<kuid2:210518:300490:1> Two_Harbors_Ore_Dock

Тип: Индустрия
Опубликовано: 25.10.2021 20:41:44
Скачиваний: 27
Размер: 9.1 MB

Скачать

This is based on one of two docks at Two Harbors, Minnesota. You must add four
switches in surveyor using rail only track. This is a bit tricky but can be done.
Two go where the 2-track approach trestle makes the transition to the 4-track bin
section. When looking from shore towards the far end the other two form a single
crossover from the left track to right track on the 2-track approach trestle. A
double crossover is possible though not prototypical.
This is interactive to unload hoppers with iron ore (kuid2:30671:9260111:2) on top.
It is not interactive to load ore ships at the bottom.
This uses kuid2:36713:40100:2 for the lamp posts.

VERY IMPORTANT! This is a large and extreamly high poly count item.

config.txt:

kuid                                    <kuid2:210518:300490:1>
kind                                    "industry"
light                                   1
height-range                            -20,20
script                                  "oredump"
class                                   "OreDump"
obsolete-table
{
}
mesh-table
{
  default
  {
    mesh                                "Part_1.im"
    auto-create                         1
    effects
    {
      0
      {
        kind                            "attachment"
        att                             "a.lamp0"
        default-mesh                    <kuid2:36713:40100:1>
      }
      1
      {
        kind                            "attachment"
        att                             "a.lamp1"
        default-mesh                    <kuid2:36713:40100:1>
      }
      2
      {
        kind                            "attachment"
        att                             "a.lamp2"
        default-mesh                    <kuid2:36713:40100:1>
      }
      3
      {
        kind                            "attachment"
        att                             "a.lamp3"
        default-mesh                    <kuid2:36713:40100:1>
      }
      4
      {
        kind                            "attachment"
        att                             "a.lamp4"
        default-mesh                    <kuid2:36713:40100:1>
      }
      5
      {
        kind                            "attachment"
        att                             "a.lamp5"
        default-mesh                    <kuid2:36713:40100:1>
      }
      6
      {
        kind                            "attachment"
        att                             "a.lamp6"
        default-mesh                    <kuid2:36713:40100:1>
      }
      7
      {
        kind                            "attachment"
        att                             "a.lamp7"
        default-mesh                    <kuid2:36713:40100:1>
      }
      8
      {
        kind                            "attachment"
        att                             "a.lamp8"
        default-mesh                    <kuid2:36713:40100:1>
      }
      9
      {
        kind                            "attachment"
        att                             "a.lamp9"
        default-mesh                    <kuid2:36713:40100:1>
      }
      10
      {
        kind                            "attachment"
        att                             "a.lamp10"
        default-mesh                    <kuid2:36713:40100:1>
      }
      11
      {
        kind                            "attachment"
        att                             "a.lamp11"
        default-mesh                    <kuid2:36713:40100:1>
      }
      12
      {
        kind                            "attachment"
        att                             "a.lamp12"
        default-mesh                    <kuid2:36713:40100:1>
      }
      13
      {
        kind                            "attachment"
        att                             "a.lamp13"
        default-mesh                    <kuid2:36713:40100:1>
      }
      14
      {
        kind                            "attachment"
        att                             "a.lamp14"
        default-mesh                    <kuid2:36713:40100:1>
      }
      15
      {
        kind                            "attachment"
        att                             "a.lamp15"
        default-mesh                    <kuid2:36713:40100:1>
      }
      16
      {
        kind                            "attachment"
        att                             "a.lamp16"
        default-mesh                    <kuid2:36713:40100:1>
      }
      17
      {
        kind                            "attachment"
        att                             "a.lamp17"
        default-mesh                    <kuid2:36713:40100:1>
      }
      18
      {
        kind                            "attachment"
        att                             "a.lamp18"
        default-mesh                    <kuid2:36713:40100:1>
      }
      19
      {
        kind                            "attachment"
        att                             "a.lamp19"
        default-mesh                    <kuid2:36713:40100:1>
      }
      20
      {
        kind                            "attachment"
        att                             "a.lamp20"
        default-mesh                    <kuid2:36713:40100:1>
      }
      21
      {
        kind                            "attachment"
        att                             "a.lamp21"
        default-mesh                    <kuid2:36713:40100:1>
      }
      22
      {
        kind                            "attachment"
        att                             "a.lamp22"
        default-mesh                    <kuid2:36713:40100:1>
      }
      23
      {
        kind                            "attachment"
        att                             "a.lamp23"
        default-mesh                    <kuid2:36713:40100:1>
      }
      24
      {
        kind                            "attachment"
        att                             "a.lamp24"
        default-mesh                    <kuid2:36713:40100:1>
      }
      25
      {
        kind                            "attachment"
        att                             "a.lamp25"
        default-mesh                    <kuid2:36713:40100:1>
      }
    }
  }
  part_2
  {
    mesh                                "Part_2.im"
    auto-create                         1
  }
  part_3
  {
    mesh                                "Part_3.im"
    auto-create                         1
  }
  part_4
  {
    mesh                                "Part_4.im"
    auto-create                         1
  }
  part_5
  {
    mesh                                "Part_5.im"
    auto-create                         1
  }
  part_6
  {
    mesh                                "Part_6.im"
    auto-create                         1
  }
  part_7
  {
    mesh                                "Part_7.im"
    auto-create                         1
  }
  part_8
  {
    mesh                                "Part_8.im"
    auto-create                         1
  }
  part_9
  {
    mesh                                "Part_9.im"
    auto-create                         1
  }
  part_10
  {
    mesh                                "Part_10.im"
    auto-create                         1
  }
  part_11
  {
    mesh                                "Part_11.im"
    auto-create                         1
  }
  part_12
  {
    mesh                                "Part_12.im"
    auto-create                         1
  }
  part_13
  {
    mesh                                "Part_13.im"
    auto-create                         1
  }
  part_14
  {
    mesh                                "Part_14.im"
    auto-create                         1
  }
  part_15
  {
    mesh                                "Part_15.im"
    auto-create                         1
  }
  part_16
  {
    mesh                                "Part_16.im"
    auto-create                         1
  }
  part_17
  {
    mesh                                "Part_17.im"
    auto-create                         1
  }
  part_18
  {
    mesh                                "Part_18.im"
    auto-create                         1
  }
  part_19
  {
    mesh                                "Part_19.im"
    auto-create                         1
  }
  part_20
  {
    mesh                                "Part_20.im"
    auto-create                         1
  }
  part_21
  {
    mesh                                "Part_21.im"
    auto-create                         1
  }
  part_22
  {
    mesh                                "Part_22.im"
    auto-create                         1
  }
  part_23
  {
    mesh                                "Part_23.im"
    auto-create                         1
  }
  part_24
  {
    mesh                                "Part_24.im"
    auto-create                         1
  }
  part_25
  {
    mesh                                "Part_25.im"
    auto-create                         1
  }
  part_26
  {
    mesh                                "Part_26.im"
    auto-create                         1
  }
  part_27
  {
    mesh                                "Part_27.im"
    auto-create                         1
  }
  part_28
  {
    mesh                                "Part_28.im"
    auto-create                         1
  }
  part_29
  {
    mesh                                "Part_29.im"
    auto-create                         1
  }
  part_30
  {
    mesh                                "Part_30.im"
    auto-create                         1
  }
  part_31
  {
    mesh                                "Part_31.im"
    auto-create                         1
  }
  part_32
  {
    mesh                                "Part_32.im"
    auto-create                         1
  }
  part_33
  {
    mesh                                "Part_33.im"
    auto-create                         1
  }
  part_34
  {
    mesh                                "Part_34.im"
    auto-create                         1
  }
  part_35
  {
    mesh                                "Part_35.im"
    auto-create                         1
  }
}
attached-track
{
  track-0
  {
    track                               <kuid:35412:38051>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track0a"
      1                                 "a.track0b"
    }
  }
  track-1
  {
    track                               <kuid:35412:38051>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track1a"
      1                                 "a.track1b"
    }
  }
  track-2
  {
    track                               <kuid:35412:38051>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track2a"
      1                                 "a.track2b"
    }
  }
  track-3
  {
    track                               <kuid:35412:38051>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track3a"
      1                                 "a.track3b"
    }
  }
  track-4
  {
    track                               <kuid:35412:38051>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track4a"
      1                                 "a.track4b"
    }
  }
  track-5
  {
    track                               <kuid:35412:38051>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track5a"
      1                                 "a.track5b"
    }
  }
  track-6
  {
    track                               <kuid:35412:38051>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track6a"
      1                                 "a.track6b"
    }
  }
  track-7
  {
    track                               <kuid:35412:38051>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track7a"
      1                                 "a.track7b"
    }
  }
}
attached-trigger
{
  in_trig1
  {
    att                                 "a.trig0"
    radius                              25
  }
  in_trig2
  {
    att                                 "a.trig1"
    radius                              25
  }
  in_trig3
  {
    att                                 "a.trig2"
    radius                              25
  }
  in_trig4
  {
    att                                 "a.trig3"
    radius                              25
  }
  in_trig5
  {
    att                                 "a.trig4"
    radius                              25
  }
  in_trig6
  {
    att                                 "a.trig5"
    radius                              25
  }
  in_trig7
  {
    att                                 "a.trig6"
    radius                              25
  }
  in_trig8
  {
    att                                 "a.trig7"
    radius                              25
  }
  in_trig9
  {
    att                                 "a.trig8"
    radius                              25
  }
  in_trig10
  {
    att                                 "a.trig9"
    radius                              25
  }
  in_trig11
  {
    att                                 "a.trig10"
    radius                              25
  }
  in_trig12
  {
    att                                 "a.trig11"
    radius                              25
  }
  in_trig13
  {
    att                                 "a.trig12"
    radius                              25
  }
  in_trig14
  {
    att                                 "a.trig13"
    radius                              25
  }
  in_trig15
  {
    att                                 "a.trig14"
    radius                              25
  }
  in_trig16
  {
    att                                 "a.trig15"
    radius                              25
  }
  in_trig17
  {
    att                                 "a.trig16"
    radius                              25
  }
  in_trig18
  {
    att                                 "a.trig17"
    radius                              25
  }
  in_trig19
  {
    att                                 "a.trig18"
    radius                              25
  }
  in_trig20
  {
    att                                 "a.trig19"
    radius                              25
  }
  in_trig21
  {
    att                                 "a.trig20"
    radius                              25
  }
  in_trig22
  {
    att                                 "a.trig21"
    radius                              25
  }
  in_trig23
  {
    att                                 "a.trig22"
    radius                              25
  }
  in_trig24
  {
    att                                 "a.trig23"
    radius                              25
  }
  in_trig25
  {
    att                                 "a.trig24"
    radius                              25
  }
  in_trig26
  {
    att                                 "a.trig25"
    radius                              25
  }
}
queues
{
  prod_q
  {
    size                                1000000
    initial-count                       500000
    product-kuid                        <kuid2:30671:9260111:2>
    allowed-products
    {
      0                                 <kuid2:30671:9260111:2>
    }
  }
}
processes
{
  prod_tipple
  {
    start-enabled                       1
    duration                            30
    outputs
    {
      0
      {
        amount                          0
        queue                           "prod_q"
      }
    }
    inputs
    {
      0
      {
        amount                          0
        queue                           "prod_q"
      }
    }
  }
}
thumbnails
{
  0
  {
    image                               "Two Harbors Ore Dock.jpg"
    width                               240
    height                              180
  }
}
trainz-build                            3.7
username                                "Two_Harbors_Ore_Dock"
category-class                          "BIN"
description                             "This is based on one of two docks at Two Harbors, Minnesota. You must add four
			 switches in surveyor using rail only track. This is a bit tricky but can be done.
			 Two go where the 2-track approach trestle makes the transition to the 4-track bin
			 section. When looking from shore towards the far end the other two form a single
			 crossover from the left track to right track on the 2-track approach trestle. A
			 double crossover is possible though not prototypical.
			 This is interactive to unload hoppers with iron ore (kuid2:30671:9260111:2) on top.
			 It is not interactive to load ore ships at the bottom.
			 This uses kuid2:36713:40100:2 for the lamp posts.

			 VERY IMPORTANT! This is a large and extreamly high poly count item."
author                                  "Benjamin R. Dorsey"
contact-email                           "bendorsey1@att.com"
license                                 "This item is released free of charge for your enjoyment. You may use, redistribute,
and re-skin the model as long as you do not do so for prifit or include it in any package for profit."
kuid-table
{
  0                                     <kuid:35412:38051>
  1                                     <kuid2:36713:40100:1>
  prod                                  <kuid2:30671:9260111:2>
}

Файлы:

d&rgw_planks.jpg	8.0 kB
concrete19.texture.txt	33 B
metal6.texture.txt	29 B
oredump.gs	6.9 kB
metal5.jpg	18.8 kB
metal5.texture.txt	29 B
d&rgw_planks.texture.txt	35 B
metal6.jpg	47.4 kB
coal_load.wav	104.1 kB
concrete19.jpg	295.5 kB
part_17.im	1.2 MB
part_15.im	1.2 MB
part_12.im	1.2 MB
part_11.im	1.2 MB
part_16.im	1.2 MB
part_13.im	1.2 MB
part_20.im	1.2 MB
part_1.im	683.0 kB
part_10.im	1.2 MB
part_14.im	1.2 MB
part_19.im	1.2 MB
part_18.im	1.2 MB
part_3.im	591.1 kB
part_21.im	1.2 MB
part_2.im	2.3 MB
part_31.im	1.2 MB
part_22.im	1.2 MB
part_5.im	626.6 kB
part_34.im	650.0 kB
part_29.im	1.2 MB
part_6.im	578.4 kB
part_4.im	578.4 kB
part_24.im	1.2 MB
part_27.im	1.2 MB
part_7.im	653.5 kB
part_35.im	796.7 kB
part_28.im	1.2 MB
part_25.im	1.2 MB
part_26.im	1.2 MB
part_33.im	1.2 MB
part_23.im	1.2 MB
part_8.im	1.1 MB
rusty iron 3.texture.txt	35 B
wood2.texture.txt	28 B
two harbors ore dock.jpg	10.9 kB
wood2.jpg	23.2 kB
yvrr hopper texture plain.bmp	12.1 kB
yvrr hopper texture plain.texture.txt	48 B
part_32.im	1.2 MB
rusty iron 3.tga	65.0 kB
part_30.im	1.2 MB
part_9.im	1.3 MB
Общий объём файлов:	39.5 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:210518:300490:1>	industry	Two_Harbors_Ore_Dock	3.7	25.10.2021 20:41:44	9.1 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid2:30671:9260111:4>	#30671	product	Iron ore	3.6	1.03.2020 16:00:52	76.6 kB
<kuid2:35412:38051:1>	#35412	track	MB_rail_only_track	1.3	4.03.2020 22:17:56	24.4 kB
<kuid2:36713:40100:1>	#36713	scenery	Light old1	1.5	20.04.2023 12:23:40	22.5 kB
Всего связей: 3, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет