<kuid2:210518:6574:1> New_Hi-Capy_Flat_3_Body

Тип: traincar
Опубликовано: 2.08.2020 9:41:29
Скачиваний: 13
Размер: 208.5 kB

Скачать

This is the body to the third in a series of high capacity depressed center flat cars using
bdneals 8-wheel buckeye trucks (kuid2:96914:50195:3) which can be downloaded from his site
(Subpar Productions) in the 2-6-6-6 common pack. Many thanks to him for letting me use them.
There is an attachment point (a.load0) in the center of this item for those who would like
to make it interactive for the load of your choice. The screenshot shows the assembled traincar.
This car must be assembled in Surveyor:
1. Place this item on the track.
2. Place a New Hi-Capy Flat 3 inner Bolster (kuid2:210518:6575:1) on the track a little past
the ends of the car body.
3. Place a New Hi-Capy Flat 3 Span Bolster (kuid2:210518:6577:1) on the track a little past
the inner bolsters.
4. Place a New Hi-Capy Flat 3 outer bolster (kuid2:210518:6576:1) on the track a little past
the span bolsters.
5. Rotate one span bolster and one outer bolster as needed.
6. Move the outer bolsters under the span bolsters until they couple.
7. Move the inner bolsters under the span bolsters until they couple.
8. Move the span bolster assemblies under the car body until they couple.
9. When properly assembled there should only be one red and one green arrow and the car
should move as a unit.

config.txt:

kuid                                    <kuid2:210518:6574:1>
kind                                    "traincar"
trainz-build                            2.9
engine                                  0
mass                                    40000
enginespec                              <kuid:-1:42004201>
bogeys
{
  0
  {
    bogey                               <kuid:-10:149>
    reversed                            0
    sideplay-permitted                  0
    rotation-permitted                  1
  }
  1
  {
    bogey                               <kuid:-10:149>
    reversed                            0
    sideplay-permitted                  0
    rotation-permitted                  1
  }
}
mesh-table
{
  default
  {
    mesh                                "Part_1.im"
    auto-create                         1
  }
  shadow
  {
    mesh                                "shadow.im"
  }
}
obsolete-table
{
}
thumbnails
{
  0
  {
    image                               "New Hi-Capy Flat 3.jpg"
    width                               240
    height                              180
  }
}
username                                "New_Hi-Capy_Flat_3_Body"
description                             "This is the body to the third in a series of high capacity depressed center flat cars using
		 bdneals 8-wheel buckeye trucks (kuid2:96914:50195:3) which can be downloaded from his site
		 (Subpar Productions) in the 2-6-6-6 common pack. Many thanks to him for letting me use them.
		 There is an attachment point (a.load0) in the center of this item for those who would like
		 to make it interactive for the load of your choice. The screenshot shows the assembled traincar.
		 This car must be assembled in Surveyor:
		 1. Place this item on the track.
		 2. Place a New Hi-Capy Flat 3 inner Bolster (kuid2:210518:6575:1) on the track a little past
		    the ends of the car body.
		 3. Place a New Hi-Capy Flat 3 Span Bolster (kuid2:210518:6577:1) on the track a little past
		    the inner bolsters.
		 4. Place a New Hi-Capy Flat 3 outer bolster (kuid2:210518:6576:1) on the track a little past
		    the span bolsters.
		 5. Rotate one span bolster and one outer bolster as needed.
		 6. Move the outer bolsters under the span bolsters until they couple.
		 7. Move the inner bolsters under the span bolsters until they couple.
		 8. Move the span bolster assemblies under the car body until they couple.
		 9. When properly assembled there should only be one red and one green arrow and the car
		    should move as a unit."
category-class                          "PC"
author                                  "Benjamin R. Dorsey (bendorsey)"
contact-email                           "bendorsey@bellsouth.net"
license                                 "This item is released free of charge for your enjoyment. You may use, redistribute,
and re-skin the model as long as you do not do so for profit or include it in any package for profit."
kuid-table
{
  0                                     <kuid2:30671:90102101:1>
  1                                     <kuid:-10:149>
  2                                     <kuid:-1:42004201>
}

Файлы:

black.bmp	246 B
black.texture.txt	28 B
new hi-capy flat 3.jpg	11.9 kB
part_1.im	428.3 kB
shadow.im	425.8 kB
Общий объём файлов:	866.3 kB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:210518:6574:1>	traincar	New_Hi-Capy_Flat_3_Body	2.9	2.08.2020 9:41:29	208.5 kB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-10:149>	#-10	bogey	Тележка_невидимая	0	18.04.2023 0:03:42	1.4 kB
<kuid:-1:42004201>	#-1	engine	Типовой вагон	0	1.03.2023 22:53:14	2.4 kB
<kuid2:30671:90102101:2>	#30671	product	Cattle	2	20.06.2020 23:17:00	71.6 kB
Всего связей: 3, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет