<kuid:404079:1087> 1960s 4 Axle Wagon E-spec - 4 - (TS09)

Тип: Параметры двигателя
Опубликовано: 23.07.2020 19:18:57
Скачиваний: 23
Размер: 45.6 kB

Скачать

Victorian Railways Physic for Roller Bearing Wagon Stock.

Used on Wagons built between 1920 through to 1941 after the 1962-1966 overhauls into bogie ex-changeable stock for BG and SG use to carry Special Goods and General Goods (2 Axle Roller Bearing Bogie's).

Also best on 19-23ton Cars Unloaded Tare Weight and upto 65tons loaded, anything lighter or heavier makes it handle different, the physic has been set up with Grade Control so the brake cylinders vent at a very slow rate, the brake ratio is also based on Load Compensating System which means the values are set for a fully loaded wagon's max braking effort, only issue is unloaded wagons will brake too hard, The Load Compensating Lever reduces the max brake cylinder pressure to 27PSI for unloaded wagons while loaded wagons get the full 50 PSI pressure, hopefully one day N3V puts a brake cylinder efficiency tag in the scripts so we can control it for loaded or unloaded wagons.

Brake Pipe: 72PSI Max
Brake Cylinders: (1x) 10in x 12in 50 PSI Max
Brake Ratio: 35.3% - 60.0%

config.txt:

kuid                                    <kuid:404079:1087>
kind                                    "engine"
category-class                          "ZE"
category-region                         "AU"
category-era                            "1960s;1970s;1980s;1990s;2000s;2010s;2020s"
trainz-build                            2.9
username                                "1960s 4 Axle Wagon E-spec - 4 - (TS09)"
description                             "Victorian Railways Physic for Roller Bearing Wagon Stock.

Used on Wagons built between 1920 through to 1941 after the 1962-1966 overhauls into bogie ex-changeable stock for BG and SG use to carry Special Goods and General Goods (2 Axle Roller Bearing Bogie's). 

Also best on 19-23ton Cars Unloaded Tare Weight and upto 65tons loaded, anything lighter or heavier makes it handle different, the physic has been set up with Grade Control so the brake cylinders vent at a very slow rate, the brake ratio is also based on Load Compensating System which means the values are set for a fully loaded wagon's max braking effort, only issue is unloaded wagons will brake too hard, The Load Compensating Lever reduces the max brake cylinder pressure to 27PSI for unloaded wagons while loaded wagons get the full 50 PSI pressure, hopefully one day N3V puts a brake cylinder efficiency tag in the scripts so we can control it for loaded or unloaded wagons.

Brake Pipe: 72PSI Max
Brake Cylinders: (1x) 10in x 12in 50 PSI Max
Brake Ratio: 35.3% - 60.0%"
author                                  "Azervich"
contact-email                           "azervich@hotmail.com"
contact-website                         "http://www.victrainz.com.au/forum"
license                                 "Feel free to edit this."
flowsize
{
  trainbrakepipe                        1000
  epreservoirpipe                       0
  no3pipe                               0
  no4pipe                               0
  auxreservoirvent                      0.19
  auxreservoir_no3                      0
  auxreservoir_trainbrakepipe           0.04
  autobrakecylindervent                 0.005
  auxreservoir_autobrakecylinder        0.16
  equaliser_mainreservoir               0
  equaliservent                         0
  equaliserventhandleoff                0
  equaliserventemergency                0
  no3pipevent                           0
  no3pipe_mainreservoir                 0
  compressor                            0
  trainbrakepipe_reservoir              0
  trainbrakepipevent                    0.1
  no3pipe_autobrakecylinder             0
  epreservoirpipe_autobrakecylinder     0
  mainreservoir_ep                      0
  vacuumbrakepipe                       0
  vacuumbrakepipereleasevent            0
  vacuumbrakepipevent                   0
  vacuumbrakereservoir_vacuumbrakepipe  0
  vacuumbrakecylinder_vacuumbrakepipe   0
  highspeedexhauster_vacuumbrakepipe    0
}
volume
{
  scale                                 1
  trainbrakepipe                        0.2
  epreservoirpipe                       0
  no3pipe                               0
  no4pipe                               0
  auxreservoir                          0.016088
  autobrakecylinder                     0.006435
  vacuumbrakepipe                       0
  vacuumbrakereservoir                  0
  vacuumbrakecylinder                   0
  mainreservoir                         0
  equaliser                             0
  independantbrakecylinder              0
}
pressure
{
  scale                                 1
  compressor                            0
  mainreservoir                         0
  highspeedexhauster                    0
  brakepipe                             0.006127
  brakeinitial                          0
  brakefull                             0
  indbrakefull                          0
  trainbrakepipe_start                  0
  epreservoirpipe_start                 0
  no3pipe_start                         0
  no4pipe_start                         0
  auxreservoir_start                    0
  autobrakecylinder_start               0
  vacuumbrakepipe_start                 0
  vacuumbrakereservoir_start            0
  vacuumbrakecylinder_start             0
  mainreservoir_start                   0
  equaliser_start                       0
  independantbrakecylinder_start        0
}
mass
{
  scale                                 1
  fuel                                  "0"
}
motor
{
  resistance                            0
  adhesion                              0
  maxvoltage                            0
  brakeratio                            23413.199219
  maxspeed                              0
  max-accel                             0
  max-decel                             0
  axle-count                            4
  surface-area                          83
  moving-friction-coefficient           0.01413
  air-drag-coefficient                  0.00094
  throttle-notches                      0
}
thumbnails
{
  0
  {
    image                               "screenshot.jpg"
    width                               240
    height                              180
  }
}
kuid-table
{
}

Файлы:

screenshot.jpg	47.0 kB
Общий объём файлов:	47.0 kB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:404079:1087>	engine	1960s 4 Axle Wagon E-spec - 4 - (TS09)	2.9	23.07.2020 19:18:57	45.6 kB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:404079:2372>	#404079	traincar	VR SX Flat T1a - 1974+	3.6	12.01.2021 22:54:22	3.4 MB
<kuid:404079:2373>	#404079	traincar	VR SX T1a SG - 1974+	3.5	23.01.2021 12:47:55	3.4 MB
<kuid:404079:2374>	#404079	traincar	VR SX Flat T1b - 1974+	3.6	12.01.2021 18:54:29	3.3 MB
<kuid:404079:2375>	#404079	traincar	VR SX T1b SG - 1974+	3.6	23.01.2021 12:48:58	3.3 MB
<kuid:404079:2376>	#404079	traincar	VR SX Flat T2 - 1976+	3.6	18.10.2021 20:07:16	3.3 MB
<kuid:404079:2377>	#404079	traincar	VR SX T2 SG - 1976+	3.6	12.01.2021 19:34:18	3.3 MB
<kuid:404079:2378>	#404079	traincar	VR SX Flat T1a - 1978+	3.6	18.10.2021 20:13:59	3.7 MB
<kuid:404079:2379>	#404079	traincar	VR SX Flat T1b - 1978+	3.6	18.10.2021 18:03:08	3.7 MB
<kuid:404079:2380>	#404079	traincar	VR SX Flat T1c - 1978+	3.6	2.08.2020 9:41:36	3.5 MB
<kuid:404079:2381>	#404079	traincar	VR SX Flat T2 - 1979+	3.6	12.01.2021 19:16:30	3.4 MB
<kuid:404079:2382>	#404079	traincar	VR SX T2 SG - 1979+	3.6	20.10.2021 1:40:48	3.4 MB
<kuid:404079:2387>	#404079	traincar	VL VFEX 1 - 1983+	3.6	12.01.2021 19:40:53	6.9 MB