<kuid2:359354:100499:1> SP 261 REPEATER AIR CAR for the Southern Pacific Railroad.

Тип: traincar
Опубликовано: 20.10.2021 1:16:44
Скачиваний: 10
Размер: 2.9 MB

Скачать

Blender mesh by MSP.
Textures by BTVFD
REPEATER AIR CAR for the Southern Pacific Railroad.
Reporting marks SP 261
Southern Pacific INFO FACT:
The repeater air car is utilized to increase efficiency of train air brakes on long trains and during cold weather. The purpose of repeater relay equipment is to accept pneumatic signals from the brake pipe of forward portion of a train, and by relay action, produce a corresponding response in the brake pipe of the rear section of the train.

The repeater relay car has the ability to produce faster train charging time, reduce or eliminate brake pipe pressure gradient, more uniform braking forces, and faster brake application and release times.

A. Procedure for adding Repeater Air Car to a train to use Repeater Car Air Equipment.

1.Place as near to center of train as makeup will permit.

2.The RAC car is operational in either direction. The front brake pipe must be coupled to the portion of the train to which the road engine is attached. The rear brake pipe must be coupled to the other end of the train.
The angle cock on the unused brake pipe on each end of the car must be closed.

3.Where repeater air car is positioned in train and front and rear brake pipes have properly connected and opened, then close the brake pipe bypass cock No.1 and open the two repeater relay cut-out cocks Nos.2 and 3, all located inside of car.

WARNING: DO NOT HUMP!

All dependancies are either built-in, come off the DLS, or can be found at RRMods.

config.txt:

username                                "SP 261   REPEATER AIR CAR  for the Southern Pacific Railroad."
enginespec                              <kuid:-1:42004203>
enginesound                             <kuid:359354:100490>
engine                                  0
mass                                    112000
kind                                    "traincar"
fonts                                   0
category-class                          "AL"
description                             "Blender mesh by MSP.
Textures by BTVFD
   REPEATER AIR CAR  for the Southern Pacific Railroad.
Reporting marks SP 261
Southern Pacific  INFO FACT:
The repeater air car is utilized to increase efficiency of train air brakes on long trains and during cold weather. The purpose of repeater relay equipment is to accept pneumatic signals from the brake pipe of forward portion of a train, and by relay action, produce a corresponding response in the brake pipe of the rear section of the train.
 
  The repeater relay car has the ability to produce faster train charging time, reduce or eliminate brake pipe pressure gradient, more uniform braking forces, and faster brake application and release times.
 
  A. Procedure for adding Repeater Air Car to a train to use Repeater Car Air Equipment.
 
  1.Place as near to center of train as makeup will permit.

2.The RAC car is operational in either direction. The front brake pipe must be coupled to the portion of the train to which the road engine is attached. The rear brake pipe must be coupled to the other end of the train.
The angle cock on the unused brake pipe on each end of the car must be closed.

3.Where repeater air car is positioned in train and front and rear brake pipes have properly connected and opened, then close the brake pipe bypass cock No.1 and open the two repeater relay cut-out cocks Nos.2 and 3, all located inside of car.

WARNING: DO NOT HUMP!

All dependancies are either built-in, come off the DLS, or can be found at RRMods."
author                                  "BTVFD"
license                                 "All rights reserved 2012. 
No reskins of this car allowed without permission  from BTVFD"
category-region                         "US"
category-era                            "1960s;1970s;1980s;1990s;2000s"
trainz-build                            2.9
mesh-table
{
  default
  {
    mesh                                "body/60ft_boxcar.lm"
    auto-create                         1
  }
  shadow
  {
    mesh                                "shadow/60ft_boxcar_shadow.im"
  }
}
obsolete-table
{
}
bogeys
{
  0
  {
    bogey                               <kuid2:45324:50203:2>
    reversed                            0
  }
}
thumbnails
{
  0
  {
    image                               "RAC ART/btvfd_20120528_0024.jpg"
    width                               240
    height                              180
  }
}
kuid                                    <kuid2:359354:100499:1>
kuid-table
{
  1                                     <kuid:-1:42004203>
  2                                     <kuid:359354:100490>
  8                                     <kuid2:45324:50203:2>
}

Файлы:

body
body / 60ft_boxcar.lm.txt	294 B
body / coupler_tex.bmp	192.1 kB
body / coupler_tex.texture.txt	34 B
body / shadow1.texture.txt	30 B
body / shadow1.tga	128.0 kB
body / shadowblacktexture.texture.txt	41 B
body / shadowblacktexture.tga	1.0 kB
body / sp_261.texture.txt	29 B
body / sp_261.tga	3.0 MB
body / sp_699229.texture.txt	32 B
body / sp_699229.tga	3.0 MB
body / sp_b7050_boxcar1.im	461.2 kB
body / sp_b7050_boxcar2.im	172.0 kB
body / sp_b7050_boxcar3.im	33.2 kB
body / sp_b7050_boxcar_shadow.im	4.0 kB
rac art
rac art / btvfd_20120528_0024.jpg	1.2 MB
shadow
shadow / 60ft_boxcar_shadow.im	7.6 kB
shadow / black.tga	795 B
shadow / shadowblacktexture.texture.txt	41 B
shadow / shadowblacktexture.tga	1.0 kB
Общий объём файлов:	8.2 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:359354:100499:1>	traincar	SP 261 REPEATER AIR CAR for the Southern Pacific Railroad.	2.9	20.10.2021 1:16:44	2.9 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-1:42004203>	#-1	engine	Типовой локомотив	0	19.01.2024 2:38:53	4.1 kB
<kuid2:45324:50203:9>	#45324	bogey	S-2 Truck 100 ton 263,000 lbs 6.5in × 12in 36in wheels	3.6	20.04.2023 12:22:03	594.5 kB
<kuid:359354:100490>	#359354	enginesound	SP REPEATER AIR CAR (RAC) Engine sounds	2.9	23.07.2020 21:06:54	2.0 MB
Всего связей: 3, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет