<kuid:341837:55029> B45-cabine ZS15100

Тип: Кабина
Опубликовано: 14.05.2023 17:45:17
Скачиваний: 47
Размер: 2.1 MB

Скачать

config.txt:

kuid                                    <kuid:341837:55029>
username                                "B45-cabine ZS15100"
category-class                          "ZI"
kind                                    "interior"
trainz-build                            3.7
script                                  "cabine"
class                                   "Cabine"
outside-visible-from-cabin              1
cabin-visible-from-outside              1
interior-controls-type                  "full"
cameradefault                           0
cameralist
{
  camera0                               0.75,-10.11,2.76,0.1,-0.2
  camera1                               1.65,-10.2,2.9,-3,-0.2
  camera2                               0,7,2.9,0,-0.2
  camera3                               1.1,-8.5,2.4,1,-0.1
  camera4                               1.55,-8.7,2.8,0.4,-0.1
  camera5                               -1.25,4.5,2.4,-1,-0.1
  camera6                               -1.55,4.4,2.8,-0.4,-0.1
}
mesh-table
{
  default
  {
    mesh                                "cabine.im"
    auto-create                         1
  }
  nuit
  {
    mesh                                "nuit.im"
    auto-create                         0
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "aig tach.im"
    auto-create                         1
    att                                 "a.aig tach"
    limits                              0,68
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "inverseur.im"
    auto-create                         1
    att                                 "a.inverseur"
    limits                              0,2
    angles                              0.5,-0.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.05
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "volant.im"
    att                                 "a.volant"
    limits                              0,32
    angles                              -0.75,0.75
    notches                             0,0.0303,0.0606,0.0909,0.1212,0.1515,0.1818,0.2121,0.2424,0.2727,0.303,0.3333,0.3636,0.3939,0.4242,0.4545,0.4848,0.5151,0.5454,0.5757,0.606,0.6363,0.6666,0.6969,0.7272,0.7575,0.7878,0.8181,0.8484,0.8787,0.909,0.9393,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1
    radius                              0.35
    auto-create                         1
  }
  independantbrake_lever
  {
    kind                                "lever"
    mesh                                "volant_frein.im"
    att                                 "a.frein_2"
    limits                              0,32
    angles                              -1,4
    notches                             0,0.0303,0.0606,0.0909,0.1212,0.1515,0.1818,0.2121,0.2424,0.2727,0.303,0.3333,0.3636,0.3939,0.4242,0.4545,0.4848,0.5151,0.5454,0.5757,0.606,0.6363,0.6666,0.6969,0.7272,0.7575,0.7878,0.8181,0.8484,0.8787,0.909,0.9393,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1
    radius                              0.35
    auto-create                         1
  }
  trainbrake_lever
  {
    kind                                "lever"
    mesh                                "frein.im"
    att                                 "a.frein"
    limits                              0,4
    angles                              -0.75,0.35
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    radius                              0.15
    mousespeed                          -1
    auto-create                         1
  }
  horn
  {
    kind                                "pullrope"
    mesh                                "poussoir.im"
    att                                 "a.poussoir"
    auto-create                         1
    limits                              0,1
    angles                              0,-0.01
    notches                             0,1
    notchheight                         0,0
    radius                              1
    att-parent                          "default"
    tooltip-token                       "horn_rope"
  }
  pantograph_lever
  {
    kind                                "lever"
    mesh                                "sw pantographe.im"
    att                                 "a.sw panto"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         3,3
    radius                              0.16
    auto-create                         1
    mousespeed                          -1
    onlight                             "switchlight0"
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "aig mano.im"
    att                                 "a.aig mano"
    limits                              0,1000
    auto-create                         1
  }
  ampmeter_needle
  {
    kind                                "needle"
    mesh                                "aig amp.im"
    auto-create                         1
    att                                 "a.aig amp"
    angles                              0.22,1
    limits                              0,4000
  }
  voltmeter
  {
    kind                                "needle"
    mesh                                "aig amp.im"
    auto-create                         1
    att                                 "a.aig voltmetre"
    angles                              0.22,1
    limits                              0,4000
  }
  light_switch
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.light_sw"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
    att-parent                          "default"
  }
  v1
  {
    kind                                "light"
    mesh                                "voyant.im"
    auto-create                         0
    att                                 "a.voyant1"
    att-parent                          "default"
  }
  v2
  {
    kind                                "light"
    mesh                                "voyant.im"
    auto-create                         0
    att                                 "a.voyant2"
    att-parent                          "default"
  }
  wiper_switch
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch_wiper"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
    tooltip-token                       "wiper"
  }
  switch_1
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.cab_light_sw"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
    tooltip-token                       "light_cab"
  }
  switch_2
  {
    kind                                "lever"
    mesh                                "switch_double.im"
    att                                 "a.switch 2"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
  }
  switch_3
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch 3"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
  }
  switch_4
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch 4"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
  }
  switch_5
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch 5"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
  }
  switch_6
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch 6"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
  }
  switch_7
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch 7"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
  }
  switch_8
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch 8"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
  }
  switch_9
  {
    kind                                "lever"
    mesh                                "switch_double.im"
    att                                 "a.switch 9"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
  }
  switch_10
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch 10"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
  }
  switch_11
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch 11"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
  }
  switch_12
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch 12"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
  }
  switch_13
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch 13"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
  }
  switch_14
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch 14"
    auto-create                         1
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.05
  }
  wiper
  {
    mesh                                "wiper.im"
    auto-create                         1
    anim                                "wiper.kin"
    att                                 "a.eg"
    att-parent                          "default"
  }
  wiper_1
  {
    mesh                                "wiper.im"
    auto-create                         1
    anim                                "wiper.kin"
    att                                 "a.eg1"
    att-parent                          "default"
  }
}
string-table
{
  panto                                 "pantographe"
  light                                 "eclairage"
  wiper                                 "essuie-glace"
  light_cab                             "ecl cabine"
  horn_rope                             "corne"
}
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               240
    height                              180
  }
}
kuid-table
{
}

Файлы:

aig amp.im	1.6 kB
sound
sound / cabin.txt	1.1 kB
sound / horn.wav	75.4 kB
sound / kvb.wav	138.5 kB
sound / lever_2.wav	21.8 kB
sound / lever_4.wav	16.8 kB
sound / notch_1.wav	2.8 kB
sound / frein.wav	244.0 kB
sound / lever_5.wav	18.3 kB
sound / reverser.wav	10.4 kB
sound / switch_6.wav	11.6 kB
sound / pchh.wav	95.4 kB
sound / throttle.wav	4.0 kB
sound / vacmam.wav	72.1 kB
sound / vacmar.wav	15.5 kB
sound / telocarr.wav	273.1 kB
sound / telocrun.wav	281.7 kB
sound / air_horn_3.wav	177.1 kB
sound / wiper.wav	124.7 kB
sound / wiperb.wav	124.7 kB
sound / panto.wav	125.0 kB
sound / kvboff.wav	344.3 kB
aig mano.im	2.6 kB
cabine.gs	2.7 kB
cabine.im	2.6 kB
pupitre.texture.txt	30 B
poussoir.im	2.5 kB
nuit.im	3.8 kB
pupitre_bump.texture.txt	81 B
$screenshot$.jpg	11.8 kB
inverseur.im	12.3 kB
frein.im	20.2 kB
sw pantographe.im	12.3 kB
switch.im	7.8 kB
switch_double.im	26.0 kB
volant.im	31.8 kB
volant_frein.im	31.2 kB
voyant.im	2.1 kB
wiper.im	34.4 kB
wiper.kin	4.5 kB
wipey.evt	28 B
cadrans.tga	384.0 kB
cadrans.texture.txt	30 B
aig tach.im	760 B
pupitre.tga	768.0 kB
pupitre_bump.tga	768.0 kB
Общий объём файлов:	4.2 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:341837:55029>	interior	B45-cabine ZS15100	3.7	14.05.2023 17:45:17	2.1 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:341837:10621:1>	#341837	traincar	B45-ZS 15100 ep2	3.5	22.09.2023 9:57:29	11.1 MB
<kuid2:341837:10621:2>	#341837	traincar	B45-ZS 15100 ep2	3.5	14.05.2023 17:45:11	11.2 MB
<kuid2:341837:10624:1>	#341837	traincar	B45-ZS 15100	3.5	22.09.2023 9:57:29	11.2 MB
<kuid2:341837:10624:2>	#341837	traincar	B45-ZS 15100 ep1	3.5	14.05.2023 17:45:11	11.2 MB
<kuid:341837:10627>	#341837	traincar	B45-ZS 15100 ep3	3.5	22.09.2023 9:57:29	11.1 MB
<kuid2:341837:10627:1>	#341837	traincar	B45-ZS 15100 ep3	3.5	14.05.2023 17:45:11	11.2 MB
<kuid:548299:101881>	#548299	traincar	M69-B45 - ZS 15100 ep1 publicite banania	3.5	27.09.2025 13:53:19	11.4 MB
<kuid2:548299:101881:2>	#548299	traincar	M69-B45 - ZS 15100 ep1 publicite banania	3.5	27.09.2025 1:28:48	11.4 MB
<kuid2:548299:9101881:1>	#548299	traincar	M69-B45 - ZS 15100 ep1 publicite Orangina	3.5	27.09.2025 10:32:52	11.8 MB