<kuid2:210518:1502:1> Rail_Boat_Bridge_1

Тип: Переезд
Опубликовано: 14.07.2020 9:01:10
Скачиваний: 34
Размер: 648.6 kB

Скачать

This is an interactive swing bridge for boats and trains. This takes 600 keyframes
(approximately 20 seconds) to close so don't drive too fast. The bridge operators shack is built-in.
The blue invisible tracks are at ground level (z axis = 0 ft 0.0 in).
The green invisible tracks are at z axis = -10 meters (-32 ft 9.0 in) below ground level.
Water level should be set at -3 meters (-9 ft 10 in) below ground level.

NOTE!!! This is offered as an experiment for downloaders to make completely interactive. You will have to add
visible and invisible tracks to cross the span then place triggers, signals, etc plus do some rule setting. Once someone
gets it working correctly I would appreciate it they would write a short README file listing the steps necessary and sending it to me
so I can include it in an updated version of this bridge and with several others I've yet to make. Thanks.

config.txt:

kuid                                    <kuid2:210518:1502:1>
type                                    "trackside"
kind                                    "mocrossing"
light                                   1
height-range                            -30,30
kuid-table
{
  0                                     <kuid:60238:37037>
  1                                     <kuid:60238:37038>
}
obsolete-table
{
}
mesh-table
{
  default
  {
    mesh                                "bascule.im"
    anim                                "anim.kin"
    auto-create                         1
  }
}
attached-track
{
  track-0
  {
    track                               <kuid:60238:37038>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track0a"
      1                                 "a.track0b"
    }
  }
  track-1
  {
    track                               <kuid:60238:37037>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track1a"
      1                                 "a.track1b"
    }
  }
  track-2
  {
    track                               <kuid:60238:37037>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track2a"
      1                                 "a.track2b"
    }
  }
  track-3
  {
    track                               <kuid:60238:37038>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track3a"
      1                                 "a.track3b"
    }
  }
}
trainz-build                            2.4
category-region-0                       "US"
category-era-0                          1900
category-era-1                          1910
category-era-2                          1920
category-era-3                          1930
category-era-4                          1940
category-era-5                          1950
category-era-6                          1960
category-era-7                          1970
category-era-8                          1980
category-era-9                          1990
category-era-10                         2000
region                                  "US"
asset-filename                          "Rail_Boat_Bridge_1"
category-class                          "TR"
description                             "This is an interactive swing bridge for boats and trains. This takes 600 keyframes
(approximately 20 seconds) to close so don't drive too fast. The bridge operators shack is built-in.
The blue invisible tracks are at ground level (z axis = 0 ft 0.0 in).
The green invisible tracks are at z axis = -10 meters (-32 ft 9.0 in) below ground level.
Water level should be set at -3 meters (-9 ft 10 in) below ground level.

NOTE!!!  This is offered as an experiment for downloaders to make completely interactive. You will have to add
visible and invisible tracks to cross the span then place triggers, signals, etc plus do some rule setting. Once someone
gets it working correctly I would appreciate it they would write a short README file listing the steps necessary and sending it to me
so I can include it in an updated version of this bridge and with several others I've yet to make. Thanks."
username                                "Rail_Boat_Bridge_1"
folder-icon                             "6"
thumbnail                               
author                                  "Benjamin R. Dorsey"
organisation                            "None"
contact-email                           "www.bendorsey@bellsouth.net"
contact-website                         ""
license                                 "This item is offered free of charge for your enjoyment. It may not be sold or used in any commercial venture. It may be re-skinned for your personal use."

Файлы:

anim.kin	42.4 kB
bascule.im	1.3 MB
black.bmp	3.1 kB
black.texture.txt	28 B
concrete3.jpg	52.6 kB
concrete3.texture.txt	32 B
door1.jpg	23.5 kB
door1.texture.txt	28 B
rail.texture.txt	27 B
rail.tga	6.0 kB
railroad_ties-railroad_ties.texture.txt	61 B
railroad_ties.bmp	96.1 kB
railroad_ties.tga	97.0 kB
sg_timber42c-128.bmp	48.1 kB
sg_timber42c-128.texture.txt	39 B
shingle1.jpg	55.2 kB
shingle1.texture.txt	31 B
wall10.jpg	68.9 kB
wall10.texture.txt	29 B
window9.bmp	96.1 kB
window9.texture.txt	30 B
wood2.jpg	23.2 kB
wood2.texture.txt	28 B
Общий объём файлов:	1.9 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:210518:1502:1>	mocrossing	Rail_Boat_Bridge_1	2.4	14.07.2020 9:01:10	648.6 kB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid2:60238:37037:3>	#60238	track	Track Blue Invisible in Driver	3.5	17.05.2020 16:33:29	12.8 kB
<kuid2:60238:37038:4>	#60238	track	Track Green Invisible in Driver	3.5	23.01.2024 23:01:15	21.5 kB
Всего связей: 2, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет