<kuid2:404079:3809:1> NRC RQTY t1e 1995+

Тип: traincar
Опубликовано: 14.05.2023 22:25:37
Скачиваний: 49
Размер: 5.0 MB

Скачать

From 1994 and 1995 National Rail Corporation recoded some ex-SAR AQCX/AQCY to RQCY with a few being repainted in NRC grey from 1995 while large numbers remained in either ANR Red or Green, some where also set aside and coded RQTY for tare weight reductions which didn't start until 1997.

This model represents the Type 1 RQTY number 120 painted in ANR Red from 1995 on Standard Gauge, Step's created by Zec.

Mass: 19.40 tonnes (empty) 76 tonnes (loaded)
Load Capacity: 56 tonnes, Two Loaded or Three Empty
Max Speed: 110 km/h
Axle Load: 19 tonnes
Brake Cylinder: (1) 305mm x 305mm Air slack Adjuster
Brake Ratio: 33.8% (Loaded) ~ 72.0% (Empty) Load Compensating

config.txt:

kuid                                    <kuid2:404079:3809:1>
kind                                    "traincar"
category-class                          "XG"
category-region                         "AU"
category-era                            "1990s"
engine                                  0
mass                                    19407.402344
trainz-build                            4.2
username                                "NRC RQTY t1e 1995+"
enginespec                              <kuid2:404079:1081:2>
script                                  "wagon"
class                                   "wagon"
max-coupler-gap                         0.014
description                             "From 1994 and 1995 National Rail Corporation recoded some ex-SAR AQCX/AQCY to RQCY with a few being repainted in NRC grey from 1995 while large numbers remained in either ANR Red or Green, some where also set aside and coded RQTY for tare weight reductions which didn't start until 1997.


This model represents the Type 1 RQTY number 120 painted in ANR Red from 1995 on Standard Gauge, Step's created by Zec.

Mass: 19.40 tonnes (empty) 76 tonnes (loaded)
Load Capacity: 56 tonnes, Two Loaded or Three Empty
Max Speed: 110 km/h
Axle Load: 19 tonnes
Brake Cylinder: (1) 305mm x 305mm Air slack Adjuster
Brake Ratio: 33.8% (Loaded) ~ 72.0% (Empty) Load Compensating"
author                                  "Azervich"
contact-email                           "azervich@hotmail.com"
contact-website                         "http;//www.victrainz.com.au/forum"
license                                 "Victrainz Standard License."
mesh-table
{
  default
  {
    mesh                                "wagon/wagon.lm"
    auto-create                         1
  }
  load_compensating_lever
  {
    mesh                                "wagon/load-compensating-lever.lm"
    anim                                "wagon/load-compensating-lever.kin"
    auto-create                         1
    use-parent-bounds                   1
  }
  grade_control_lever
  {
    mesh                                "wagon/grade-control-lever.lm"
    anim                                "wagon/grade-control-lever.kin"
    auto-create                         1
    use-parent-bounds                   1
  }
  handbrake
  {
    mesh                                "wagon/handbrake.lm"
    anim                                "wagon/handbrake.kin"
    auto-create                         1
    use-parent-bounds                   1
  }
  bracket_20ft_front
  {
    mesh                                "wagon/bracket-20ft-front.lm"
    auto-create                         1
    use-parent-bounds                   1
  }
  bracket_20ft_center
  {
    mesh                                "wagon/bracket-20ft-center.lm"
    auto-create                         1
    use-parent-bounds                   1
  }
  bracket_20ft_back
  {
    mesh                                "wagon/bracket-20ft-back.lm"
    auto-create                         1
    use-parent-bounds                   1
  }
  bracket_40ft_front
  {
    mesh                                "wagon/bracket-40ft-front.lm"
    auto-create                         0
    use-parent-bounds                   1
  }
  uncoupled_front
  {
    mesh-asset                          <kuid2:368725:17000:2>
    mesh                                "knuckle_idle.lm"
    att                                 "a.coup-f"
    position                            0,-0.051,0
    auto-create                         1
  }
  coupled_front
  {
    mesh-asset                          <kuid2:368725:17000:2>
    mesh                                "knuckle_coupled.lm"
    att                                 "a.coup-f"
    position                            0,-0.051,0
    auto-create                         0
  }
  uncoupled_back
  {
    mesh-asset                          <kuid2:368725:17000:2>
    mesh                                "knuckle_idle.lm"
    att                                 "a.coup-r"
    position                            0,-0.051,0
    auto-create                         1
  }
  coupled_back
  {
    mesh-asset                          <kuid2:368725:17000:2>
    mesh                                "knuckle_coupled.lm"
    att                                 "a.coup-r"
    position                            0,-0.051,0
    auto-create                         0
  }
  hose_front
  {
    mesh-asset                          <kuid2:103475:60018:19>
    mesh                                "animated-brake-hose-left.lm"
    anim                                "animated-brake-hose-left.kin"
    att                                 "a.coup-f"
    auto-create                         1
  }
  hose_straight_front
  {
    mesh-asset                          <kuid2:103475:60018:19>
    mesh                                "animated-brake-hose-left-straight.lm"
    anim                                "animated-brake-hose-left-straight.kin"
    att                                 "a.coup-f"
    auto-create                         0
  }
  hose_back
  {
    mesh-asset                          <kuid2:103475:60018:19>
    mesh                                "animated-brake-hose-left.lm"
    anim                                "animated-brake-hose-left.kin"
    att                                 "a.coup-r"
    auto-create                         1
  }
  hose_straight_back
  {
    mesh-asset                          <kuid2:103475:60018:19>
    mesh                                "animated-brake-hose-left-straight.lm"
    anim                                "animated-brake-hose-left-straight.kin"
    att                                 "a.coup-r"
    auto-create                         0
  }
}
queues
{
  3_containers_20ft
  {
    size                                3
    initial-count                       0
    allowed-products
    {
      aus_20ft_container                <kuid:61119:35000>
      aus_20ft_container_empty          <kuid:61119:35001>
      20ftx8ft-6in-hamburg-sud          <kuid2:174088:99077:2>
    }
    attachment-points
    {
      0                                 "a.container01"
      1                                 "a.container03"
      2                                 "a.container02"
    }
    conflicts-with-queues
    {
      0                                 "container_front_40ft"
      1                                 "container_back_20ft"
    }
  }
  container_front_40ft
  {
    size                                1
    initial-count                       0
    allowed-products
    {
      aus_40ft_container                <kuid:61119:35002>
      aus_40ft_container_empty          <kuid:61119:35003>
    }
    attachment-points
    {
      0                                 "a.container04"
    }
    conflicts-with-queues
    {
      0                                 "3_containers_20ft"
    }
  }
  container_back_20ft
  {
    size                                1
    initial-count                       0
    allowed-products
    {
      aus_20ft_container                <kuid:61119:35000>
      aus_20ft_container_empty          <kuid:61119:35001>
    }
    attachment-points
    {
      0                                 "a.container03"
    }
    conflicts-with-queues
    {
      0                                 "3_containers_20ft"
    }
  }
}
extensions
{
  max_permitted_speed-60850             "96kph"
  active-coupling-standard-60850
  {
    version-major                       "2"
    version-minor                       "0"
    brakes                              "airbrake"
    front
    {
      coupler                           "knuckle"
      gangway                           "none"
      airbraketype                      "single"
      airbrakeside                      "left"
      vacbrake                          "none"
      multiple-working                  "none"
      heating-type                      "none"
      rch                               "none"
    }
    back
    {
      coupler                           "knuckle"
      gangway                           "none"
      airbraketype                      "single"
      airbrakeside                      "left"
      vacbrake                          "none"
      multiple-working                  "none"
      heating-type                      "none"
      rch                               "none"
    }
  }
}
bogeys
{
  0
  {
    bogey                               <kuid2:404079:3099:1>
    reversed                            0
    rotation-permitted                  1
    sideplay-permitted                  1
  }
  1
  {
    bogey                               <kuid2:404079:3100:1>
    reversed                            0
    rotation-permitted                  1
    sideplay-permitted                  1
  }
}
thumbnails
{
  preview
  {
    image                               "screenshot.jpg"
    width                               240
    height                              180
  }
  icon
  {
    image                               "icon.tga"
    width                               64
    height                              32
  }
}
kuid-table
{
  acslib                                <kuid2:60850:89100:5>
  enginespec                            <kuid2:404079:1081:2>
  knuckle-mesh                          <kuid2:368725:17000:2>
  couple-mesh                           <kuid2:103475:60018:19>
  aus_20ft_container                    <kuid:61119:35000>
  aus_20ft_container_empty              <kuid:61119:35001>
  aus_40ft_container                    <kuid:61119:35002>
  aus_40ft_container_empty              <kuid:61119:35003>
  nswr_2cl_front                        <kuid2:404079:3099:1>
  nswr_2cl_back                         <kuid2:404079:3100:1>
  0                                     <kuid2:174088:99077:2>
}

Файлы:

mass to kg.txt	357 B
screenshot.jpg	47.0 kB
icon.tga	6.0 kB
wagon.gs	24.4 kB
wagon
wagon / alpha.texture.txt	58 B
wagon / bracket-20ft-center.lm.txt	196 B
wagon / bracket-20ft-back.lm.txt	194 B
wagon / bracket-40ft-front.lm.txt	195 B
wagon / bracket-20ft-front.lm.txt	195 B
wagon / grade-control-lever-tris.im	506 B
wagon / grade-control-lever.im	17.0 kB
wagon / bracket-20ft-center.im	25.3 kB
wagon / bracket-40ft-front.im	24.9 kB
wagon / grade-control-lever.lm.txt	211 B
wagon / grade-control-lever.kin	2.3 kB
wagon / handbrake.lm.txt	191 B
wagon / load-compensating-lever-tris.im	686 B
wagon / bracket-20ft-back.im	26.0 kB
wagon / load-compensating-lever.lm.txt	219 B
wagon / handbrake-tris.im	10.9 kB
wagon / bracket-20ft-front.im	24.9 kB
wagon / load-compensating-lever.kin	5.0 kB
wagon / main-main-env.texture.txt	49 B
wagon / handbrake.kin	10.5 kB
wagon / load-compensating-lever.im	20.5 kB
wagon / main-normals.texture.txt	83 B
wagon / handbrake.im	107.1 kB
wagon / mesh-step-mesh-step-env.texture.txt	59 B
wagon / alpha.tga	128.0 kB
wagon / mesh-step-normals.texture.txt	93 B
wagon / mesh-step-normals.tga	192.0 kB
wagon / mesh-tris.im	378 B
wagon / mesh-step.tga	192.0 kB
wagon / mesh-step-alpha.tga	192.0 kB
wagon / wagon.lm.txt	291 B
wagon / wagon_lowest.im	1.9 kB
wagon / mesh-step-spec.tga	192.0 kB
wagon / mesh-step-env.tga	192.0 kB
wagon / wagon_low.im	667.2 kB
wagon / main-normals.tga	12.0 MB
wagon / wagon_highest.im	1.9 MB
wagon / wagon_mid.im	1.6 MB
wagon / main.tga	12.0 MB
wagon / main-spec.tga	12.0 MB
wagon / main-env.tga	12.0 MB
Общий объём файлов:	53.6 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:404079:3809:1>	traincar	NRC RQTY t1e 1995+	4.2	14.05.2023 22:25:37	5.0 MB
<kuid:404079:3809>	traincar	NRC RQTY T1e 1995+	4.2	20.04.2021 20:19:15	6.0 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid2:60850:89100:11>	#60850	library	ACSlib	2.9	14.10.2020 19:54:33	27.2 kB
<kuid:61119:35000>	#61119	product	AUS 20ft Container	2	2.02.2015 22:32:45	2.8 MB
<kuid:61119:35001>	#61119	product	AUS 20ft Container Empty	2	27.12.2016 23:07:19	2.8 MB
<kuid:61119:35002>	#61119	product	AUS 40ft Container	2	2.02.2015 22:32:45	2.2 MB
<kuid:61119:35003>	#61119	product	AUS 40ft Container Empty	2	27.12.2016 23:07:19	2.2 MB
<kuid2:103475:60018:22>	#103475	mesh	VR Coupler Mesh Library	3.5	20.04.2023 14:27:03	3.6 MB
<kuid2:174088:99077:2>	#174088	product	20ft x 8ft-6in Hamburg sud container	3.5	2.08.2020 9:44:41	358.0 kB
<kuid2:368725:17000:4>	#368725	mesh	Mesh library of NSWGR buffers, couplers and hoses	4.2	26.08.2024 18:31:14	2.3 MB
<kuid2:404079:1081:2>	#404079	engine	1960s 4 Axle Wagon E-spec - 2 - (TS09)	2.9	17.07.2020 9:21:17	74.2 kB
<kuid2:404079:3099:2>	#404079	bogey	NSWR 2CL 50Ton C.S. Bogie - Black - Dirty - Disc - 1	3.5	14.05.2023 22:19:06	2.1 MB
<kuid2:404079:3100:2>	#404079	bogey	NSWR 2CL 50Ton C.S. Bogie - Black - Dirty - Disc - 2	3.5	14.05.2023 22:19:06	2.1 MB
Всего связей: 11, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:92924:101459:1>	#92924	profile	01 90s Freight to Donnybrook	5	21.01.2024 21:56:03	759.2 kB
<kuid:92924:101489>	#92924	profile	00 Base Session with trains	5	21.01.2024 21:56:03	174.6 kB