<kuid:186372:110114> CNJ 840 loco cab interior

Тип: Кабина
Опубликовано: 4.11.2021 11:53:18
Скачиваний: 195
Размер: 89.3 MB

Скачать

I found no real information on the cab layout so I just used a layout similar to other Baldwin cabs of the period.

config.txt:

kind                                    "interior"
kuid                                    <kuid:186372:110114>
username                                "CNJ 840 loco cab interior"
trainz-build                            4.8
category-class                          "ZI"
category-region                         "US"
category-era                            "1900s;1910s;1920s;1930s;1940s;1950s"
script                                  "cnj840_cab"
class                                   "CNJ840_Cabin"
mesh-table
{
  default
  {
    auto-create                         1
    mesh                                "840_cab.trainzmesh"
  }
  the_bell
  {
    anim                                "bell_scene.kin"
    mesh                                "bell.trainzmesh"
    att                                 "a.bell"
    auto-create                         1
    animation-loop-speed                0
  }
  bell
  {
    mesh                                "bell_cord.trainzmesh"
    att-parent                          "default"
    att                                 "a.bell-cord"
    tooltip-token                       "bel"
    kind                                "animated-lever"
    auto-create                         1
    limits                              -1,1
    anim                                "bell_cord_scene.kin"
  }
  bell_cord_collision_box
  {
    collision-parent                    "bell"
    att-parent                          "default"
    kind                                "collision-proxy"
    mesh                                "bell_collision_box.trainzmesh"
    att                                 "a.bell_collision_box"
    auto-create                         1
    opacity                             0
  }
  blowdown_lever
  {
    mesh                                "cylinder_cocks_lever.trainzmesh"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.cylinder_cocks"
    auto-create                         1
    tooltip-token                       "cyl"
    angles                              -0.2,0
    notches                             0,1
  }
  boiler_needle
  {
    kind                                "needle"
    mesh                                "needle1.trainzmesh"
    att-parent                          "default"
    att                                 "a.boiler_pressure_needle"
    limits                              0,2068
    auto-create                         1
    angles                              0,4,7
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "needle2.trainzmesh"
    att-parent                          "default"
    att                                 "a.locobrakepressure_needle"
    auto-create                         1
    limits                              0,689.47998
    tooltip-token                       "tbp"
    angles                              0,3.91
  }
  independantbrake_lever
  {
    mesh                                "loco_brake.trainzmesh"
    att                                 "a.independent-brake-lever"
    auto-create                         1
    kind                                "lever"
    tooltip-token                       "ibl"
    angles                              0,0.9
    radius                              0.25
    notchheight                         1,1,1,1,1
    notches                             0,0.25,0.5,0.75,1
    limits                              0,4
    att-parent                          "default"
  }
  trainbrake_lever
  {
    mesh                                "train_brake.trainzmesh"
    att                                 "a.trainbrakelever2"
    auto-create                         1
    kind                                "lever"
    tooltip-token                       "tb"
    angles                              0,-2
    radius                              0.25
    notchheight                         1,1,1,1,1
    notches                             0,0.25,0.5,0.75,1
    limits                              0,4
    att-parent                          "default"
  }
  coal-load
  {
    mesh                                "coal-load.trainzmesh"
    att-parent                          "default"
    att                                 "a.coal-load"
    auto-create                         1
    anim                                "coal-load_scene.kin"
  }
  door_left
  {
    mesh                                "cab_door_left.trainzmesh"
    att                                 "a.door_left"
    att-parent                          "default"
    auto-create                         1
    kind                                "lever"
    angles                              0,1.745
    notches                             0,1
    notchheight                         1,1
    tooltip-token                       "dl"
  }
  door_right
  {
    mesh                                "cab_door_right.trainzmesh"
    att                                 "a.door_right"
    att-parent                          "default"
    kind                                "lever"
    auto-create                         1
    angles                              0,-1.745
    notches                             0,1
    notchheight                         1,1
    tooltip-token                       "dr"
  }
  fire_plates
  {
    mesh                                "firebox_door.trainzmesh"
    anim                                "firebox_door_scene.kin"
    kind                                "animated-lever"
    att-parent                          "default"
    att                                 "a.fire_plates"
    auto-create                         1
    tooltip-token                       "fp"
  }
  fire_plates_collision_box
  {
    collision-parent                    "fire_plates"
    att-parent                          "fire_plates"
    kind                                "collision-proxy"
    mesh                                "firedoor_collision_box.trainzmesh"
    att                                 "a.firebox_door_cb"
    auto-create                         1
    opacity                             0
  }
  firebox_knob1
  {
    mesh                                "handle1.trainzmesh"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.firebox_right_lower_knob"
    auto-create                         1
    angles                              1.57,-1.57
  }
  firebox_knob2
  {
    mesh                                "handle1.trainzmesh"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.firebox_right_middle_knob"
    angles                              1.57,-1.57
    auto-create                         1
  }
  firebox_knob3
  {
    mesh                                "knob2.trainzmesh"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.firebox_right_top_knob"
    angles                              1.57,-1.57
    auto-create                         1
  }
  firebox_knob4
  {
    mesh                                "knob2.trainzmesh"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.bulbvalvehandle1"
    angles                              1.57,-1.57
    auto-create                         1
  }
  water_injector_0
  {
    kind                                "animated-lever"
    att-parent                          "default"
    att                                 "a.injector_left"
    auto-create                         1
    limits                              -1,1
    tooltip-token                       "linj"
    mesh                                "injector.trainzmesh"
    anim                                "injector_scene.kin"
  }
  injector_left_handle2
  {
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.injector_left_handle2"
    auto-create                         1
    limits                              -1,1
    tooltip-token                       "linjd"
    angles                              1.57,-1.57
    notches                             0,1
    notchheight                         1,1
    mesh                                "knob2.trainzmesh"
  }
  water_injector_1
  {
    kind                                "animated-lever"
    att-parent                          "default"
    att                                 "a.injector_right"
    auto-create                         1
    limits                              -1,1
    tooltip-token                       "rinj"
    mesh                                "injector.trainzmesh"
    anim                                "injector_scene.kin"
  }
  injector_right_handle2
  {
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.injector_right_handle2"
    auto-create                         1
    limits                              -1,1
    tooltip-token                       "rinjd"
    angles                              1.57,-1.57
    notches                             0,1
    notchheight                         1,1
    mesh                                "knob2.trainzmesh"
  }
  lube_filler_plug_lever
  {
    mesh                                "knob3.trainzmesh"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.lb_filler_plug"
    angles                              1.57,-1.57
    notches                             0,1
    notchheight                         1,1
    auto-create                         1
  }
  lube_knob1
  {
    mesh                                "knob5.trainzmesh"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.lb_feed_reg_valve_to_cyl2"
    angles                              1.57,-1.57
    notches                             0,1
    notchheight                         1,1
    auto-create                         1
  }
  lube_knob2
  {
    mesh                                "knob5.trainzmesh"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.lb_feed_reg_valve_to_air_pump"
    angles                              1.57,-1.57
    notches                             0,1
    notchheight                         1,1
    auto-create                         1
  }
  lube_knob3
  {
    mesh                                "knob5.trainzmesh"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.lb_feed_reg_valve_to_cyl1"
    angles                              1.57,-1.57
    notches                             0,1
    notchheight                         1,1
    auto-create                         1
  }
  lube_knob4
  {
    mesh                                "knob5.trainzmesh"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.lb_water_feed_valve"
    angles                              1.57,-1.57
    notches                             0,1
    notchheight                         1,1
    auto-create                         1
  }
  lube_knob5
  {
    mesh                                "knob6.trainzmesh"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.lb_steam_valve"
    angles                              1.57,-1.57
    notches                             0,1
    notchheight                         1,1
    auto-create                         1
  }
  manifold1
  {
    mesh                                "knob1.trainzmesh"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.manifold-wheel-left"
    angles                              1.57,-1.57
    notches                             0,1
    notchheight                         1,1
    auto-create                         1
  }
  manifold2
  {
    mesh                                "knob1.trainzmesh"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.manifold-wheel-right"
    angles                              1.57,-1.57
    notches                             0,1
    notchheight                         1,1
    auto-create                         1
  }
  regulator
  {
    mesh                                "regulator.trainzmesh"
    anim                                "regulator_scene.kin"
    kind                                "animated-lever"
    att-parent                          "default"
    att                                 "a.regulator"
    auto-create                         1
    tooltip-token                       "reg"
  }
  regulator_collision_box
  {
    collision-parent                    "regulator"
    att-parent                          "regulator"
    kind                                "collision-proxy"
    mesh                                "regulator-collision-box.trainzmesh"
    att                                 "a.regulator_handle_cb"
    auto-create                         1
    opacity                             0
  }
  reverser
  {
    mesh                                "reverser.trainzmesh"
    anim                                "reverser_scene.kin"
    kind                                "animated-lever"
    att-parent                          "default"
    att                                 "a.reverser"
    auto-create                         1
    tooltip-token                       "rev"
    limits                              -1,1
  }
  reverser_collision_box
  {
    collision-parent                    "reverser"
    att-parent                          "reverser"
    kind                                "collision-proxy"
    mesh                                "reverser-collision-box.trainzmesh"
    att                                 "a.reverser_handle_cb"
    auto-create                         1
    opacity                             0
  }
  roof_hatch_left
  {
    mesh                                "roof_cover_left.trainzmesh"
    att                                 "a.roof-cover-left"
    att-parent                          "default"
    auto-create                         1
    tooltip-token                       "lcr"
    kind                                "animated-lever"
    anim                                "roof_cover_left_scene.kin"
  }
  roof_hatch_right
  {
    mesh                                "roof_cover_right.trainzmesh"
    att                                 "a.roof-cover-right"
    att-parent                          "default"
    auto-create                         1
    tooltip-token                       "rcr"
    anim                                "roof_cover_right_scene.kin"
    kind                                "animated-lever"
  }
  sanding_lever
  {
    mesh                                "sander-handle.trainzmesh"
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.sander_valve"
    auto-create                         1
    tooltip-token                       "san"
    angles                              -0.7,0.7
    notches                             0,1
    notchheight                         1,1
    radius                              0.2
    limits                              0,1
  }
  speedo_needle
  {
    mesh                                "needle2.trainzmesh"
    att-parent                          "default"
    att                                 "a.speedo_needle"
    tooltip-token                       "spd"
    limits                              0,26.67
    auto-create                         1
    kind                                "needle"
    angles                              0,4.7
  }
  water_drain_left
  {
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.water_drain_lower_left"
    tooltip-token                       "lwd"
    auto-create                         1
    mesh                                "handle2.trainzmesh"
    notches                             0,1
    notchheight                         1,1
    angles                              0,6.2
  }
  water_drain_right
  {
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.water_drain_lower_right"
    tooltip-token                       "rwd"
    auto-create                         1
    mesh                                "handle2.trainzmesh"
    notches                             0,1
    notchheight                         1,1
    angles                              0,6.2
  }
  waterglass_left
  {
    kind                                "animated-dial"
    att-parent                          "default"
    att                                 "a.water_level_left"
    auto-create                         1
    tooltip-token                       "wl"
    anim                                "water_level_scene.kin"
    mesh                                "water_level.trainzmesh"
    radius                              0.1
  }
  waterglass_right
  {
    kind                                "animated-dial"
    att-parent                          "default"
    att                                 "a.water_level_right"
    auto-create                         1
    tooltip-token                       "wl"
    mesh                                "water_level.trainzmesh"
    radius                              0.1
    anim                                "water_level_scene.kin"
  }
  water_level_handle_upper_left
  {
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.water_level_upper_handle_left"
    tooltip-token                       "wi"
    auto-create                         1
    mesh                                "sight-glass-handle.trainzmesh"
    notches                             0,1
    notchheight                         1,1
    angles                              -1.6,0
  }
  water_level_handle_upper_right
  {
    kind                                "lever"
    att-parent                          "default"
    att                                 "a.water_level_upper_handle_right"
    tooltip-token                       "wi"
    auto-create                         1
    mesh                                "sight-glass-handle.trainzmesh"
    notches                             0,1
    notchheight                         1,1
    angles                              -1.6,0
  }
  horn
  {
    mesh                                "whistle-cord.trainzmesh"
    att-parent                          "default"
    att                                 "a.whistle-cord"
    tooltip-token                       "hor"
    kind                                "animated-lever"
    auto-create                         1
    limits                              -1,1
    anim                                "whistle-cord_scene.kin"
  }
  horn_collision_box
  {
    collision-parent                    "horn"
    att-parent                          "default"
    kind                                "collision-proxy"
    mesh                                "whistle-collision-box.trainzmesh"
    att                                 "a.whistle_collision_box"
    auto-create                         1
    opacity                             0
  }
  left_window
  {
    anim                                "front_window_left_scene.kin"
    mesh                                "front_window_left.trainzmesh"
    att                                 "a.front_window_left"
    att-parent                          "default"
    kind                                "animated-lever"
    auto-create                         1
    tooltip-token                       "lfw"
  }
  right_window
  {
    mesh                                "front_window_right.trainzmesh"
    anim                                "front_window_right_scene.kin"
    att                                 "a.front_window_right"
    kind                                "animated-lever"
    att-parent                          "default"
    auto-create                         1
    tooltip-token                       "rfw"
  }
  left_sliding_window
  {
    mesh                                "side_window_left.trainzmesh"
    att                                 "a.side_window_left"
    kind                                "animated-lever"
    att-parent                          "default"
    auto-create                         1
    tooltip-token                       "lcw"
    anim                                "side_window_left_scene.kin"
  }
  right_sliding_window
  {
    kind                                "animated-lever"
    mesh                                "side_window_right.trainzmesh"
    att                                 "a.side_window_right"
    att-parent                          "default"
    auto-create                         1
    anim                                "side_window_right_scene.kin"
    tooltip-token                       "rcw"
  }
  coal_hatch_left
  {
    kind                                "animated-lever"
    mesh                                "coal-hatch.trainzmesh"
    att                                 "a.coal-hatch-left"
    att-parent                          "default"
    auto-create                         1
    anim                                "coal-hatch_scene.kin"
    tooltip-token                       "cfl"
    mousespeed                          1
    limits                              0,1
  }
  coal_hatch_right
  {
    kind                                "animated-lever"
    mesh                                "coal-hatch.trainzmesh"
    att                                 "a.coal-hatch-right"
    att-parent                          "default"
    auto-create                         1
    anim                                "coal-hatch_scene.kin"
    tooltip-token                       "cfr"
    limits                              0,1
    mousespeed                          1
  }
  loose_coal
  {
    mesh                                "loose-coal.trainzmesh"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.loose_coal"
  }
  firebox
  {
    att-parent                          "default"
    att                                 "a.fire"
    mesh                                "fire\fire.trainzmesh"
    anim                                "fire\fire_scene.kin"
    auto-create                         1
    animation-loop-speed                2
  }
}
enable-shadows-in-cab                   0
cameralist
{
  camera0                               -1.164,2.9,3.352,-0.156,-0.146
  camera1                               -1.164,2.9,3.352,0.678,-0.302
  camera2                               1.051,2.9,3.09,0.042,-0.03
  camera3                               1.051,2.9,3.052,-1.122,-0.612
}
cameradefault                           0
interior-controls-type                  "full"
mesh-table-lod-transition-distances     "1000"
string-table
{
  dl                                    "Left cab door"
  dr                                    "Right cab door"
  bel                                   "Bell"
  lfw                                   "Left front window"
  rfw                                   "Right front window"
  lcw                                   "Left cab window"
  rcw                                   "Right cab window"
  lcr                                   "Left cab roof vent"
  rcr                                   "Right cab roof vent"
  rev                                   "Reverser"
  reg                                   "Regulator"
  wl                                    "Water level"
  wd                                    "Water drain"
  linjd                                 "Left injector drain"
  linj                                  "Left injector"
  rinjd                                 "Right injector drain"
  rinj                                  "Right injector"
  lwd                                   "Left water drain"
  rwd                                   "Right water drain"
  tb                                    "Train brake"
  ibl                                   "Independent brake lever"
  fp                                    "Fire plates"
  wi                                    "Water inlet"
  lub                                   "Lubricator"
  san                                   "Sander"
  cyl                                   "Cylinder cocks"
  spd                                   "Speedometer"
  tbp                                   "Loco brake pressure"
  cfl                                   "Left coal hatch"
  cfr                                   "Right coal hatch"
  hor                                   "Horn"
}
description                             "I found no real information on the cab layout so I just used a layout similar to other Baldwin cabs of the period."
author                                  "Paul Cass (PCAS1986)"
contact-email                           "via Trainz forums"
license                                 "Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0). Put more simply, this license permits the users to do most anything with this asset providing you acknowledge me (pcas1986) as the original author.  If you want the source data then just ask me nicely and I will probably provide it."
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               240
    height                              180
  }
}
kuid-table
{
}

Файлы:

fire
fire / fire_scene.kin	3.2 kB
fire / fire_parameter.texture.txt	62 B
fire / fire_parameter.tga	512.0 kB
fire / fire.trainzmesh	2.9 kB
fire / fire_normal.texture.txt	80 B
fire / fire_parameter.png	48.9 kB
fire / fire_normal.tga	512.0 kB
fire / fire.tga	512.5 kB
fire / fire.texture.txt	42 B
bell_collision_box.trainzmesh	1.2 kB
cnj840_cab.txt	7.0 kB
cab_door_right.trainzmesh	12.0 kB
cab_door_left.trainzmesh	12.0 kB
bell_scene.kin	15.3 kB
bell_cord_scene.kin	18.6 kB
bell-cord.fbx	53.8 kB
bell_collision_box.fbx	14.3 kB
cab_door_left.fbx	37.3 kB
bell_cord.trainzmesh	103.9 kB
mat1_normal.texture.txt	77 B
mat1_parameter.texture.txt	63 B
mat1_albedo.texture.txt	34 B
$screenshot$.jpg	27.1 kB
bell_cord.fbx	124.4 kB
10cm_collision_box.trainzmesh	1.2 kB
mat1_albedo.png	98.6 kB
loose-coal.trainzmesh	412.1 kB
mat2_albedo.texture.txt	34 B
mat2_parameter.texture.txt	63 B
bell.fbx	187.4 kB
bell.trainzmesh	230.8 kB
10cm_collision_box.fbx	14.5 kB
firebox_door_scene.kin	8.1 kB
handle1.trainzmesh	14.6 kB
bell-cord.trainzmesh	73.3 kB
mat2_normal.texture.txt	77 B
mat3_albedo.texture.txt	34 B
mat3_normal.texture.txt	77 B
loco_brake.fbx	34.5 kB
handle1.fbx	26.4 kB
mat4_albedo.texture.txt	34 B
mat4_normal.texture.txt	77 B
loco_brake.trainzmesh	21.2 kB
knob7.trainzmesh	33.7 kB
knob6.trainzmesh	32.9 kB
mat3_parameter.texture.txt	63 B
knob4.trainzmesh	33.6 kB
mat5_albedo.texture.txt	34 B
knob3.trainzmesh	30.6 kB
knob4.fbx	36.3 kB
knob5.trainzmesh	32.9 kB
knob1.fbx	36.1 kB
knob2.trainzmesh	193.8 kB
mat4_parameter.texture.txt	63 B
mat5_parameter.texture.txt	63 B
mat5_normal.texture.txt	77 B
mat1_normal.png	1.1 MB
knob3.fbx	37.7 kB
840_cab.trainzmesh	2.4 MB
knob2.fbx	189.3 kB
injector.fbx	298.0 kB
mat6_albedo.texture.txt	34 B
mat6_normal.texture.txt	77 B
mat6_parameter.texture.txt	63 B
mat6_normal.png	661.9 kB
injector_scene.kin	9.0 kB
knob1.trainzmesh	34.7 kB
gauges1_param.png	27.9 kB
handle2.fbx	30.0 kB
mat7_normal.texture.txt	100 B
injector.trainzmesh	432.7 kB
mat7_albedo.texture.txt	34 B
gauges1_param.texture.txt	61 B
front_window_right_scene.kin	3.4 kB
mat7_parameter.texture.txt	63 B
needle1.trainzmesh	3.5 kB
needle2.trainzmesh	3.5 kB
regulator-collision-box.trainzmesh	1.6 kB
gauges1_normal.png	78 B
front_window_left_scene.kin	3.4 kB
needle2.fbx	22.0 kB
needle1.fbx	21.9 kB
knob5.fbx	38.7 kB
gauges1_normal.texture.txt	80 B
reverser-collision-box.trainzmesh	1.6 kB
reverser_scene.kin	6.6 kB
handle2.trainzmesh	18.9 kB
knob6.fbx	38.9 kB
knob7.fbx	35.6 kB
gauges1_albedo.texture.txt	37 B
front_window_left.fbx	41.2 kB
regulator.fbx	121.2 kB
roof_cover_left.trainzmesh	3.8 kB
loose-coal.fbx	162.1 kB
regulator.trainzmesh	191.6 kB
firedoor_collision_box.trainzmesh	1.6 kB
roof_cover_left.fbx	24.5 kB
firedoor_collision_box.fbx	19.8 kB
roof_cover_right_scene.kin	3.4 kB
reverser.fbx	83.4 kB
roof_cover_right.trainzmesh	3.8 kB
side_window_left_scene.kin	3.4 kB
side_window_right_scene.kin	3.4 kB
sander-handle_scene.kin	3.4 kB
side_window_left.trainzmesh	15.5 kB
reverser.trainzmesh	120.1 kB
sander-handle.fbx	35.9 kB
sander-handle.trainzmesh	29.6 kB
roof_cover_right.fbx	24.7 kB
side_window_left.fbx	40.5 kB
reverser-collision-box.fbx	19.8 kB
firebox_door.fbx	53.9 kB
mat3_normal.png	1.9 MB
regulator-collision-box.fbx	19.8 kB
roof_cover_left_scene.kin	3.4 kB
side_window_right.trainzmesh	16.4 kB
front_window_right.trainzmesh	14.0 kB
gauges1_albedo.png	101.4 kB
sight-glass-handle.fbx	31.0 kB
mat2_parameter.png	2.1 MB
regulator_scene.kin	9.0 kB
sight-glass-handle.trainzmesh	17.8 kB
front_window_left.trainzmesh	14.0 kB
front_window_right.fbx	41.2 kB
sound
sound / air_brake.wav	108.6 kB
sound / cabin.txt	655 B
sound / coal_into_firebox1.wav	64.7 kB
sound / boiler_blow_down.wav	79.7 kB
sound / boiler_blow_down_end.wav	48.9 kB
sound / air_brake2.wav	87.0 kB
sound / coal_into_firebox3.wav	41.7 kB
sound / coal_into_firebox2.wav	51.9 kB
sound / bell.wav	466.2 kB
sound / firebox_open.wav	16.3 kB
sound / cylinder_cocks_full.wav	84.7 kB
sound / whistle_end.wav	29.5 kB
sound / whistle_mid_loop.wav	37.3 kB
sound / reversing_lever_throw.wav	28.2 kB
sound / whistle_start.wav	26.1 kB
sound / sanding_lever2.wav	72.6 kB
sound / cylinder_cocks2.wav	35.9 kB
sound / regulator1.wav	53.1 kB
sound / horn.wav	68.0 kB
sound / tender_handbrake.wav	207.7 kB
sound / cylinder_cocks1.wav	41.8 kB
sound / sanding_lever1.wav	72.3 kB
sound / reversing_lever_notch.wav	40.5 kB
sound / regulator2.wav	43.7 kB
sound / firebox_close.wav	23.6 kB
sound / fire_roar.wav	72.6 kB
water_level.trainzmesh	2.2 kB
firebox_door.trainzmesh	71.2 kB
water_level.fbx	38.9 kB
cylinder_cocks_lever.trainzmesh	5.5 kB
whistle-collision-box.fbx	14.3 kB
whistle-cord.trainzmesh	104.0 kB
whistle-collision-box.trainzmesh	1.2 kB
coal-hatch_scene.kin	8.1 kB
whistle-cord_scene.kin	18.5 kB
windows_normal.png	77.8 kB
windows_albedo.texture.txt	63 B
windows_albedo.png	9.0 kB
whistle-cord.fbx	118.4 kB
cylinder_cocks_lever.fbx	22.7 kB
watertank_lid.fbx	28.4 kB
windows_param.texture.txt	61 B
windows_param.png	31.8 kB
windows_normal.texture.txt	80 B
coal-load_scene.kin	3.4 kB
train_brake.fbx	34.2 kB
coal-load.fbx	57.4 kB
water_level_scene.kin	8.1 kB
train_brake.trainzmesh	20.3 kB
cnj840_cab.gs	8.4 kB
coal1024.texture.txt	31 B
cab_door_right.fbx	37.3 kB
mat2_normal.png	1.5 MB
coal1024-param.texture.txt	63 B
coal1024-normal.texture.txt	81 B
coal-hatch.trainzmesh	18.0 kB
coal-load.trainzmesh	62.4 kB
840_cab.fbx	2.1 MB
coal-hatch.fbx	35.4 kB
watertank_lid.trainzmesh	13.3 kB
side_window_right.fbx	41.4 kB
mat1_parameter.png	2.5 MB
mat6_albedo.png	2.4 MB
mat4_albedo.png	2.5 MB
coal1024-normal.png	2.5 MB
coal1024.png	2.3 MB
mat3_albedo.png	2.9 MB
coal1024-param.png	2.3 MB
mat4_normal.png	3.5 MB
mat3_parameter.png	5.5 MB
mat5_parameter.png	5.0 MB
mat6_parameter.png	5.0 MB
mat7_normal.png	5.0 MB
mat2_albedo.png	4.4 MB
mat5_normal.png	4.5 MB
mat5_albedo.png	4.0 MB
mat4_parameter.png	5.7 MB
mat7_parameter.png	5.8 MB
mat7_albedo.png	7.5 MB
Общий объём файлов:	93.7 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:186372:110114>	interior	CNJ 840 loco cab interior	4.8	4.11.2021 11:53:18	89.3 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:186372:110113>	#186372	traincar	CNJ 840 Loco	4.8	4.11.2021 11:40:06	39.9 MB