<kuid:404079:3933> VR FQX T1a 1969+

Тип: traincar
Опубликовано: 18.10.2021 18:14:15
Скачиваний: 65
Размер: 4.1 MB

Скачать

From 1969 the South Australian Railways, Victorian Railways and New South Wales Railways started construction on what was to be a standard container wagon to be bogie exchanged for broad and standard gauges for running between the states capital cities and to shipping ports such as Adelaide-Melbourne (BG), Adelaide-Perth (SG), Adelaide-Sydney (SG), Melbourne-Sydney (SG), Sydney-Perth via Port Pirie (SG), Sydney-Brisbane (SG). The South Australian Railways and the Victorian Railways coded their wagons FQX with South Australia being allocated numbers 1 to 500 however SAR only built 120 while Victoria took numbers 501 onwards and built upto 510 of them by 1980, New South Wales coded theirs OCX and built 90 taking numbers 14551 to 14640, from 1973 NSW started building OCY container wagons for Standard Gauge only traffic taking numbers 14901 to 15000 which where similar to the OCX with 100 built, this was extended to another 370 new OCY wagons built taking numbers 34301 to 35050 and numbers 150001 to 150070 having a total of 560 built by 1975, containers where loaded and unloaded at country towns by having a flat wagon on the end with some ramps for the forklifts without the need to left the containers and place them on the ground. The load limit of 75 Tons (76 tonnes) and axle load of 18 Tons (19 tonnes) is due to country lines still having 60lb/y and 75lb/y rails along with weakened timber bridges, in Victoria some lines required a few KQ and KMQ wagons placed between the FQX to spread the gross weight going over weakened timber bridges such as Bairnsdale to Orbost line.

This model represents the FQX as entered service in a clean wagon red livery from 1969 on Broad Gauge, Step's created by Zec.

Mass: 19 tons (empty) 75 tons (loaded)
Load Capacity: 55 tons, Two Loaded or Three Empty
Max Speed: 60mph
Axle Load: 18 tons
Brake Cylinder: (1) 12in x 12in Air slack Adjuster
Brake Ratio: 33.8% (Loaded) ~ 72.0% (Empty) Load Compensating

config.txt:

kuid                                    <kuid:404079:3933>
kind                                    "traincar"
category-class                          "XG"
category-region                         "AU"
category-era                            "1960s;1970s"
engine                                  0
mass                                    19407.402344
trainz-build                            4.2
username                                "VR FQX T1a 1969+"
enginespec                              <kuid2:404079:1081:2>
script                                  "wagon"
class                                   "wagon"
fonts                                   1
fonts-path                              "wagon"
max-coupler-gap                         0.014
description                             "From 1969 the South Australian Railways, Victorian Railways and New South Wales Railways started construction on what was to be a standard container wagon to be bogie exchanged for broad and standard gauges for running between the states capital cities and to shipping ports such as Adelaide-Melbourne (BG), Adelaide-Perth (SG), Adelaide-Sydney (SG), Melbourne-Sydney (SG), Sydney-Perth via Port Pirie (SG), Sydney-Brisbane (SG). The South Australian Railways and the Victorian Railways coded their wagons FQX with South Australia being allocated numbers 1 to 500 however SAR only built 120 while Victoria took numbers 501 onwards and built upto 510 of them by 1980, New South Wales coded theirs OCX and built 90 taking numbers 14551 to 14640, from 1973 NSW started building OCY container wagons for Standard Gauge only traffic taking numbers 14901 to 15000 which where similar to the OCX with 100 built, this was extended to another 370 new OCY wagons built taking numbers 34301 to 35050 and numbers 150001 to 150070 having a total of 560 built by 1975, containers where loaded and unloaded at country towns by having a flat wagon on the end with some ramps for the forklifts without the need to left the containers and place them on the ground. The load limit of 75 Tons (76 tonnes) and axle load of 18 Tons (19 tonnes) is due to country lines still having 60lb/y and 75lb/y rails along with weakened timber bridges, in Victoria some lines required a few KQ and KMQ wagons placed between the FQX to spread the gross weight going over weakened timber bridges such as Bairnsdale to Orbost line.


This model represents the FQX as entered service in a clean wagon red livery from 1969 on Broad Gauge, Step's created by Zec.


Mass: 19 tons (empty) 75 tons (loaded)
Load Capacity: 55 tons, Two Loaded or Three Empty
Max Speed: 60mph
Axle Load: 18 tons
Brake Cylinder: (1) 12in x 12in Air slack Adjuster
Brake Ratio: 33.8% (Loaded) ~ 72.0% (Empty) Load Compensating"
author                                  "Azervich"
contact-email                           "azervich@hotmail.com"
contact-website                         "http;//www.victrainz.com.au/forum"
license                                 "Victrainz Standard License."
mesh-table
{
  default
  {
    mesh                                "wagon/wagon.lm"
    auto-create                         1
  }
  load_compensating_lever
  {
    mesh                                "wagon/load-compensating-lever.lm"
    anim                                "wagon/load-compensating-lever.kin"
    auto-create                         1
    use-parent-bounds                   1
  }
  grade_control_lever
  {
    mesh                                "wagon/grade-control-lever.lm"
    anim                                "wagon/grade-control-lever.kin"
    auto-create                         1
    use-parent-bounds                   1
  }
  handbrake
  {
    mesh                                "wagon/handbrake.lm"
    anim                                "wagon/handbrake.kin"
    auto-create                         1
    use-parent-bounds                   1
  }
  stanchion_in
  {
    mesh                                "wagon/stanchion-in.lm"
    auto-create                         0
    use-parent-bounds                   1
  }
  stanchion_mid
  {
    mesh                                "wagon/stanchion-mid.lm"
    auto-create                         1
    use-parent-bounds                   1
  }
  stanchion_out
  {
    mesh                                "wagon/stanchion-out.lm"
    auto-create                         0
    use-parent-bounds                   1
  }
  bolsters
  {
    mesh                                "wagon/bolsters.lm"
    auto-create                         1
    use-parent-bounds                   1
  }
  bracket_20ft_front
  {
    mesh                                "wagon/bracket-20ft-front.lm"
    auto-create                         0
    use-parent-bounds                   1
  }
  bracket_20ft_center
  {
    mesh                                "wagon/bracket-20ft-center.lm"
    auto-create                         0
    use-parent-bounds                   1
  }
  bracket_20ft_back
  {
    mesh                                "wagon/bracket-20ft-back.lm"
    auto-create                         0
    use-parent-bounds                   1
  }
  bracket_40ft_front
  {
    mesh                                "wagon/bracket-40ft-front.lm"
    auto-create                         0
    use-parent-bounds                   1
  }
  couple_front
  {
    mesh-asset                          <kuid2:103475:60018:19>
    mesh                                "vr-auto-coupler-black.lm"
    anim                                "vr-auto-coupler-black.kin"
    att                                 "a.coup-f"
    auto-create                         1
  }
  couple_back
  {
    mesh-asset                          <kuid2:103475:60018:19>
    mesh                                "vr-auto-coupler-black.lm"
    anim                                "vr-auto-coupler-black.kin"
    att                                 "a.coup-r"
    auto-create                         1
  }
  hose_front
  {
    mesh-asset                          <kuid2:103475:60018:19>
    mesh                                "animated-brake-hose-left.lm"
    anim                                "animated-brake-hose-left.kin"
    att                                 "a.coup-f"
    auto-create                         1
  }
  hose_straight_front
  {
    mesh-asset                          <kuid2:103475:60018:19>
    mesh                                "animated-brake-hose-left-straight.lm"
    anim                                "animated-brake-hose-left-straight.kin"
    att                                 "a.coup-f"
    auto-create                         0
  }
  hose_back
  {
    mesh-asset                          <kuid2:103475:60018:19>
    mesh                                "animated-brake-hose-left.lm"
    anim                                "animated-brake-hose-left.kin"
    att                                 "a.coup-r"
    auto-create                         1
  }
  hose_straight_back
  {
    mesh-asset                          <kuid2:103475:60018:19>
    mesh                                "animated-brake-hose-left-straight.lm"
    anim                                "animated-brake-hose-left-straight.kin"
    att                                 "a.coup-r"
    auto-create                         0
  }
}
queues
{
  center_loads_1
  {
    size                                1
    initial-count                       0
    allowed-products
    {
      steel_i_beams_8_inch_x_20m_long   <kuid2:103919:80006:1>
      steel_pipes_01_15m                <kuid2:58223:41388:1>
    }
    attachment-points
    {
      0                                 "a.load0"
    }
    conflicts-with-queues
    {
      0                                 "center_loads_2"
      1                                 "3_containers_20ft"
      2                                 "container_front_40ft"
      3                                 "container_back_20ft"
    }
  }
  center_loads_2
  {
    size                                1
    initial-count                       0
    allowed-products
    {
      i-traeger_60_cm_18_m              <kuid:72730:61023>
      steel_pipes_03_15m                <kuid2:58223:41390:1>
      steel_pipes_04_15m                <kuid2:58223:41391:1>
    }
    attachment-points
    {
      0                                 "a.load0"
    }
    conflicts-with-queues
    {
      0                                 "center_loads_1"
      1                                 "3_containers_20ft"
      2                                 "container_front_40ft"
      3                                 "container_back_20ft"
    }
  }
  3_containers_20ft
  {
    size                                3
    initial-count                       0
    allowed-products
    {
      aus_20ft_container                <kuid:61119:35000>
      aus_20ft_container_empty          <kuid:61119:35001>
    }
    attachment-points
    {
      0                                 "a.container02"
      1                                 "a.container01"
      2                                 "a.container03"
    }
    conflicts-with-queues
    {
      0                                 "center_loads_1"
      1                                 "center_loads_2"
      2                                 "container_front_40ft"
      3                                 "container_back_20ft"
    }
  }
  container_front_40ft
  {
    size                                1
    initial-count                       0
    allowed-products
    {
      aus_40ft_container                <kuid:61119:35002>
      aus_40ft_container_empty          <kuid:61119:35003>
    }
    attachment-points
    {
      0                                 "a.container04"
    }
    conflicts-with-queues
    {
      0                                 "center_loads_1"
      1                                 "center_loads_2"
      2                                 "3_containers_20ft"
    }
  }
  container_back_20ft
  {
    size                                1
    initial-count                       0
    allowed-products
    {
      aus_20ft_container                <kuid:61119:35000>
      aus_20ft_container_empty          <kuid:61119:35001>
    }
    attachment-points
    {
      0                                 "a.container03"
    }
    conflicts-with-queues
    {
      0                                 "center_loads_1"
      1                                 "center_loads_2"
      2                                 "3_containers_20ft"
    }
  }
}
vehicle-running-numbers
{
  running-numbers                       "501-701"
}
extensions
{
  max_permitted_speed-60850             "60mph"
  active-coupling-standard-60850
  {
    version-major                       "2"
    version-minor                       "0"
    brakes                              "airbrake"
    front
    {
      coupler                           "knuckle"
      gangway                           "none"
      airbraketype                      "single"
      airbrakeside                      "left"
      vacbrake                          "none"
      multiple-working                  "none"
      heating-type                      "none"
      rch                               "none"
    }
    back
    {
      coupler                           "knuckle"
      gangway                           "none"
      airbraketype                      "single"
      airbrakeside                      "left"
      vacbrake                          "none"
      multiple-working                  "none"
      heating-type                      "none"
      rch                               "none"
    }
  }
}
bogeys
{
  0
  {
    bogey                               <kuid2:404079:3025:1>
    reversed                            0
    rotation-permitted                  1
    sideplay-permitted                  1
  }
  1
  {
    bogey                               <kuid2:404079:3026:1>
    reversed                            0
    rotation-permitted                  1
    sideplay-permitted                  1
  }
}
thumbnails
{
  preview
  {
    image                               "screenshot.jpg"
    width                               240
    height                              180
  }
  icon
  {
    image                               "icon.tga"
    width                               64
    height                              32
  }
}
kuid-table
{
  acslib                                <kuid2:60850:89100:5>
  enginespec                            <kuid2:404079:1081:2>
  couple_mesh                           <kuid2:103475:60018:19>
  steel_i_beams_8_inch_x_20m_long       <kuid2:103919:80006:1>
  i-traeger_60_cm_18_m                  <kuid:72730:61023>
  steel_pipes_01_15m                    <kuid2:58223:41388:1>
  steel_pipes_03_15m                    <kuid2:58223:41390:1>
  steel_pipes_04_15m                    <kuid2:58223:41391:1>
  aus_20ft_container                    <kuid:61119:35000>
  aus_20ft_container_empty              <kuid:61119:35001>
  aus_40ft_container                    <kuid:61119:35002>
  aus_40ft_container_empty              <kuid:61119:35003>
  vr_wgns_30b_front                     <kuid2:404079:3025:1>
  vr_wgns_30b_back                      <kuid2:404079:3026:1>
}

Файлы:

wagon
wagon / digit_4.texture.txt	51 B
wagon / digit_4.tga	48.0 kB
wagon / bolsters.lm.txt	185 B
wagon / digit_5.tga	48.0 kB
wagon / load-compensating-lever.im	20.5 kB
wagon / alpha.texture.txt	58 B
wagon / wagon.lm.txt	339 B
wagon / stanchion-out.lm.txt	190 B
wagon / alpha.tga	128.0 kB
wagon / bolsters-bolsters-env.texture.txt	57 B
wagon / wagon_lowest.im	2.1 kB
wagon / bolsters-normals.texture.txt	91 B
wagon / bolsters-normals.tga	192.0 kB
wagon / stanchion-out.im	19.6 kB
wagon / wagon_vlow.im	164.9 kB
wagon / bolsters-env.tga	192.0 kB
wagon / stanchion-mid.lm.txt	190 B
wagon / stanchion-in.im	14.6 kB
wagon / stanchion-in.lm.txt	189 B
wagon / stanchion-mid.im	14.6 kB
wagon / mesh-step-mesh-step-env.texture.txt	59 B
wagon / mesh-tris.im	378 B
wagon / mesh-step-normals.texture.txt	93 B
wagon / mesh-step-normals.tga	192.0 kB
wagon / wagon_low.im	345.1 kB
wagon / main-main-env.texture.txt	49 B
wagon / main-normals.texture.txt	83 B
wagon / mesh-step.tga	192.0 kB
wagon / load-compensating-lever.lm.txt	219 B
wagon / load-compensating-lever-tris.im	686 B
wagon / mesh-step-alpha.tga	192.0 kB
wagon / handbrake.lm.txt	191 B
wagon / groundplane.texture.txt	59 B
wagon / handbrake-tris.im	958 B
wagon / load-compensating-lever.kin	5.0 kB
wagon / handbrake.kin	10.5 kB
wagon / grade-control-lever.im	17.0 kB
wagon / handbrake.im	52.7 kB
wagon / groundplane-groundplane.texture.txt	59 B
wagon / groundplane.tga	128.0 kB
wagon / grade-control-lever.lm.txt	211 B
wagon / grade-control-lever-tris.im	506 B
wagon / digit_6.texture.txt	51 B
wagon / grade-control-lever.kin	2.3 kB
wagon / digit_5.texture.txt	51 B
wagon / bracket-40ft-front.lm.txt	195 B
wagon / digit_6.tga	48.0 kB
wagon / bracket-20ft-front.im	22.0 kB
wagon / bracket-20ft-center.lm.txt	196 B
wagon / bracket-20ft-front.lm.txt	195 B
wagon / bracket-20ft-back.lm.txt	194 B
wagon / bolsters.im	8.7 kB
wagon / bracket-40ft-front.im	24.2 kB
wagon / bracket-20ft-center.im	24.7 kB
wagon / bracket-20ft-back.im	22.3 kB
wagon / bolsters.tga	192.0 kB
wagon / mesh-step-spec.tga	192.0 kB
wagon / bolsters-spec.tga	192.0 kB
wagon / wagon_mid.im	922.1 kB
wagon / mesh-step-env.tga	192.0 kB
wagon / wagon_highest.im	1.4 MB
wagon / main-normals.tga	12.0 MB
wagon / main.tga	12.0 MB
wagon / main-spec.tga	12.0 MB
wagon / main-env.tga	12.0 MB
mass to kg.txt	357 B
icon.tga	6.0 kB
screenshot.jpg	46.7 kB
wagon_alpha_numbers
wagon_alpha_numbers / alphanumber_4.texture.txt	63 B
wagon_alpha_numbers / alphanumber_5.texture.txt	63 B
wagon_alpha_numbers / alphanumber_6.texture.txt	63 B
wagon_alpha_numbers / alphanumber_7.texture.txt	63 B
wagon_alpha_numbers / alphanumber_8.texture.txt	63 B
wagon_alpha_numbers / alphanumber_7.tga	16.0 kB
wagon_alpha_numbers / alphanumber_6.tga	16.0 kB
wagon_alpha_numbers / alphanumber_9.texture.txt	63 B
wagon_alpha_numbers / alphanumber_5.tga	16.0 kB
wagon_alpha_numbers / alphanumber_4.tga	16.0 kB
wagon_alpha_numbers / alphanumber_9.tga	16.0 kB
wagon_alpha_numbers / alphanumber_8.tga	16.0 kB
wagon_alpha_numbers / alphanumber_3.tga	16.0 kB
wagon_alpha_numbers / alphanumber_3.texture.txt	63 B
wagon_alpha_numbers / alphanumber_2.tga	16.0 kB
wagon_alpha_numbers / alphanumber_1.texture.txt	63 B
wagon_alpha_numbers / alphanumber_0.tga	16.0 kB
wagon_alpha_numbers / alphanumber_1.tga	16.0 kB
wagon_alpha_numbers / alphanumber_2.texture.txt	63 B
wagon_alpha_numbers / alphanumber_0.texture.txt	63 B
wagon.gs	26.1 kB
Общий объём файлов:	53.4 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:404079:3933>	traincar	VR FQX T1a 1969+	4.2	18.10.2021 18:14:15	4.1 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid2:58223:41388:1>	#58223	product	Steel Pipes 01 15m	2	16.07.2020 11:27:25	590.3 kB
<kuid2:58223:41390:1>	#58223	product	Steel Pipes 03 15m	2	17.01.2021 0:49:31	599.7 kB
<kuid2:58223:41391:1>	#58223	product	Steel Pipes 04 15m	2	13.07.2020 16:53:12	634.4 kB
<kuid2:60850:89100:11>	#60850	library	ACSlib	2.9	14.10.2020 19:54:33	27.2 kB
<kuid:61119:35000>	#61119	product	AUS 20ft Container	2	2.02.2015 22:32:45	2.8 MB
<kuid:61119:35001>	#61119	product	AUS 20ft Container Empty	2	27.12.2016 23:07:19	2.8 MB
<kuid:61119:35002>	#61119	product	AUS 40ft Container	2	2.02.2015 22:32:45	2.2 MB
<kuid:61119:35003>	#61119	product	AUS 40ft Container Empty	2	27.12.2016 23:07:19	2.2 MB
<kuid2:72730:61023:1>	#72730	product	I-Traeger 60 cm, 18 m	2	13.07.2020 16:50:35	328.7 kB
<kuid2:103475:60018:22>	#103475	mesh	VR Coupler Mesh Library	3.5	20.04.2023 14:27:03	3.6 MB
<kuid2:103919:80006:3>	#103919	product	Steel 'I' Beams - !8 inch x 20m long (load)	3.5	29.08.2023 14:47:48	638.9 kB
<kuid2:404079:1081:2>	#404079	engine	1960s 4 Axle Wagon E-spec - 2 - (TS09)	2.9	17.07.2020 9:21:17	74.2 kB
<kuid2:404079:3025:3>	#404079	bogey	VR WGNS 30B 50Ton C.S. Bogie - Red - Clean - Disc - 1	3.5	14.05.2023 22:18:51	1.5 MB
<kuid2:404079:3026:3>	#404079	bogey	VR WGNS 30B 50Ton C.S. Bogie - Red - Clean - Disc - 2	3.5	14.05.2023 22:18:51	1.5 MB
Всего связей: 14, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет