<kuid2:368725:90065:4> NSWGR ball lever to switch yard points, mount right, default right, for avatar operation

Тип: Стрелка
Опубликовано: 6.06.2024 16:19:57
Скачиваний: 17
Размер: 1.2 MB

Скачать

A ball lever that is weighted to return to a default switch direction unless held in the other direction by an operator.
When used with junctions formed with tracks from the series sourced from <kuid2:368725:49000:7> 'Protrack NSWGR Mesh Library', this asset mates with the switching mechanism when it is mounted to the right of a junction that is switched right by default.
The lever is normally operated by a safe-working officer (SWO) avatar (see the 'SWO Controller Rule' <kuid:368725:60021>). When the relevant avatar is active in the yard in which this control is placed, AI drivers cannot control the junction. When the avatar leaves the trigger area of this junction it will return to its default state.
A naming convention is required so that each junction in a yard is linked to the yard's avatar. If the avatar location code is <location code> then the ground point lever must be named <location code>_TPL_<sequence>, where <sequence> is a lever sequence alphanumeric. For example, if the avatar location code is 'CNJ' then a valid point lever code is 'CNJ_TPL_04'.

config.txt:

kuid                                    <kuid2:368725:90065:4>
kind                                    "mojunction"
trainz-build                            4.2
username                                "NSWGR ball lever to switch yard points, mount right, default right, for avatar operation"
description                             "A ball lever that is weighted to return to a default switch direction unless held in the other direction by an operator. 
When used with junctions formed with tracks from the series sourced from <kuid2:368725:49000:7> 'Protrack NSWGR Mesh Library', this asset mates with the switching mechanism when it is mounted to the right of a junction that is switched right by default.
The lever is normally operated by a safe-working officer (SWO) avatar (see the 'SWO Controller Rule' <kuid:368725:60021>). When the relevant avatar is active in the yard in which this control is placed, AI drivers cannot control the junction. When the avatar leaves the trigger area of this junction it will return to its default state.
A naming convention is required so that each junction in a yard is linked to the yard's avatar. If the avatar location code is <location code> then the ground point lever must be named <location code>_TPL_<sequence>, where <sequence> is a lever sequence alphanumeric. For example, if the avatar location code is 'CNJ' then a valid point lever code is 'CNJ_TPL_04'."
category-era                            "1870s;1980s"
category-region                         "AU"
category-class                          "WX"
trackside                               2
script                                  "junctionlever_yard_v5"
class                                   "pointlever"
mesh-table
{
  mode0
  {
    mesh                                "lever1.lm"
    auto-create                         0
  }
  mode1
  {
    mesh                                "lever2.lm"
    auto-create                         1
  }
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
string-table
{
  prompt_nonamecheck                    "Bypass checks for a valid AI-control username?"
  result_ncboolean0                     "NO"
  result_ncboolean1                     "YES"
  dialog-caption-triggers               "Select Equipment Location Trigger [ELT]:"
  pe-prompt-click-to-enter-data         "Click to enter data"
  pe-prompt-click-to-reenter            "Click to re-enter data"
  pe-prompt-getmyelt                    "Equipment Location Trigger [ELT]:"
  close                                 "Close"
  tpl_normal                            "Normal"
  tpl_off_normal                        "Off Normal"
}
obsolete-table
{
}
kuid-table
{
  0                                     <kuid:-25:893>
}

Файлы:

images
images / close.jpg	844 B
images / tpl_n.jpg	1.1 kB
images / tpl_on.jpg	1.0 kB
ball lever-ball lever.texture.txt	55 B
ball lever_normal-ball lever_normal.texture.txt	94 B
lever1.lm.txt	231 B
lever2.lm.txt	231 B
junctionlever_yard_v5.gs	24.1 kB
lever1_2.im	30.6 kB
lever1_1.im	53.4 kB
lever2_1.im	53.4 kB
lever2_2.im	30.0 kB
thumbnail.jpg	31.7 kB
lever1_0.im	91.5 kB
lever2_0.im	91.5 kB
ball lever.tga	1.0 MB
ball lever_normal.tga	1.0 MB
Общий объём файлов:	2.4 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:368725:90065:4>	mojunction	NSWGR ball lever to switch yard points, mount right, default right, for avatar operation	4.2	6.06.2024 16:19:57	1.2 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-25:893>	#-25	track	Путь_Невидимый	0	19.12.2022 21:53:41	10.1 kB
Всего связей: 1, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет