<kuid2:404079:2753:1> VR ESX t2c 1971+

Тип: traincar
Опубликовано: 14.05.2023 22:18:51
Скачиваний: 13
Размер: 5.9 MB

Скачать

The Victorian Railways ESX Wagons where built at Ballarrat Workshops from July 1964 to July 1965 and Newport Workshops from April to August 1965, a total of 26 where built, these wagons where built for bogie exchange Steel traffic between Vic, NSW, SA and WA, this rarely happened and instead these wagons mostly stayed on the Broad Gauge and would get loads swapped between other wagons. they where put into Pipe and Swan Timber traffic and where thrown all over Victoria. In 1971 they where modified with longer draw gear and coupler shanks, ESX 15 had C channels welded on the tops to extend the height of the Stanchions for Pipe traffic.

This Model represents ESX 15 on Broad Gauge in modified condition from Spetember and October 1971, Step's created by Zec.

Mass: 21-5-0-7 (empty) 71-5-0-7 (loaded)
Load Capacity: 50 Tons Distributed
Max Speed: 60mph
Axle Load: 17-16-0-30
Brake Cylinder: (1) 12in x 12in Air slack Adjuster
Brake Ratio: 34.9% (Loaded) ~ 63.4% (Empty) Load Compensating

config.txt:

kuid                                    <kuid2:404079:2753:1>
kind                                    "traincar"
category-class                          "XG"
category-region                         "AU"
category-era                            "1970s"
engine                                  0
mass                                    21594.171875
trainz-build                            3.5
username                                "VR ESX t2c 1971+"
enginespec                              <kuid2:404079:1081:2>
script                                  "wagon"
class                                   "wagon"
max-coupler-gap                         0.014
description                             "The Victorian Railways ESX Wagons where built at Ballarrat Workshops from July 1964 to July 1965 and Newport Workshops from April to August 1965, a total of 26 where built, these wagons where built for bogie exchange Steel traffic between Vic, NSW, SA and WA, this rarely happened and instead these wagons mostly stayed on the Broad Gauge and would get loads swapped between other wagons. they where put into Pipe and Swan Timber traffic and where thrown all over Victoria. In 1971 they where modified with longer draw gear and coupler shanks, ESX 15 had C channels welded on the tops to extend the height of the Stanchions for Pipe traffic.

This Model represents ESX 15 on Broad Gauge in modified condition from Spetember and October 1971, Step's created by Zec.

Mass: 21-5-0-7 (empty) 71-5-0-7 (loaded)
Load Capacity: 50 Tons Distributed
Max Speed: 60mph
Axle Load: 17-16-0-30
Brake Cylinder: (1) 12in x 12in Air slack Adjuster
Brake Ratio: 34.9% (Loaded) ~ 63.4% (Empty) Load Compensating"
author                                  "Azervich"
contact-email                           "azervich@hotmail.com"
contact-website                         "http;//www.victrainz.com.au/forum"
license                                 "Victrainz Standard License."
mesh-table
{
  default
  {
    mesh                                "wagon/wagon.lm"
    auto-create                         1
  }
  grade_control_lever
  {
    mesh                                "wagon/grade-control-lever.lm"
    anim                                "wagon/grade-control-lever.kin"
    auto-create                         1
  }
  load_compensating_lever
  {
    mesh                                "wagon/load-compensating-lever.lm"
    anim                                "wagon/load-compensating-lever.kin"
    auto-create                         1
  }
  couple_front
  {
    mesh-asset                          <kuid2:103475:60018:21>
    mesh                                "vr-auto-coupler-black.lm"
    anim                                "vr-auto-coupler-black.kin"
    att                                 "a.coup-f"
    auto-create                         1
  }
  couple_back
  {
    mesh-asset                          <kuid2:103475:60018:21>
    mesh                                "vr-auto-coupler-black.lm"
    anim                                "vr-auto-coupler-black.kin"
    att                                 "a.coup-r"
    auto-create                         1
  }
  hose_front
  {
    mesh-asset                          <kuid2:103475:60018:21>
    mesh                                "animated-brake-hose-left.lm"
    anim                                "animated-brake-hose-left.kin"
    att                                 "a.coup-f"
    auto-create                         1
  }
  hose_straight_front
  {
    mesh-asset                          <kuid2:103475:60018:21>
    mesh                                "animated-brake-hose-left-straight.lm"
    anim                                "animated-brake-hose-left-straight.kin"
    att                                 "a.coup-f"
    auto-create                         0
  }
  hose_back
  {
    mesh-asset                          <kuid2:103475:60018:21>
    mesh                                "animated-brake-hose-left.lm"
    anim                                "animated-brake-hose-left.kin"
    att                                 "a.coup-r"
    auto-create                         1
  }
  hose_straight_back
  {
    mesh-asset                          <kuid2:103475:60018:21>
    mesh                                "animated-brake-hose-left-straight.lm"
    anim                                "animated-brake-hose-left-straight.kin"
    att                                 "a.coup-r"
    auto-create                         0
  }
  shadow
  {
    mesh                                "shadow/shadow.lm"
    auto-create                         0
  }
}
queues
{
  end_loads
  {
    size                                2
    initial-count                       0
    allowed-products
    {
      it_wood_load                      <kuid2:88211:60000:1>
    }
    attachment-points
    {
      0                                 "a.front_load"
      1                                 "a.back_load"
    }
    conflicts-with-queues
    {
      0                                 "center_loads"
      1                                 "pipe_loads"
    }
  }
  center_loads
  {
    size                                1
    initial-count                       0
    allowed-products
    {
      pipe_1.7x9.5m                     <kuid:404079:43>
      i-traeger_60_cm_12_m              <kuid2:72730:61016:1>
    }
    attachment-points
    {
      0                                 "a.center_load"
    }
    conflicts-with-queues
    {
      0                                 "end_loads"
      1                                 "pipe_loads"
    }
  }
  pipe_loads
  {
    size                                4
    initial-count                       0
    allowed-products
    {
      2_foot_pipe                       <kuid2:44988:80013:1>
    }
    attachment-points
    {
      0                                 "a.pipe_01"
      1                                 "a.pipe_02"
      2                                 "a.pipe_03"
      3                                 "a.pipe_04"
    }
    conflicts-with-queues
    {
      0                                 "end_loads"
      1                                 "center_loads"
    }
  }
}
extensions
{
  max_permitted_speed-60850             "60mph"
  active-coupling-standard-60850
  {
    version-major                       "2"
    version-minor                       "0"
    brakes                              "airbrake"
    front
    {
      coupler                           "knuckle"
      gangway                           "none"
      airbraketype                      "single"
      airbrakeside                      "left"
      vacbrake                          "none"
      multiple-working                  "none"
      heating-type                      "none"
      rch                               "none"
    }
    back
    {
      coupler                           "knuckle"
      gangway                           "none"
      airbraketype                      "single"
      airbrakeside                      "left"
      vacbrake                          "none"
      multiple-working                  "none"
      heating-type                      "none"
      rch                               "none"
    }
  }
}
bogeys
{
  0
  {
    bogey                               <kuid:404079:3101>
    reversed                            0
    rotation-permitted                  1
    sideplay-permitted                  1
  }
  1
  {
    bogey                               <kuid:404079:3102>
    reversed                            0
    rotation-permitted                  1
    sideplay-permitted                  1
  }
}
thumbnails
{
  preview
  {
    image                               "screenshot.jpg"
    width                               240
    height                              180
  }
  icon
  {
    image                               "icon.tga"
    width                               64
    height                              32
  }
}
kuid-table
{
  acslib                                <kuid2:60850:89100:5>
  enginespec                            <kuid2:404079:1081:2>
  couple_mesh                           <kuid2:103475:60018:21>
  it_wood_load                          <kuid2:88211:60000:1>
  pipe_1.7x9.5m                         <kuid:404079:43>
  i-traeger_60_cm_12_m                  <kuid2:72730:61016:1>
  2_foot_pipe                           <kuid2:44988:80013:1>
  vr_elf_30_front                       <kuid:404079:3101>
  vr_elf_30_back                        <kuid:404079:3102>
}

Файлы:

shadow
shadow / shadow.im	83.8 kB
shadow / shadow.lm.txt	136 B
wagon
wagon / alpha-alpha.texture.txt	60 B
wagon / grade-control-lever.lm.txt	211 B
wagon / grade-control-lever.kin	2.3 kB
wagon / load-compensating-lever-tris.im	778 B
wagon / load-compensating-lever.lm.txt	219 B
wagon / load-compensating-lever.kin	4.1 kB
wagon / grade-control-lever.im	17.0 kB
wagon / main-main-env.texture.txt	49 B
wagon / main-normals.texture.txt	83 B
wagon / load-compensating-lever.im	20.4 kB
wagon / mesh-step-mesh-step-env.texture.txt	59 B
wagon / mesh-step-normals.texture.txt	93 B
wagon / mesh-step-normals.tga	192.0 kB
wagon / wagon.lm.txt	291 B
wagon / grade-control-lever-tris.im	658 B
wagon / alpha.tga	128.0 kB
wagon / wagon_lowest.im	2.8 kB
wagon / mesh-step.tga	192.0 kB
wagon / mesh-step-spec.tga	192.0 kB
wagon / wagon_low.im	307.0 kB
wagon / mesh-step-env.tga	192.0 kB
wagon / wagon_mid.im	975.2 kB
wagon / wagon_highest.im	1.2 MB
wagon / main-normals.tga	12.0 MB
wagon / main.tga	12.0 MB
wagon / main-spec.tga	12.0 MB
wagon / main-env.tga	12.0 MB
icon.tga	6.0 kB
wagon.gs	22.4 kB
screenshot.jpg	41.8 kB
mass to kg.txt	349 B
Общий объём файлов:	51.6 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:404079:2753:1>	traincar	VR ESX t2c 1971+	3.5	14.05.2023 22:18:51	5.9 MB
<kuid:404079:2753>	traincar	VR ESX T2c - 1971+	3.5	2.08.2020 17:38:55	6.1 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid2:44988:80013:1>	#44988	product	2ft Pipe	2	13.06.2020 19:04:27	111.1 kB
<kuid2:60850:89100:11>	#60850	library	ACSlib	2.9	14.10.2020 19:54:33	27.2 kB
<kuid2:72730:61016:1>	#72730	product	I-Traeger 60 cm, 12 m	2	19.04.2023 13:04:51	248.1 kB
<kuid2:88211:60000:1>	#88211	product	IT wood load	2.4	18.04.2023 10:43:31	164.2 kB
<kuid2:103475:60018:22>	#103475	mesh	VR Coupler Mesh Library	3.5	20.04.2023 14:27:03	3.6 MB
<kuid:404079:43>	#404079	product	VR Load - Pipe 1.7x9.5m	3.5	14.07.2020 9:01:27	817.8 kB
<kuid2:404079:1081:2>	#404079	engine	1960s 4 Axle Wagon E-spec - 2 - (TS09)	2.9	17.07.2020 9:21:17	74.2 kB
<kuid2:404079:3101:1>	#404079	bogey	VR ELF 30 50Ton C.S. Bogie - Red - Dirty - Disc - 1	3.5	14.05.2023 22:18:51	2.5 MB
<kuid2:404079:3102:1>	#404079	bogey	VR ELF 30 50Ton C.S. Bogie - Red - Dirty - Disc - 2	3.5	14.05.2023 22:18:51	2.4 MB
Всего связей: 9, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет