<kuid2:368725:20322:1> NSWGR facing point lock, inverting, ACW

Тип: buildable
Опубликовано: 14.05.2023 14:59:31
Скачиваний: 20
Размер: 738.1 kB

Скачать

An animated facing point lock mechanism with an inverting crank operating in an anti-clockwise direction.
Model based on a facing point lock in use on NSWGR in the mid 20th century.
Designed for use in conjunction with 'Protrack NSWGR' series as updated with release of <kuid2:368725:49000:2> 'Protrack NSWGR Mesh Library'. Place the lock asset between the tracks at a junction with the locking mechanism centred over the sleeper under the leading stretch bar. The crank should then appear secured to the second sleeper in advance of the sleeper with the locking mechanism.
Use rod spline <kuid:368725:30071> 'point rodding, no guide, 1x, NSWGR' to attach to the incoming side of the crank. The rod spline attaches from the right side of the track when looking from the crank towards the lock. The rod must push on the crank to cause it to pull the lock key to the unlocked position. Therefore the crank is inverting.
The animation does not operate automatically. The asset's script allows the animation to be operated by messages received from lever-frame assets such as <kuid:368725:90044> 'NSWGR mechanical lever frame for a station yard, 1-5 levers, for avatar operation'.
To successfully associate a FPL with a lever frame, a naming convention must be followed. If the FPL locks a junction named 'HR_B_35' operated by frame 'B' at location 'HR', then the FPL is named 'HR_B_35_FPL'. The FPL must be operated from the same frame as its junction.
The default position of the animation has the lock in the locked position. The crank must pull the outgoing arm connected to the lock in order to move it to the unlocked position.

config.txt:

kuid                                    <kuid2:368725:20322:1>
username                                "NSWGR facing point lock, inverting, ACW"
description                             "An animated facing point lock mechanism with an inverting crank operating in an anti-clockwise direction. 
Model based on a facing point lock in use on NSWGR in the mid 20th century.
Designed for use in conjunction with 'Protrack NSWGR' series as updated with release of <kuid2:368725:49000:2> 'Protrack NSWGR Mesh Library'. Place the lock asset between the tracks at a junction with the locking mechanism centred over the sleeper under the leading stretch bar. The crank should then appear secured to the second sleeper in advance of the sleeper with the locking mechanism.
Use rod spline <kuid:368725:30071> 'point rodding, no guide, 1x, NSWGR' to attach to the incoming side of the crank. The rod spline attaches from the right side of the track when looking from the crank towards the lock. The rod must push on the crank to cause it to pull the lock key to the unlocked position. Therefore the crank is inverting.
The animation does not operate automatically. The asset's script allows the animation to be operated by messages received from lever-frame assets such as <kuid:368725:90044> 'NSWGR mechanical lever frame for a station yard, 1-5 levers, for avatar operation'.
To successfully associate a FPL with a lever frame, a naming convention must be followed. If the FPL locks a junction named 'HR_B_35' operated by frame 'B' at location 'HR', then the FPL is named 'HR_B_35_FPL'. The FPL must be operated from the same frame as its junction. 
The default position of the animation has the lock in the locked position. The crank must pull the outgoing arm connected to the lock in order to move it to the unlocked position."
kind                                    "buildable"
trainz-build                            4.2
category-class                          "WX"
category-region                         "AU"
category-era                            "1900s;1910s;1920s;1930s;1940s;1950s;1960s;1970s"
script                                  "fpl"
class                                   "fpl"
height-range                            -1,1
rotate-yz-range                         -2,2
rollstep                                0.1
mesh-detail-level-count                 4
mesh-table
{
  default
  {
    mesh                                "dummy.im"
    auto-create                         1
  }
  non-animated
  {
    mesh                                "non-anim.im"
    auto-create                         1
    lod-level                           0
  }
  non-animated_lod1
  {
    mesh                                "non-anim_lod1.im"
    auto-create                         1
    lod-level                           1
  }
  non-animated_lod2
  {
    mesh                                "non-anim_lod2.im"
    auto-create                         1
    lod-level                           2
  }
  non-animated_lod3
  {
    mesh                                "non-anim_lod3.im"
    auto-create                         1
    lod-level                           3
  }
  animated
  {
    mesh                                "anim.im"
    anim                                "anim.kin"
    auto-create                         1
    lod-level                           0
  }
  animated_lod1
  {
    mesh                                "anim_lod1.im"
    anim                                "anim.kin"
    auto-create                         1
    lod-level                           1
  }
  animated_lod2
  {
    mesh                                "anim_lod2.im"
    anim                                "anim.kin"
    auto-create                         1
    lod-level                           2
  }
}
attached-track
{
  rod-attach
  {
    track                               <kuid:368725:30070>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.rod1c"
      1                                 "a.rod1d"
    }
  }
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid-table
{
  0                                     <kuid:368725:30070>
}

Файлы:

fpl-fpl.texture.txt	41 B
dummy.im	936 B
anim.kin	5.2 kB
fpl-normal-fpl-normal.texture.txt	80 B
fpl.gs	1.2 kB
anim_lod2.im	36.7 kB
thumbnail.jpg	7.5 kB
non-anim_lod3.im	26.6 kB
anim_lod1.im	56.4 kB
non-anim_lod2.im	55.8 kB
non-anim_lod1.im	75.1 kB
anim.im	86.6 kB
non-anim.im	92.5 kB
fpl.tga	512.0 kB
fpl-normal.tga	512.0 kB
Общий объём файлов:	1.4 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:368725:20322:1>	buildable	NSWGR facing point lock, inverting, ACW	4.2	14.05.2023 14:59:31	738.1 kB
<kuid:368725:20322>	buildable	NSWGR facing point lock, inverting, ACW	4.2	2.08.2020 9:59:22	737.8 kB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid2:368725:30070:1>	#368725	track	Invisible path for scenery attached track, arrow at origin end	3.7	21.04.2023 19:16:20	8.6 kB
Всего связей: 1, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет