<kuid2:334133:569538:1> RZD__ER2T_cab

Тип: Кабина
Опубликовано: 26.08.2024 15:05:33
Скачиваний: 75
Размер: 29.3 MB
Автор: Lord9
Скачать

Кабина для моделей ЭТ2р и ЭР2Т/ со скриптом
Электричка с управлением по базовым возможностям игры. Версия 4.
Изменения:
Введено намокание, обмерзание, отогрев стекол.
Добавлен Блок САВПЕ, подсветка кнопок Клуб-У и рации.
Дворники переведены на управление штатными крутилками.
Режим вкл прожектора переделан на Тусклый-Яркий.
Различные мелкие доработки и измененения.
config.txt:
username                                "RZD__ER2T_cab"
kuid                                    <kuid2:334133:569538:1>
kind                                    "interior"
cameradefault                           2
category-class                          "ZI"
category-region                         "RU"
script                                  "el_et2m_cabin.gs"
class                                   "EL_ET2M_Cabin"
author                                  "Скрипты и адаптация для ЭТ2М: levik70"
description                             "Кабина для моделей ЭТ2р и ЭР2Т/ со скриптом
 Электричка с управлением по базовым возможностям игры. Версия 4. 
Изменения:
Введено намокание, обмерзание, отогрев стекол.
Добавлен Блок САВПЕ, подсветка кнопок Клуб-У и рации.
Дворники переведены на управление штатными крутилками.
Режим вкл прожектора переделан на Тусклый-Яркий.
Различные мелкие доработки и измененения."
category-era                            "1980s;1990s;2000s"
trainz-build                            3.7
interior-controls-type                  "full"
cabin-visible-from-outside              0
outside-visible-from-cabin              0
enable-shadows-in-cab                   1
thumbnails
{
  0
  {
    image                               "kaba.jpg"
    width                               800
    height                              600
  }
}
cameralist
{
  camera0                               0.833,-9.682,2.96,-12.596,-0.281
  camera1                               0.217,-10.463,2.515,-12.52,-1.252
  camera2                               -0.695,-9.924,2.808,-12.55,-0.178
  camera3                               -0.695,-9.924,2.911,-12.55,-0.178
  camera4                               -1.211,-9.959,2.793,-15.494,-0.067
  camera5                               -1.112,-9.938,2.288,-15.633,-0.463
  camera6                               -0.939,-9.877,1.795,-12.927,-0.309
}
extensions
{
  sound-length-base
  {
    sound/horn_end.wav                  "1.022"
    sound/horn_start.wav                "0.599"
    sound/svist_end.wav                 "0.789"
    sound/svist_start.wav               "0.602"
    sound/svistok.wav                   "1.400"
    sound/vp_kr.wav                     "3.841"
    sound/vp_gel.wav                    "3.000"
    sound/ogr_sk.wav                    "3.200"
    sound/vp_bel.wav                    "1.944"
    sound/vp_zel.wav                    "1.790"
    sound/nk_put.wav                    "4.407"
    sound/zvonok.wav                    "0.541"
  }
}
soundscript
{
  svistok1
  {
    repeat-delay                        0,0
    distance                            10,200
    attachment                          "a.zvon02"
    trigger                             "svist1"
    volume                              0.4
    nostartdelay                        1
    priority                            1000
    sound
    {
      0                                 "sound/svist_loop.wav"
    }
  }
  tifon1
  {
    repeat-delay                        0,0
    distance                            10,200
    attachment                          "a.zvon02"
    trigger                             "tifon1"
    volume                              0.4
    nostartdelay                        1
    priority                            1000
    sound
    {
      0                                 "sound/tifon_loop.wav"
    }
  }
  pant1
  {
    repeat-delay                        0,0
    distance                            100,200
    attachment                          "a.zvon02"
    trigger                             "pant1"
    volume                              0.9
    nostartdelay                        1
    priority                            1000
    sound
    {
      0                                 "sound/trans.wav"
    }
  }
  dvor_vpered
  {
    repeat-delay                        0,1
    distance                            2,5
    trigger                             "dvor_vpered"
    attachment                          "a.zvon02"
    volume                              0.9
    nostartdelay                        1
    priority                            1000
    sound
    {
      0                                 "sound/stochist.wav"
    }
  }
  dvor_nazad
  {
    repeat-delay                        0,1
    distance                            2,5
    trigger                             "dvor_nazad"
    attachment                          "a.zvon02"
    volume                              0.9
    nostartdelay                        1
    priority                            1000
    sound
    {
      0                                 "sound/stochist2.wav"
    }
  }
}
mesh-table
{
  default
  {
    mesh                                "cab.im"
    auto-create                         1
    effects
    {
      coord
      {
        kind                            "name"
        att                             "a.bil_coordinate"
        name                            "coord"
        fontcolor                       233,234,35
        fontsize                        0.005
      }
      station
      {
        kind                            "name"
        att                             "a.bil_station"
        name                            "station"
        fontcolor                       230,130,40
        fontsize                        0.006
      }
      time
      {
        kind                            "name"
        att                             "a.bil_time"
        name                            "time"
        fontcolor                       233,234,35
        fontsize                        0.005
      }
      time_g
      {
        kind                            "name"
        att                             "a.bil_time_graf"
        name                            ""
        fontcolor                       233,234,35
        fontsize                        0.005
      }
      cel
      {
        kind                            "name"
        att                             "a.bil_distance"
        name                            "cel"
        fontcolor                       90,139,50
        fontsize                        0.005
      }
      p_tm
      {
        kind                            "name"
        att                             "a.bil_tm"
        name                            "p_tm"
        fontcolor                       233,234,35
        fontsize                        0.005
      }
      p_ur
      {
        kind                            "name"
        att                             "a.bil_ur"
        name                            "p_ur"
        fontcolor                       233,234,35
        fontsize                        0.005
      }
      als
      {
        kind                            "name"
        att                             "a.bil_als"
        name                            "als"
        fontcolor                       233,234,35
        fontsize                        0.005
      }
      nomer_puti
      {
        kind                            "name"
        att                             "a.bil_track"
        name                            "nomer_puti"
        fontcolor                       233,234,35
        fontsize                        0.005
      }
      accel
      {
        kind                            "name"
        att                             "a.bil_accel_tx"
        name                            "accel"
        fontcolor                       233,234,35
        fontsize                        0.005
      }
      kt
      {
        kind                            "name"
        att                             "a.bil_brake_koef"
        name                            "bil_brake_koef"
        fontcolor                       233,234,35
        fontsize                        0.005
      }
      bil_target
      {
        kind                            "name"
        att                             "a.bil_target"
        name                            "bil_target"
        fontcolor                       233,234,35
        fontsize                        0.005
      }
      sav_time
      {
        kind                            "name"
        att                             "a.savpe01"
        name                            "sav_time"
        fontcolor                       100,136,126
        fontsize                        0.006
      }
      sav_time1
      {
        kind                            "name"
        att                             "a.savpe05"
        name                            "sav_time1"
        fontcolor                       100,136,126
        fontsize                        0.006
      }
      sav_skor
      {
        kind                            "name"
        att                             "a.savpe10"
        name                            "sav_skor"
        fontcolor                       100,136,126
        fontsize                        0.006
      }
      sav_sk02
      {
        kind                            "name"
        att                             "a.savpe04"
        name                            "sav_sk02"
        fontcolor                       100,136,126
        fontsize                        0.006
      }
      sav_sk01
      {
        kind                            "name"
        att                             "a.savpe07"
        name                            "sav_sk01"
        fontcolor                       100,136,126
        fontsize                        0.006
      }
      sav_sk03
      {
        kind                            "name"
        att                             "a.savpe06"
        name                            "sav_sk03"
        fontcolor                       100,136,126
        fontsize                        0.006
      }
      sav_put
      {
        kind                            "name"
        att                             "a.savpe09"
        name                            "sav_put"
        fontcolor                       100,136,126
        fontsize                        0.006
      }
      sav_put2
      {
        kind                            "name"
        att                             "a.savpe08"
        name                            "sav_put2"
        fontcolor                       100,136,126
        fontsize                        0.006
      }
      sav_tiag
      {
        kind                            "name"
        att                             "a.savpe02"
        name                            "sav_tiag"
        fontcolor                       100,136,126
        fontsize                        0.006
      }
      sav_regm
      {
        kind                            "name"
        att                             "a.savpe03"
        name                            "sav_regm"
        fontcolor                       100,136,126
        fontsize                        0.006
      }
    }
  }
  attachments
  {
    mesh                                "attach_mesh.im"
    auto-create                         1
  }
  alsbv_7
  {
    mesh                                "als03.im"
    att                                 "a.bil_als0"
    auto-create                         1
  }
  alsbv_6
  {
    mesh                                "als02.im"
    att                                 "a.bil_als0"
    auto-create                         1
  }
  alsbv_5
  {
    mesh                                "als01.im"
    att                                 "a.bil_als0"
    auto-create                         1
  }
  alsbv_0
  {
    mesh                                "als0.im"
    att                                 "a.bil_als0"
    auto-create                         1
  }
  alsbv_1
  {
    mesh                                "als1.im"
    att                                 "a.bil_als1"
    auto-create                         1
  }
  alsbv_2
  {
    mesh                                "als2.im"
    att                                 "a.bil_als2"
    auto-create                         1
  }
  alsbv_3
  {
    mesh                                "als3.im"
    att                                 "a.bil_als3"
    auto-create                         1
  }
  alsbv_4
  {
    mesh                                "als4.im"
    att                                 "a.bil_als4"
    auto-create                         1
  }
  als_pom_03
  {
    mesh                                "als03.im"
    att                                 "a.pom_als0"
    auto-create                         1
  }
  als_pom_02
  {
    mesh                                "als02.im"
    att                                 "a.pom_als0"
    auto-create                         1
  }
  als_pom_01
  {
    mesh                                "als01.im"
    att                                 "a.pom_als0"
    auto-create                         1
  }
  als_pom_00
  {
    mesh                                "als0.im"
    att                                 "a.pom_als0"
    auto-create                         1
  }
  als_pom_1
  {
    mesh                                "als1.im"
    att                                 "a.pom_als1"
    auto-create                         1
  }
  als_pom_2
  {
    mesh                                "als2.im"
    att                                 "a.pom_als2"
    auto-create                         1
  }
  als_pom_3
  {
    mesh                                "als3.im"
    att                                 "a.pom_als3"
    auto-create                         1
  }
  als_pom_4
  {
    mesh                                "als4.im"
    att                                 "a.pom_als4"
    auto-create                         1
  }
  bil_ligt_zapret_otpuska
  {
    mesh                                "suppress_brakes.im"
    att                                 "a.bil_suppress_brakes"
    auto-create                         0
  }
  light_strelka_otklonenie_bil
  {
    mesh                                "bil_track_st.im"
    att                                 "a.bil_spd_current"
    auto-create                         0
  }
  light_strelka_pryamo_bil
  {
    mesh                                "bil_track_dv.im"
    att                                 "a.bil_spd_current"
    auto-create                         0
  }
  bil_warning
  {
    mesh                                "warning.im"
    att                                 "a.bil_warning"
    auto-create                         0
  }
  bil_spd_cur
  {
    mesh                                "bil_spd_cur.im"
    anim                                "bil_spd_cur.kin"
    att                                 "a.bil_spd_current"
    auto-create                         1
  }
  bil_spd_max
  {
    mesh                                "bil_spd_max.im"
    anim                                "bil_spd_max.kin"
    att                                 "a.bil_spd_current"
    auto-create                         1
  }
  bil_spd_tgt
  {
    mesh                                "bil_spd_tgt.im"
    anim                                "bil_spd_tgt.kin"
    att                                 "a.bil_spd_current"
    auto-create                         1
  }
  bil_accel
  {
    mesh                                "rev_fwd.im"
    att                                 "a.bil_spd_current"
    auto-create                         0
  }
  bil_decel
  {
    mesh                                "rev_back.im"
    att                                 "a.bil_spd_current"
    auto-create                         0
  }
  bil_ligt_poezd
  {
    mesh                                "bil_mode_p.im"
    att                                 "a.bil_spd_current"
    auto-create                         0
  }
  bil_ligt_manevry
  {
    mesh                                "bil_mode_m.im"
    att                                 "a.bil_spd_current"
    auto-create                         0
  }
  bil_kp_ready
  {
    mesh                                "kr_wr.im"
    att                                 "a.bil_spd_current"
    auto-create                         1
  }
  bil_rmp
  {
    mesh                                "klub_knopki/bil_rmp.im"
    att                                 "a.bil_spd_current"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.001
    notches                             0,1
    notchheight                         0,0
  }
  bil_vk
  {
    mesh                                "klub_knopki/bil_vk.im"
    att                                 "a.bil_spd_current"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.001
    notches                             0,1
    notchheight                         0,0
  }
  bil_rmp_p
  {
    mesh                                "klub_knopki/bil_rmp_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_rmp"
    auto-create                         0
  }
  bil_vk_p
  {
    mesh                                "klub_knopki/bil_vk_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_vk"
    auto-create                         0
  }
  bil_f
  {
    mesh                                "klub_knopki/bil_f.im"
    att                                 "a.bil_spd_current"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.001
    notches                             0,1
    notchheight                         0,0
  }
  bil_f_p
  {
    mesh                                "klub_knopki/bil_f_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_f"
    auto-create                         0
  }
  bil_0
  {
    mesh                                "klub_knopki/0.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_0_p
  {
    mesh                                "klub_knopki/0_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_0"
    auto-create                         0
  }
  bil_1
  {
    mesh                                "klub_knopki/1.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_1_p
  {
    mesh                                "klub_knopki/1_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_1"
    auto-create                         0
  }
  bil_2
  {
    mesh                                "klub_knopki/2.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_2_p
  {
    mesh                                "klub_knopki/2_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_2"
    auto-create                         0
  }
  bil_3
  {
    mesh                                "klub_knopki/3.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_3_p
  {
    mesh                                "klub_knopki/3_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_3"
    auto-create                         0
  }
  bil_4
  {
    mesh                                "klub_knopki/4.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_4_p
  {
    mesh                                "klub_knopki/4_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_4"
    auto-create                         0
  }
  bil_5
  {
    mesh                                "klub_knopki/5.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_5_p
  {
    mesh                                "klub_knopki/5_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_5"
    auto-create                         0
  }
  bil_6
  {
    mesh                                "klub_knopki/6.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_6_p
  {
    mesh                                "klub_knopki/6_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_6"
    auto-create                         0
  }
  bil_7
  {
    mesh                                "klub_knopki/7.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_7_p
  {
    mesh                                "klub_knopki/7_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_7"
    auto-create                         0
  }
  bil_8
  {
    mesh                                "klub_knopki/8.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_8_p
  {
    mesh                                "klub_knopki/8_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_8"
    auto-create                         0
  }
  bil_9
  {
    mesh                                "klub_knopki/9.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_9_p
  {
    mesh                                "klub_knopki/9_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_9"
    auto-create                         0
  }
  bil_up
  {
    mesh                                "klub_knopki/up.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_up_p
  {
    mesh                                "klub_knopki/up_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_up"
    auto-create                         0
  }
  bil_down
  {
    mesh                                "klub_knopki/down.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_down_p
  {
    mesh                                "klub_knopki/down_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_down"
    auto-create                         0
  }
  bil_k
  {
    mesh                                "klub_knopki/k.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_k_p
  {
    mesh                                "klub_knopki/k_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_kp_ready"
    auto-create                         0
  }
  bil_l
  {
    mesh                                "klub_knopki/l.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_l_p
  {
    mesh                                "klub_knopki/l_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_ligt_zapret_otpuska"
    auto-create                         0
  }
  bil_o
  {
    mesh                                "klub_knopki/o.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_o_p
  {
    mesh                                "klub_knopki/o_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_o"
    auto-create                         0
  }
  bil_i
  {
    mesh                                "klub_knopki/i.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_i_p
  {
    mesh                                "klub_knopki/i_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_i"
    auto-create                         0
  }
  bil_p
  {
    mesh                                "klub_knopki/p.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_p_p
  {
    mesh                                "klub_knopki/p_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_p"
    auto-create                         0
  }
  bil_plus
  {
    mesh                                "klub_knopki/plus.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_plus_p
  {
    mesh                                "klub_knopki/plus_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_plus"
    auto-create                         0
  }
  bil_minus
  {
    mesh                                "klub_knopki/minus.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_minus_p
  {
    mesh                                "klub_knopki/minus_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_minus"
    auto-create                         0
  }
  bil_otpr
  {
    mesh                                "klub_knopki/otpr.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_otpr_p
  {
    mesh                                "klub_knopki/otpr_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_otpr"
    auto-create                         0
  }
  bil_podt
  {
    mesh                                "klub_knopki/podt.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_podt_p
  {
    mesh                                "klub_knopki/podt_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_podt"
    auto-create                         0
  }
  bil_os
  {
    mesh                                "klub_knopki/oc.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_os_p
  {
    mesh                                "klub_knopki/oc_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_os"
    auto-create                         0
  }
  bil_k20
  {
    mesh                                "klub_knopki/k20.im"
    att                                 "a.thumbs"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0.001,0.0012
    notches                             0,1
    notchheight                         0,0
  }
  bil_k20_p
  {
    mesh                                "klub_knopki/k20_p.im"
    att                                 "a.podsvet"
    att-parent                          "bil_k20"
    auto-create                         0
  }
  knp01
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe11"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0025
    notches                             0,1
    notchheight                         0,0
  }
  knp02
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe12"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.002
    notches                             0,1
    notchheight                         0,0
  }
  knp03
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe13"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.002
    notches                             0,1
    notchheight                         0,0
  }
  knp04
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe14"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0018
    notches                             0,1
    notchheight                         0,0
  }
  knp05
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe15"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0019
    notches                             0,1
    notchheight                         0,0
  }
  knp06
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe16"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0023
    notches                             0,1
    notchheight                         0,0
  }
  knp07
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe17"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0017
    notches                             0,1
    notchheight                         0,0
  }
  knp08
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe18"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0017
    notches                             0,1
    notchheight                         0,0
  }
  knp09
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe19"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0018
    notches                             0,1
    notchheight                         0,0
  }
  knp10
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe20"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0019
    notches                             0,1
    notchheight                         0,0
  }
  knp11
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe21"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0015
    notches                             0,1
    notchheight                         0,0
  }
  knp12
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe22"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0015
    notches                             0,1
    notchheight                         0,0
  }
  knp13
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe23"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0015
    notches                             0,1
    notchheight                         0,0
  }
  knp14
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe24"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.002
    notches                             0,1
    notchheight                         0,0
  }
  knp15
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe25"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0018
    notches                             0,1
    notchheight                         0,0
  }
  knp16
  {
    mesh                                "knp_sav.im"
    att                                 "a.savpe26"
    kind                                "pullrope"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,0.0023
    notches                             0,1
    notchheight                         0,0
  }
  knp17
  {
    mesh                                "knp_on.im"
    att                                 "a.savpe_on"
    kind                                "lever"
    auto-create                         1
    angles                              0.25,-0.25
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    radius                              0.001
    mousespeed                          -1
  }
  zerkalo_right
  {
    mesh                                "zerkalo_right.im"
    auto-create                         1
    att                                 "a.zer_rig"
    att-parent                          "default"
    limits                              0,1
    angles                              0,1
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         0,0,0,0,0,0,0,0,0
    mousespeed                          -1
    kind                                "lever"
  }
  zerkalo_left
  {
    mesh                                "zerkalo_left.im"
    auto-create                         1
    att                                 "a.zer_left"
    att-parent                          "default"
    limits                              0,1
    angles                              0,-1
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         0,0,0,0,0,0,0,0,0
    mousespeed                          -1
    kind                                "lever"
  }
  switchlight0
  {
    kind                                "light"
    mesh                                "lamp_dveri.im"
    att                                 "a.lamp_dveri"
    auto-create                         0
  }
  switchlight1
  {
    kind                                "light"
    mesh                                "lamp_preobraz.im"
    att                                 "a.lamp_preobraz"
    auto-create                         0
  }
  switchlight9
  {
    kind                                "light"
    mesh                                "lamp_rn.im"
    att                                 "a.lamp_RN"
    auto-create                         0
  }
  switchlight3
  {
    kind                                "light"
    mesh                                "lamp_o.im"
    att                                 "a.lamp_O"
    auto-create                         0
  }
  switchlight12
  {
    kind                                "light"
    mesh                                "lamp_left.im"
    att                                 "a.lamp_left"
    auto-create                         0
  }
  switchlight5
  {
    kind                                "light"
    mesh                                "lamp_LKIT.im"
    att                                 "a.lamp_LKIT"
    auto-create                         0
  }
  switchlight6
  {
    kind                                "light"
    mesh                                "lamp_RN.im"
    att                                 "a.lamp_BV"
    auto-create                         1
  }
  switchlight7
  {
    kind                                "light"
    mesh                                "red_lamp/lamp_red.im"
    att                                 "a.lamp_pozar"
    auto-create                         0
  }
  switchlight8
  {
    kind                                "light"
    mesh                                "lamp_o.im"
    att                                 "a.lamp_RB"
    auto-create                         0
  }
  switchlight2
  {
    kind                                "light"
    mesh                                "lamp_vspom.im"
    att                                 "a.lamp_vspom"
    auto-create                         0
  }
  switchlight10
  {
    kind                                "light"
    mesh                                "red_lamp/lamp_red.im"
    att                                 "a.lamp_sot"
    auto-create                         0
  }
  switchlight11
  {
    kind                                "light"
    mesh                                "lamp_T.im"
    att                                 "a.lamp_T"
    auto-create                         0
  }
  switchlight4
  {
    kind                                "light"
    mesh                                "lamp_RN.im"
    att                                 "a.lamp_BV"
    auto-create                         0
  }
  switchlight14
  {
    kind                                "light"
    mesh                                "red_lamp/lamp_red.im"
    att                                 "a.lamp_O"
    auto-create                         0
  }
  switchlight13
  {
    kind                                "light"
    mesh                                "lamp_K.im"
    att                                 "a.lamp_K"
    auto-create                         0
  }
  manual
  {
    kind                                "animated-lever"
    mesh                                "manual.IM"
    anim                                "manual.kin"
    att                                 "a.manual"
    att-parent                          "default"
    auto-create                         1
    mousespeed                          0.5
    notches                             0,0.182,0.4545,0.7272,1
    notchheight                         1,1,1,1,1
    limits                              0,1
  }
  throttle_lever
  {
    mesh                                "throttle.IM"
    kind                                "lever"
    att                                 "a.throtte"
    auto-create                         1
    att-parent                          "attachments"
    limits                              0,8
    angles                              0,1.618
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.9,1
    notchheight                         3,3,3,3,3,3,3,3,3
    radius                              0.14
    mousespeed                          -0.07
  }
  trainbrake_lever
  {
    mesh                                "395.IM"
    att                                 "a.mainbrake"
    auto-create                         1
    kind                                "lever"
    limits                              0,4
    angles                              -0.78,-2.85
    notches                             0,0.25,0.5,0.75,1
    notchheight                         3,3,3,3,3
    radius                              0.18
    att-parent                          "default"
    mousespeed                          -0.35
  }
  bru
  {
    mesh                                "bru.IM"
    att                                 "a.bru"
    auto-create                         1
    kind                                "lever"
    limits                              0,1
    angles                              0,4.728
    notches                             0,0.16,0.32,0.48,0.64,0.8,1
    notchheight                         2,2,2,2,2,2,2
    radius                              0.15
    att-parent                          "default"
    mousespeed                          1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "revers.im"
    auto-create                         1
    att                                 "a.revers"
    limits                              0,2
    angles                              -1.25,0
    notches                             0,0.5,1
    notchheight                         3,3,3
    radius                              0.14
  }
  sw
  {
    kind                                "pulllever"
    mesh                                "pedal.im"
    att                                 "a.pedal_p"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,-0.28
    notches                             0,0.5,1
    notchheight                         0,0,0
  }
  tiff
  {
    kind                                "pulllever"
    mesh                                "pedal.im"
    att                                 "a.pedal_m"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,-0.28
    notches                             0,1
    notchheight                         0,0
  }
  epk_key
  {
    kind                                "lever"
    mesh                                "epk_key.IM"
    att                                 "a.epk"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  nm
  {
    kind                                "lever"
    mesh                                "kr.im"
    att                                 "a.nm"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  tm
  {
    kind                                "lever"
    mesh                                "kr.im"
    att                                 "a.tm"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  epk_kr
  {
    kind                                "lever"
    mesh                                "kr.im"
    att                                 "a.epk_kr"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  stopkran
  {
    kind                                "lever"
    mesh                                "stopkran.im"
    att                                 "a.stopkran"
    auto-create                         1
    mousespeed                          -1
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  perekl_ppt
  {
    kind                                "lever"
    mesh                                "perekl.im"
    att                                 "a.perekl_tormoznoj"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              -3.14,-1.57
    notches                             0,0.5,1
    notchheight                         0,0,0
  }
  switch17
  {
    kind                                "lever"
    mesh                                "perekl.im"
    att                                 "a.perekl_lamp"
    auto-create                         1
    mousespeed                          -1
    radius                              0.05
    angles                              0,1.57
    notches                             0,1
    notchheight                         1,1
  }
  perekl_proj
  {
    kind                                "lever"
    mesh                                "perekl_proj.im"
    att                                 "a.perekl_proj"
    auto-create                         1
    mousespeed                          1
    radius                              0.0001
    angles                              0,1.57
    notches                             0,0.5,1
    notchheight                         0,0,0
  }
  wipers
  {
    kind                                "lever"
    mesh                                "perekl_proj.im"
    att                                 "a.perekl_obogrev"
    auto-create                         1
    mousespeed                          -1
    radius                              0.05
    limits                              0,1
    angles                              1.9,0.1
    notches                             0,0.35,0.67,1
    notchheight                         0,0,0,0
  }
  krut_wip_mach
  {
    kind                                "lever"
    mesh                                "krut_wip.im"
    att                                 "a.krutilka_mach"
    auto-create                         1
    limits                              0,1
    angles                              0,4.728
    notches                             0,0.35,0.67,1
    notchheight                         0,0,0,0
    radius                              0.05
    att-parent                          "default"
    mousespeed                          0.6
  }
  krut_wip_pom
  {
    kind                                "lever"
    mesh                                "krut_wip.im"
    att                                 "a.krutilka_pom"
    auto-create                         1
    limits                              0,1
    angles                              0,4.728
    notches                             0,0.35,0.67,1
    notchheight                         0,0,0,0
    radius                              0.05
    att-parent                          "default"
    mousespeed                          0.6
  }
  l_wiper
  {
    mesh                                "r_dvor.im"
    auto-create                         1
    att                                 "a.l_wip"
    att-parent                          "default"
    anim                                "r_dvor.kin"
  }
  r_wiper
  {
    mesh                                "r_dvor.im"
    auto-create                         1
    att                                 "a.r_wip"
    att-parent                          "default"
    anim                                "r_dvor.kin"
  }
  dop_obogrev
  {
    kind                                "lever"
    mesh                                "perekl2.im"
    att                                 "a.dop_obogrev"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  maslootd
  {
    kind                                "lever"
    mesh                                "perekl2.im"
    att                                 "a.maslootd"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  pitanie
  {
    kind                                "lever"
    mesh                                "perekl2.im"
    att                                 "a.pitanie"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  rb1
  {
    kind                                "pullrope"
    mesh                                "rb.im"
    att                                 "a.rb1"
    auto-create                         1
    mousespeed                          50
    radius                              0.1
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         0,0
  }
  rb3
  {
    kind                                "pullrope"
    mesh                                "rb.im"
    att                                 "a.rb2"
    auto-create                         1
    mousespeed                          50
    radius                              0.1
    limits                              0,1
    angles                              0,-0.003
    notches                             0,1
    notchheight                         0,0
  }
  pedal
  {
    kind                                "pullrope"
    mesh                                "knopka_black.im"
    att                                 "a.zvon02"
    auto-create                         1
    mousespeed                          50
    radius                              0.1
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
  }
  nw
  {
    kind                                "pullrope"
    mesh                                "button.im"
    att                                 "a.zvon05"
    att-parent                          "default"
    auto-create                         1
    mousespeed                          80
    radius                              0.1
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
  }
  switch20
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.br"
    att-parent                          "default"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              -0.1,-0.2
    notches                             0,1
    notchheight                         0,0
  }
  inform
  {
    kind                                "pullrope"
    mesh                                "knopka_red.im"
    att                                 "a.br2"
    att-parent                          "default"
    auto-create                         1
    mousespeed                          70
    radius                              0.1
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
  }
  rb2
  {
    kind                                "pullrope"
    mesh                                "knopka_krug.im"
    att                                 "a.zvon03"
    limits                              0,1
    auto-create                         1
    mousespeed                          50
    angles                              0,-0.004
    notches                             0,1
    notchheight                         0,0
  }
  tiffon
  {
    kind                                "pullrope"
    mesh                                "knopka_red.im"
    att                                 "a.zvon01"
    auto-create                         1
    mousespeed                          70
    radius                              0.1
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
  }
  zvonok
  {
    kind                                "pullrope"
    mesh                                "knopka_red.im"
    att                                 "a.zvon"
    auto-create                         1
    mousespeed                          50
    radius                              0.1
    limits                              0,1
    angles                              0,-0.0015
    notches                             0,1
    notchheight                         0,0
  }
  dz
  {
    kind                                "lever"
    mesh                                "dz.im"
    att                                 "a.dz"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  switch_4
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.torm_comb"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  tormozenie
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.torm_electr"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  dveri_mash_lev
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.dveri_mash_lev"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  dveri_mash_prav
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.dveri_mash_prav"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  dveri_pom_lev
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.dveri_pom_lev"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  dveri_pom_prav
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.dveri_pom_prav"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  osv_cab_low
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.osv_cab_low"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  blinker
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.osv_cab_norm"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    angles                              0,-0.7
    notches                             0,1
    notchheight                         1,1
  }
  vz
  {
    kind                                "pulllever"
    mesh                                "perekl1.im"
    att                                 "a.vozvrat"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    angles                              0,-0.7
    notches                             0,1
    notchheight                         1,1
  }
  pantup
  {
    kind                                "pulllever"
    mesh                                "perekl1.im"
    att                                 "a.pant_up"
    auto-create                         1
    radius                              0.05
    angles                              0,-0.7
    notches                             0,1
    notchheight                         1,1
    mousespeed                          50
    test-collisions                     1
  }
  pantdown
  {
    kind                                "pulllever"
    mesh                                "perekl1.im"
    att                                 "a.pant_down"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    angles                              0,-0.7
    notches                             0,1
    notchheight                         1,1
  }
  switch_20
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.unused"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    angles                              0,-0.7
    notches                             0,1
    notchheight                         1,1
  }
  pesok
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.pesok"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  osvpult_low
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.osv_pult_low"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  osvpult
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.osv_pult_norm"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  avar_ept
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.avar_ept"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  otpusk
  {
    kind                                "pulllever"
    mesh                                "perekl1.im"
    att                                 "a.otpusk"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    angles                              0,-0.7
    notches                             0,1
    notchheight                         1,1
  }
  vu
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.bkr_u"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  stekloobogrev_bok
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.stekloobogrev"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  stekloobogrev
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.stekloobogrev1"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  door_left_lever
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.left_door_otkr"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    angles                              0,-0.7
    notches                             0,1
    notchheight                         1,1
  }
  door_right_lever
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.right_door_otkr"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    angles                              0,-0.7
    notches                             0,1
    notchheight                         1,1
  }
  otopl_usil
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.otopl_usil"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  otopl_norm
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.otopl_norm"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  compressor_vspom
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.compressor_vspom"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  ventilacia
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.ventilacia"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  switch_38
  {
    kind                                "lever"
    mesh                                "perekl1.im"
    att                                 "a.unused2"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  vent_cab1
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.vent_cab1"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  zel_svet
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.zel_svet"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  marsh_fonar
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.marsh_fonar"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  sign_verh
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.sign_verh"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  sign_niz
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.sign_niz"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  b1
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.b1"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  buf_right
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.buf_right"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  buf_left
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.buf_left"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  b
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.b"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  perekl_1
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  osv1
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.osv1"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  osv_deg
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.osv_deg"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  radio
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.radio"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  ept_on_off
  {
    kind                                "lever"
    mesh                                "perekl_l1.im"
    att                                 "a.ept_on_off"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  switchlight15
  {
    kind                                "light"
    mesh                                "warning.im"
    att                                 "a.bil_warning"
    auto-create                         0
  }
  cab_voltmeter
  {
    mesh                                "black_arrow_3.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.kw"
    limits                              0,4100
    angles                              0,4
    att-parent                          "default"
  }
  bplocomain_needle
  {
    mesh                                "red_arrow.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_nm"
    angles                              0,4.71231
    limits                              0,1600
    att-parent                          "default"
  }
  bploco_equaliser
  {
    mesh                                "red_arrow.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tc_ur"
    limits                              0,1600
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    mesh                                "black_arrow_2.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.tm_nm"
    angles                              0,4.71231
    limits                              0,1600
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "black_arrow_1.im"
    auto-create                         1
    angles                              0,4.71231
    att                                 "a.tc_ur"
    limits                              0,1600
  }
  podsvet
  {
    mesh                                "pribors_er2.im"
    auto-create                         0
    att                                 "a.podsvet"
    att-parent                          "default"
  }
  podsvet_low
  {
    mesh                                "pribors_er2_low.im"
    auto-create                         0
    att                                 "a.podsvet"
    att-parent                          "default"
  }
  light_racia
  {
    mesh                                "light_racia.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  lamp_cab_norm
  {
    mesh                                "lamp_cab_norm.im"
    auto-create                         0
    att                                 "a.lamp_night"
    att-parent                          "default"
  }
  lamp_cab_low
  {
    mesh                                "lamp_cab_low.im"
    auto-create                         0
    att                                 "a.lamp_night"
    att-parent                          "default"
  }
  steklo_first_rain_l
  {
    mesh                                "steklo_first_rain_l.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_first_rain_r
  {
    mesh                                "steklo_first_rain_r.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_first_rain_ochn_l
  {
    mesh                                "steklo_first_rain_ochn_l.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_first_rain_ochn_r
  {
    mesh                                "steklo_first_rain_ochn_r.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_first_frost
  {
    mesh                                "steklo_first_frost.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_first_frost_otogrev
  {
    mesh                                "steklo_first_frost_otogrev.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_bok_rain
  {
    mesh                                "steklo_bok_rain.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_bok_frost
  {
    mesh                                "steklo_bok_frost.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_bok_frost_otogrev
  {
    mesh                                "steklo_bok_frost_otogrev.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  pomoha
  {
    mesh-asset                          <kuid:771389:100472>
    mesh                                "pomoha.im"
    anim                                "pomoha.kin"
    animation-loop-speed                1
    auto-create                         1
    att                                 "a.pomoha"
    att-parent                          "default"
  }
  ind_sboi
  {
    mesh                                "ind_red.im"
    att                                 "a.savpe27"
    auto-create                         1
  }
  ind_15
  {
    mesh                                "ind_zel.im"
    att                                 "a.savpe28"
    auto-create                         1
  }
  ind_20
  {
    mesh                                "ind_zel.im"
    att                                 "a.savpe29"
    auto-create                         1
  }
  ind_40
  {
    mesh                                "ind_zel.im"
    att                                 "a.savpe30"
    auto-create                         1
  }
  ind_50
  {
    mesh                                "ind_zel.im"
    att                                 "a.savpe31"
    auto-create                         1
  }
  ind_60
  {
    mesh                                "ind_zel.im"
    att                                 "a.savpe32"
    auto-create                         1
  }
  ind_70
  {
    mesh                                "ind_zel.im"
    att                                 "a.savpe33"
    auto-create                         1
  }
  ind_80
  {
    mesh                                "ind_zel.im"
    att                                 "a.savpe34"
    auto-create                         1
  }
  ind_100
  {
    mesh                                "ind_zel.im"
    att                                 "a.savpe35"
    auto-create                         1
  }
  ind_110
  {
    mesh                                "ind_zel.im"
    att                                 "a.savpe36"
    auto-create                         1
  }
  ind_120
  {
    mesh                                "ind_zel.im"
    att                                 "a.savpe37"
    auto-create                         1
  }
}
string-table
{
  klub-obj-type-0                       "СВЕТОФОР/"
  klub-obj-type-1                       "СТАНЦИЯ/"
  klub-obj-type-2                       "ОПАСНОЕ МЕСТО/"
  klub-obj-type-3                       "ПЛАТФОРМА/"
  klub-obj-type-4                       "МОСТ/"
  klub-obj-type-5                       "НЕЙТР. ВСТАВКА/"
  klub-obj-type-6                       "ПРОБА ТОРМОЗОВ/"
  klub-obj-type-7                       "ТОКОРАЗДЕЛ/"
  klub-obj-type-8                       "ПЕРЕЕЗД/"
  klub-obj-type-9                       "СИГНАЛ/"
  klub-obj-type-10                      "КТСМ/"
  klub-obj-type-11                      "ПЕРЕХОД/"
  klub-obj-type-12                      "ТОННЕЛЬ/"
  klub-obj-type-13                      "ГАЗОПРОВОД/"
  klub-obj-type-14                      "ПУТЕПРОВОД/"
  klub-obj-type-15                      "СТРЕЛКА/"
  klub_rk_on                            "ЯЧЕЙКА РК ИСПРАВНА"
  klub_rk_off                           "ЯЧЕЙКА РК НЕИСПРАВНА"
  klub_rk_no                            "ЯЧЕЙКА РК ОТСУТСТВУЕТ"
  klub-als-ek                           "ЭК"
  klub-als-50                           "50"
  klub-als-175                          "ЕН"
  klub-track-true                       "ПР"
  klub-track-false                      "НП"
  klub-epk-sryv                         "СРЫВ ЭПК"
  tiag_0                                "0"
  tiag_1                                "1"
  tiag_2                                "2"
  tiag_3                                "3"
  tiag_4                                "4"
  tiag_5                                "5"
  tiag_6                                "6"
  tiag_7                                "7"
  tiag_8                                "8"
  track                                 "трек"
  proga                                 "прогр."
  avtoinf_true                          "а-инф: вкл"
  avtoinf_false                         "а-инф: выкл"
  klub-pr-ur1                           "ДАВЛЕНИЕ В УР1"
  klub-pr-ur2                           "ДАВЛЕНИЕ В УР2"
  nomer_mash                            "НОМЕР МАШИНИСТА :"
  nomer_poezda                          "НОМЕР ПОЕЗДА"
  dlina_os                              "ДЛИНА В ОСЯХ"
  dlina_vag                             "ДЛИНА В ВАГОНАХ"
  mass_k                                "МАССА"
  nomer_puti                            "НОМЕР ПУТИ"
  vvedite_com                           "ВВЕДИТЕ КОМАНДУ:"
  speed-bel                             "СКОРОСТЬ НА БЕЛЫЙ :"
  pravilnost                            "ПРИЗНАК ПРАВИЛЬНОСТИ"
  trak_true                             "ПР"
  trak_notrue                           "НП"
  ogran_spd                             "ОГРАНИЧЕНИЕ"
  klub-koord                            "КООРДИНАТА (М):"
  klub-izm-koord                        "ИЗМ. КООРДИНАТЫ:"
  hasek                                 "ЭК"
  klub-u-target-type-0                  "СВЕТОФОР/"
  klub-u-target-type-1                  "СТАНЦИЯ/"
  klub-u-target-type-2                  "ОПАСНОЕ МЕСТО/"
  klub-u-target-type-3                  "ПЛАТФОРМА/"
  klub-u-target-type-4                  "МОСТ/"
  klub-u-target-type-5                  "НЕЙТРАЛЬНАЯ ВСТАВКА/"
  klub-u-target-type-6                  "ПРОБА ТОРМОЗОВ/"
  klub-u-target-type-7                  "ТОКОРАЗДЕЛ/"
  klub-u-target-type-8                  "ПЕРЕЕЗД/"
  klub-u-target-type-9                  "СИГНАЛ/"
  klub-u-target-type-10                 "КТСМ\ДИСК/"
  klub-u-target-type-11                 "ПЕРЕХОД/"
  klub-u-target-type-12                 "ГАЗОПРОВОД/"
  klub-u-target-type-13                 "ПУТЕПРОВОД/"
  klub-u-target-type-14                 "СТРЕЛКА/"
}
kuid-table
{
  inform_0                              <kuid:1085072:1045>
  inform_1                              <kuid:1085072:1044>
  inform_2                              <kuid:1085072:1039>
  inform_3                              <kuid:1085072:1042>
  inform_4                              <kuid:1085072:1046>
  radio                                 <kuid:771389:100358>
  1                                     <kuid:771389:100472>
}
Файлы:
klub_knopki
klub_knopki / 0.im	1.1 kB
klub_knopki / 0_p.im	1.1 kB
klub_knopki / 1.im	1.1 kB
klub_knopki / 1_p.im	1.0 kB
klub_knopki / 2.im	1.0 kB
klub_knopki / 2_p.im	956 B
klub_knopki / 3.im	1.1 kB
klub_knopki / 3_p.im	1.0 kB
klub_knopki / 4_p.im	1.0 kB
klub_knopki / 4.im	1.1 kB
klub_knopki / 5.im	1.1 kB
klub_knopki / 5_p.im	1.0 kB
klub_knopki / 6_p.im	1.0 kB
klub_knopki / 6.im	1.1 kB
klub_knopki / 7.im	1.1 kB
klub_knopki / 7_p.im	1.0 kB
klub_knopki / 8.im	1.0 kB
klub_knopki / 8_p.im	956 B
klub_knopki / 9.im	1.1 kB
klub_knopki / 9_p.im	1.0 kB
klub_knopki / attach_mesh.im	496 B
klub_knopki / attach_mesh2.im	496 B
klub_knopki / bil_f_p.im	1.2 kB
klub_knopki / bil_rmp.im	1.3 kB
klub_knopki / bil_rmp_p.im	1.2 kB
klub_knopki / bil_vk.im	1.3 kB
klub_knopki / bk_p.im	1.0 kB
klub_knopki / bk.im	1.1 kB
klub_knopki / bil_vk_p.im	1.2 kB
klub_knopki / down_p.im	956 B
klub_knopki / f.im	780 B
klub_knopki / bil_f.im	1.3 kB
klub_knopki / i.im	1.0 kB
klub_knopki / down.im	1.0 kB
klub_knopki / i_p.im	956 B
klub_knopki / k20_p.im	1.0 kB
klub_knopki / k.im	1.1 kB
klub_knopki / k_p.im	1.0 kB
klub_knopki / l_p.im	956 B
klub_knopki / f_p.im	700 B
klub_knopki / l.im	1.0 kB
klub_knopki / k20.im	1.1 kB
klub_knopki / minus_p.im	1.0 kB
klub_knopki / minus.im	1.1 kB
klub_knopki / oc.im	780 B
klub_knopki / o.im	1.0 kB
klub_knopki / oc_p.im	700 B
klub_knopki / otpr.im	1.0 kB
klub_knopki / o_p.im	988 B
klub_knopki / plus.im	1.1 kB
klub_knopki / otpr_p.im	956 B
klub_knopki / p.im	1.1 kB
klub_knopki / p_p.im	1.0 kB
klub_knopki / plus_p.im	1.0 kB
klub_knopki / podt.im	1.1 kB
klub_knopki / podt_p.im	1.0 kB
klub_knopki / pmp_p.im	1.0 kB
klub_knopki / pmp.im	1.1 kB
klub_knopki / tex9.texture.txt	30 B
klub_knopki / up.im	972 B
klub_knopki / up_p.im	892 B
klub_knopki / tx9p.texture.txt	30 B
als0.im	1.1 kB
als02.im	1.1 kB
als1.im	1.1 kB
als4.im	1.1 kB
red_lamp
red_lamp / lamp_red.im	4.3 kB
red_lamp / tex5.texture.txt	41 B
red_lamp / tex5.jpg	707.9 kB
bil_mode_m.im	580 B
bil_mode_p.im	580 B
als03.im	2.6 kB
alsn.gs	5.3 kB
sound
sound / 395_ekstr.wav	245.1 kB
sound / 395_otpusk.wav	42.4 kB
sound / avt_2.wav	38.3 kB
sound / avt_8.wav	29.7 kB
sound / beep2.wav	5.5 kB
sound / beep.wav	47.4 kB
sound / brake1.wav	25.3 kB
sound / bv_off.wav	46.9 kB
sound / cabin.txt	1.8 kB
sound / bv_on.wav	46.9 kB
sound / engine_start.wav	80.3 kB
sound / epk_end.wav	1.4 kB
sound / epk_loop.wav	34.7 kB
sound / engine_stop.wav	60.7 kB
sound / epk_short.wav	37.1 kB
sound / epk_start.wav	10.3 kB
sound / epk_vkl.wav	12.7 kB
sound / epk_stop.wav	25.3 kB
sound / dsp.wav	253.7 kB
sound / klapan.wav	11.7 kB
sound / epk_vklu.wav	60.8 kB
sound / gv_on.wav	79.1 kB
sound / klub_beep_2.wav	4.9 kB
sound / klapan2.wav	11.3 kB
sound / knopka.wav	4.9 kB
sound / horn_start.wav	58.5 kB
sound / lever_2.wav	11.6 kB
sound / horn_end.wav	94.9 kB
sound / kn_7.wav	38.3 kB
sound / ob_pip.wav	46.9 kB
sound / kran_4.wav	245.1 kB
sound / pant_up.wav	126.4 kB
sound / ob.wav	253.3 kB
sound / rb.wav	29.4 kB
sound / rev.wav	58.0 kB
sound / ogr_sk.wav	278.4 kB
sound / ppt2.wav	81.4 kB
sound / saut_0.wav	64.9 kB
sound / nk_put.wav	380.2 kB
sound / saut_pip.wav	4.9 kB
sound / saut_warn.wav	4.3 kB
sound / saut_zapret.wav	4.3 kB
sound / saut_3.wav	83.9 kB
sound / saut_2.wav	112.4 kB
sound / stochist.wav	38.8 kB
sound / stopkran.wav	14.4 kB
sound / saut_4.wav	84.4 kB
sound / stuk395.wav	6.9 kB
sound / stochist2.wav	40.2 kB
sound / saut_1.wav	120.4 kB
sound / stuk395_1.wav	26.5 kB
sound / stuk395-2.wav	71.7 kB
sound / svist_end.wav	70.8 kB
sound / svist_loop.wav	78.6 kB
sound / svist_start.wav	54.7 kB
sound / switch1.wav	3.4 kB
sound / switch.wav	4.0 kB
sound / stuk395-3.wav	103.5 kB
sound / switch5.wav	29.4 kB
sound / svistok.wav	120.6 kB
sound / switch4.wav	35.3 kB
sound / switch3.wav	45.6 kB
sound / switch2.wav	44.7 kB
sound / svistok_1.wav	133.0 kB
sound / switch_vukl.wav	34.8 kB
sound / switch_pant.wav	44.7 kB
sound / switch_vkl.wav	39.8 kB
sound / switch_vz.wav	44.2 kB
sound / throttle.wav	72.8 kB
sound / throttle3.wav	46.9 kB
sound / throttle2.wav	46.9 kB
sound / tp_down.wav	58.0 kB
sound / tp_hod.wav	53.9 kB
sound / tifon_loop.wav	67.4 kB
sound / tp_torm.wav	21.0 kB
sound / tumbler vkl.wav	22.7 kB
sound / tumbler.wav	5.8 kB
sound / svistok1.wav	229.6 kB
sound / tumbler3.wav	30.5 kB
sound / tumbler vukl.wav	30.5 kB
sound / tumbler_2.wav	14.1 kB
sound / tumbler4.wav	21.7 kB
sound / vkl.wav	5.3 kB
sound / tumbler_3.wav	21.7 kB
sound / tumbler_1.wav	25.4 kB
sound / tumbler_buf.wav	14.8 kB
sound / sl2m.wav	420.1 kB
sound / tumbler_buf2.wav	22.7 kB
sound / vu_vukl.wav	25.9 kB
sound / vu_vkl.wav	26.3 kB
sound / tp_up.wav	168.0 kB
sound / vp_bel.wav	159.0 kB
sound / zvonok.wav	50.5 kB
sound / vp_zel.wav	144.0 kB
sound / vp_gel.wav	230.0 kB
sound / ob_mach.wav	1.1 MB
sound / trans.wav	299.2 kB
sound / vp_kr.wav	333.7 kB
395.im	6.7 kB
bil_spd_tgt.im	1.9 kB
bil_track_dv.im	580 B
als2.im	1.1 kB
attach_mesh.im	556 B
bil_track_st.im	580 B
bil_spd_max.im	11.3 kB
black_arrow_2.im	9.2 kB
als3.im	1.1 kB
als01.im	2.6 kB
button-button.texture.txt	29 B
black_arrow_3.im	1.7 kB
button.texture.txt	29 B
black_arrow_1.im	12.5 kB
bru.im	19.5 kB
bil_spd_cur.im	31.8 kB
button.im	10.2 kB
detali.texture.txt	29 B
ek_map.gs	3.5 kB
dz.im	5.7 kB
epk_key.im	4.4 kB
ind_zel.im	1.2 kB
ind_red.im	508 B
el_et2m_cabin.gs	48.2 kB
bil_spd_max.kin	155.3 kB
bil_spd_tgt.kin	155.3 kB
klub_tex-klub_tex.texture.txt	51 B
bil_spd_cur.kin	422.4 kB
klub_tex.jpg	329.2 kB
button.jpg	684.7 kB
klub_tex.texture.txt	31 B
knopka_3.im	3.2 kB
klub_u7n_el.gs	37.8 kB
knopka_black.im	2.1 kB
knopka_krug.im	6.7 kB
knopka_red.im	2.1 kB
kr.im	2.7 kB
knp_sav.im	3.7 kB
kr_wr.im	580 B
krut_wip.im	4.3 kB
l_dvor.im	10.9 kB
knp_on.im	10.1 kB
l_dvor.kin	2.4 kB
lamp_bv.im	4.3 kB
lamp_k.im	4.3 kB
lamp_dveri.im	4.3 kB
lamp_lkit.im	4.3 kB
lamp_o.im	4.3 kB
lamp_cab_norm.im	10.3 kB
lamp_cab_low.im	10.3 kB
lamp_left.im	4.3 kB
lamp_pozar.im	4.3 kB
lamp_preobraz.im	4.3 kB
lamp_rn.im	4.3 kB
lamp_t.im	4.3 kB
lamp_rb.im	4.3 kB
lamp_vspom.im	4.3 kB
lamp_sot.im	4.3 kB
light_pult_er2.texture.txt	37 B
lamp_red.im	4.3 kB
man_1.texture.txt	28 B
light_racia.im	69.6 kB
man_2.texture.txt	28 B
light_pult_er2.jpg	111.1 kB
manual.im	14.2 kB
pedal.im	2.6 kB
kaba.jpg	988.1 kB
perekl.im	6.7 kB
manual.kin	28.9 kB
perekl1.im	2.5 kB
perekl_l1.im	5.7 kB
perekl3.im	1.4 kB
perekl2.im	4.7 kB
pribors_er2_low.im	5.7 kB
perekl_proj.im	13.6 kB
pribors_er2.im	5.7 kB
r_dvor.kin	2.4 kB
r_dvor.im	10.9 kB
rb.im	13.5 kB
red_arrow.im	11.4 kB
rev_back.im	516 B
rev_fwd.im	516 B
revers.im	18.9 kB
klub_tex.bmp	768.1 kB
klub_tex2.bmp	768.1 kB
detali.jpg	2.4 MB
cab.im	2.2 MB
steklo_bok_frost.im	3.7 kB
steklo_bok_frost_otogrev.im	3.7 kB
steklo_first_frost.im	808 B
steklo_bok_rain.im	3.7 kB
steklo_first_frost_otogrev.im	824 B
steklo_first_rain_l.im	572 B
steklo_first_rain_ochn_l.im	584 B
steklo_first_rain_ochn_r.im	584 B
steklo_first_rain_r.im	572 B
stop-stop.texture.txt	43 B
stop.texture.txt	27 B
strelka_voltmeter.im	896 B
suppress_brakes.im	1.1 kB
stopkran.im	2.6 kB
switch_2.im	7.5 kB
te_t.texture.txt	28 B
stop.jpg	85.2 kB
tex1.texture.txt	29 B
tex10.texture.txt	30 B
tex11.texture.txt	28 B
tex10.jpg	85.0 kB
tex12.texture.txt	28 B
tex14.jpg	34.9 kB
tex14.texture.txt	28 B
tex12.jpg	173.9 kB
tex2.texture.txt	27 B
stop.bmp	192.1 kB
tex3.texture.txt	27 B
tex2.jpg	653.5 kB
tex395-tex395.texture.txt	29 B
tex3.jpg	666.4 kB
tex395.texture.txt	29 B
tex4.texture.txt	27 B
tex11.jpg	942.8 kB
tex5.texture.txt	27 B
tex6.texture.txt	27 B
tex5.jpg	738.5 kB
tex1.jpg	2.8 MB
tex395.jpg	956.4 kB
tex7-tex7.texture.txt	43 B
tex4.jpg	1.5 MB
tex6.jpg	657.9 kB
tex7_frost.texture.txt	31 B
tex7.jpg	176.1 kB
tex7_frost_otogrev.texture.txt	54 B
tex7_frost.jpg	197.4 kB
tex7_ochn_rain.texture.txt	63 B
tex7_ochn_rain.jpg	264.1 kB
tex6t.jpg	699.4 kB
tex7_rain.texture.txt	53 B
man_2.tga	3.0 MB
tex7.bmp	768.1 kB
tex8.texture.txt	27 B
tex6p.jpg	734.5 kB
tex7_rain.jpg	275.8 kB
tex9.texture.txt	27 B
texlp.texture.txt	30 B
texlp.jpg	90.3 kB
texnp.texture.txt	30 B
texp.texture.txt	28 B
texnp.jpg	92.4 kB
throttle.im	51.6 kB
tx9p.texture.txt	27 B
warning.im	1.7 kB
zerkalo.jpg	39.6 kB
zerkalo.texture.txt	30 B
zerkalo_left.im	21.1 kB
zerkalo_right.im	21.1 kB
tx9p.jpg	927.9 kB
tex8.jpg	998.1 kB
tex9.jpg	927.5 kB
tex7_rain.bmp	768.1 kB
man_1.tga	4.0 MB
Общий объём файлов:	41.5 MB
Версии элемента:
kuid	kind	name	build	date	size
<kuid2:334133:569538:1>	interior	RZD__ER2T_cab	3.7	26.08.2024 15:05:33	29.3 MB
<kuid:334133:569538>	interior	RZD__ER2T_cab	3.7	14.05.2023 10:55:26	29.3 MB
Зависимости:
kuid	author	kind	name	build	date	size
<kuid:771389:100358>	#771389	hornsound	Sound_radio_MVPS	3.5	18.09.2016 20:23:56	44.0 MB
<kuid:771389:100472>	#771389	scenery	Pomoshnik_machinista	3.5	24.06.2020 19:34:45	4.6 MB
<kuid:1085072:1039>	#1085072	hornsound	Sound_inform_MSK_Novoperedelkino_CPPK	3.7	26.08.2024 15:07:35	125.1 MB
<kuid:1085072:1042>	#1085072	hornsound	Sound_inform_MSK_Solnechnaya_CPPK	3.7	26.08.2024 15:08:04	122.1 MB
<kuid:1085072:1044>	#1085072	hornsound	Sound_inform_MSK_Aprelevka_CPPK	3.7	26.08.2024 15:06:35	132.5 MB
<kuid:1085072:1045>	#1085072	hornsound	Sound_inform_MSK_Airport_Vnukovo_CPPK	3.7	26.08.2024 15:06:03	127.1 MB
<kuid:1085072:1046>	#1085072	hornsound	Sound_inform_MSK_Lesnoy_Gorodok_CPPK	3.7	26.08.2024 15:07:05	126.8 MB
Всего связей: 7, неизвестных связей: 0
Зависимые элементы:
kuid	author	kind	name	build	date	size
<kuid:334133:170871>	Lord9	traincar	ER2R 708701	3.7	19.04.2023 15:04:27	17.4 MB