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_hs1
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pahs1"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_upravlenie_holodilnikom
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pauh"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_kompressor
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pakompressor"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_hs3
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pahs3"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_disel
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.padisel"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_topnasos
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.patopnasos"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  pa_vozbuditel
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pavosbud"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              1
    tooltip-text                        ""
  }
  tum1
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tm1"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              0
    tooltip-text                        ""
  }
  tum2
  {
    mesh                                "tm_avtomata.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tm2"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          5
    radius                              0
    tooltip-text                        ""
  }
  bloc
  {
    kind                                "lever"
    mesh                                "rbl367.im"
    att                                 "a.rbl367"
    auto-create                         1
    mousespeed                          -2
    radius                              0.05
    limits                              0,1
    angles                              0,-3.1415
    notches                             0,1
    notchheight                         0,0
    tooltip-text                        ""
  }
  avstopdiselya
  {
    mesh                                "avstopdis.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.avstdiz"
    limits                              0,1
    angles                              0,-0.001
    mousespeed                          15
    tooltip-text                        ""
  }
  filtr
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs07"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  bditelnost
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.hs08"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  holostoy_hod1
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.holostoy_hod1"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  holostoy_hod2
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.holostoy_hod2"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  kontrol_sign
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.kontrol_sig"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  als_0
  {
    mesh                                "alsn_green.IM"
    att                                 "a.alsn"
    kind                                "light"
  }
  als_1
  {
    mesh                                "alsn_yellow.IM"
    att                                 "a.alsn"
    kind                                "light"
  }
  als_2
  {
    mesh                                "alsn_k-g.IM"
    att                                 "a.alsn"
    kind                                "light"
  }
  als_3
  {
    mesh                                "alsn_red.IM"
    att                                 "a.alsn"
    kind                                "light"
  }
  als_4
  {
    mesh                                "alsn_white.IM"
    att                                 "a.alsn"
    kind                                "light"
  }
  kmr
  {
    mesh                                "zap.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.kmr"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
    tooltip-text                        ""
  }
  fr_mehana
  {
    mesh                                "fortochka_mehana.im"
    kind                                "animated-lever"
    anim                                "fortochka_mehana.kin"
    auto-create                         1
    att-parent                          "default"
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    test-collisions                     1
    mousemode                           "1"
    mousespeed                          0.5
  }
  paravan_m
  {
    mesh                                "fortochka_paravan_mehana.im"
    auto-create                         1
    kind                                "lever"
    att-parent                          "fr_mehana"
    att                                 "a.fortm"
    angles                              0,-1.57
    notches                             0,1
    notchheight                         0,0
    test-collisions                     1
    mousemode                           "1"
    tooltip-text                        ""
  }
  fr_poma
  {
    mesh                                "fortochka_poma.im"
    kind                                "animated-lever"
    anim                                "fortochka_poma.kin"
    auto-create                         1
    att-parent                          "default"
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    test-collisions                     1
    mousemode                           "1"
    mousespeed                          0.5
  }
  paravan_p
  {
    mesh                                "fortochka_paravan_poma.im"
    auto-create                         1
    kind                                "lever"
    att-parent                          "fr_poma"
    att                                 "a.fortp"
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
    test-collisions                     1
    mousemode                           "1"
    tooltip-text                        ""
  }
  wipers_l_lvr
  {
    kind                                "lever"
    mesh                                "vkluchatel_dvornikov.im"
    auto-create                         1
    att                                 "a.dvornik_pomogaly"
    mousespeed                          0.3
    angles                              0,30
    limits                              0,1
    tooltip-text                        "Левый дворник"
  }
  wipers_r_lvr
  {
    kind                                "lever"
    mesh                                "vkluchatel_dvornikov.im"
    auto-create                         1
    att                                 "a.dvornik_mehana"
    mousespeed                          0.3
    angles                              0,30
    limits                              0,1
    tooltip-text                        "Правый дворник"
  }
  l_wiper
  {
    mesh                                "l_dvor.im"
    auto-create                         1
    att                                 "a.dvpom"
    att-parent                          "default"
    anim                                "l_dvor.kin"
  }
  r_wiper
  {
    mesh                                "r_dvor.im"
    auto-create                         1
    att                                 "a.dvpom01"
    att-parent                          "default"
    anim                                "r_dvor.kin"
  }
  tereze_bok_rain
  {
    mesh                                "okna_rain_bok.im"
    auto-create                         0
    att-parent                          "default"
  }
  tereze_rain_f_m
  {
    mesh                                "okna_rain_f_m.im"
    auto-create                         0
    att-parent                          "default"
  }
  tereze_rain_f_p
  {
    mesh                                "okna_rain_f_p.im"
    auto-create                         0
    att-parent                          "default"
  }
  tereze_rain_c_m
  {
    mesh                                "okna_rain_c_m.im"
    auto-create                         0
    att-parent                          "default"
  }
  tereze_rain_c_p
  {
    mesh                                "okna_rain_c_p.im"
    auto-create                         0
    att-parent                          "default"
  }
  pss1
  {
    kind                                "light"
    mesh                                "lampa_pss.im"
    att                                 "a.pss1"
    auto-create                         0
    att-parent                          "default"
  }
  pss2
  {
    kind                                "light"
    mesh                                "lampa_pss.im"
    att                                 "a.pss2"
    auto-create                         0
    att-parent                          "default"
  }
  tumbler_vkl_ukbm
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.ukbmvkl"
    limits                              0,2
    angles                              0,-0.5
    notches                             0,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  tumbler_proverka_ukbm
  {
    mesh                                "tumbler_big.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.ukbmtest"
    limits                              0,2
    angles                              0,-0.5
    notches                             0,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
    tooltip-text                        ""
  }
  propusk
  {
    kind                                "light"
    mesh                                "propusk.im"
    att                                 "a.propusk"
    auto-create                         0
    att-parent                          "default"
  }
  sl
  {
    kind                                "light"
    mesh                                "sl2m.im"
    auto-create                         0
    att-parent                          "default"
  }
  pisec_skor
  {
    mesh                                "pisec_skor.im"
    auto-create                         1
    att                                 "a.pisec"
    att-parent                          "default"
    anim                                "pisec_skor.kin"
  }
  podsvet_raciy
  {
    kind                                "light"
    mesh                                "podsvet_raciy.im"
    auto-create                         0
    att                                 "a.podsvetka_raciy"
    att-parent                          "default"
  }
  shtora1
  {
    kind                                "animated-lever"
    mesh                                "shtora1.IM"
    anim                                "shtora1.kin"
    att                                 "a.shtorka2"
    auto-create                         1
    mousespeed                          0.5
    limits                              0,1
    test-collisions                     0
    mousemode                           "1"
  }
  shtora2
  {
    kind                                "animated-lever"
    mesh                                "shtora2.IM"
    anim                                "shtora2.kin"
    att                                 "a.shtorka2"
    auto-create                         1
    mousespeed                          0.5
    limits                              0,1
    test-collisions                     0
    mousemode                           "1"
  }
  shtora1_collision
  {
    mesh                                "shtora1coll.im"
    auto-create                         1
    kind                                "collision-proxy"
    att-parent                          "shtora1"
    att                                 "a.st"
    collision-parent                    "shtora1"
    opacity                             1
  }
  shtora2_collision
  {
    mesh                                "shtora2coll.im"
    auto-create                         1
    kind                                "collision-proxy"
    att-parent                          "shtora2"
    att                                 "a.st2"
    collision-parent                    "shtora2"
    opacity                             1
  }
  tereze_rain_b_f_m
  {
    mesh                                "okno_mokroe_fort_m.im"
    auto-create                         0
    att                                 "a.mokr_m"
    att-parent                          "fr_mehana"
  }
  tereze_rain_b_f_p
  {
    mesh                                "okno_mokroe_fort_p.im"
    auto-create                         0
    att                                 "a.mokr_p"
    att-parent                          "fr_poma"
  }
  tereze_rain_paravan_m
  {
    mesh                                "okno_mokroe_paravan_m.im"
    auto-create                         0
    att                                 "a.rain_paravan_mehana"
    att-parent                          "paravan_m"
  }
  tereze_rain_paravan_p
  {
    mesh                                "okno_mokroe_paravan_p.im"
    auto-create                         0
    att                                 "a.rain_paravan_poma"
    att-parent                          "paravan_p"
  }
}
thumbnails
{
  0
  {
    image                               "interior_art/$screenshot$.jpg"
    width                               240
    height                              180
  }
}
kuid-table
{
  0                                     <kuid2:432925:100016:2>
}

Файлы:

2te116_interiora.im	2.7 MB
alsn_and_lamp_light.jpg	55.0 kB
alsn_and_lamp_light.texture.txt	42 B
alsn_green.im	3.9 kB
alsn_k-g.im	3.9 kB
alsn_red.im	3.9 kB
alsn_white.im	3.9 kB
alsn_yellow.im	3.9 kB
avstopdis.im	3.0 kB
cab2te116.gs	65 B
detali.jpg	899.9 kB
detali.texture.txt	29 B
dop.jpg	694.5 kB
dop.texture.txt	26 B
el_mano.jpg	255.1 kB
el_mano.texture.txt	30 B
epk_key.im	5.9 kB
fort.jpg	574.8 kB
fort.texture.txt	27 B
fortochka_mehana.im	17.3 kB
fortochka_mehana.kin	1.0 kB
fortochka_paravan_mehana.im	16.6 kB
fortochka_paravan_poma.im	14.1 kB
fortochka_poma.im	17.3 kB
fortochka_poma.kin	1.0 kB
interior_art
interior_art / $screenshot$.jpg	54.0 kB
kabina.jpg	796.8 kB
kabina.texture.txt	29 B
kn1.im	1.4 kB
kn2.im	1.4 kB
kn3.im	1.4 kB
kontr.im	27.8 kB
kresla.jpg	926.4 kB
kresla.texture.txt	29 B
lampa_pss.im	5.7 kB
lampa_red.im	2.9 kB
lampa_white.im	2.9 kB
l_dvor.im	11.5 kB
l_dvor.kin	3.2 kB
okna_rain_bok.im	1.9 kB
okna_rain_c_m.im	3.3 kB
okna_rain_c_p.im	3.3 kB
okna_rain_f_m.im	3.3 kB
okna_rain_f_p.im	3.3 kB
okno_mokroe_fort_m.im	836 B
okno_mokroe_fort_p.im	608 B
okno_mokroe_paravan_m.im	2.8 kB
okno_mokroe_paravan_p.im	2.8 kB
panelki_puta.jpg	1.2 MB
panelki_puta.texture.txt	35 B
pisec_skor.im	3.4 kB
pisec_skor.kin	10.8 kB
podsvet_raciy.im	9.3 kB
propusk.im	2.7 kB
pult_l_off.im	637.3 kB
pult_l_on_bright.im	637.3 kB
pult_l_on_dim.im	623.1 kB
pult_priborov.jpg	1.3 MB
pult_priborov.texture.txt	36 B
rb.im	2.8 kB
rbl367.im	1.9 kB
reversor.im	14.5 kB
rucka254.im	25.3 kB
rucka394.im	20.6 kB
rwipsw.im	1.5 kB
r_dvor.im	11.5 kB
r_dvor.kin	3.2 kB
shtora1.im	16.8 kB
shtora1.kin	2.8 kB
shtora1coll.im	432 B
shtora2.im	16.8 kB
shtora2.kin	2.8 kB
shtora2coll.im	432 B
sl2m.im	15.1 kB
sound
sound / 254_0.wav	158.1 kB
sound / avtomat.wav	16.7 kB
sound / cabin.txt	136 B
sound / km.wav	16.4 kB
sound / kran_0.wav	31.1 kB
sound / kran_00.wav	225.7 kB
sound / kran_1.wav	43.2 kB
sound / kran_20.wav	188.1 kB
sound / kran_3.wav	181.1 kB
sound / kran_4.wav	118.5 kB
sound / p1-p2_off.wav	96.5 kB
sound / p1-p2_on.wav	27.7 kB
sound / rb.wav	25.7 kB
sound / reverser.wav	12.0 kB
sound / reverser_netual.wav	46.6 kB
sound / reverser_work.wav	30.6 kB
sound / sand_p.wav	27.6 kB
sound / skorostemer.wav	294.1 kB
sound / stuk254.wav	10.4 kB
sound / stuk395.wav	6.9 kB
sound / tum.wav	5.8 kB
sound / tumb.wav	5.8 kB
speedo_needle.im	9.0 kB
stekla-stekla.texture.txt	47 B
stekla.tga	512.0 kB
steklo_clean-steklo_clean.texture.txt	59 B
steklo_clean.tga	512.0 kB
steklo_rain-steklo_rain.texture.txt	57 B
steklo_rain.tga	512.0 kB
steny.jpg	1.0 MB
steny.texture.txt	28 B
stol_i_pult.jpg	768.9 kB
stol_i_pult.texture.txt	34 B
strelka.im	8.4 kB
strelka_chasovaya.im	1.0 kB
strelka_kr.im	8.4 kB
strelka_minutnaya.im	2.3 kB
st_amp.im	1.1 kB
st_p_masla.im	582 B
st_temp_v.im	582 B
tifon.im	8.0 kB
tm_avtomata.im	4.6 kB
tumbler_big.im	9.9 kB
tumbler_m.im	4.7 kB
united_d.jpg	916.7 kB
united_d.texture.txt	31 B
united_krany.jpg	813.5 kB
united_krany.texture.txt	35 B
united_sl2m.jpg	978.4 kB
united_sl2m.texture.txt	34 B
united_sl2mon-united_sl2mon.texture.txt	61 B
united_sl2mon.tga	4.0 MB
un_d.jpg	1.2 MB
un_d.texture.txt	27 B
vkluchatel_dvornikov.im	1.5 kB
zap.im	1.4 kB
Общий объём файлов:	24.3 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:432925:127>	interior	Кабина 2ТЭ116-1685	3.4	19.04.2023 13:04:53	17.9 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid2:432925:100016:3>	#432925	library	Скрипты от 2ТЭ116	3.7	22.04.2023 22:12:53	73.3 kB
Всего связей: 1, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:78638:100048:1>	#78638	traincar	V 2TE116U-0380 A_v2	3.7	27.04.2023 20:42:45	12.9 MB
<kuid2:78638:100054:1>	#78638	traincar	V 2TE116U-0380 B_v2	3.7	27.04.2023 20:42:44	9.7 MB
<kuid:78638:100163>	#78638	traincar	V 2TE10M-2033 A	3.7	4.01.2016 21:02:37	7.6 MB
<kuid2:78638:100163:1>	#78638	traincar	V 2TE10M-2033 A_v2	3.7	18.10.2021 19:12:14	7.6 MB
<kuid:78638:100164>	#78638	traincar	V 2TE10M-2033 B	3.7	4.01.2016 21:02:37	7.7 MB
<kuid2:78638:100164:1>	#78638	traincar	V 2TE10M-2033 B_v2	3.7	4.11.2021 11:50:02	7.7 MB
<kuid:78638:100165>	#78638	traincar	V 2TE10M-1034 A	3.7	4.01.2016 19:47:18	9.9 MB
<kuid2:78638:100165:1>	#78638	traincar	V 2TE10M-1034 A_v2	3.7	12.01.2021 19:40:39	9.9 MB
<kuid:78638:100168>	#78638	traincar	V 2TE10M-1034 B	3.7	4.01.2016 19:47:18	10.0 MB
<kuid2:78638:100168:1>	#78638	traincar	V 2TE10M-1034 B_v2	3.7	18.10.2021 19:24:05	10.0 MB
<kuid:78638:100174>	#78638	traincar	V 2TE10U-0426	3.7	4.01.2016 21:48:18	6.4 MB
<kuid2:78638:100184:1>	#78638	traincar	V 2TE121-022 A	2.9	1.02.2015 18:16:37	31.9 MB
<kuid2:78638:100196:1>	#78638	traincar	V 2TE121-022 B	2.9	1.02.2015 18:16:40	31.9 MB
<kuid:78638:100352>	#78638	traincar	V 2TE116U-0062 B_v2	3.7	28.04.2023 11:34:20	12.8 MB
<kuid:78638:100353>	#78638	traincar	v 2TE116U-0331 A	3.7	2.08.2020 9:43:34	15.4 MB
<kuid:78638:100397>	#78638	traincar	v 2TE116U-0331 B	3.7	23.01.2021 12:34:09	15.4 MB
<kuid:78638:100398>	#78638	traincar	V 2TE116U-0062 A_v2	3.7	28.04.2023 11:34:20	12.8 MB
<kuid:78638:100427>	#78638	traincar	v 3TE116U-010 A	3.7	2.05.2023 16:23:39	15.0 MB
<kuid:78638:100428>	#78638	traincar	v 3TE116U-010 B	3.7	2.05.2023 16:23:39	15.0 MB
<kuid:78638:100462>	#78638	traincar	V 2TE116U-0045 A_v2	3.7	4.11.2021 11:50:56	12.8 MB
<kuid:78638:100463>	#78638	traincar	V 2TE116U-0045 B_v2	3.7	15.09.2023 10:57:24	12.8 MB
<kuid:78638:100464>	#78638	traincar	v 2TE116U-0246 A	3.7	23.07.2020 20:51:46	15.4 MB
<kuid:78638:100465>	#78638	traincar	v 2TE116U-0246 B	3.7	15.09.2023 4:53:55	15.4 MB
<kuid:78638:100466>	#78638	traincar	v 2TE116U-0310 A	3.7	19.04.2023 13:04:53	15.0 MB
<kuid:78638:100467>	#78638	traincar	v 2TE116U-0310 B	3.7	15.09.2023 4:53:55	15.0 MB
<kuid:78638:100470>	#78638	traincar	V 2TE116U-0011 A	3.7	15.09.2023 4:53:55	7.9 MB
<kuid:78638:100471>	#78638	traincar	V 2TE116U-0011 B	3.7	18.10.2021 19:16:27	8.1 MB
<kuid:78638:100472>	#78638	traincar	V 2TE116U-0026 A	3.7	18.10.2021 19:13:15	7.8 MB
<kuid:78638:100473>	#78638	traincar	V 2TE116U-0026 B	3.7	17.01.2021 0:39:29	7.9 MB
<kuid:78638:100500>	#78638	traincar	v 3TE116U-006 A	3.7	21.08.2016 23:26:59	14.8 MB
<kuid:78638:100503>	#78638	traincar	v 3TE116U-006 B	3.7	21.08.2016 23:26:59	14.9 MB
<kuid:78638:100512>	#78638	traincar	v 3TE116U-014 A	3.7	21.08.2016 23:26:59	14.8 MB
<kuid:78638:100513>	#78638	traincar	v 3TE116U-014 B	3.7	21.08.2016 23:26:59	14.8 MB
<kuid:78638:100684>	#78638	traincar	v 3TE10MK-1393B	3.6	6.01.2016 16:48:38	17.8 MB
<kuid:78638:100686>	#78638	traincar	v 3TE10MK-1393A	3.6	6.01.2016 16:48:38	17.8 MB
<kuid:78638:100698>	#78638	traincar	v 2TE116U-0199 B	3.6	27.09.2025 13:55:16	16.1 MB
<kuid2:78638:100698:1>	#78638	traincar	v 2TE116U-0199 B	3.7	17.01.2021 1:06:49	16.2 MB
<kuid:78638:100699>	#78638	traincar	v 2TE116U-0199 A	3.6	27.09.2025 13:55:14	16.1 MB
<kuid2:78638:100699:1>	#78638	traincar	v 2TE116U-0199 A	3.7	23.01.2021 12:34:18	16.1 MB
<kuid:78638:100753>	#78638	traincar	V 2TE10U-0211	3.7	4.01.2016 21:48:18	5.4 MB
<kuid:432925:1>	#432925	traincar	2ТЭ116-1685 А	3.3	25.06.2020 16:52:51	5.4 MB
<kuid:432925:2>	#432925	traincar	2ТЭ116-1685 Б	3.3	25.06.2020 16:53:03	5.4 MB
<kuid2:432925:5:4>	#432925	traincar	2ТЭ116-1701 А	3.4	26.04.2023 13:14:27	5.2 MB
<kuid2:432925:6:4>	#432925	traincar	2ТЭ116-1701 Б	3.4	26.04.2023 13:14:28	5.2 MB
<kuid2:760902:100019:2>	#760902	traincar	D3S 2ТЭ10М-0907 А	3.6	8.01.2017 14:01:00	7.8 MB
<kuid2:760902:100020:2>	#760902	traincar	D3S 2ТЭ10М-0907 Б	3.6	8.01.2017 14:01:01	7.8 MB
<kuid2:760902:100027:1>	#760902	traincar	D3S 2ТЭ116У-0040 А	3.6	1.02.2015 18:16:41	6.3 MB
<kuid2:760902:100028:1>	#760902	traincar	D3S 2ТЭ116У-0040 Б	3.6	1.02.2015 18:16:40	7.4 MB
<kuid2:760902:100031:1>	#760902	traincar	D3S 2ТЭ116У-0110 А	3.6	1.02.2015 18:16:40	7.1 MB
<kuid2:760902:100032:1>	#760902	traincar	D3S 2ТЭ116У-0110 Б	3.6	1.02.2015 18:16:40	7.1 MB
<kuid:771786:100527>	#771786	traincar	2ТЭ116-1447 A	3.7	18.10.2021 20:30:27	5.8 MB
<kuid:771786:100528>	#771786	traincar	2ТЭ116-1447 B	3.7	20.04.2021 20:16:49	5.8 MB
<kuid:818345:100001>	#818345	traincar	V 2TE116U-0044 A_v2	3.7	23.07.2020 21:05:39	13.1 MB
<kuid:818345:100002>	#818345	traincar	V 2TE116U-0044 B_v2	3.7	20.12.2020 10:16:29	13.1 MB