Queensland Railways Standard 15 feet Gated Level Crossing - These were standard on most single line branchlines or mainlines, they were found all over the state from Cairns to Suburban Brisbane. Based off Original Drawings from Cloncurry - Mt Cuthbert Branch in 1915. These gates were typically used for small country lanes, and farm crossings, they were always occupational crossings, as the guard would have to open and close them along the way as the train was moving. ===================================================
Model Notes; As I have designed the model with posts, please use Strkyers GBK Diamond Top Fence as this design was used alongside the posts to create the fence. The gates are fully animated and complement any QR Themed Layout. I must thank Aaron from Victrainz to allow me to incorporate some of the animation schemes from his VR gates. Please contact me personally if you wish to reskin or moddify the mesh.
Please Enjoy :) (C) Michael Gitsham - Queensland Heritage Railways 2012
qr 15ft level crossing gates single body |
|
qr 15ft level crossing gates single body / anim.kin |
6.0 kB |
qr 15ft level crossing gates single body / dirty white.texture.txt |
34 B |
qr 15ft level crossing gates single body / dirty white.tga |
12.5 kB |
qr 15ft level crossing gates single body / qr 15ft gate.im |
145.0 kB |
qr 15ft level crossing gates single body / red.texture.txt |
26 B |
qr 15ft level crossing gates single body / red.tga |
48.0 kB |
qr 15ft level crossing gates single body / rusty black.texture.txt |
34 B |
qr 15ft level crossing gates single body / rusty black.tga |
8.0 kB |
qr 15ft level crossing gates single body / screenshot.jpg |
22.0 kB |
screenshot.jpg |
8.9 kB |
Общий объём файлов: |
250.5 kB |