<kuid2:96914:55022:3> NG Side Tank Cab Weathered

Тип: Кабина
Опубликовано: 22.04.2025 19:44:58
Скачиваний: 59
Размер: 1.5 MB

Скачать

Generic side tank engine cab suitable for narrow gauge or very small standard gauge locomotives. This model is a side-entry design based on an ALCO prototype.

config.txt:

kuid                                    <kuid2:96914:55022:3>
category-class                          "ZI"
category-region                         "US;CA;MX"
category-era                            "1900s;1910s;1920s;1930s"
script                                  "pb15cabin"
class                                   "PB15Cabin"
cameralist
{
  camera0                               -0.804,0.388,1.1,0,0
  camera1                               -0.804,0.388,1.1,0.673,-0.195
  camera2                               -0.804,0.388,1.1,3,0
}
cameradefault                           0
enable-shadows-in-cab                   1
outside-visible-from-cabin              0
cabin-visible-from-outside              0
interior-controls-type                  "full"
mesh-table-lod-transition-distances     
mesh-table
{
  default
  {
    mesh                                "magmacabin.im"
    auto-create                         1
    effects
    {
      shell
      {
        kind                            "attachment"
        att                             "a.origin"
        default-mesh                    <kuid2:96914:990722:1>
      }
    }
  }
  trainbrakelap_lever
  {
    mesh                                "trainbrake.im"
    auto-create                         1
    att                                 "a.trainbrake"
    limits                              0,4
    angles                              0,1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,1,1,1,1
    radius                              0.2
    att-parent                          "default"
    kind                                "lever"
  }
  independantbrake_lever
  {
    mesh                                "indbrake.im"
    auto-create                         1
    att                                 "a.indbrake"
    limits                              0,32
    angles                              0,1
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         1,0,0,0,0,1,0,0,0,0,1
    radius                              0.15
    att-parent                          "default"
    kind                                "lever"
  }
  regulator
  {
    mesh                                "regulator.im"
    anim                                "regulator.kin"
    auto-create                         1
    att                                 "a.regulator"
    limits                              0,1
    att-parent                          "default"
    kind                                "animated-lever"
    test-collisions                     0
    mousespeed                          -1
  }
  regulator-collision-box
  {
    mesh                                "hitbox.im"
    att-parent                          "regulator"
    att                                 "a.handle"
    auto-create                         1
    kind                                "collision-proxy"
    opacity                             0
    collision-parent                    "regulator"
  }
  whistle_lever
  {
    mesh                                "whistle.im"
    anim                                "whistle.kin"
    auto-create                         1
    att                                 "a.origin"
    att-parent                          "default"
    kind                                "animated-lever"
    limits                              0,1
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    test-collisions                     0
  }
  whistle_lever-collision-box
  {
    mesh                                "hitbox.im"
    att-parent                          "whistle_lever"
    att                                 "a.cord"
    auto-create                         1
    kind                                "collision-proxy"
    opacity                             0
    collision-parent                    "whistle_lever"
  }
  boiler_needle
  {
    kind                                "needle"
    mesh                                "boilerneedle.im"
    att                                 "a.boilerpsi"
    limits                              0,1860
    auto-create                         1
    orientation                         1.5708,0,0
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "brakeneedle_red.im"
    auto-create                         1
    att                                 "a.brakepsi"
    att-parent                          "default"
    limits                              0,1275
    orientation                         1.5708,0,0
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "brakeneedle_black.im"
    auto-create                         1
    att                                 "a.brakepsi1"
    att-parent                          "default"
    limits                              0,1250
    orientation                         1.5708,0,0
  }
  reverser
  {
    kind                                "lever"
    mesh                                "reverser.im"
    auto-create                         1
    att                                 "a.reverser"
    att-parent                          "default"
    angles                              0.3,-0.3
    limits                              -1,1
  }
  waterglass_left
  {
    mesh                                "water.im"
    anim                                "water.kin"
    att                                 "a.water"
    att-parent                          "default"
    auto-create                         1
    limits                              0,100
    kind                                "animated-dial"
  }
  water_injector_0
  {
    mesh                                "injector.im"
    anim                                "injector.kin"
    auto-create                         1
    att                                 "a.injector2"
    att-parent                          "default"
    kind                                "animated-lever"
    mousemode                           "exact"
  }
  water_injector_0-collision-box
  {
    mesh                                "hitbox.im"
    att-parent                          "water_injector_0"
    att                                 "a.grip"
    auto-create                         1
    kind                                "collision-proxy"
    opacity                             0
    collision-parent                    "water_injector_0"
  }
  water_injector_1
  {
    mesh                                "injector.im"
    anim                                "injector.kin"
    auto-create                         1
    att                                 "a.injector1"
    att-parent                          "default"
    kind                                "animated-lever"
    mousemode                           "exact"
    orientation                         1.5708,0,0
  }
  water_injector_1-collision-box
  {
    mesh                                "hitbox.im"
    att-parent                          "water_injector_1"
    att                                 "a.grip"
    auto-create                         1
    kind                                "collision-proxy"
    opacity                             0
    collision-parent                    "water_injector_1"
  }
  fire_plates
  {
    mesh                                "fireboxdoor.im"
    att                                 "a.fireboxdoor"
    att-parent                          "default"
    auto-create                         1
    kind                                "lever"
    test-collisions                     1
    limits                              0,1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,1,1,1,1
    angles                              0,-1.2
  }
  blower_lever
  {
    mesh                                "knob.im"
    att                                 "a.blower"
    att-parent                          "default"
    auto-create                         1
    kind                                "lever"
    test-collisions                     1
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    angles                              0,1
  }
  sanding_lever
  {
    kind                                "lever"
    mesh                                "sander.im"
    auto-create                         1
    limits                              0,1
    notches                             0,1
    notchheight                         1,1
    angles                              0,0.35
    radius                              0.2
    att                                 "a.sandvalve"
    att-parent                          "default"
    mousespeed                          -1
  }
  light_switch
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "lightswitch.im"
    att                                 "a.light"
    limits                              0,1
    angles                              0,-0.5
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.05
    att-parent                          "default"
  }
  switch_1
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "lightswitch.im"
    att                                 "a.light2"
    limits                              0,1
    angles                              0,0.5
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.05
    att-parent                          "default"
  }
  firebox
  {
    mesh                                "firestuffs/firebox.im"
    auto-create                         1
    kind                                "firebox"
    test-collisions                     0
  }
  fire
  {
    mesh                                "firestuffs/coalfire.im"
    anim                                "firestuffs/coalfire.kin"
    auto-create                         1
    test-collisions                     0
    animation-loop-speed                1.5
  }
  coal
  {
    mesh                                "firestuffs/coal.im"
    auto-create                         1
    test-collisions                     0
  }
}
obsolete-table
{
}
description                             "Generic side tank engine cab suitable for narrow gauge or very small standard gauge locomotives. This model is a side-entry design based on an ALCO prototype."
trainz-build                            4.6
username                                "NG Side Tank Cab Weathered"
kind                                    "interior"
license                                 "The enclosed meshes may be incorporated in your content by mesh-table/config reference only: you may not copy any of the meshes or textures and include them in your content. The enclosed textures and meshes may not be reskinned. If you need a different color – contact me. You are not permitted to decompile or reverse-engineer the included meshes. The enclosed assets shall not be sold as a compilation or used (either directly or by reference) in any payware content without my written permission. You shall not clone and reupload this content. You also shall not redistribute the original asset without my prior written permission. If you wish to update the original assets to a higher trainz-build number for public release, contact me before work begins. You may not downgrade this content to a lower trainz-build number. Lack of written response for any request is to be interpreted as a refusal to grant permission. The included content is copyright 2022 by Ben Neal. Any rights not specifically granted to you above are retained by the original author."
contact-email                           "bdaneal@yahoo.com"
author                                  "Ben Neal"
thumbnails
{
  0
  {
    width                               240
    height                              180
    image                               "thumbnail.jpg"
  }
}
kuid-table
{
  0                                     <kuid2:96914:990722:1>
}

Файлы:

firestuffs
firestuffs / coalfire.im	2.1 kB
firestuffs / coalfire.texture.txt	31 B
firestuffs / coalfire.kin	5.0 kB
firestuffs / firebox_glow-firebox_glow_op.texture.txt	62 B
firestuffs / fireglow.im	580 B
firestuffs / firebox.im	1.2 kB
firestuffs / coal.im	3.1 kB
firestuffs / flame_test2.texture.txt	57 B
firestuffs / coalfire.tga	12.0 kB
firestuffs / vtfirebox.texture.txt	32 B
firestuffs / firebox_glow_op.bmp	12.1 kB
firestuffs / firebox_glow.tga	12.0 kB
firestuffs / flame_test2.tga	128.0 kB
firestuffs / vtfirebox.tga	768.0 kB
sound
sound / cabin.txt	1.0 kB
sound / coal_shovel2.wav	64.2 kB
sound / coal_into_firebox1.wav	64.7 kB
sound / boiler_blow_down.wav	79.7 kB
sound / firebox_close.wav	23.6 kB
sound / air_brake.wav	108.6 kB
sound / coal_shovel_into_combined.wav	97.4 kB
sound / horn_end.wav	7.0 kB
sound / firebox_open.wav	16.3 kB
sound / horn_start.wav	42.9 kB
sound / reversing_lever_notch.wav	40.5 kB
sound / whistle_mid_loop.wav	43.6 kB
sound / regulator2.wav	43.7 kB
sound / horn_loop.wav	43.6 kB
sound / fire_roar.wav	72.6 kB
sound / window_open.wav	55.9 kB
boilerneedle.im	2.8 kB
brakeneedle_black.im	1.8 kB
cab1a.texture.txt	29 B
fireboxdoor.im	7.7 kB
brakeneedle_red.im	1.8 kB
hitbox.im	1.2 kB
indbrake.im	5.4 kB
injector.kin	2.2 kB
lightswitch.im	1.3 kB
knob.im	2.0 kB
pb15cabin.gs	172 B
magmacabin.im	1.5 kB
regulator.kin	2.2 kB
reverser.im	8.6 kB
injector.im	27.7 kB
sander.im	3.9 kB
regulator.im	17.8 kB
thumbnail.jpg	11.4 kB
trainbrake.im	7.3 kB
vtcab2.texture.txt	29 B
whistle.kin	1.3 kB
whistle.im	3.4 kB
water.im	4.7 kB
water.kin	5.8 kB
vtcab2.tga	1.0 MB
Общий объём файлов:	2.8 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:96914:55022:3>	interior	NG Side Tank Cab Weathered	4.6	22.04.2025 19:44:58	1.5 MB
<kuid2:96914:55022:2>	interior	clearlake12cab	2	13.06.2020 19:16:02	1.6 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid2:96914:990722:1>	#96914	mesh	NG Side Tank Cab Shell Weathered	4.6	9.10.2025 3:15:14	8.0 MB
Всего связей: 1, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:96914:800:3>	#96914	traincar	36ng Murchison 8	2	14.06.2020 12:23:45	1.2 MB
<kuid2:96914:800:4>	#96914	traincar	36ng Murchison 8 Classic	4.6	22.04.2025 19:44:46	3.6 MB
<kuid2:96914:1200:3>	#96914	traincar	36ng Clearlake 12	2	14.06.2020 12:23:41	1.6 MB
<kuid2:96914:1200:4>	#96914	traincar	36ng Clearlake 12 Classic	4.6	22.04.2025 19:46:28	3.7 MB