<kuid2:241009:100614:2> MAV Traxx interior

Тип: Кабина
Опубликовано: 26.08.2024 15:35:30
Скачиваний: 21
Размер: 9.1 MB

Скачать

config.txt:

username                                "MAV Traxx interior"
trainz-build                            4.5
kind                                    "interior"
cameradefault                           0
cabin-visible-from-outside              0
category-era                            "2000s"
category-class                          "ZI"
category-region                         "HU"
interior-controls-type                  "full"
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               240
    height                              180
  }
}
mesh-table
{
  default
  {
    mesh                                "cab2.trainzmesh"
    auto-create                         1
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "throttle.im"
    att                                 "a.throttle"
    limits                              0,24
    angles                              0,1.6
    notches                             0,0.05,0.1,0.15,0.2,0.25,0.3,0.35,0.4,0.45,0.5,0.55,0.6,0.65,0.7,0.72,0.75,0.78,0.8,0.83,0.85,0.88,0.9,0.93,0.95,0.97,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1
    radius                              0.2
    auto-create                         1
    att-parent                          "default"
  }
  speedo_needle2
  {
    kind                                "digital-dial-spd"
    att                                 "a.digispeedo"
    mesh                                "needlespedo.im"
    font                                "arial"
    fontsize                            0.006
    fontcolor                           0,0,0
    auto-create                         1
    att-parent                          "default"
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "needlespedo.im"
    att                                 "a.digispeedo001"
    limits                              0,47
    auto-create                         1
    att-parent                          "default"
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reverse_lever.im"
    att                                 "a.throttle01"
    limits                              0,2
    angles                              -1,0.48
    notches                             0,0.65,1
    notchheight                         0,0,0
    mousespeed                          1
    auto-create                         1
    att-parent                          "default"
  }
  flow_needle
  {
    kind                                "needle"
    mesh                                "brng.im"
    att                                 "a.brake1"
    limits                              0,1800
    auto-create                         1
    att-parent                          "default"
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "brn.im"
    att                                 "a.brake2"
    limits                              0,1600
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "brng.im"
    att                                 "a.brakecyl2"
    limits                              -5,1600
    auto-create                         1
    att-parent                          "default"
  }
  switch1
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch001"
    limits                              -100,100
    angles                              -0.2618,0.2618
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
    att-parent                          "default"
  }
  switch2
  {
    kind                                "lever"
    mesh                                "switchwhite.im"
    att                                 "a.switch002"
    limits                              -100,100
    angles                              -0.2618,0.2618
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
    att-parent                          "default"
  }
  switch3
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch003"
    limits                              -100,100
    angles                              -0.2618,0.2618
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
    att-parent                          "default"
  }
  switch4
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch004"
    limits                              -100,100
    angles                              -0.2618,0.2618
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
    att-parent                          "default"
  }
  light_switch
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch005"
    limits                              -100,100
    angles                              0,0.2618
    notches                             0,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
    att-parent                          "default"
  }
  switch6
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch006"
    limits                              -100,100
    angles                              -0.2618,0.2618
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
    att-parent                          "default"
  }
  switch7
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch007"
    limits                              -100,100
    angles                              -0.2618,0.2618
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
    att-parent                          "default"
  }
  switch8
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch008"
    limits                              -100,100
    angles                              -0.2618,0.2618
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
    att-parent                          "default"
  }
  switch9
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch009"
    limits                              -100,100
    angles                              -0.2618,0.2618
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
    att-parent                          "default"
  }
  pantograph_lever
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch010"
    limits                              -100,100
    angles                              -0.2618,0.2618
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
    att-parent                          "default"
  }
  tolatokapcsolo
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch011"
    limits                              -100,100
    angles                              -0.2618,0.2618
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
    att-parent                          "default"
  }
  ebersegikiiktato
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch012"
    limits                              -100,100
    angles                              -0.2618,0.2618
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
    att-parent                          "default"
  }
  switch13
  {
    kind                                "lever"
    mesh                                "switch.im"
    att                                 "a.switch013"
    limits                              -100,100
    angles                              -0.2618,0.2618
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
    att-parent                          "default"
  }
  switch14
  {
    kind                                "lever"
    mesh                                "switch2.im"
    att                                 "a.switch014"
    limits                              -100,100
    angles                              -0.2618,0.2618
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
    att-parent                          "default"
  }
  trainbrake_lever
  {
    kind                                "lever"
    mesh                                "blever.im"
    att                                 "a.trainbrake_lever"
    limits                              0,4
    angles                              0,1.85
    notches                             0,0.06,0.16,0.233,0.3,0.39,0.482,0.582,0.675,0.775,1
    notchheight                         1,1,1,1,1,1,1,1,1,1,1,1
    radius                              0.2
    att-parent                          "default"
    auto-create                         1
  }
  independantbrake_lever
  {
    kind                                "lever"
    mesh                                "b2lever.im"
    att                                 "a.independantbrake_lever"
    limits                              0,32
    angles                              0,1.45
    notches                             0,0.16,0.255,0.35,0.44,0.58,0.7,0.8,0.9,1
    notchheight                         1,2,2,2,2,2,2,2,2,2
    radius                              0.2
    att-parent                          "default"
    auto-create                         1
  }
  afb_lever
  {
    kind                                "lever"
    mesh                                "b2lever.im"
    att                                 "a.afb"
    limits                              0,32
    angles                              0,1.45
    notches                             0,0.16,0.255,0.35,0.44,0.58,0.7,0.8,0.9,1
    notchheight                         1,2,2,2,2,2,2,2,2,2
    radius                              0.2
    att-parent                          "default"
    auto-create                         1
  }
  vjelzo_1
  {
    kind                                "light"
    att                                 "a.vjelzo"
    mesh                                "vjelzo_z.im"
    auto-create                         0
    att-parent                          "default"
  }
  vjelzo_2
  {
    kind                                "light"
    att                                 "a.vjelzo"
    mesh                                "vjelzo_zs80.im"
    auto-create                         0
    att-parent                          "default"
  }
  vjelzo_3
  {
    kind                                "light"
    att                                 "a.vjelzo"
    mesh                                "vjelzo_zs40.im"
    auto-create                         0
    att-parent                          "default"
  }
  vjelzo_4
  {
    kind                                "light"
    att                                 "a.vjelzo"
    mesh                                "vjelzo_s.im"
    auto-create                         0
    att-parent                          "default"
  }
  vjelzo_5
  {
    kind                                "light"
    att                                 "a.vjelzo"
    mesh                                "vjelzo_v.im"
    auto-create                         0
    att-parent                          "default"
  }
  vjelzo_6
  {
    kind                                "light"
    att                                 "a.vjelzo"
    mesh                                "vjelzo_f.im"
    auto-create                         1
    att-parent                          "default"
  }
  vjelzo_7
  {
    kind                                "light"
    att                                 "a.vjelzo"
    mesh                                "vjelzo_t.im"
    auto-create                         0
    att-parent                          "default"
  }
  vjelzo_8
  {
    kind                                "light"
    att                                 "a.vjelzo"
    mesh                                "vjelzo_zs120.im"
    auto-create                         0
    att-parent                          "default"
  }
}
cameralist
{
  camera0                               -0.655,0.783,0.311,0,-0.185
}
kuid                                    <kuid2:241009:100614:2>
kuid-table
{
}

Файлы:

3.texture.txt	24 B
back.texture.txt	27 B
4.texture.txt	24 B
b2lever.im	25.1 kB
back2.texture.txt	28 B
$screenshot$.jpg	66.2 kB
brn.im	7.1 kB
blever.im	40.8 kB
brng.im	7.1 kB
back2.jpg	268.9 kB
3.jpg	317.8 kB
back.jpg	398.5 kB
displays.texture.txt	31 B
4.jpg	489.4 kB
fst.texture.txt	26 B
kaffeetasse.texture.txt	34 B
needlespedo.im	1.8 kB
pult1.texture.txt	28 B
kaffeetasse.jpg	178.8 kB
cab2.fbx	1.3 MB
pult2.texture.txt	28 B
fst.jpg	882.0 kB
reverse_lever.im	7.8 kB
switch.im	29.4 kB
switch2.im	55.7 kB
cab2.trainzmesh	1.4 MB
switchwhite.im	29.4 kB
szek2.texture.txt	28 B
throttle.im	14.0 kB
traxx_cab.gs	5.4 kB
displays.jpg	1.3 MB
uveg.texture.txt	41 B
untitled-13.jpg	174.4 kB
vjelzo_f.im	492 B
vjelzo_s.im	492 B
vjelzo_t.im	492 B
vjelzo_v.im	492 B
vjelzo_z.im	492 B
vjelzo_zs120.im	492 B
vjelzo_zs40.im	492 B
vjelzo_zs80.im	492 B
pult1.jpg	1.4 MB
szek2.jpg	861.8 kB
pult2.jpg	1.6 MB
uveg.tga	1.0 MB
Общий объём файлов:	11.7 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:241009:100614:2>	interior	MAV Traxx interior	4.5	26.08.2024 15:35:30	9.1 MB
<kuid2:241009:100614:1>	interior	MAV Traxx interior [beta]	3.7	12.01.2021 18:45:47	9.2 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:241009:100001:2>	#241009	traincar	H-START 480 005	3.7	23.07.2020 20:27:55	18.1 MB
<kuid2:241009:100001:3>	#241009	traincar	H-START 480 005	3.7	26.08.2024 15:37:01	18.1 MB
<kuid2:241009:100092:1>	#241009	traincar	H-START 480 013	3.7	23.07.2020 20:31:16	17.8 MB
<kuid2:241009:100092:2>	#241009	traincar	H-START 480 013	3.7	26.08.2024 15:37:32	17.8 MB
<kuid:241009:100361>	#241009	traincar	H-START 480 007	3.7	23.07.2020 20:08:26	17.2 MB
<kuid2:241009:100361:1>	#241009	traincar	H-START 480 007	3.7	26.08.2024 15:37:53	17.2 MB
<kuid:241009:100549>	#241009	traincar	H-START 480 001-1	3.7	12.01.2021 19:16:04	18.4 MB
<kuid2:241009:100588:1>	#241009	traincar	H-START 480 006	3.7	17.01.2021 1:12:25	19.6 MB
<kuid2:241009:100588:2>	#241009	traincar	H-START 480 006	3.7	26.08.2024 15:38:13	19.6 MB
<kuid2:241009:100611:1>	#241009	traincar	H-START 480 022	3.7	4.11.2021 11:39:10	16.2 MB
<kuid2:459255:100086:1>	#459255	traincar	H-START 480 004-5	3.7	23.07.2020 19:45:18	19.2 MB
<kuid2:459255:100086:2>	#459255	traincar	H-START 480 004-5	3.7	26.08.2024 15:36:26	19.2 MB
<kuid2:536482:189925:1>	#536482	traincar	H-START 480 002-9	3.7	12.01.2021 18:37:00	17.0 MB
<kuid2:536482:189925:2>	#536482	traincar	H-START 480 002-9 (cs-eve)	3.7	26.08.2024 15:36:51	17.1 MB
<kuid:536482:190052>	#536482	traincar	D-XRAIL 185 593	3.7	18.10.2021 19:34:40	17.0 MB
<kuid:825560:100316>	#825560	traincar	H-START 480 014	3.7	4.11.2021 11:44:44	17.0 MB
<kuid:969396:100530>	#969396	traincar	H-START 480 004-5 Gábor Áron	3.7	4.11.2021 11:56:05	18.1 MB