This is a full circle roundhouse with 58 stalls and 2 access tracks in 6 degree increments with a 130 ft turntable.
Full circle roundhouses were rare but some did exist. When traffic generated a need for more stalls railroads preffered building another
half circle roundhouse (prefferably on the other side of the tracks to avoid engines having to constantly cross the main line). The more
stalls a roundhouse has the more the turntable is used. In a full circle roundhouse the turntable itself becomes a bottle neck.
Occasionally there wasn't room for the second roundhouse so a full circle one was built.
NOTE!!! This item can be modified after download by manipulating the config file mesh-table. As downloaded all stalls have rear walls
with 4 windows and the smoke jacks are toward the front of the stalls. Extra image files are in the folder so two rear walls can be
replaced by walls with a locomotive sized open door, smoke jacks can be moved to the rear of the stalls, or smoke jacks can be at the
front and rear of the stalls.
In the config file mesh-table:
1. To put the smoke jacks at the rear of the stalls, change Part_7 to Part_8 (in 2 places).
2. To put the smoke kacks at both the front and rear of the stalls, change Part_7 to Part_9 (in 2 places).
3. To replace the windowed rear wall with a doored rear wall for stall 1, change Part_10 to Part_12 (in 2 places).
4. To replace the windowed rear wall with a doored rear wall for stall 30, change Part_11 to Part_13 (in 2 places).
Connect tracks as desired (to repair facilities for example). Don't delete the unused files (you might want to go back).