<kuid2:210518:6557:1> 3_bogey_boxcar_body_1

Тип: traincar
Опубликовано: 17.07.2020 10:21:24
Скачиваний: 31
Размер: 404.9 kB

Скачать

This is the body of a 3-bogey boxcar circa 1850 with one door per side with and changeable lettering.
The third bogey slid from side to side. This is not a car for sharp curves which is probably why they didn't last very long.
To assemble this car in Surveyor:
1. Place this item on the tracks.
2. Place a 3_bogey_boxcar_bolster (kuid2:210518:6556:1) on the tracks beyond the car body end without a bogey.
3. Rotate the bolster if necessary.
4. Move the bolster under the car.
5. When properly positioned there will only be one red and one green arrow, the end bogies will be at equal distances
from the ends of the car, the third bogey will be in the center, all bogies will track the center of the rails, and the car will
move as a unit..

config.txt:

kuid                                    <kuid2:210518:6557:1>
origin                                  "USA"
name                                    "3_bogey_boxcar_body_1"
kind                                    "traincar"
region                                  "USA"
mass                                    250000
engine                                  0
fonts                                   0
enginespec                              <kuid:-1:42004201>
bogey                                   <kuid2:86661:50050:1>
bogey-1                                 <kuid:-10:149>
kuid-table
{
  0                                     <kuid:-10:149>
  1                                     <kuid2:86661:50050:1>
}
mesh-table
{
  default
  {
    mesh                                "Part_1.im"
    auto-create                         1
    effects
    {
      0
      {
        kind                            "name"
        fontsize                        0.25
        fontcolor                       0,0,0
        att                             "a.name0"
        name                            "RR NAME"
      }
      1
      {
        kind                            "name"
        fontsize                        0.25
        fontcolor                       0,0,0
        att                             "a.name1"
        name                            "RR NAME"
      }
      2
      {
        kind                            "name"
        fontsize                        0.25
        fontcolor                       0,0,0
        att                             "a.name2"
        name                            "CAR NUM"
      }
      3
      {
        kind                            "name"
        fontsize                        0.25
        fontcolor                       0,0,0
        att                             "a.name3"
        name                            "CAR NUM"
      }
      4
      {
        kind                            "name"
        fontsize                        0.1
        fontcolor                       0,0,0
        att                             "a.name4"
        name                            "RR NAME"
      }
      5
      {
        kind                            "name"
        fontsize                        0.1
        fontcolor                       0,0,0
        att                             "a.name5"
        name                            "RR NAME"
      }
      6
      {
        kind                            "name"
        fontsize                        0.1
        fontcolor                       0,0,0
        att                             "a.name6"
        name                            "CAR NUM"
      }
      7
      {
        kind                            "name"
        fontsize                        0.1
        fontcolor                       0,0,0
        att                             "a.name7"
        name                            "CAR NUM"
      }
    }
  }
  part_2
  {
    mesh                                "Part_2.im"
    auto-create                         1
  }
}
obsolete-table
{
}
description                             "This is the body of a 3-bogey boxcar circa 1850 with one door per side with and changeable lettering.
The third bogey slid from side to side. This is not a car for sharp curves which is probably why they didn't last very long.
To assemble this car in Surveyor:
1.  Place this item on the tracks.
2.  Place a 3_bogey_boxcar_bolster (kuid2:210518:6556:1) on the tracks beyond the car body end without a bogey.
3.  Rotate the bolster if necessary.
4.  Move the bolster under the car.
5.  When properly positioned there will only be one red and one green arrow, the end bogies will be at equal distances
from the ends of the car, the third bogey will be in the center, all bogies will track the center of the rails, and the car will
move as a unit.."
trainz-build                            2.4
category-class                          "XFH"
category-region-0                       "US"
category-era-0                          "1850s"
category-era-1                          "1860s"
category-era-2                          "1870s"
category-era-3                          "1880s"
category-era-4                          "1890s"
asset-filename                          "3_bogey_boxcar_1"
username                                "3_bogey_boxcar_body_1"
folder-icon                             "6"
thumbnail                               
author                                  "Benjamin R. Dorsey"
organisation                            "None"
contact-email                           "www.bendorsey@bellsouth.net"
contact-website                         ""
license                                 "This item is offered free of charge for your enjoyment. It may not be sold or used in any commercial venture. It may be re-skinned for your personal use."

Файлы:

black.bmp	3.1 kB
black.texture.txt	28 B
part_1.im	415.7 kB
part_2.im	761.4 kB
wood35 (plain).jpg	2.9 kB
wood35 (plain).texture.txt	37 B
wood35.jpg	27.4 kB
wood35.texture.txt	29 B
Общий объём файлов:	1.2 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:210518:6557:1>	traincar	3_bogey_boxcar_body_1	2.4	17.07.2020 10:21:24	404.9 kB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-10:149>	#-10	bogey	Тележка_невидимая	0	18.04.2023 0:03:42	1.4 kB
<kuid2:86661:50050:3>	#86661	bogey	archbar_bogey_33	2.2	24.06.2020 9:50:22	452.5 kB
Всего связей: 2, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет