<kuid2:368725:17007:1> NSWGR D53 cab interior

Тип: Кабина
Опубликовано: 18.10.2021 20:29:25
Скачиваний: 38
Размер: 5.7 MB

Скачать

Cab interior of a D53-class goods locomotive of NSWGR. Created for <kuid:368725:15035> 'NSWGR D53 standard goods engine, weathered'.

config.txt:

kuid                                    <kuid2:368725:17007:1>
username                                "NSWGR D53 cab interior"
description                             "Cab interior of a D53-class goods locomotive of NSWGR. Created for <kuid:368725:15035> 'NSWGR D53 standard goods engine, weathered'."
kind                                    "interior"
interior-controls-type                  "full"
outside-visible-from-cabin              1
controlset                              <kuid:368725:90058>
category-class                          "ZI"
category-region                         "AU"
category-era                            "1920s;1930s;1940s;1950s;1960s"
trainz-build                            4.2
script                                  "D53interior_2"
class                                   "interior"
cameralist
{
  camera0                               1.5,0.5,0.85,3.14,0
  camera1                               1.5,0.5,0.85,0,0
  camera2                               1,1,0.85,-0.2,-0.3
  camera3                               0,1.8,0.85,0,-0.2
  camera4                               -1,1,0.85,0.2,-0.4
  camera5                               -1.5,0.5,0.85,0,0
  camera6                               -1.5,0.5,0.85,-3.14,0
}
cameradefault                           2
mesh-table
{
  default
  {
    mesh                                "interior.im"
    auto-create                         1
    effects
    {
      toplight
      {
        kind                            "corona"
        att                             "a.toplight"
        directional                     1
        object-size                     0.25
      }
      frontlight
      {
        kind                            "corona"
        att                             "a.frontlight"
        directional                     1
        object-size                     0.25
      }
    }
  }
  trainbrakelap_lever
  {
    mesh                                "brake_lever.im"
    auto-create                         1
    att                                 "a.brake"
    angles                              0,-2
    limits                              0,4
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0,0,0,0,0
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          1
  }
  independantbrake_lever
  {
    mesh                                "independant_brake_lever.im"
    auto-create                         1
    tooltip-token                       "handbrake"
    att                                 "a.independant_brake"
    limits                              0,30
    angles                              0,12.57
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         0,0,0,0,0,0,0,0,0,0,0
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          1
  }
  regulator
  {
    mesh                                "regulator.im"
    anim                                "regulator.kin"
    auto-create                         1
    att                                 "a.regulator"
    att-parent                          "default"
    kind                                "animated-lever"
    radius                              0.2
    limits                              0,1
    mousespeed                          -1
  }
  reverser
  {
    mesh                                "reverser.im"
    anim                                "reverser.kin"
    auto-create                         1
    att                                 "a.reverser"
    att-parent                          "default"
    kind                                "animated-lever"
    limits                              -1,1
    mousespeed                          1
  }
  blower
  {
    kind                                "lever"
    mesh                                "wheel_round.im"
    auto-create                         1
    tooltip-token                       "blower"
    angles                              -5,0
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         1,0,0,0,0,0,0,0,0,0,1
    radius                              0.2
    att                                 "a.blower"
    att-parent                          "default"
    mousespeed                          -1
  }
  water_valve_1
  {
    mesh                                "water_valve.im"
    auto-create                         1
    limits                              0,1
    angles                              0,-1.57
    notches                             0,1
    notchheight                         1,1
    att                                 "a.valve01"
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          1
  }
  water_valve_2
  {
    mesh                                "water_valve.im"
    auto-create                         1
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         1,1
    att                                 "a.valve02"
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          1
  }
  water_valve_3
  {
    mesh                                "water_valve.im"
    auto-create                         1
    limits                              0,1
    angles                              1.57,0
    notches                             0,1
    notchheight                         1,1
    att                                 "a.valve03"
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          1
  }
  water_valve_4
  {
    mesh                                "water_valve.im"
    auto-create                         1
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         1,1
    att                                 "a.valve04"
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          1
  }
  water_valve_5
  {
    mesh                                "water_valve.im"
    auto-create                         1
    limits                              0,1
    angles                              1.57,0
    notches                             0,1
    notchheight                         1,1
    att                                 "a.valve05"
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          1
  }
  water_valve_6
  {
    mesh                                "water_valve.im"
    auto-create                         1
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         1,1
    att                                 "a.valve06"
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          1
  }
  water_injector_0
  {
    mesh                                "injector.im"
    auto-create                         1
    limits                              0,1
    angles                              0,5
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         0,0,0,0,0,0,0,0,0,0,0
    att                                 "a.injector0"
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          1
  }
  water_injector_1
  {
    mesh                                "injector.im"
    auto-create                         1
    limits                              0,1
    angles                              0,5
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         0,0,0,0,0,0,0,0,0,0,0
    att                                 "a.injector1"
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          1
  }
  lubricator_steam
  {
    mesh                                "wheel_round.im"
    auto-create                         1
    tooltip-token                       "lubsteam"
    limits                              0,1
    angles                              0,9
    notches                             0,1
    notchheight                         1,1
    att                                 "a.wheel02"
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          -1
  }
  generator_steam
  {
    mesh                                "wheel_hex.im"
    auto-create                         1
    tooltip-token                       "gensteam"
    limits                              0,1
    angles                              0,9
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0,0,0,0,0
    att                                 "a.wheel03"
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          -1
  }
  air_compressor
  {
    mesh                                "wheel_round.im"
    auto-create                         1
    tooltip-token                       "aircomp"
    limits                              0,1
    angles                              0,9
    notches                             0,1
    notchheight                         0,0
    att                                 "a.wheel05"
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          -1
  }
  waterglass_left
  {
    mesh                                "waterglass_left.im"
    anim                                "waterglass_left.kin"
    att                                 "a.waterglass_left"
    att-parent                          "default"
    auto-create                         1
    limits                              0,100
    kind                                "animated-dial"
  }
  waterglass_right
  {
    mesh                                "waterglass_right.im"
    anim                                "waterglass_right.kin"
    att                                 "a.waterglass_right"
    att-parent                          "default"
    auto-create                         1
    limits                              0,100
    kind                                "animated-dial"
  }
  boiler_needle
  {
    kind                                "needle"
    mesh                                "needle_boiler_pressure.im"
    att                                 "a.boiler_pressure_needle"
    att-parent                          "default"
    limits                              0,2068
    angles                              0,4.76475
    auto-create                         1
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "needle_black_small_short.im"
    auto-create                         1
    att                                 "a.brake_cylinder_pressure"
    att-parent                          "default"
    limits                              0,1050
    angles                              0,1.309
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "needle_red_small_short.im"
    auto-create                         1
    att                                 "a.main_res_pressure"
    att-parent                          "default"
    limits                              0,1050
    angles                              0,1.309
  }
  cylinder_drain
  {
    angles                              0,-0.3
    mesh                                "cylinder_clean.im"
    auto-create                         1
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    att                                 "a.cylinderclean"
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          -1
  }
  fire_plates
  {
    mesh                                "fireplates.im"
    anim                                "fireplates.kin"
    auto-create                         1
    kind                                "animated-lever"
    att                                 "a.fire_plates"
    att-parent                          "default"
    tooltip-token                       "firedoor"
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0,0,0,0,0
    limits                              0,1
    mousespeed                          -1
  }
  sanding_lever
  {
    kind                                "lever"
    mesh                                "sanding_lever.im"
    auto-create                         1
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         0.5,1,0.5
    angles                              -0.78,0.78
    att                                 "a.sanding_lever"
    att-parent                          "default"
    mousespeed                          1
  }
  light_lever
  {
    kind                                "lever"
    mesh                                "light_lever.im"
    tooltip-token                       "headlight"
    auto-create                         1
    limits                              0,1
    notches                             0,0.5,1
    notchheight                         1,0.5,0.5
    angles                              0,-1.57
    att                                 "a.light_lever"
    att-parent                          "default"
    mousespeed                          -1
  }
  horn
  {
    kind                                "pullrope"
    mesh                                "whistle.im"
    auto-create                         1
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    angles                              0,0.01
    att                                 "a.whistle"
    att-parent                          "default"
    mousespeed                          -1
  }
  grate_rockers
  {
    mesh                                "grate_rockers.im"
    anim                                "grate_rockers.kin"
    auto-create                         1
    att                                 "a.grate_rocker"
    att-parent                          "default"
  }
  grate_rocker_lever1
  {
    mesh                                "grate_lever.im"
    anim                                "grate_lever.kin"
    auto-create                         1
    att                                 "a.gratelever1"
    att-parent                          "grate_rockers"
  }
  grate_rocker_lever2
  {
    mesh                                "grate_lever.im"
    anim                                "grate_lever.kin"
    auto-create                         1
    att                                 "a.gratelever2"
    att-parent                          "grate_rockers"
  }
  grate_lever_lock1
  {
    mesh                                "grate_lock.im"
    anim                                "grate_lock.kin"
    auto-create                         1
    att                                 "a.gratelock1"
    att-parent                          "grate_rockers"
  }
  grate_lever_lock2
  {
    mesh                                "grate_lock.im"
    anim                                "grate_lock.kin"
    auto-create                         1
    att                                 "a.gratelock2"
    att-parent                          "grate_rockers"
  }
}
string-table
{
  aircomp                               "Air compressor steam (not enabled)"
  lubsteam                              "Lubricator steam (not enabled)"
  gensteam                              "Generator steam"
  blower                                "Blower"
  rockup                                "Front-grate rocker"
  rocklow                               "Back-grate rocker"
  handbrake                             "Handbrake (ind. brake)"
  firedoor                              "Fire door"
  headlight                             "Front headlight"
}
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               240
    height                              180
  }
}
author                                  "Paul Mace and Leigh Stokes (ElStoko)"
contact-email                           "Forum PM to ElStoko"
license                                 "Released as freeware by the purchaser, ElStoko. Not to be distributed elsewhere."
kuid-table
{
  sessionvariables                      <kuid:-3:10197>
  cablights                             <kuid:209453:99982>
  controlset                            <kuid:368725:90058>
}

Файлы:

cab.texture.txt	26 B
env_metal.texture.txt	32 B
waterglass_right.im	2.3 kB
grate_lock.kin	2.3 kB
whistle.im	7.2 kB
needle_red_small.im	6.4 kB
waterglass_left.im	2.3 kB
light_lever.im	10.8 kB
wheel_hex.im	12.3 kB
fireplates.kin	4.1 kB
needle_red_small_short.im	3.6 kB
waterglass_right.kin	4.5 kB
waterglass_left.kin	4.5 kB
grate_lever.kin	2.3 kB
sanding_lever.im	3.3 kB
needle_black_small_short.im	3.6 kB
grate_rockers.kin	3.2 kB
regulator.kin	1.4 kB
brake_lever.im	12.7 kB
needle_black_small.im	6.4 kB
water_valve.im	3.9 kB
needle_red.im	6.4 kB
needle_black.im	6.4 kB
grate_lock.im	3.4 kB
reverser.kin	4.5 kB
wheel_round.im	12.5 kB
needle_boiler_pressure.im	6.5 kB
grate_lever.im	6.8 kB
independant_brake_lever.im	6.2 kB
injector.im	12.5 kB
cylinder_clean.im	3.2 kB
regulator.im	10.0 kB
env_metal.bmp	12.1 kB
reverser.im	19.5 kB
d53interior_2.gs	13.4 kB
$screenshot$.jpg	34.4 kB
fireplates.im	72.6 kB
grate_rockers.im	36.8 kB
interior.im	667.4 kB
cab.tga	16.0 MB
Общий объём файлов:	17.0 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:368725:17007:3>	interior	NSWGR D53 cab interior	4.2	4.12.2024 22:03:08	5.7 MB
<kuid2:368725:17007:1>	interior	NSWGR D53 cab interior	4.2	18.10.2021 20:29:25	5.7 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-3:10197>	#-3	library	ПеременныеСессии	0	2.07.2020 9:39:31	257 B
<kuid:209453:99982>	#209453	texture	Corona (Yellow)	2.9	11.10.2023 9:35:02	3.0 kB
<kuid2:368725:90058:2>	#368725	controlset	Supplementary keyboard driver controls for steam cabins	4.5	3.12.2024 0:19:12	9.8 kB
Всего связей: 3, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:368725:15035:2>	#368725	traincar	NSWGR D53 standard goods engine, weathered	4.2	18.10.2021 18:38:25	5.5 MB
<kuid2:368725:15035:6>	#368725	traincar	NSWGR D53 standard goods engine, weathered	4.2	26.08.2024 18:33:06	5.5 MB
<kuid2:368725:15035:7>	#368725	traincar	NSWGR D53 standard goods engine, weathered	4.2	4.12.2024 22:05:33	5.6 MB