<kuid:166065:111900> EMTS RhB Ge 6/6-1 Interior

Тип: Кабина
Опубликовано: 2.09.2025 1:26:33
Скачиваний: 15
Размер: 6.5 MB

Скачать

Interior for Crocodile locos GE-441-82, GE 6/6 I.
Updated by euromodeller to eliminate warnings and bugs in CM.

config.txt:

username                                "EMTS RhB Ge 6/6-1 Interior"
kind                                    "interior"
trainz-build                            4.6
script                                  "re450cab"
class                                   "Re450Cabin"
interior-controls-type                  "full"
mesh-table-lod-transition-distances     
mesh-table
{
  default
  {
    mesh                                "interior.im"
    auto-create                         1
  }
  speedo_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speedndl.im"
    att                                 "a.speed"
    limits                              0,46
    angles                              0,4.5
    att-parent                          "default"
  }
  ampmeter_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "voltndl.im"
    att                                 "a.amp"
    limits                              0,50
    angles                              0,1.5
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "voltndl.im"
    att                                 "a.volt"
    limits                              0,50
    angles                              0,1.5
    att-parent                          "default"
  }
  light_switch
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "button.im"
    att                                 "a.light"
    limits                              0,1
    angles                              0,-0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.2
    att-parent                          "default"
  }
  switch1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "button.im"
    att                                 "a.switch1"
    limits                              0,1
    angles                              0,-0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.2
    att-parent                          "default"
  }
  switch2
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "button.im"
    att                                 "a.switch2"
    limits                              0,1
    angles                              0,-0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.2
    att-parent                          "default"
  }
  switch3
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "button.im"
    att                                 "a.switch3"
    limits                              0,1
    angles                              0,0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.2
    att-parent                          "default"
  }
  pantograph_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "greep.im"
    att                                 "a.pant"
    limits                              0,1
    angles                              0,-0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.2
    att-parent                          "default"
  }
  wiper_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "wiperlever.im"
    att                                 "a.wiperw"
    limits                              0,1
    angles                              0,-0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.2
    att-parent                          "default"
  }
  horn
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "greep.im"
    att                                 "a.horn"
    limits                              0,1
    angles                              0,-0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.2
    att-parent                          "default"
  }
  greep_a
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "greep.im"
    att                                 "a.greep1"
    limits                              0,1
    angles                              0,-0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.2
    att-parent                          "default"
  }
  greep_b
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "greep.im"
    att                                 "a.greep2"
    limits                              0,1
    angles                              0,-0.5
    notches                             0,1
    notchheight                         0,0
    radius                              0.2
    att-parent                          "default"
  }
  reverser_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "reverser.im"
    att                                 "a.reverser"
    limits                              0,2
    angles                              -0.5,0.5
    notches                             0,0.5,1
    notchheight                         1,2,1
    radius                              0.2
    att-parent                          "default"
  }
  trainbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "brake1.im"
    att                                 "a.brake1"
    limits                              0,5
    angles                              0,1
    notches                             0,0.2,0.4,0.6,0.8,1
    notchheight                         1,2,2,2,2,1
    radius                              0.2
    att-parent                          "default"
  }
  dynamicbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "brake2.im"
    att                                 "a.brake2"
    limits                              0,2
    angles                              0,1.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.2
    att-parent                          "default"
  }
  zandrem_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "zandrem.im"
    att                                 "a.zandrem"
    limits                              0,2
    angles                              0,1.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.2
    att-parent                          "default"
  }
  throttle_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "throttle.im"
    att                                 "a.throttle"
    limits                              0,24
    angles                              0,10
    notches                             0,0.042,0.083,0.125,0.167,0.208,0.25,0.292,0.333,0.375,0.417,0.458,0.5,0.542,0.583,0.625,0.667,0.708,0.75,0.792,0.833,0.875,0.917,0.958,1
    notchheight                         1,2,2,2,2,2,1,2,2,2,2,2,1,2,2,2,2,2,1,2,2,2,2,2,1
    radius                              0.2
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "brakendl.im"
    att                                 "a.brakendl1"
    limits                              0,1000
    angles                              0,4
    att-parent                          "default"
  }
  bplocomain_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "brakendl.im"
    att                                 "a.brakendl2"
    limits                              0,1000
    angles                              0,-1.5
    att-parent                          "default"
  }
  wipers_a
  {
    mesh                                "wiper/wiper.im"
    auto-create                         1
    anim                                "wiper/wiper.kin"
    att                                 "a.wiper"
    att-parent                          "default"
  }
}
cameradefault                           0
cameralist
{
  camera1                               0.265,0.66,0.594,0,0
  camera0                               -0.613,0.793,0.594,0,0
}
category-era                            "1900s"
category-region                         "CH"
category-class                          "ZI"
description                             "Interior for Crocodile locos GE-441-82, GE 6/6 I.
Updated by euromodeller to eliminate warnings and bugs in CM."
author                                  "witte46, modified and updated by euromodeller"
license                                 "Original by witte 46--- This product must be free of charge. Also other sites get my permission to offer this product for download on their site, if the download is free of charge. You are free to copy/edit/cut/paste/move/change/reskin/repaint this product,
if you just name witte46 as the original author.
You do not have to inform me personally.
I can not be held responsable for any damage that could be
done by this product. That is very unlikely however."
thumbnails
{
  0
  {
    image                               "image.jpg"
    width                               480
    height                              360
  }
}
kuid                                    <kuid:166065:111900>
kuid-table
{
}

Файлы:

4008.texture.txt	27 B
5660524-mano_cfa2.texture.txt	40 B
black.texture.txt	28 B
wiper
wiper / black.texture.txt	28 B
wiper / black.tga	48.0 kB
wiper / chrome3.texture.txt	30 B
wiper / chrome3.bmp	48.1 kB
wiper / env_metal.texture.txt	32 B
wiper / wielroest.texture.txt	32 B
wiper / wiper.evt	88 B
wiper / wiper.im	6.3 kB
wiper / wiper.kin	6.2 kB
wiper / wielroest.tga	192.0 kB
wiper / env_metal.bmp	48.1 kB
brakendl.im	2.5 kB
black.tga	48.0 kB
chrome.texture.txt	29 B
button.im	6.9 kB
concrete.cast-in-place.formwork.wood.1.bump.texture.txt	66 B
brake1.im	26.0 kB
brake2.im	54.8 kB
deurklink-deurklink-mask.texture.txt	80 B
chrome.tga	48.0 kB
env_glass.texture.txt	32 B
deurklink.tga	64.0 kB
env_glass.bmp	48.1 kB
env_metal.texture.txt	32 B
greep.im	9.4 kB
grey_concrete_off.texture.txt	40 B
grism6.texture.txt	29 B
grism6.tga	16.5 kB
grey_concrete_off.tga	256.5 kB
knop2.texture.txt	28 B
image.jpg	58.8 kB
koper.texture.txt	28 B
knop2.tga	48.0 kB
koper.tga	48.0 kB
pano_0.texture.txt	29 B
re450cab.gs	3.4 kB
roodl.texture.txt	28 B
roodl.tga	48.0 kB
reverser.im	24.8 kB
rubber.texture.txt	29 B
speedndl.im	1.5 kB
tabel2.texture.txt	29 B
tabel2.tga	48.0 kB
env_metal.bmp	48.1 kB
tachymetre200-wit.texture.txt	40 B
rubber.tga	48.5 kB
voltndl.im	1.5 kB
window2.texture.txt	30 B
window2.tga	16.5 kB
throttle.im	122.8 kB
wiperlever.im	13.1 kB
woods & plastics.finish carpentry.wood.boards.texture.txt	68 B
zandrem.im	29.7 kB
zetelstof.texture.txt	32 B
zetelstof.tga	48.0 kB
4010.texture.txt	27 B
interior.im	1.4 MB
concrete.cast-in-place.formwork.wood.1.bump.tga	1.0 MB
5660524-mano_cfa2.tga	256.5 kB
pano_0.tga	2.0 MB
tachymetre200-wit.tga	192.0 kB
4008.tga	1.0 MB
4010.tga	2.0 MB
woods & plastics.finish carpentry.wood.boards.tga	4.0 MB
Общий объём файлов:	13.3 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:166065:111900>	interior	EMTS RhB Ge 6/6-1 Interior	4.6	2.09.2025 1:26:33	6.5 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:166065:111883>	#166065	traincar	EMTS RhB Ge 6/6-1 1000mm Crocodile Main Body B	4.6	12.09.2025 23:52:07	13.0 MB
<kuid:166065:118636>	#166065	traincar	EMTS RhB Ge 6/6-1 1000mm Crocodile Main B, Glacier Express Blue	4.6	12.09.2025 23:43:43	12.7 MB
<kuid:166065:118667>	#166065	traincar	EMTS RhB Ge 6/6-1 1000mm Crocodile Main B, LGB Green	4.6	12.09.2025 23:47:01	12.2 MB
<kuid2:942578:102234:2>	#942578	traincar	BCP RhB Ge 6/6 I 407 B	4.6	3.09.2025 1:21:39	75.3 MB
<kuid:942578:102411>	#942578	traincar	BCP RhB Ge 6/6 I 414 B	4.6	2.09.2025 1:25:46	47.1 MB