<kuid2:354694:840002:4> Кабина ЧС4т-351 легкая v2

Тип: Кабина
Опубликовано: 18.04.2023 23:10:35
Скачиваний: 396
Размер: 31.0 MB

Скачать

Отличия от многофункциональной кабины:
1. При экстренном торможении не выбивает ГВ
2. САУТ не реагирует на превышение скорости - позиции не сбрасываются.
3. Возможность покидать локомотив - обзор статической камерой (клавиша 4), при этом управлять из клавиатуры, параметры не пропадают, кроме случаев смены показаний светофоров и реакции САУТ. Переход в другую машину, для возобновления всех функций по возвращении необходимо заново включить ГВ и ЭПК.
4. Не выбивает ГВ при перегрузке.
5. Управления DCC.

config.txt:

kuid                                    <kuid2:354694:840002:4>
category-class                          "ZI"
script                                  "chs_cab.gs"
class                                   "chs_cab"
cameradefault                           1
kind                                    "interior"
username                                "Cab ChS4t-351 Easy v2"
username-ru                             "Кабина ЧС4т-351 легкая v2"
category-region                         "RU"
category-era                            "2000s"
trainz-build                            4.3
interior-controls-type                  "full"
description                             "Differences from the multifunction cabin:
1. Emergency braking do not knock GW
2. SAUT not respond to speeding - position not reset.
3. The ability to leave the locomotive - an overview of the static camera key (4), with control of the keyboard settings are not lost, except in cases of traffic lights changing indications and reactions SOUTH. Go to another machine to restore all functions to return to re-enable the GV and EPA.
4. Do not knock GW overload.
5. Management DCC."
description-ru                          "Отличия от многофункциональной кабины:
1. При экстренном торможении не выбивает ГВ
2. САУТ не реагирует на превышение скорости - позиции не сбрасываются.
3. Возможность покидать локомотив - обзор статической камерой (клавиша 4), при этом управлять из клавиатуры, параметры не пропадают, кроме случаев смены показаний светофоров и реакции САУТ. Переход в другую машину, для возобновления всех функций по возвращении необходимо заново включить ГВ и ЭПК.
4. Не выбивает ГВ при перегрузке.
5. Управления DCC."
license                                 "free for non commercial use"
mesh-table
{
  default
  {
    mesh                                "chs4t_cab.IM"
    auto-create                         1
    light                               1
    effects
    {
      speed
      {
        kind                            "name"
        att                             "a.saut5"
        name                            "speed"
        fontsize                        0.0128
        fontcolor                       150,280,200
      }
      maxspeed
      {
        kind                            "name"
        att                             "a.saut4"
        name                            "maxspeed"
        fontsize                        0.0128
        fontcolor                       400,60,50
      }
      signaldist
      {
        kind                            "name"
        att                             "a.saut2"
        name                            "signaldist"
        fontsize                        0.0128
        fontcolor                       400,60,50
      }
    }
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "revers.im"
    auto-create                         1
    att                                 "a.revers"
    limits                              0,2
    angles                              0,1.25
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.14
  }
  controller
  {
    kind                                "pulllever"
    mesh                                "traction.im"
    auto-create                         1
    att                                 "a.traction"
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0.001,0.001,0.001,0.001,0.001
    radius                              0.08
    mousespeed                          0.55
    angles                              -1.1,1.1
    limits                              -2,2
  }
  ups
  {
    kind                                "needle"
    mesh                                "strelka.IM"
    auto-create                         1
    att                                 "a.needle3"
    angles                              0,5.5
    limits                              0,32
  }
  okno_r
  {
    mesh                                "win_r.IM"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.win_r"
    limits                              0,1
    angles                              0,0.65
    value                               1
    mousespeed                          -1
  }
  okno_l
  {
    mesh                                "win_l.IM"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.win_l"
    limits                              0,1
    angles                              0,0.65
    value                               1
    mousespeed                          -1
  }
  trainbrake_lever2
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "bigtorm.IM"
    att                                 "a.bigtorm"
    limits                              0,100
    angles                              0,-2
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0.001,0.001,0.001,0.001,0.001,0.001,0.001
    radius                              0.15
    mousespeed                          -1
  }
  independantbrake_lever2
  {
    mesh                                "smalltorm.IM"
    att                                 "a.smalltorm"
    auto-create                         1
    kind                                "lever"
    angles                              0,-2.2
    limits                              0,100
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0.001,0.001,0.001,0.001,0.001
    radius                              0.15
    test-collisions                     1
    mousespeed                          -1
  }
  reostat_torm
  {
    kind                                "pulllever"
    mesh                                "skor.IM"
    att                                 "a.skor"
    limits                              -100,100
    angles                              -0.2618,0.2618
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
  }
  sl2m
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speedo_needle.IM"
    att                                 "a.speedo_needle"
    limits                              0,48
    angles                              0,4.18
  }
  bplocomain_needle
  {
    mesh                                "needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain_needle"
    limits                              0,1600
    angles                              0,4.6
  }
  bptrainbrakepipe_needle
  {
    mesh                                "needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakepipe_needle"
    limits                              0,1600
    angles                              0,7.2
  }
  bptrainbrakecylinder_needle
  {
    mesh                                "needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakecylinder_needle"
    limits                              0,1600
    angles                              0.1,7.4
  }
  bploco_equaliser
  {
    mesh                                "needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain"
    limits                              0,1600
    angles                              0,7.2
  }
  bplocomain_needle1
  {
    mesh                                "needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain_needle1"
    limits                              0,1600
    angles                              0,4.6
  }
  pantograph_lever2
  {
    kind                                "lever"
    mesh                                "pantograph.IM"
    att                                 "a.pantograph"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          10
  }
  knopka_rb
  {
    mesh                                "pbz.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pbz"
    limits                              0,1
    angles                              0,0.006
    mousespeed                          15
    value                               1
  }
  siden
  {
    kind                                "lever"
    mesh                                "siden.IM"
    att                                 "a.siden"
    auto-create                         1
    limits                              0,1
    angles                              0,-1.4
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          -1
  }
  kv_ted
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.ampmeter_needle"
    limits                              0,1000
    angles                              0,4
  }
  a_ted1
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needle2"
    limits                              0,1000
    angles                              0,4.3
  }
  a_ted2
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.napryagenie"
    limits                              0,1000
    angles                              0,4.3
  }
  kv_set
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needle4"
    limits                              0,1000
    angles                              0,2.4
  }
  a_stab
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needle6"
    limits                              0,1000
    angles                              0,3
  }
  a_bat
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needle7"
    limits                              0,1000
    angles                              0,4
  }
  v_bat
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needle8"
    limits                              0,1500
    angles                              0,2.4
  }
  v_torm
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needle9"
    limits                              0,1000
    angles                              0,3
  }
  epk
  {
    mesh                                "kluch-epk.IM"
    att                                 "a.kluch-epk"
    auto-create                         1
    kind                                "lever"
    angles                              0,2
    limits                              0,1
    att-parent                          "default"
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0.15
    mousespeed                          -100
  }
  als_0
  {
    mesh                                "a_g.im"
    att                                 "a.0"
    kind                                "light"
    light                               1
  }
  als_1
  {
    mesh                                "a_y.im"
    att                                 "a.1"
    kind                                "light"
    light                               1
  }
  als_2
  {
    mesh                                "a_yr.im"
    att                                 "a.2"
    kind                                "light"
    light                               1
  }
  als_3
  {
    mesh                                "a_r.im"
    att                                 "a.3"
    kind                                "light"
    light                               1
  }
  als_4
  {
    mesh                                "a_w.im"
    att                                 "a.4"
    kind                                "light"
    light                               1
  }
  lamp_otpusk
  {
    mesh                                "c.im"
    att                                 "a.s1"
    kind                                "light"
    light                               1
  }
  lamp_perekricha
  {
    mesh                                "p.im"
    att                                 "a.s2"
    kind                                "light"
    light                               1
  }
  lamp_tormoz
  {
    mesh                                "t.im"
    att                                 "a.s3"
    kind                                "light"
    light                               1
  }
  lamp_compressor
  {
    mesh                                "avar1.im"
    att                                 "a.s4"
    kind                                "light"
    light                               1
  }
  lamp_filtr
  {
    mesh                                "filtr.im"
    att                                 "a.s5"
    kind                                "light"
    light                               1
  }
  lamp_vent2
  {
    mesh                                "ventelator2.im"
    att                                 "a.s6"
    kind                                "light"
    light                               1
  }
  lamp_vent1
  {
    mesh                                "ventelator1.im"
    att                                 "a.s7"
    kind                                "light"
    light                               1
  }
  lamp_nasos
  {
    mesh                                "nasos.im"
    att                                 "a.s8"
    kind                                "light"
    light                               1
  }
  lamp_pps
  {
    mesh                                "ps_green.im"
    att                                 "a.s9"
    kind                                "light"
    light                               1
  }
  lamp_blockzachit
  {
    mesh                                "blok.im"
    att                                 "a.s10"
    kind                                "light"
    light                               1
  }
  lamp_zemlyavsp
  {
    mesh                                "zemla.im"
    att                                 "a.s12"
    kind                                "light"
    light                               1
  }
  lamp_vutorm
  {
    mesh                                "tormozpc.im"
    att                                 "a.s13"
    kind                                "light"
    light                               1
  }
  lamp_vusilovaya
  {
    mesh                                "silovaya.im"
    att                                 "a.s14"
    kind                                "light"
    light                               1
  }
  lamp_vuavariya
  {
    mesh                                "vu_silovaya.im"
    att                                 "a.s16"
    kind                                "light"
    light                               1
  }
  lamp_psprom
  {
    mesh                                "ps_red.im"
    att                                 "a.s15"
    kind                                "light"
    light                               1
  }
  lamp_vuvspom
  {
    mesh                                "vu_vspom.im"
    att                                 "a.s17"
    kind                                "light"
    light                               1
  }
  lamp_zemlya
  {
    mesh                                "zemlya.im"
    att                                 "a.s18"
    kind                                "light"
    light                               1
  }
  lamp_buhgolch
  {
    mesh                                "rele.im"
    att                                 "a.s19"
    kind                                "light"
    light                               1
  }
  lamp_maslotrans
  {
    mesh                                "transform.im"
    att                                 "a.s20"
    kind                                "light"
    light                               1
  }
  lamp_otpusk2
  {
    mesh                                "otpusktorm.im"
    att                                 "a.s21"
    kind                                "light"
    light                               1
  }
  lamp_blockbezop
  {
    mesh                                "blok_bez.im"
    att                                 "a.s22"
    kind                                "light"
    light                               1
  }
  sw_gv
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_compressor
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler01"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_reostat
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler02"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_radio
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler03"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_rezerv
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler04"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_pesok
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler05"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  pantograph_lever
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler06"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_kompressor2
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler07"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_ventilator
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler08"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_rezerv2
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler09"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_alsn
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler10"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_manual
  {
    kind                                "lever"
    mesh                                "tumbler2.IM"
    att                                 "a.tumbler11"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_svet
  {
    kind                                "lever"
    mesh                                "tumbler2.IM"
    att                                 "a.tumbler12"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  light_switch
  {
    kind                                "lever"
    mesh                                "tumbler2.IM"
    att                                 "a.tumbler13"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_bfred
  {
    kind                                "lever"
    mesh                                "tumbler2.IM"
    att                                 "a.tumbler14"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_bfr
  {
    kind                                "lever"
    mesh                                "tumbler2.IM"
    att                                 "a.tumbler15"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_bfl
  {
    kind                                "lever"
    mesh                                "tumbler2.IM"
    att                                 "a.tumbler16"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_kontrol1
  {
    kind                                "lever"
    mesh                                "tumbler3.IM"
    att                                 "a.tumbler17"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_kontrol2
  {
    kind                                "lever"
    mesh                                "tumbler3.IM"
    att                                 "a.tumbler18"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  sw_kontrol3
  {
    kind                                "lever"
    mesh                                "tumbler3.IM"
    att                                 "a.tumbler19"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
  }
  wheelslip_light
  {
    mesh                                "lr2.im"
    kind                                "light"
    att                                 "a.s24"
    light                               1
  }
}
cameralist
{
  camera0                               -0.779,0.155,0.448,6.306,-0.044
  camera1                               -0.807,-0.12,0.471,6.279,-0.125
  camera2                               0.819,0.06,0.509,6.279,-0.125
  camera3                               1.158,0.218,0.632,5.771,-0.117
}
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               240
    height                              180
  }
}
username-cz                             "Kabina ChS4t-351, snadná obtížnost v1"
username-jp                             "運転台 ChS4t-351 やさしい v1"
kuid-table
{
}

Файлы:

$screenshot$.jpg	26.2 kB
5.texture.txt	24 B
6.texture.txt	24 B
7.texture.txt	24 B
a_g.im	636 B
a_r.im	640 B
a_w.im	640 B
a_y.im	640 B
a_yr.im	628 B
alsn.texture.txt	27 B
7.tga	256.0 kB
avar1.im	476 B
avar2.im	476 B
blok_bez.im	480 B
bigtorm.im	15.6 kB
blok.im	476 B
box1.texture.txt	27 B
c.im	472 B
5.tga	1.0 MB
alsn.tga	256.0 kB
chs_cab.gs	4.6 kB
dev1.texture.txt	27 B
box1.tga	256.0 kB
dev2.texture.txt	27 B
dinamic.texture.txt	30 B
epkbox.texture.txt	29 B
dver.texture.txt	27 B
dev1.tga	1.0 MB
6.tga	1.0 MB
epk.tga	64.0 kB
epk.texture.txt	26 B
chs4tsaut.gs	33.4 kB
dinamic.tga	256.0 kB
dev2.tga	1.0 MB
filtr.im	476 B
horn.im	2.0 kB
kluch-epk.im	7.1 kB
kon.texture.txt	26 B
kran 395a.texture.txt	32 B
kran 254.texture.txt	31 B
kon.tga	256.0 kB
krani2.texture.txt	29 B
kurtka.texture.txt	29 B
l_0.im	712 B
l_stena1.texture.txt	31 B
chs4t_cab.im	1.5 MB
lamps.texture.txt	28 B
kran 395b.texture.txt	32 B
krani2.tga	1.0 MB
epkbox.tga	1.0 MB
kurtka.tga	256.0 kB
lamps.tga	1.0 MB
manometrs.texture.txt	32 B
lr1.im	476 B
lr2.im	476 B
motor.texture.txt	28 B
dver.tga	1.0 MB
l_stena1.tga	1.0 MB
kran 395a.tga	1.0 MB
nametu1.texture.txt	30 B
kran 395b.tga	1.0 MB
kran 254.tga	1.0 MB
manometrs.tga	1.0 MB
motor.tga	1.0 MB
nametu2.texture.txt	30 B
needle.im	2.3 kB
needle1.im	2.3 kB
p.im	472 B
p1.texture.txt	25 B
p2.texture.txt	25 B
nasos.im	476 B
nametu1.tga	1.0 MB
okno.texture.txt	27 B
obodis.texture.txt	29 B
otpusktorm.im	484 B
nametu2.tga	1.0 MB
p2.tga	1.0 MB
p6.texture.txt	25 B
p6.tga	256.0 kB
p3.texture.txt	25 B
p5.texture.txt	25 B
p6s.texture.txt	26 B
okno.tga	256.0 kB
obodis.tga	256.0 kB
okno1.texture.txt	28 B
okno1.tga	256.0 kB
p45.texture.txt	26 B
p1.tga	1.0 MB
pantograph.im	3.1 kB
pbz.im	3.6 kB
p_stena.texture.txt	30 B
pechka.texture.txt	29 B
pered.texture.txt	28 B
podnog.texture.txt	29 B
pol.texture.txt	26 B
podlok.texture.txt	29 B
podlok.tga	256.0 kB
pechka.tga	256.0 kB
p45.tga	1.0 MB
p6s.tga	1.0 MB
p3.tga	1.0 MB
p_stena.tga	1.0 MB
p5.tga	1.0 MB
podnog.tga	1.0 MB
pol.tga	1.0 MB
ps_green.im	476 B
radio.im	410 B
rama.texture.txt	27 B
rama1.texture.txt	28 B
pered.tga	1.0 MB
raciya.texture.txt	29 B
ps_red.im	480 B
raciya.tga	1.0 MB
rb.texture.txt	25 B
sa_140.im	1.3 kB
sa_30.im	1.3 kB
sa_50.im	1.2 kB
sa_80.im	1.2 kB
rele.im	476 B
revers.im	25.4 kB
saut.texture.txt	27 B
saut1.texture.txt	28 B
saut1.jpg	20.3 kB
rb.tga	256.0 kB
screen.jpg	98.4 kB
shkali.texture.txt	29 B
rama1.tga	1.0 MB
pultsaut.texture.txt	31 B
siden.im	2.3 kB
rama.tga	256.0 kB
shkali.tga	1.0 MB
sidenie.texture.txt	30 B
sidenie1.texture.txt	31 B
sign.texture.txt	27 B
sa_0.im	712 B
sa_20.im	1.2 kB
pultsaut.tga	1.0 MB
silovaya.im	480 B
skor.im	7.5 kB
sign.jpg	31.4 kB
smalltorm.im	12.6 kB
skor.texture.txt	27 B
sidenie1.tga	256.0 kB
skor.tga	1.0 MB
saut.tga	1.0 MB
sidenie.tga	1.0 MB
sound
sound / cabin.txt	932 B
sound / epk_vkl.wav	12.7 kB
sound / comp3.wav	89.2 kB
sound / gv_off.wav	55.9 kB
sound / gv_on.wav	32.8 kB
sound / klapan.wav	7.4 kB
sound / fan3.wav	240.2 kB
sound / comp1.wav	122.1 kB
sound / kont2.wav	19.4 kB
sound / kont.wav	19.6 kB
sound / controller.wav	11.0 kB
sound / fan1.wav	130.2 kB
sound / epk2.wav	52.3 kB
sound / kont_vikl.wav	24.1 kB
sound / kont_vkl.wav	29.9 kB
sound / kran_1.wav	43.2 kB
sound / epk.wav	142.6 kB
sound / kran_0.wav	31.1 kB
sound / kran_3.wav	170.5 kB
sound / kran_20.wav	188.1 kB
sound / kran_00.wav	225.7 kB
sound / ps+.wav	34.1 kB
sound / ps-.wav	36.9 kB
sound / nasos1.wav	160.2 kB
sound / nasos3.wav	138.2 kB
sound / panto_down.wav	85.7 kB
sound / r_11.wav	279.4 kB
sound / r_10.wav	346.9 kB
sound / 254_0.wav	158.1 kB
sound / 254_torm.wav	242.1 kB
sound / r_12.wav	353.4 kB
sound / r_13.wav	293.4 kB
sound / r_16.wav	408.9 kB
sound / kran_4.wav	245.1 kB
sound / r_15.wav	321.4 kB
sound / pant_up.wav	97.6 kB
sound / r_14.wav	260.9 kB
sound / r_0.wav	410.9 kB
sound / r_1.wav	255.1 kB
sound / r_17.wav	253.4 kB
sound / r_18.wav	304.4 kB
sound / r_21.wav	403.9 kB
sound / r_22.wav	327.6 kB
sound / r_26.wav	265.4 kB
sound / r_23.wav	347.9 kB
sound / r_3.wav	435.0 kB
sound / r_25.wav	346.9 kB
sound / r_20.wav	630.4 kB
sound / r_19.wav	386.4 kB
sound / r_29.wav	391.4 kB
sound / r_4.wav	305.5 kB
sound / r_30.wav	392.2 kB
sound / r_6.wav	271.1 kB
sound / r_9.wav	343.0 kB
sound / rb.wav	25.7 kB
sound / r_24.wav	278.4 kB
sound / r_7.wav	325.9 kB
sound / r_5.wav	356.9 kB
sound / r_8.wav	254.1 kB
sound / reverser.wav	11.4 kB
sound / revers.wav	32.2 kB
sound / stuk254.wav	10.4 kB
sound / s_1.wav	115.0 kB
sound / reostat.wav	229.3 kB
sound / stop.wav	77.6 kB
sound / s_2.wav	111.2 kB
sound / r_2.wav	422.9 kB
sound / saut_0.wav	115.4 kB
sound / r_27.wav	323.4 kB
sound / saut_warn.wav	4.3 kB
sound / saut_2.wav	112.4 kB
sound / svistok.wav	120.8 kB
sound / saut_1.wav	121.9 kB
sound / saut_3.wav	137.5 kB
sound / saut_4.wav	84.4 kB
sound / stuk395.wav	6.9 kB
sound / time.wav	94.2 kB
sound / trans_start.wav	115.6 kB
sound / vkl.wav	5.3 kB
sound / vent1.wav	145.1 kB
sound / sl2m.wav	289.5 kB
sound / vent3.wav	293.0 kB
sound / r_28.wav	1.0 MB
sp.texture.txt	25 B
spk.texture.txt	26 B
steclo-steclo2.texture.txt	48 B
steclo.bmp	65.1 kB
speedo_needle.im	2.7 kB
spk1.texture.txt	27 B
sp.tga	256.0 kB
spk1.jpg	392.5 kB
spk.tga	1.0 MB
t.im	472 B
svet.im	1.1 kB
strelka.im	2.2 kB
steclo2.bmp	65.1 kB
transform.im	480 B
trubi.texture.txt	28 B
t_trubka.texture.txt	31 B
tormozpc.im	480 B
traction.im	51.8 kB
tabl.texture.txt	27 B
t_trubka.tga	256.0 kB
tabl.bmp	1.0 MB
trubi.tga	1.0 MB
vu_silovaya.im	484 B
tumbler1.im	3.1 kB
ventelator1.im	484 B
tumbler.im	3.1 kB
vu_vspom.im	480 B
win_r.im	25.3 kB
za1d.texture.txt	27 B
v_0.im	712 B
zemla.im	476 B
zemlya.im	480 B
tumbler3.im	3.1 kB
tumbler2.im	3.1 kB
ventelator2.im	484 B
win_l.im	26.2 kB
vsakoe1.texture.txt	30 B
za1d.tga	1.0 MB
vsakoe1.tga	1.0 MB
Общий объём файлов:	60.8 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:354694:840002:4>	interior	Кабина ЧС4т-351 легкая v2	4.3	18.04.2023 23:10:35	31.0 MB
<kuid2:354694:840002:3>	interior	Кабина ЧС4т-351 легкая v2	3.7	2.05.2023 5:15:36	31.0 MB
<kuid:354694:840002>	interior	Кабина ЧС4т-351 легкая v1	2.5	13.06.2020 19:20:53	31.0 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:78638:100059:1>	#78638	traincar	v chs2t-1006 v2	3.7	18.10.2021 18:15:44	4.1 MB
<kuid2:78638:100461:1>	#78638	traincar	v chs4t-329 v2	3.7	28.04.2023 1:12:22	12.5 MB
<kuid:200439:200201>	#200439	traincar	CHS200-008 A	3.7	1.02.2015 0:22:47	12.4 MB
<kuid:200439:200202>	#200439	traincar	CHS200-008 B	3.7	1.02.2015 0:22:47	12.4 MB
<kuid:293699:22543>	#293699	traincar	ЧС4т-543	2.5	13.06.2020 19:23:31	5.2 MB
<kuid2:293699:22543:2>	#293699	traincar	CHS4t-543	3.3	18.04.2023 23:09:44	4.8 MB
<kuid2:293699:22543:3>	#293699	traincar	CHS4t-543	3.7	25.04.2023 9:58:52	4.8 MB
<kuid:293699:22744>	#293699	traincar	ЧС4т-744	2.9	25.06.2020 16:53:52	5.3 MB
<kuid:354694:830351>	#354694	traincar	ЧС4т-351	2.5	13.06.2020 19:22:02	6.1 MB
<kuid2:354694:830351:1>	#354694	traincar	CHS4t-351	2.9	18.04.2023 23:39:24	5.7 MB
<kuid2:354694:830351:2>	#354694	traincar	CHS4t-351	3.7	25.04.2023 9:58:52	5.7 MB
<kuid:354694:830595>	#354694	traincar	ЧС4т-595	2.9	23.04.2023 18:09:29	6.3 MB
<kuid2:354694:830595:1>	#354694	traincar	ЧС4т-595	2.9	16.07.2015 19:22:02	6.3 MB
<kuid2:546049:100315:2>	#546049	traincar	CHS4t-667	3.7	17.05.2023 21:48:39	4.8 MB
<kuid:546049:100330>	#546049	traincar	CHS4t-253	3.7	17.05.2023 17:59:18	8.6 MB
<kuid:546049:100331>	#546049	traincar	CHS4t-382	3.7	17.05.2023 17:59:17	8.7 MB
<kuid:546049:100348>	#546049	traincar	CHS4t-401	3.7	25.10.2021 20:42:57	9.9 MB
<kuid:546049:100351>	#546049	traincar	CHS4t-351	3.7	4.11.2021 11:44:44	9.5 MB
<kuid:546049:100357>	#546049	traincar	CHS4t-539	3.7	18.10.2021 19:29:03	12.1 MB
<kuid:546049:100365>	#546049	traincar	CHS4t-652	3.7	27.05.2023 13:54:00	5.0 MB