<kuid2:210518:6538:1> NASA_SRB_Car_2

Тип: traincar
Опубликовано: 17.07.2020 8:49:43
Скачиваний: 19
Размер: 22.9 kB

Скачать

This is the body section (the pic shows the complete car) of an interactive articulated
special purpose flat car (lettered for the Florida East Coast Railroad) with four 4-wheel roller bearing bogeys.
There are two attachment points (a.load0 and a.load1) in the center of the car. They will load NASA_SRB_Load_1
(kuid2:210518:6539:1) or NASA_SRB_Load_2 (kuid2:210518:6543:1) but not both at the same time. Many thanks
to Conn McCarthy for the use of his 36in 100t Trucks. Assemble this car in Surveyor as follows:
1. Place NASA_SRB_Car_1 (this item) on the track.
2. Place one NASA_SRB_Front_Bolster on the track beyond end of the body with the foreward arrow.
3. Place one NASA_SRB_Car_Rear_Bolster on the track beyond the other end of the car.
4. Rotate one bolster 180 degrees to get the coupler facing outward.
5. Move the bolsters under the ends of the body.
6. When properly assembled there will only be 1 red and 1 green arrow and the car will move as a unit.

config.txt:

kuid                                    <kuid2:210518:6538:1>
origin                                  "USA"
name                                    "NASA_SRB_Car_2"
kind                                    "traincar"
region                                  "USA"
mass                                    60000
engine                                  0
fonts                                   0
enginespec                              <kuid:-1:42004201>
bogey                                   <kuid:-10:149>
bogey-1                                 <kuid:-10:149>
icon0                                   <kuid:-3:10164>
kuid-table
{
  0                                     <kuid:-10:149>
  1                                     <kuid:-3:10164>
}
mesh-table
{
  default
  {
    mesh                                "NASA_SRB_Carbody_2.im"
    auto-create                         1
    effects
    {
      0
      {
        kind                            "name"
        fontsize                        0.2
        fontcolor                       255,0,0
        att                             "a.name0"
        name                            "C U S H I O N E D   L O A D"
      }
      1
      {
        kind                            "name"
        fontsize                        0.2
        fontcolor                       255,0,0
        att                             "a.name1"
        name                            "C U S H I O N E D   L O A D"
      }
      2
      {
        kind                            "name"
        fontsize                        0.15
        fontcolor                       0,0,0
        att                             "a.name2"
        name                            "FEC 100"
      }
      3
      {
        kind                            "name"
        fontsize                        0.15
        fontcolor                       0,0,0
        att                             "a.name3"
        name                            "FEC 100"
      }
      4
      {
        kind                            "name"
        fontsize                        0.15
        fontcolor                       0,0,0
        att                             "a.name4"
        name                            "FEC"
      }
      5
      {
        kind                            "name"
        fontsize                        0.15
        fontcolor                       0,0,0
        att                             "a.name5"
        name                            "FEC"
      }
      6
      {
        kind                            "name"
        fontsize                        0.05
        fontcolor                       0,0,0
        att                             "a.name6"
        name                            "CAPY"
      }
      7
      {
        kind                            "name"
        fontsize                        0.05
        fontcolor                       0,0,0
        att                             "a.name7"
        name                            "CAPY"
      }
      8
      {
        kind                            "name"
        fontsize                        0.05
        fontcolor                       0,0,0
        att                             "a.name8"
        name                            "LD LIMIT"
      }
      9
      {
        kind                            "name"
        fontsize                        0.05
        fontcolor                       0,0,0
        att                             "a.name9"
        name                            "LD LIMIT"
      }
      10
      {
        kind                            "name"
        fontsize                        0.05
        fontcolor                       0,0,0
        att                             "a.name10"
        name                            "LT WT"
      }
      11
      {
        kind                            "name"
        fontsize                        0.05
        fontcolor                       0,0,0
        att                             "a.name11"
        name                            "LT WT"
      }
    }
  }
}
obsolete-table
{
}
queues
{
  load0
  {
    size                                1
    initial-count                       0
    attachment-points
    {
      0                                 "a.load0"
    }
    allowed-products
    {
      0                                 <kuid2:210518:6539:1>
    }
    conflicts-with-queues
    {
      0                                 "load1"
    }
  }
  load1
  {
    size                                1
    initial-count                       0
    attachment-points
    {
      0                                 "a.load1"
    }
    allowed-products
    {
      0                                 <kuid2:210518:6543:1>
    }
    conflicts-with-queues
    {
      0                                 "load0"
    }
  }
}
string-table
{
  maxweight                             200000
}
description                             "This is the body section (the pic shows the complete car) of an interactive articulated
special purpose flat car (lettered for the Florida East Coast Railroad) with four 4-wheel roller bearing bogeys.
There are two attachment points (a.load0 and a.load1) in the center of the car. They will load NASA_SRB_Load_1
(kuid2:210518:6539:1) or NASA_SRB_Load_2 (kuid2:210518:6543:1) but not both at the same time. Many thanks
to Conn McCarthy for the use of his 36in 100t Trucks. Assemble this car in Surveyor as follows:
1.  Place NASA_SRB_Car_1 (this item) on the track.
2.  Place one NASA_SRB_Front_Bolster on the track beyond end of the body with the foreward arrow.
3.  Place one NASA_SRB_Car_Rear_Bolster on the track beyond the other end of the car.
4.  Rotate one bolster 180 degrees to get the coupler facing outward.
5.  Move the bolsters under the ends of the body.
6.  When properly assembled there will only be 1 red and 1 green arrow and the car will move as a unit."
trainz-build                            2.4
category-class                          "XFH"
category-region-0                       "US"
category-era-0                          "1980s"
category-era-1                          "1990s"
category-era-2                          "2000s"
category-era-3                          "2010s"
asset-filename                          "NASA_SRB_Car_2"
username                                "NASA_SRB_Car_2"
folder-icon                             "6"
thumbnail                               
author                                  "Benjamin R. Dorsey"
organisation                            "None"
contact-email                           "www.bendorsey@bellsouth.net"
contact-website                         ""
license                                 "This item is offered free of charge for your enjoyment. It may not be sold or used in any commercial venture. It may be re-skinned for your personal use."

Файлы:

brass.bmp	822 B
brass.texture.txt	28 B
nasa_srb_carbody_2.im	42.3 kB
Общий объём файлов:	43.2 kB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:210518:6538:1>	traincar	NASA_SRB_Car_2	2.4	17.07.2020 8:49:43	22.9 kB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-10:149>	#-10	bogey	Тележка_невидимая	0	18.04.2023 0:03:42	1.4 kB
<kuid:-3:10164>	#-3	texture	IndustryObjectIcon	0	12.06.2020 19:16:45	2.0 kB
Всего связей: 2, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет