<kuid2:361619:100202:3> кабина М62-1867

Тип: Кабина
Опубликовано: 7.01.2018 20:56:09
Скачиваний: 2019
Размер: 25.3 MB
Автор: DUMONT
Скачать

config.txt:
kuid                                    <kuid2:361619:100202:3>
kind                                    "interior"
username                                "M62-1867 interior"
username-ru                             "кабина М62-1867"
trainz-build                            3.7
cameradefault                           14
controlset                              <kuid2:151055:60033:2>
category-class                          "ZI"
category-region                         "BY;KZ;RU;SU;UA;UZ"
category-era                            "1970s;1980s;1990s;2000s;2010s"
author                                  "Дмитрий 'Zima' Костюченко"
contact-email                           "du-mont@yandex.ru"
contact-website                         "trainzdevteam.ru"
organisation                            "Trainz Dev Team"
script                                  "dm62cab_empty.gs"
class                                   "DM62CabEmpty"
extensions
{
  protectedkey                          "cf11-e9a1ce7d-e8c8b47d-b6129bbb-5fb7563f-3cc0"
  functions                             5
  dev-amperage-max                      6000
  dev-voltage-max                       1000
  rb-butt-type                          0
  vk-butt-type                          2
  brake-settings
  {
    attsound-locobrake                  "a.locobrake_handle"
    attsound-trainbrake                 "a.trainbrake"
    attsound-epv                        "a.epv"
    control-brakeunlock                 "ctrl-brake-block"
    control-locobrake                   "ctrl-locobrake"
    control-trainbrake                  "ctrl-trainbrake"
    control-reducer                     "pl-brake-reducer"
    needle-mainreservoir                "dev-main-reservoir"
    needle-brakepipe                    "dev-brake-pipe"
    needle-equaliser                    "dev-equaliser-reservoir"
    needle-brakecylinderfront           "dev-brake-cylinder-prm"
    needle-brakecylinderback            "dev-brake-cylinder-scn"
    sound-locobrakechange               "locobrake.wav"
    proxymesh-offset                    "proxy-locobrake"
    offset-limit                        -9
  }
  3sl2m-settings
  {
    attsound                            "a.speedo_needle"
    needle-hour                         "ndl-3sl2m-hour"
    needle-minutes                      "ndl-3sl2m-minute"
    needle-speed                        "ndl-3sl2m-speed"
    mesh-spindel                        "sl2m-val"
  }
  alsn-settings
  {
    blocks                              128
    attsound                            "a.epv"
    control-epvkey                      "ctrl-epv-key"
    control-rbbutton                    "butt-epv-rb"
    control-skbbutton                   "butt-epv-skb"
    control-skzhbutton                  "butt-epv-skzh"
    control-vkbutton                    "butt-epv-vk"
    control-dzswitch                    "sw-alsn-white"
    control-filterswitch                "sw-alsn-filter"
    mesh-alsgreenindicator              "als-green"
    mesh-alsyellowindicator             "als-yellow"
    mesh-alsredyellowindicator          "als-redyellow"
    mesh-alsredindicator                "als-red"
    mesh-alswhiteindicator              "als-white"
  }
  cabin-moving-settings
  {
    cabinmesh                           "default"
    stiff                               10
    viscous                             3
  }
  sound-length-base
  {
    sound/skb_in.wav                    0.059
    sound/skb_out.wav                   0.108
    sound/butt_in.wav                   0.136
    sound/butt_out.wav                  0.124
    sound/butt_in2.wav                  0.14
    sound/butt_out2.wav                 0.128
    sound/butt_in3.wav                  0.133
    sound/butt_out3.wav                 0.121
  }
}
cameralist
{
  camera0                               -1.085,-0.095,0.31,1.02,-0.317
  camera1                               0,-0.05,0.31,0,-0.15
  camera2                               1.085,-0.095,0.31,-1.02,-0.317
  camera3                               0.028,-0.038,0.31,-0.965,-0.228
  camera4                               -0.904,-0.341,0.304,-1.292,0.358
  camera5                               0.028,-0.038,0.31,-0.965,-0.228
  camera6                               0.273,-0.355,0.1,0.404,-0.693
  camera7                               -0.78,-0.302,0.08,-0.016,-0.739
  camera8                               -0.695,-0.309,-0.349,-0.112,-0.498
  camera9                               -0.77,-0.263,-0.499,-0.762,-0.608
  camera10                              -0.333,-0.241,-0.611,-0.028,-0.232
  camera11                              -0.476,-0.653,0.068,-0.518,-0.578
  camera12                              0.606,-0.012,0.085,0,0
  camera13                              -0.295,-0.157,0.085,0.012,-0.59
  camera14                              -0.835,-0.025,0.085,0,-0.334
}
mesh-table
{
  default
  {
    mesh                                "Cab.im"
    anim                                "Cab.kin"
    auto-create                         1
    effects
    {
      diesel-room
      {
        kind                            "attachment"
        att                             "a.diz"
        default-mesh                    <kuid2:361619:100025:2>
      }
    }
  }
  headray
  {
    mesh                                "luch.IM"
    att-parent                          "default"
    att                                 "a.luch"
    kind                                "light"
    test-collisions                     0
  }
  console-front-cab
  {
    mesh                                "extra1.im"
    att                                 "a.extra"
    test-collisions                     0
    auto-create                         1
  }
  console-rear-cab
  {
    mesh                                "extra2.im"
    att                                 "a.extra"
    test-collisions                     0
    auto-create                         0
  }
  avt-loco-control
  {
    mesh                                "bswitch.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch22"
    angles                              0.244,-0.244
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
  }
  avt-light-device
  {
    mesh                                "bswitch.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch23"
    angles                              0.244,-0.244
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
  }
  avt-heating
  {
    mesh                                "bswitch.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch24"
    angles                              0.244,-0.244
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
  }
  avt-heater
  {
    mesh                                "bswitch.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch25"
    angles                              0.244,-0.244
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
  }
  avt-control
  {
    mesh                                "bswitch.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch26"
    angles                              0.244,-0.244
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
  }
  avt-fuel-pump
  {
    mesh                                "bswitch.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch27"
    angles                              0.244,-0.244
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
  }
  sw-cooler-oil-blind
  {
    mesh                                "wht_tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch9"
    angles                              0.415,-0.415
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
  }
  sw-cooler-whater-blind
  {
    mesh                                "wht_tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch10"
    angles                              0.415,-0.415
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
  }
  sw-top-blind
  {
    mesh                                "wht_tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch11"
    angles                              0.415,-0.415
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
  }
  sw-cooler-fan
  {
    mesh                                "wht_tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch12"
    angles                              0.415,-0.415
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
  }
  sw-headlight-bright
  {
    mesh                                "wht_tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch28"
    angles                              0.415,-0.415
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
  }
  sw-headlight-dimly
  {
    mesh                                "wht_tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch29"
    angles                              0.415,-0.415
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
  }
  sw-headlight
  {
    mesh                                "wht_tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch15"
    angles                              0.415,-0.415
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
  }
  sw-alsn-white
  {
    mesh                                "wht_tumb_drk.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch4"
    angles                              -0.415,0.415
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
    mousespeed                          -1
  }
  sw-fire
  {
    mesh                                "wht_tumb_drk.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch5"
    angles                              0.415,-0.415
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
  }
  sw-green-light
  {
    mesh                                "wht_tumb_drk.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch2"
    angles                              0.415,-0.415
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
  }
  sw-alsn-filter
  {
    mesh                                "wht_tumb_drk.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch1"
    angles                              0.415,-0.415
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
  }
  sw-move
  {
    mesh                                "wht_tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch13"
    angles                              0.415,-0.415
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
  }
  sw-heating
  {
    mesh                                "blk_tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch14"
    angles                              0.376,-0.376
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
  }
  sw-pointer-damage
  {
    mesh                                "wht_tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch7"
    angles                              0.415,-0.415
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
  }
  sw-cooler-control
  {
    mesh                                "blk_tumb.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch8"
    angles                              -0.376,0.376
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    radius                              0.035
    mousespeed                          -1
  }
  sw-cabin-light
  {
    mesh                                "blk_tumb_drk.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch6"
    angles                              0.376,-0.376
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
  }
  sw-device-light
  {
    mesh                                "blk_tumb_drk.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch3"
    angles                              0.376,-0.376
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
  }
  sw-buffer-left
  {
    mesh                                "blk_tumb_drk.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch17"
    angles                              0.376,-0.376
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
  }
  sw-buffer-right
  {
    mesh                                "blk_tumb_drk.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch18"
    angles                              0.376,-0.376
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
  }
  sw-check-chain-light
  {
    mesh                                "blk_tumb_drk.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch19"
    angles                              0.376,-0.376
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
  }
  sw-device
  {
    mesh                                "blk_tumb_drk.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch16"
    angles                              0.376,-0.376
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
  }
  sw-check-chain-axle
  {
    mesh                                "blk_tumb_drk.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch21"
    angles                              0.376,-0.376
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
  }
  sw-check-chain-mop
  {
    mesh                                "blk_tumb_drk.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.switch20"
    angles                              0.376,-0.376
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.035
  }
  sw-horn-right
  {
    mesh                                "horn_switch.im"
    kind                                "pulllever"
    auto-create                         1
    att                                 "a.horn1"
    angles                              -0.226,0.226
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
    mousespeed                          -1
  }
  sw-horn-left
  {
    mesh                                "horn_switch2.im"
    kind                                "pulllever"
    auto-create                         1
    att                                 "a.horn2"
    angles                              -0.226,0.226
    limits                              -1,1
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.035
    mousespeed                          -1
  }
  pedal-left
  {
    mesh                                "pedal.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.sand1"
    angles                              0,0.101
    limits                              0,1
    test-collisions                     1
  }
  pedal-right
  {
    mesh                                "pedal.im"
    kind                                "pulllever"
    auto-create                         1
    att                                 "a.sand2"
    angles                              0,0.101
    notchheight                         0,0
    limits                              0,1
    test-collisions                     1
  }
  butt-diesel-start
  {
    mesh                                "blk_btn.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.btn06"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  butt-sand-1axle
  {
    mesh                                "blk_btn.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.btn02"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  butt-checkpoint
  {
    mesh                                "blk_btn.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.btn1"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  butt-epv-skzh
  {
    mesh                                "blk_btn.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.btn05"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  butt-epv-rb
  {
    mesh                                "rb_btn.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.RB"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  butt-shunt
  {
    mesh                                "blk_btn.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.btn08"
    limits                              0,1
    angles                              0,-0.002
    mousespeed                          15
  }
  butt-epv-vk
  {
    mesh                                "blk_btn.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.btn09"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  butt-epv-skb
  {
    mesh                                "rb_btn.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.Skb"
    limits                              0,1
    angles                              0,-0.005
    mousespeed                          15
  }
  butt-radio
  {
    mesh                                "r_switch.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.r_switch"
    limits                              0,1
    angles                              0,-0.001
    mousespeed                          15
    effects
    {
      radio-button-on
      {
        kind                            "texture-replacement"
        texture                         "rt_button.texture"
      }
    }
  }
  butt-radio-volume-up
  {
    mesh                                "r_volup.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.r_vol_up"
    limits                              0,1
    angles                              0,-0.001
    mousespeed                          15
    effects
    {
      radio-button-volume-up
      {
        kind                            "texture-replacement"
        texture                         "rt_button.texture"
      }
    }
  }
  butt-radio-volume-down
  {
    mesh                                "r_voldn.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.r_vol_dn"
    limits                              0,1
    angles                              0,-0.001
    mousespeed                          15
    effects
    {
      radio-button-volume-down
      {
        kind                            "texture-replacement"
        texture                         "rt_button.texture"
      }
    }
  }
  butt-radio-contrast-up
  {
    mesh                                "r_conup.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.r_con_up"
    limits                              0,1
    angles                              0,-0.001
    mousespeed                          15
    effects
    {
      radio-button-contrast-up
      {
        kind                            "texture-replacement"
        texture                         "rt_button.texture"
      }
    }
  }
  butt-radio-contrast-down
  {
    mesh                                "r_condn.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.r_con_dn"
    limits                              0,1
    angles                              0,-0.001
    mousespeed                          15
    effects
    {
      radio-button-contrast-down
      {
        kind                            "texture-replacement"
        texture                         "rt_button.texture"
      }
    }
  }
  butt-radio-lightness
  {
    mesh                                "r_lt_switch.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.r_lt"
    limits                              0,1
    angles                              0,-0.001
    mousespeed                          15
    effects
    {
      radio-button-lightness
      {
        kind                            "texture-replacement"
        texture                         "rt_button.texture"
      }
    }
  }
  radio-krishka
  {
    mesh                                "r_krishka.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.dverka"
    angles                              0,-1.57
    notches                             0,1
    notchheight                         0,0
    test-collisions                     1
    mousespeed                          -2
  }
  radio-interface
  {
    mesh                                "r_interface.im"
    att                                 "a.transport"
    att-parent                          "default"
    auto-create                         1
    effects
    {
      radio-display
      {
        kind                            "texture-replacement"
        texture                         "raciya_disp_off.texture"
      }
      radio-button
      {
        kind                            "texture-replacement"
        texture                         "rt_button.texture"
      }
    }
  }
  pl-wiper-left
  {
    kind                                "lever"
    mesh                                "wipsw.im"
    auto-create                         1
    att                                 "a.l_wip_sw"
    mousespeed                          0.3
    angles                              0,30
    limits                              0,1
  }
  pl-wiper-right
  {
    kind                                "lever"
    mesh                                "wipsw.im"
    auto-create                         1
    att                                 "a.r_wip_sw"
    mousespeed                          0.3
    angles                              0,30
    limits                              0,1
  }
  pl-brake-reducer
  {
    kind                                "lever"
    mesh                                "redukt.im"
    att                                 "a.redukt"
    auto-create                         1
    mousespeed                          -0.3
    angles                              0,-3.14
    limits                              3.9,5.55
  }
  pl-brake-stabilizer
  {
    kind                                "lever"
    mesh                                "likvid.im"
    att                                 "a.likvid"
    auto-create                         1
    mousespeed                          -0.3
    angles                              0,-3.14
    limits                              0,1
  }
  ctrl-controller
  {
    mesh                                "throttle_ring.im"
    kind                                "lever"
    att                                 "a.throttle"
    auto-create                         1
    angles                              0,3.883
    limits                              0,15
    notches                             0,0.0667,0.1334,0.2,0.2667,0.3334,0.4,0.4667,0.5334,0.6,0.6667,0.7333,0.8,0.8667,0.9333,1
    mousespeed                          0.2
    notchheight                         0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    radius                              0.1
  }
  ctrl-reverser
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "reverser_lever.im"
    att                                 "a.reverser_lever"
    limits                              -1,1
    angles                              -0.325,0.325
    notches                             0,0.5,1
    notchheight                         0,0,0
    att-parent                          "default"
  }
  ctrl-trainbrake
  {
    mesh                                "trainbrake.IM"
    att                                 "a.trainbrake"
    auto-create                         1
    kind                                "lever"
    limits                              0,6
    angles                              0,-2.118
    notches                             0,0.31,0.46,0.56,0.61,0.7,1
    notchheight                         2,2,2,2,2,2,2
    radius                              0.13
    att-parent                          "default"
    mousespeed                          -0.2
  }
  ctrl-locobrake
  {
    mesh                                "trainbrake2.IM"
    att                                 "a.str"
    att-parent                          "proxy-locobrake"
    auto-create                         1
    kind                                "lever"
    angles                              0,-3.14
    limits                              0,4
    notches                             0.03,0.255,0.51,0.765,1
    notchheight                         0.001,0.001,0.001,0.001,0.001
    radius                              0.15
    test-collisions                     1
    mousespeed                          -0.2
  }
  ctrl-handbrake
  {
    kind                                "lever"
    mesh                                "handbrake.im"
    att                                 "a.handbrake"
    auto-create                         1
    mousespeed                          0.3
    angles                              0,30
  }
  ctrl-brake-block
  {
    mesh                                "brake_block_lever.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.brake_block_lever"
    angles                              -3.15,0
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.05
    test-collisions                     1
    mousespeed                          -1
  }
  ctrl-epv-key
  {
    mesh                                "EPK_Key.IM"
    kind                                "lever"
    auto-create                         1
    att                                 "a.epv"
    angles                              0,-1.57
    notches                             0,1
    notchheight                         1,1
    radius                              0.05
    test-collisions                     1
    mousespeed                          -1
  }
  ind-control-mop
  {
    mesh                                "grn_lt.im"
    att                                 "a.lt14"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  ind-control-axle
  {
    mesh                                "grn_lt.im"
    att                                 "a.lt05"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  ind-overheat-mop
  {
    mesh                                "grn_lt.im"
    att                                 "a.lt16"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  ind-overheat-axle
  {
    mesh                                "grn_lt.im"
    att                                 "a.lt15"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  ind-brakied
  {
    mesh                                "grn_lt.im"
    att                                 "a.lt22"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  ind-disiel-worked
  {
    mesh                                "grn_lt.im"
    att                                 "a.lt09"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  ind-disiel-worked-two
  {
    mesh                                "grn_lt.im"
    att                                 "a.lt13"
    kind                                "light"
    att-parent                          "console-front-cab"
    test-collisions                     0
  }
  ind-disiel-worked-three
  {
    mesh                                "grn_lt.im"
    att                                 "a.lt07"
    kind                                "light"
    att-parent                          "console-front-cab"
    test-collisions                     0
  }
  ind-disiel-worked-four
  {
    mesh                                "grn_lt.im"
    att                                 "a.lt08"
    kind                                "light"
    att-parent                          "console-front-cab"
    test-collisions                     0
  }
  ind-ground
  {
    mesh                                "grn_lt.im"
    att                                 "a.lt20"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  ind-reset-traction
  {
    mesh                                "red_lt.im"
    att                                 "a.lt03"
    kind                                "light"
    att-parent                          "console-front-cab"
    test-collisions                     0
  }
  ind-reset-traction-rear-cab
  {
    mesh                                "red_lt.im"
    att                                 "a.lt23"
    kind                                "light"
    att-parent                          "console-rear-cab"
    test-collisions                     0
  }
  ind-reset-traction-two
  {
    mesh                                "red_lt.im"
    att                                 "a.lt17"
    kind                                "light"
    att-parent                          "console-front-cab"
    test-collisions                     0
  }
  ind-reset-traction-three
  {
    mesh                                "red_lt.im"
    att                                 "a.lt02"
    kind                                "light"
    att-parent                          "console-front-cab"
    test-collisions                     0
  }
  ind-reset-traction-four
  {
    mesh                                "red_lt.im"
    att                                 "a.lt01"
    kind                                "light"
    att-parent                          "console-front-cab"
    test-collisions                     0
  }
  ind-break
  {
    mesh                                "grn_lt.im"
    att                                 "a.lt19"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  ind-fire
  {
    mesh                                "red_lt.im"
    att                                 "a.lt18"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  ind-pass
  {
    mesh                                "prop_lt.im"
    att                                 "a.lt04"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  ind-move
  {
    mesh                                "red_lt.im"
    att                                 "a.lt21"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  ind-pss-left
  {
    mesh                                "red_lt.im"
    att                                 "a.lt06"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  ind-pss-right
  {
    mesh                                "red_lt.im"
    att                                 "a.lt10"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  dev-brake-cylinder-prm
  {
    mesh                                "black_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakecylinder_needle"
    limits                              0,10
    angles                              0,4.726
    att-parent                          "default"
    test-collisions                     0
  }
  dev-brake-cylinder-scn
  {
    mesh                                "red_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakecylinder_needle2"
    limits                              0,10
    angles                              0,4.726
    att-parent                          "default"
    test-collisions                     0
  }
  dev-main-reservoir
  {
    mesh                                "red_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain_needle"
    limits                              0,16
    angles                              0,4.745
    att-parent                          "default"
    test-collisions                     0
  }
  dev-brake-pipe
  {
    mesh                                "black_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakepipe_needle"
    limits                              0,16
    angles                              0,4.745
    att-parent                          "default"
    test-collisions                     0
  }
  dev-equaliser-reservoir
  {
    mesh                                "black_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bploco_equaliser"
    limits                              0,16
    angles                              0,4.745
    att-parent                          "default"
    test-collisions                     0
  }
  dev-oil-pressure
  {
    mesh                                "P_needle.im"
    anim                                "P_needle.kin"
    att                                 "a.oilpressure"
    att-parent                          "default"
    auto-create                         1
  }
  dev-oil-pressure-lt
  {
    mesh                                "P_needle_lt.im"
    anim                                "P_needle.kin"
    att                                 "a.oilpressure"
    att-parent                          "default"
  }
  dev-water-temperature
  {
    mesh                                "temp_needle.im"
    auto-create                         1
    att                                 "a.t_water"
    anim                                "temp_needle.kin"
    att-parent                          "default"
  }
  dev-oil-temperature
  {
    mesh                                "temp_needle.im"
    auto-create                         1
    att                                 "a.t_oil"
    anim                                "temp_needle.kin"
    att-parent                          "default"
  }
  dev-battery-amperage
  {
    kind                                "needle"
    mesh                                "elect_needle.im"
    auto-create                         1
    att                                 "a.tok_bat"
    att-parent                          "default"
    limits                              -150,150
    angles                              -0.712,0.745
    test-collisions                     0
  }
  dev-voltage
  {
    mesh                                "elect_needle.im"
    anim                                "vlt_ndl.kin"
    auto-create                         1
    att                                 "a.voltmeter_needle"
    test-collisions                     0
  }
  dev-amperage
  {
    mesh                                "elect_needle.im"
    anim                                "amp_ndl.kin"
    auto-create                         1
    att                                 "a.ampmeter_needle"
    test-collisions                     0
  }
  dev-damage
  {
    kind                                "needle"
    mesh                                "elect_needle.im"
    att                                 "a.pointer_damage"
    att-parent                          "default"
    auto-create                         1
    limits                              0,8
    angles                              0,1.43
    test-collisions                     0
  }
  als-green
  {
    mesh                                "a_g.im"
    att                                 "a.0"
    kind                                "light"
    test-collisions                     0
  }
  als-yellow
  {
    mesh                                "a_y.im"
    att                                 "a.1"
    kind                                "light"
    test-collisions                     0
  }
  als-redyellow
  {
    mesh                                "a_yr.im"
    att                                 "a.2"
    kind                                "light"
    test-collisions                     0
  }
  als-red
  {
    mesh                                "a_r.im"
    att                                 "a.3"
    kind                                "light"
    test-collisions                     0
  }
  als-white
  {
    mesh                                "a_w.im"
    att                                 "a.4"
    kind                                "light"
    test-collisions                     0
  }
  ept-brake
  {
    mesh                                "a_r.im"
    att                                 "a.lt10"
    kind                                "light"
    test-collisions                     0
  }
  ept-overlapping
  {
    mesh                                "a_y.im"
    att                                 "a.lt10"
    kind                                "light"
    test-collisions                     0
  }
  ept_release
  {
    mesh                                "a_g.im"
    att                                 "a.lt10"
    kind                                "light"
    test-collisions                     0
  }
  radio-cabel
  {
    mesh                                "vitoy.im"
    anim                                "vitoy.kin"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.transport"
  }
  ndl-3sl2m-minute
  {
    mesh                                "clock_minutes_needle.im"
    auto-create                         1
    att                                 "a.clock"
    att-parent                          "default"
    limits                              0,60
    angles                              0,6.283
    kind                                "needle"
    test-collisions                     0
  }
  ndl-3sl2m-hour
  {
    mesh                                "clock_hour_needle.im"
    auto-create                         1
    att                                 "a.clock"
    att-parent                          "default"
    limits                              0,24
    angles                              0,6.283
    kind                                "needle"
    test-collisions                     0
  }
  ndl-3sl2m-speed
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speedo_needle.im"
    att                                 "a.speedo_needle"
    angles                              0,4.089
    limits                              0,41.667
    att-parent                          "default"
    test-collisions                     0
  }
  odo-1
  {
    mesh                                "odo_wh.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.odometr1"
  }
  odo-2
  {
    mesh                                "odo_wh.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.odometr2"
  }
  odo-3
  {
    mesh                                "odo_wh.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.odometr3"
  }
  odo-4
  {
    mesh                                "odo_wh.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.odometr4"
  }
  odo-5
  {
    mesh                                "odo_wh.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.odometr5"
  }
  odo-6
  {
    mesh                                "odo_wh.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.odometr6"
  }
  odo-1-l
  {
    mesh                                "odo_wh_l.im"
    att-parent                          "default"
    att                                 "a.odometr1"
  }
  odo-2-l
  {
    mesh                                "odo_wh_l.im"
    att-parent                          "default"
    att                                 "a.odometr2"
  }
  odo-3-l
  {
    mesh                                "odo_wh_l.im"
    att-parent                          "default"
    att                                 "a.odometr3"
  }
  odo-4-l
  {
    mesh                                "odo_wh_l.im"
    att-parent                          "default"
    att                                 "a.odometr4"
  }
  odo-5-l
  {
    mesh                                "odo_wh_l.im"
    att-parent                          "default"
    att                                 "a.odometr5"
  }
  odo-6-l
  {
    mesh                                "odo_wh_l.im"
    att-parent                          "default"
    att                                 "a.odometr6"
  }
  sl2m-val
  {
    mesh                                "sl2m-val.im"
    anim                                "sl2m-val.kin"
    att                                 "a.sl2m-val"
    att-parent                          "default"
    auto-create                         1
  }
  lt-device-bright
  {
    mesh                                "podsvet.im"
    att                                 "a.cab_lamp"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  lt-device-dimly
  {
    mesh                                "podsvet2.im"
    att                                 "a.cab_lamp"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  lt-cabin-bright
  {
    mesh                                "light1.im"
    att                                 "a.cab_lamp"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  lt-cabin-dimly
  {
    mesh                                "light2.im"
    att                                 "a.cab_lamp"
    kind                                "light"
    att-parent                          "default"
    test-collisions                     0
  }
  assistant
  {
    auto-create                         1
    mesh                                "assistant.im"
    anim                                "assistant.kin"
    animation-loop-speed                1
    att                                 "a.pomoha"
    att-parent                          "default"
    mesh-asset                          <kuid2:361619:173122:3>
  }
  seat
  {
    mesh                                "sidenie.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.sidenie"
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
    test-collisions                     1
    mousespeed                          -4
  }
  wnd-right
  {
    kind                                "animated-lever"
    mesh                                "okno1.im"
    anim                                "okno1.kin"
    att                                 "a.okno1"
    auto-create                         1
    mousespeed                          0.5
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    test-collisions                     1
    mousemode                           "1"
    att-parent                          "default"
  }
  wnd-leaf-r
  {
    mesh                                "fort1.im"
    auto-create                         1
    kind                                "lever"
    att-parent                          "wnd-right"
    att                                 "a.fort1"
    angles                              0,-1.57
    notches                             0,1
    notchheight                         0,0
    test-collisions                     1
    mousemode                           "1"
  }
  wnd-left
  {
    kind                                "animated-lever"
    mesh                                "okno2.im"
    anim                                "okno2.kin"
    att                                 "a.okno2"
    auto-create                         1
    mousespeed                          0.5
    notches                             0,1
    notchheight                         0,0
    limits                              0,1
    test-collisions                     1
    mousemode                           "1"
    att-parent                          "default"
  }
  wnd-leaf-l
  {
    mesh                                "fort2.im"
    auto-create                         1
    kind                                "lever"
    att-parent                          "wnd-left"
    att                                 "a.fort2"
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
    test-collisions                     1
    mousemode                           "1"
  }
  wnd-arm-r
  {
    mesh                                "podlok1.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.podlok1"
    angles                              0,4.712
    notches                             0,0.33,0.659,1
    notchheight                         0,0,0,0
    limits                              0,1
    test-collisions                     1
    mousemode                           "1"
    att-parent                          "default"
  }
  wnd-arm-l
  {
    mesh                                "podlok2.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.podlok2"
    angles                              0,-4.712
    notches                             0,0.33,0.659,1
    notchheight                         0,0,0,0
    limits                              0,1
    test-collisions                     1
    mousemode                           "1"
    att-parent                          "default"
  }
  visor-right
  {
    kind                                "animated-lever"
    mesh                                "kozirek.IM"
    anim                                "kozirek.kin"
    att                                 "a.kozirek1"
    auto-create                         1
    mousespeed                          -0.5
    limits                              0,1
    test-collisions                     0
    mousemode                           "1"
    notchheight                         0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
  }
  visor-left
  {
    kind                                "animated-lever"
    mesh                                "kozirek2.IM"
    anim                                "kozirek2.kin"
    att                                 "a.kozirek2"
    auto-create                         1
    mousespeed                          -0.5
    limits                              0,1
    test-collisions                     0
    mousemode                           "1"
    notchheight                         0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
  }
  visor-right-collision
  {
    mesh                                "koz_coll.im"
    auto-create                         1
    kind                                "collision-proxy"
    att-parent                          "visor-right"
    att                                 "a.sht_coll"
    collision-parent                    "visor-right"
    opacity                             1
  }
  visor-left-collision
  {
    mesh                                "koz_coll.im"
    auto-create                         1
    kind                                "collision-proxy"
    att-parent                          "visor-left"
    att                                 "a.sht_coll"
    collision-parent                    "visor-left"
    opacity                             1
  }
  magazine
  {
    kind                                "animated-lever"
    mesh                                "book.IM"
    anim                                "book.kin"
    att                                 "a.book"
    auto-create                         1
    mousespeed                          0.5
    notches                             0,1
    notchheight                         0,0,0,0,0
    limits                              0,1
    test-collisions                     1
    mousemode                           "1"
  }
  epv-krishka
  {
    kind                                "animated-lever"
    mesh                                "krishka.IM"
    anim                                "krishka.kin"
    att                                 "a.krishka"
    auto-create                         1
    mousespeed                          0.5
    notches                             0,1
    notchheight                         0,0,0,0,0
    limits                              0,1
    test-collisions                     0
    mousemode                           "1"
  }
  epv-collision
  {
    mesh                                "krish_coll.im"
    auto-create                         1
    kind                                "collision-proxy"
    att-parent                          "epv-krishka"
    att                                 "a.collk"
    collision-parent                    "epv-krishka"
    opacity                             1
  }
  wiper-left
  {
    mesh                                "l_dvor.im"
    auto-create                         1
    att                                 "a.l_wip"
    att-parent                          "default"
    anim                                "l_dvor.kin"
  }
  wiper-right
  {
    mesh                                "r_dvor.im"
    auto-create                         1
    att                                 "a.r_wip"
    att-parent                          "default"
    anim                                "r_dvor.kin"
  }
  wg_front_r_cl
  {
    mesh                                "glwip_r.im"
    att                                 "a.cab_lamp"
    att-parent                          "default"
  }
  wg_front_l_cl
  {
    mesh                                "glwip_l.im"
    att                                 "a.cab_lamp"
    att-parent                          "default"
  }
  wg_front_r_wt
  {
    mesh                                "glrain_r.im"
    att                                 "a.cab_lamp"
    att-parent                          "default"
  }
  wg_front_l_wt
  {
    mesh                                "glrain_l.im"
    att                                 "a.cab_lamp"
    att-parent                          "default"
  }
  wg_front_frog_r
  {
    mesh                                "glpotn_r.im"
    att                                 "a.cab_lamp"
    att-parent                          "default"
  }
  wg_front_frog_l
  {
    mesh                                "glpotn_l.im"
    att                                 "a.cab_lamp"
    att-parent                          "default"
  }
  wg_right_wt
  {
    mesh                                "oknorain_r.im"
    att-parent                          "wnd-right"
    att                                 "a.fort1"
  }
  wg_left_wt
  {
    mesh                                "oknorain_l.im"
    att-parent                          "wnd-left"
    att                                 "a.fort2"
  }
  wg_leaf_r_wt
  {
    mesh                                "fortrain_r.im"
    att-parent                          "wnd-leaf-r"
    att                                 "a.fr"
  }
  wg_leaf_l_wt
  {
    mesh                                "fortrain_l.im"
    att-parent                          "wnd-leaf-l"
    att                                 "a.fl"
  }
  wg_right_frog
  {
    mesh                                "oknopotn_r.im"
    att-parent                          "wnd-right"
    att                                 "a.fort1"
  }
  wg_left_frog
  {
    mesh                                "oknopotn_l.im"
    att-parent                          "wnd-left"
    att                                 "a.fort2"
  }
  wg_leaf_r_frog
  {
    mesh                                "fortpotn_r.im"
    att-parent                          "wnd-leaf-r"
    att                                 "a.fr"
  }
  wg_leaf_l_frog
  {
    mesh                                "fortpotn_l.im"
    att-parent                          "wnd-leaf-l"
    att                                 "a.fl"
  }
  locobrakecylinder
  {
    mesh                                "cylinder.im"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.cab_lamp"
  }
  proxy-locobrake
  {
    mesh                                "needle_dummy.im"
    att                                 "a.locobrake_handle"
    test-collisions                     0
    auto-create                         1
  }
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
script-include-table
{
  0                                     <kuid2:151055:60006:7>
  1                                     <kuid2:151055:60049:1>
}
soundscript
{
  windr
  {
    repeat-delay                        0,0
    distance                            2.5,4
    attachment                          "a.okno1"
    nostartdelay                        1
    trigger                             "windrh"
    volume                              0.3
    sound
    {
      0                                 "sound/wind.wav"
    }
  }
  windl
  {
    repeat-delay                        0,0
    distance                            2.5,4
    attachment                          "a.okno2"
    nostartdelay                        1
    trigger                             "windlh"
    volume                              0.3
    sound
    {
      0                                 "sound/wind.wav"
    }
  }
  windlr
  {
    repeat-delay                        0,0
    distance                            1.5,2
    attachment                          "a.okno1"
    nostartdelay                        1
    trigger                             "windrl"
    volume                              0.3
    sound
    {
      0                                 "sound/windl.wav"
    }
  }
  windll
  {
    repeat-delay                        0,0
    distance                            1.5,2
    attachment                          "a.okno2"
    nostartdelay                        1
    trigger                             "windll"
    volume                              0.3
    sound
    {
      0                                 "sound/windl.wav"
    }
  }
  windmr
  {
    repeat-delay                        0,0
    distance                            2,3
    attachment                          "a.okno1"
    nostartdelay                        1
    trigger                             "windrm"
    volume                              0.3
    sound
    {
      0                                 "sound/windm.wav"
    }
  }
  windml
  {
    repeat-delay                        0,0
    distance                            2,3
    attachment                          "a.okno2"
    nostartdelay                        1
    trigger                             "windlm"
    volume                              0.3
    sound
    {
      0                                 "sound/windm.wav"
    }
  }
}
kuid-table
{
  sound-library                         <kuid2:361619:100019:2>
  base-library                          <kuid2:151055:60006:7>
  vbcf-core-library                     <kuid2:151055:60011:9>
  lsf-core-library                      <kuid:151055:60067>
  0                                     <kuid2:361619:173122:3>
  1                                     <kuid2:151055:60033:2>
  2                                     <kuid2:361619:100025:2>
  3                                     <kuid2:151055:60049:1>
}
Файлы:
brake_block_lever.im	2.4 kB
a_g.im	6.1 kB
blk_btn.im	1.3 kB
black_needle.im	3.5 kB
a_r.im	6.1 kB
blk_tumb.im	2.3 kB
bswitch.im	3.6 kB
a_y.im	6.1 kB
book.kin	6.7 kB
a_yr.im	6.1 kB
blk_tumb_drk.im	2.3 kB
amp_ndl.kin	4.5 kB
a_w.im	6.1 kB
book.im	13.4 kB
cab.kin	35.4 kB
caba.texture.txt	27 B
dam_needle.im	1.8 kB
dm62cab_empty.gs	76 B
controller.texture.txt	33 B
cabb.texture.txt	27 B
elect_needle.im	1.8 kB
clock_minutes_needle.im	2.3 kB
clock_hour_needle.im	1.8 kB
epk_key.im	7.6 kB
extra2.im	20.7 kB
fort1.im	8.8 kB
fortpotn_l.im	2.0 kB
fortpotn_r.im	2.0 kB
fortrain_l.im	2.0 kB
glass.texture.txt	28 B
cylinder.im	1.9 kB
elect_needle2.im	1.8 kB
extra1.im	120.3 kB
fort2.im	8.8 kB
glass.jpg	56.4 kB
glpotn1-glpotn1.texture.txt	49 B
fortrain_r.im	2.0 kB
glpotn_r.im	4.6 kB
glpotn_l.im	4.6 kB
glrain1-glrain1.texture.txt	49 B
controller.jpg	724.1 kB
glrain2-glrain2.texture.txt	49 B
grn_lt.im	10.7 kB
handbrake.im	20.3 kB
horn_switch.im	7.9 kB
glwip_r.im	4.6 kB
glrain_r.im	4.6 kB
koz_coll.im	492 B
horn_switch2.im	7.9 kB
glwip_l.im	4.6 kB
koz_coll2.im	492 B
kozirek.im	5.6 kB
kozirek.kin	3.5 kB
kozirek2.im	6.1 kB
kozirek2.kin	3.5 kB
krish_coll.im	1.2 kB
krishka.kin	2.0 kB
krishka.im	11.5 kB
l_dvor.im	12.0 kB
l_dvor.kin	3.7 kB
lamp_lt.texture.txt	30 B
krany.texture.txt	28 B
lamp_lt.jpg	124.7 kB
glrain_l.im	4.6 kB
lampek-lampek.texture.txt	47 B
krany.jpg	702.3 kB
lampki.texture.txt	29 B
light2.im	4.1 kB
light_sword-light_sword.texture.txt	57 B
cab.im	2.3 MB
light_sword.tga	128.0 kB
linz-alsn-linz-alsn.texture.txt	53 B
likvid.im	3.3 kB
light1.im	4.1 kB
lampki.jpg	440.1 kB
linz-alsn.tga	256.0 kB
luch.im	1.9 kB
mega2.texture.txt	28 B
lampek.tga	512.0 kB
mirror2_n-mirror2_n.texture.txt	78 B
mirror2-mirror2.texture.txt	49 B
mega_tex.texture.txt	31 B
mirror2_n.tga	128.0 kB
mirror2.tga	128.0 kB
caba.jpg	3.1 MB
mega2.jpg	711.4 kB
cabb.jpg	3.6 MB
misc.jpg	976.6 kB
misc.texture.txt	27 B
needle_dummy.im	578 B
odo_wh.im	2.4 kB
odo_wh_l.im	2.4 kB
okno1.kin	2.7 kB
okno2.kin	2.7 kB
oknopotn_l.im	532 B
oknopotn_r.im	532 B
oknorain_r.im	532 B
p_needle.im	638 B
oknorain_l.im	532 B
p_needle_lt.im	642 B
pedal.im	1.3 kB
p_needle.kin	1.3 kB
podlok1.im	5.4 kB
podsvet.im	23.4 kB
okno1.im	21.5 kB
prop_lt.im	2.6 kB
podsvet2.im	23.4 kB
okno.texture.txt	27 B
okno2.im	21.5 kB
provoda.jpg	224.5 kB
provoda.texture.txt	30 B
r_conup.im	1.4 kB
podlok2.im	5.4 kB
pss_green.im	10.3 kB
r_dvor.im	12.0 kB
r_condn.im	1.4 kB
r_interface.im	30.3 kB
r_dvor.kin	3.7 kB
okno.jpg	169.2 kB
r_krishka.im	7.3 kB
r_voldn.im	1.4 kB
r_lt_switch.im	1.4 kB
r_switch.im	1.4 kB
r_volup.im	1.4 kB
raciya_disp_lt.jpg	65.0 kB
raciya_disp_lt.texture.txt	37 B
raciya_disp_off.jpg	43.8 kB
raciya_disp_off.texture.txt	38 B
raciya_disp_on.texture.txt	37 B
rb_btn.im	8.6 kB
red_lt.im	10.7 kB
raciya_disp_on.jpg	52.0 kB
red_needle.im	3.4 kB
redukt.im	6.4 kB
reverser_lever.im	14.0 kB
rt_button.texture.txt	32 B
scales2.texture.txt	30 B
sl2m-val.im	20.6 kB
sl2m-val.kin	5.1 kB
rt_button_lt.texture.txt	35 B
sidushka.jpg	107.2 kB
rt_button.jpg	157.4 kB
sidenie.im	8.0 kB
rt_button_lt.jpg	180.9 kB
mega_tex.jpg	2.0 MB
slm2.jpg	561.0 kB
slm2.texture.txt	27 B
glrain1.tga	2.0 MB
sound
sound / avt_on.wav	35.6 kB
sound / avt_off.wav	42.2 kB
sound / butt_in.wav	11.8 kB
sound / butt_in2.wav	12.1 kB
sound / butt_in3.wav	11.5 kB
sound / butt_out.wav	10.8 kB
sound / fort_open.wav	14.1 kB
sound / fort_close.wav	6.3 kB
sound / locobrake.wav	8.5 kB
sound / butt_out2.wav	11.0 kB
sound / msw.wav	10.7 kB
sound / seat_close.wav	27.5 kB
sound / pedal.wav	27.6 kB
sound / seat_open.wav	12.2 kB
sound / shtorka.wav	1.2 kB
sound / skb_in.wav	5.1 kB
sound / skb_out.wav	9.4 kB
sound / cabin.txt	2.8 kB
sound / butt_out3.wav	10.5 kB
sound / psw.wav	9.5 kB
sound / reverser.wav	27.7 kB
sound / controller.wav	16.4 kB
sound / wind_close.wav	20.7 kB
sound / epvkey.wav	16.5 kB
sound / trainbrake.wav	17.5 kB
sound / wind_open.wav	23.1 kB
sound / windl.wav	1.0 MB
sound / windm.wav	1.0 MB
sound / wind.wav	1.0 MB
stol.texture.txt	27 B
speedo_needle.im	2.0 kB
scales2.jpg	903.4 kB
strelki.jpg	50.0 kB
tabs.texture.txt	27 B
temp_needle.im	634 B
temp_needle.kin	8.7 kB
trainbrake.im	20.5 kB
throttle_ring.im	47.5 kB
thumbnail.jpg	47.5 kB
trainbrake2.im	25.6 kB
transport.texture.txt	32 B
vitoy.im	213.9 kB
strelki.texture.txt	30 B
vlt_ndl.kin	7.3 kB
wht_tumb_drk.im	3.8 kB
wipsw.im	2.2 kB
wht_tumb.im	3.8 kB
vitoy.kin	72.9 kB
transport.jpg	555.6 kB
tabs.jpg	776.4 kB
glrain2.tga	2.0 MB
glpotn1.tga	2.0 MB
stol.jpg	1.5 MB
Общий объём файлов:	31.8 MB
Версии элемента:
kuid	kind	name	build	date	size
<kuid2:361619:100202:3>	interior	кабина М62-1867	3.7	7.01.2018 20:56:09	25.3 MB
<kuid2:361619:100202:2>	interior	кабина М62-1867	3.8	11.06.2016 23:26:31	24.3 MB
Зависимости:
kuid	author	kind	name	build	date	size
<kuid2:151055:60006:8>	Эрендир	library	ДМ62 Библиотека скриптов	3.7	22.04.2023 21:05:17	81.6 kB
<kuid2:151055:60011:12>	Эрендир	library	Vehicle Base Script Framework	4.6	22.09.2025 19:50:54	2.6 MB
<kuid2:151055:60033:2>	Эрендир	controlset	Клавиатура для дизельных локомотивов	3.7	7.01.2018 16:41:22	44.2 kB
<kuid2:151055:60049:6>	Эрендир	library	Universal ALS	5.4	25.09.2025 0:20:11	50.3 kB
<kuid2:151055:60067:1>	Эрендир	library	Locomotive Script Framework	5.4	25.09.2025 0:20:43	2.7 MB
<kuid2:361619:100019:2>	DUMONT	hornsound	Библиотека звуков кабины	3.7	22.04.2023 21:05:17	1.8 MB
<kuid2:361619:100025:3>	DUMONT	mesh	Дизельное помещение М62 14Д40	3.7	8.01.2018 14:56:01	2.1 MB
<kuid2:361619:173122:3>	DUMONT	mesh	ДМ62 Помошник машиниста	3.7	22.04.2023 21:05:17	3.1 MB
Всего связей: 8, неизвестных связей: 0
Зависимые элементы:
kuid	author	kind	name	build	date	size
<kuid:229030:100233>	Pendolino_Master	traincar	[RZD] M62-1856	3.7	4.11.2021 11:43:50	12.9 MB
<kuid:432925:1174>	#432925	traincar	М62-1867	3.7	27.09.2025 6:57:24	13.3 MB
<kuid2:432925:1174:1>	#432925	traincar	М62-1867	3.7	27.09.2025 6:57:23	13.3 MB
<kuid2:432925:1174:2>	#432925	traincar	М62-1867	3.7	11.01.2018 2:19:35	13.4 MB
<kuid2:432925:1174:3>	#432925	traincar	М62-1867	3.7	19.05.2020 21:40:52	13.4 MB