<kuid:359354:105880> ERSX SD40-T2 cab

Тип: Кабина
Опубликовано: 12.01.2021 19:07:06
Скачиваний: 75
Размер: 4.5 MB

Скачать

Mesh by MSP.
Retextured by BTVFD
SD40-T2 cab.
This cab has been made specifically to be used with the EAGLE RIVER SD40-T2 locomotives that I have created. This cab is not 100% accurate, but I think it is a reasonable representation, and I hope that folks will enjoy it.

Model created in Blender 2.69.
Textures created in Photoshop 5.5.

This cab is still a work in progress. Future updates will add to what I have already done, and hopefully make it better and more complete for everyone.

Known issues:

1)- not all of the knobs / dials / lights are functional / animated. There are some things which just don't function as well as they could, or are simply decorative.
2)- clipping issues. The cab sunshades will 'flip' forwards and backwards, and sometimes this will allow you to have them positioned outside of the glass window of the cab. I know that this is not realistic, but I still have not figured out how to allow it to have the full degree of motion I want for when you rotate them over the operators positions, but with some sort of 'blocking boundary box' when they are trying to clip through the windows and cab walls. Again, this simply may not be possible within the current confines of the game, but if it is, it will be something that I can correct in the future.
3)- Sand lever is decorative only. You can push down on the sanding lever, but it does not actually cause the sanding to function. I have dug through the CCG and tried to figure out how to make this link, but I just can't get it worked out right now. So... for now you'll still need to use the keyboard (and your imagination).

There are certianly other things which can be improved upon, and those will be for future updates as time and inclination allow.

config.txt:

kuid                                    <kuid:359354:105880>
username                                "ERSX SD40-T2  cab"
trainz-build                            3.5
category-class                          "ZI"
kind                                    "interior"
cameradefault                           0
category-era                            "1960s;1970s;1980s;1990s;2000s;2010s"
category-region                         "US"
description                             "Mesh by MSP.
Retextured by BTVFD
 SD40-T2 cab.
This cab has been made specifically to be used with the EAGLE RIVER SD40-T2 locomotives that I have created.  This cab is not 100% accurate, but I think it is a reasonable representation, and I hope that folks will enjoy it.

Model created in Blender 2.69.
Textures created in Photoshop 5.5.

This cab is still a work in progress.  Future updates will add to what I have already done, and hopefully make it better and more complete for everyone.

Known issues:

1)- not all of the knobs / dials / lights are functional / animated.  There are some things which just don't function as well as they could, or are simply decorative.  
2)- clipping issues.  The cab sunshades will 'flip' forwards and backwards, and sometimes this will allow you to have them positioned outside of the glass window of the cab.  I know that this is not realistic, but I still have not figured out how to allow it to have the full degree of motion I want for when you rotate them over the operators positions, but with some sort of 'blocking boundary box' when they are trying to clip through the windows and cab walls.  Again, this simply may not be possible within the current confines of the game, but if it is, it will be something that I can correct in the future.
3)- Sand lever is decorative only.  You can push down on the sanding lever, but it does not actually cause the sanding to function.  I have dug through the CCG and tried to figure out how to make this link, but I just can't get it worked out right now.  So... for now you'll still need to use the keyboard (and your imagination).

There are certianly other things which can be improved upon, and those will be for future updates as time and inclination allow."
license                                 "Open GL.  All rights reserved.  Any re-paints may be distributed to the Auran DLS.  Distribution via other outlets to be by original author's consent only."
mesh-table
{
  sd_cab
  {
    mesh                                "cab/SD_cab.im"
    auto-create                         1
  }
  reverser_lever
  {
    mesh                                "cab/reverser_lever.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              0.55,-0.55
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "sd_cab"
  }
  horn
  {
    mesh                                "cab/horn.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.horn"
    limits                              0,1
    angles                              0,-0.6
    notches                             0,1
    notchheight                         3,3
    radius                              0.16
    att-parent                          "sd_cab"
    mousespeed                          -2
  }
  throttle_lever
  {
    mesh                                "cab/throttle_lever.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.throttle_lever"
    limits                              0,8
    angles                              -1.415,0
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.35
    att-parent                          "sd_cab"
  }
  trainbrake_lever
  {
    mesh                                "cab/train_brake_lever.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.train_brake_lever"
    limits                              0,4
    angles                              0,-2.4
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    radius                              0.15
    att-parent                          "sd_cab"
  }
  independantbrake_lever
  {
    mesh                                "cab/ind_brake_lever.im"
    kind                                "lever"
    att                                 "a.ind_brake_lever"
    limits                              0,32
    angles                              0,-2.1
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,1
    radius                              0.15
    att-parent                          "sd_cab"
    auto-create                         1
  }
  speedo_needle
  {
    mesh                                "cab/speedo_needle.im"
    kind                                "needle"
    auto-create                         1
    att                                 "a.speedo"
    limits                              0,40
    att-parent                          "sd_cab"
  }
  ampmeter_needle
  {
    mesh                                "cab/ampmeter_needle.im"
    kind                                "needle"
    auto-create                         1
    att                                 "a.ampmeter"
    limits                              0,1000
    angles                              0,-1.9
    att-parent                          "sd_cab"
  }
  bploco_equaliser
  {
    mesh                                "cab/whitepress_needle.im"
    kind                                "needle"
    att                                 "a.equaliser_pressure"
    limits                              0,800
    att-parent                          "sd_cab"
    auto-create                         1
  }
  bptrainbrakepipe_needle
  {
    mesh                                "cab/whitepress_needle.im"
    kind                                "needle"
    auto-create                         1
    att                                 "a.brake_pipe_pressure"
    limits                              1,800
    att-parent                          "sd_cab"
  }
  cond_seat
  {
    mesh                                "cab/cond_seat.im"
    att                                 "a.chair1"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0.1,8
    radius                              0.25
    mousespeed                          1
  }
  sand_lever
  {
    mesh                                "cab/sand_lever.im"
    att                                 "a.switch0"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    angles                              0,-0.75
    notches                             0,0.5,1
    notchheight                         1,1,1
  }
  engineers_seat
  {
    mesh                                "cab/eng_seat.im"
    att                                 "a.chair0"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    radius                              0.25
    angles                              -0.5,8
    mousespeed                          1
  }
  cond_seat_arm1
  {
    mesh                                "cab/cond_arm1.im"
    att                                 "a.cond_arm1"
    att-parent                          "cond_seat"
    auto-create                         1
    kind                                "lever"
    angles                              0,-1.5
    notches                             0,0.5,1
    notchheight                         1,1,1
  }
  sunvisor1
  {
    mesh                                "cab/sun_visor3.im"
    att                                 "a.sunvisor0"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0,3
    radius                              0.25
    mousespeed                          1
  }
  sunvisor2
  {
    mesh                                "cab/sun_visor2.im"
    att                                 "a.sunvisor1"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0,3
    radius                              0.25
    mousespeed                          1
  }
  cond_seat_arm2
  {
    mesh                                "cab/cond_arm2.im"
    att                                 "a.cond_arm2"
    att-parent                          "cond_seat"
    auto-create                         1
    angles                              0,-1.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    kind                                "lever"
  }
  eng_arm1
  {
    mesh                                "cab/eng_arm1.im"
    att                                 "a.eng_arm1"
    att-parent                          "engineers_seat"
    auto-create                         1
    angles                              0,-1.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    kind                                "lever"
  }
  eng_arm2
  {
    mesh                                "cab/eng_arm2.im"
    att                                 "a.eng_arm2"
    att-parent                          "engineers_seat"
    auto-create                         1
    angles                              -1.5,0
    notches                             0,0.5,1
    notchheight                         1,1,1
    kind                                "lever"
  }
  visor_flap1
  {
    mesh                                "cab/visor_flap1.im"
    att                                 "a.visor_flap3"
    att-parent                          "sunvisor1"
    auto-create                         1
    angles                              1.5,-1.5
    notches                             0,0.125,0.25,0.325,0.5,0.625,0.75,0.825,1
    notchheight                         1,1,1,1,1,1,1,1,1
    kind                                "lever"
  }
  visor_flap2
  {
    mesh                                "cab/visor_flap2.im"
    att                                 "a.visor_flap2"
    att-parent                          "sunvisor2"
    auto-create                         1
    angles                              1.5,-1.5
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.825,1
    notchheight                         1,1,1,1,1,1,1,1,1
    kind                                "lever"
  }
  sunvisor3
  {
    mesh                                "cab/sun_visor3.im"
    att                                 "a.sunvisor2"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0,3
    radius                              0.25
    mousespeed                          1
  }
  sunvisor4
  {
    mesh                                "cab/sun_visor4.im"
    att                                 "a.sunvisor3"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0,2
    radius                              0.25
    mousespeed                          1
  }
  sunvisor5
  {
    mesh                                "cab/sun_visor5.im"
    att                                 "a.sunvisor4"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0,-2
    radius                              0.25
    mousespeed                          1
  }
  visor_flap3
  {
    mesh                                "cab/visor_flap1.im"
    att                                 "a.visor_flap3"
    att-parent                          "sunvisor3"
    auto-create                         1
    angles                              1.5,-1.5
    notches                             0,0.125,0.25,0.325,0.5,0.625,0.75,0.825,1
    notchheight                         1,1,1,1,1,1,1,1,1
    kind                                "lever"
  }
  visor_flap4
  {
    mesh                                "cab/visor_flap1.im"
    att                                 "a.visor_flap4"
    att-parent                          "sunvisor4"
    auto-create                         1
    angles                              0,1.5
    notches                             0,0.125,0.25,0.325,0.5,0.625,0.75,0.825,1
    notchheight                         1,1,1,1,1,1,1,1,1
    kind                                "lever"
  }
  visor_flap5
  {
    mesh                                "cab/visor_flap2.im"
    att                                 "a.visor_flap5"
    att-parent                          "sunvisor5"
    auto-create                         1
    angles                              0,1.5
    notches                             0,0.125,0.25,0.325,0.5,0.625,0.75,0.825,1
    notchheight                         1,1,1,1,1,1,1,1,1
    kind                                "lever"
  }
  bplocomain_needle
  {
    mesh                                "cab/redpress_needle.im"
    kind                                "needle"
    att                                 "a.main_res_pressure"
    limits                              0,800
    att-parent                          "sd_cab"
    auto-create                         1
  }
  bptrainbrakecylinder_needle
  {
    mesh                                "cab/redpress_needle.im"
    kind                                "needle"
    auto-create                         1
    att                                 "a.brake_cyl_pressure"
    limits                              0,800
    att-parent                          "sd_cab"
  }
  dynamicbrake_lever
  {
    mesh                                "cab/throttle_lever.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.dynamic_brake"
    limits                              0,3
    angles                              0,-1.55
    notches                             0,1
    notchheight                         0.1,1
    radius                              0.35
    att-parent                          "sd_cab"
  }
  cond_seat2
  {
    mesh                                "cab/cond_seat.im"
    att                                 "a.chair2"
    att-parent                          "sd_cab"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0.1,8
    radius                              0.25
    mousespeed                          1
  }
  cond_seat2_arm1
  {
    mesh                                "cab/cond_arm1.im"
    att                                 "a.cond_arm1"
    att-parent                          "cond_seat2"
    auto-create                         1
    kind                                "lever"
    angles                              0,-1.5
    notches                             0,0.5,1
    notchheight                         1,1,1
  }
  cond_seat2_arm2
  {
    mesh                                "cab/cond_arm2.im"
    att                                 "a.cond_arm2"
    att-parent                          "cond_seat2"
    auto-create                         1
    angles                              0,-1.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    kind                                "lever"
  }
}
cameralist
{
  camera0                               -1.245,-0.425,0.545,0,-0.105
  camera1                               -1.195,0.015,0.745,0.215,-0.34
  camera2                               0.09,-0.225,0.745,-0.115,0
  camera3                               1.245,0.3,0.745,-0.25,-0.105
  camera4                               1.245,-0.045,0.545,0.015,-0.055
  camera5                               0.065,-0.6,0.745,-2.915,-0.025
}
thumbnails
{
  0
  {
    image                               "sd40 cab.jpg"
    width                               280
    height                              140
  }
}
kuid-table
{
}

Файлы:

cab
cab / alpha-alpha.texture.txt	45 B
cab / cab main.texture.txt	31 B
cab / ampmeter_needle.im	2.3 kB
cab / cond_arm2.im	3.7 kB
cab / cond_arm1.im	3.7 kB
cab / eng_arm1.im	3.7 kB
cab / eng_arm2.im	3.7 kB
cab / redpress_needle.im	2.3 kB
cab / sand_lever.im	2.5 kB
cab / speedo_needle.im	1.6 kB
cab / reverser_lever.im	5.6 kB
cab / horn.im	8.4 kB
cab / ind_brake_lever.im	9.3 kB
cab / sun_visor1.im	5.9 kB
cab / cond_seat.im	17.9 kB
cab / sun_visor3.im	5.9 kB
cab / eng_seat.im	17.9 kB
cab / sun_visor2.im	7.1 kB
cab / sun_visor4.im	5.9 kB
cab / visor_flap1.im	3.6 kB
cab / visor_flap2.im	3.6 kB
cab / whitepress_needle.im	2.3 kB
cab / sun_visor5.im	5.9 kB
cab / throttle_lever.im	6.0 kB
cab / train_brake_lever.im	6.4 kB
cab / sd_cab.im	1.9 MB
cab / alpha.tga	4.0 MB
cab / cab main.tga	12.0 MB
sd40 cab.jpg	53.5 kB
Общий объём файлов:	18.1 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:359354:105880>	interior	ERSX SD40-T2 cab	3.5	12.01.2021 19:07:06	4.5 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:359354:105879>	#359354	traincar	ERSX SD40T2	3.5	12.01.2021 22:46:58	6.6 MB