<kuid2:96775:55157:1> Lint 41 Interior

Тип: Кабина
Опубликовано: 27.09.2025 6:51:24
Скачиваний: 6
Размер: 2.7 MB
Скачать

Cab for Lint 41
config.txt:
username                                "Lint 41 Interior"
kuid                                    <kuid2:96775:55157:1>
kind                                    "interior"
category-class                          "ZI"
author                                  "baha, update JaRa"
category-region                         "DK"
category-era                            "2000s;2010s;2020s"
interior-controls-type                  "full"
cameradefault                           0
enable-shadows-in-cab                   0
trainz-build                            3.7
license                                 "Freeware"
description                             "Cab for Lint 41"
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
cameralist
{
  camera0                               -0.2,0.3,0.5,0,-0.3
}
mesh-table
{
  default
  {
    mesh                                "Lint_Interior.im"
    auto-create                         1
  }
  tacho_instrument
  {
    mesh                                "Tacho.im"
    auto-create                         1
    att                                 "a.tachonadel"
    att-parent                          "default"
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "Tachonadel.im"
    auto-create                         1
    att                                 "a.tachonadel"
    limits                              0,43.900002
  }
  speicherdruck_instrument
  {
    mesh                                "Speicherdruck.im"
    auto-create                         1
    att                                 "a.speicherdruck"
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "Drucknadel_gelb.im"
    auto-create                         1
    att                                 "a.speicherdruck"
    limits                              300,1000
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "Drucknadel_rot.im"
    auto-create                         1
    att                                 "a.speicherdruck"
    limits                              200,1200
  }
  bremsdruck_instrument
  {
    mesh                                "Speicherdruck.im"
    auto-create                         1
    att                                 "a.bremsdruck"
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "Drucknadel_rot_weiss.im"
    att                                 "a.bremsdruck"
    limits                              0,600
    att-parent                          "default"
  }
  gashebelkonsole
  {
    mesh                                "Gaskonsole.im"
    auto-create                         1
    att                                 "a.gashebel"
    att-parent                          "default"
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "Gashebel.im"
    auto-create                         1
    att                                 "a.gashebel"
    limits                              0,8
    angles                              0,-0.78
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              -0.1
    mousespeed                          0.5
  }
  bremshebelkonsole
  {
    mesh                                "Bremshebelkonsole.im"
    auto-create                         1
    att                                 "a.bremshebel"
    att-parent                          "default"
  }
  trainbrake_lever
  {
    kind                                "lever"
    mesh                                "Bremshebel.im"
    auto-create                         1
    att                                 "a.bremshebel"
    angles                              0.78,-0.78
    limits                              0,4
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    radius                              -0.1
    mousespeed                          -1
  }
  kippschalterkonsole_fahrtrichtung
  {
    mesh                                "Kippschalterkonsole.im"
    auto-create                         1
    att                                 "a.fahrrichtung"
    att-parent                          "default"
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "Kippschalter_1.im"
    auto-create                         1
    att                                 "a.fahrrichtung"
    limits                              0,2
    angles                              -1,1
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              -0.1
  }
  kippschalterkonsole_1
  {
    mesh                                "Kippschalterkonsole.im"
    auto-create                         1
    att                                 "a.kippschalter01"
    att-parent                          "default"
  }
  kippschalter1
  {
    kind                                "lever"
    mesh                                "Kippschalter_1.im"
    auto-create                         1
    att                                 "a.kippschalter01"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0.1,0.1
    mousespeed                          4
    radius                              -0.1
  }
  kippschalterkonsole_2
  {
    mesh                                "Kippschalterkonsole.im"
    auto-create                         1
    att                                 "a.kippschalter02"
    att-parent                          "default"
  }
  kippschalter2
  {
    kind                                "lever"
    mesh                                "Kippschalter_1.im"
    auto-create                         1
    att                                 "a.kippschalter02"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0.1,0.1
    mousespeed                          4
    radius                              -0.1
  }
  kippschalterkonsole_3
  {
    mesh                                "Kippschalterkonsole.im"
    auto-create                         1
    att                                 "a.kippschalter03"
    att-parent                          "default"
  }
  kippschalter3
  {
    kind                                "lever"
    mesh                                "Kippschalter_2.im"
    auto-create                         1
    att                                 "a.kippschalter03"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0.1,0.1
    mousespeed                          4
    radius                              -0.1
  }
  kippschalterkonsole_4
  {
    mesh                                "Kippschalterkonsole.im"
    auto-create                         1
    att                                 "a.kippschalter04"
    att-parent                          "default"
  }
  kippschalter4
  {
    kind                                "lever"
    mesh                                "Kippschalter_1.im"
    auto-create                         1
    att                                 "a.kippschalter04"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0.1,0.1
    mousespeed                          4
    radius                              -0.1
  }
  kippschalterkonsole_5
  {
    mesh                                "Kippschalterkonsole.im"
    auto-create                         1
    att                                 "a.kippschalter05"
    att-parent                          "default"
  }
  kippschalter5
  {
    kind                                "lever"
    mesh                                "Kippschalter_1.im"
    auto-create                         1
    att                                 "a.kippschalter05"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0.1,0.1
    mousespeed                          4
    radius                              -0.1
  }
  kippschalterkonsole_6
  {
    mesh                                "Kippschalterkonsole.im"
    auto-create                         1
    att                                 "a.kippschalter06"
    att-parent                          "default"
  }
  kippschalter6
  {
    kind                                "lever"
    mesh                                "Kippschalter_1.im"
    auto-create                         1
    att                                 "a.kippschalter06"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0.1,0.1
    mousespeed                          4
    radius                              -0.1
  }
  kippschalterkonsole_7
  {
    mesh                                "Kippschalterkonsole.im"
    auto-create                         1
    att                                 "a.kippschalter07"
    att-parent                          "default"
  }
  kippschalter7
  {
    kind                                "lever"
    mesh                                "Kippschalter_1.im"
    auto-create                         1
    att                                 "a.kippschalter07"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0.1,0.1
    mousespeed                          4
    radius                              -0.1
  }
  kippschalterkonsole_8
  {
    mesh                                "Kippschalterkonsole.im"
    auto-create                         1
    att                                 "a.kippschalter08"
    att-parent                          "default"
  }
  kippschalter8
  {
    kind                                "lever"
    mesh                                "Kippschalter_1.im"
    auto-create                         1
    att                                 "a.kippschalter08"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0.1,0.1
    mousespeed                          4
    radius                              -0.1
  }
  kippschalterkonsole_9
  {
    mesh                                "Kippschalterkonsole.im"
    auto-create                         1
    att                                 "a.kippschalter09"
    att-parent                          "default"
  }
  kippschalter9
  {
    kind                                "lever"
    mesh                                "Kippschalter_1.im"
    auto-create                         1
    att                                 "a.kippschalter09"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0.1,0.1
    mousespeed                          4
    radius                              -0.1
  }
  kippschalterkonsole_10
  {
    mesh                                "Kippschalterkonsole.im"
    auto-create                         1
    att                                 "a.kippschalter10"
    att-parent                          "default"
  }
  kippschalter10
  {
    kind                                "lever"
    mesh                                "Kippschalter_1.im"
    auto-create                         1
    att                                 "a.kippschalter10"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0.1,0.1
    mousespeed                          4
    radius                              -0.1
  }
  horn_11
  {
    mesh                                "Kippschalterkonsole.im"
    auto-create                         1
    att                                 "a.kippschalter11"
    att-parent                          "default"
  }
  horn
  {
    kind                                "lever"
    mesh                                "Kippschalter_2.im"
    auto-create                         1
    att                                 "a.kippschalter11"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0.1,0.1
    mousespeed                          4
    radius                              -0.1
  }
  kippschalterkonsole_12
  {
    mesh                                "Kippschalterkonsole.im"
    auto-create                         1
    att                                 "a.kippschalter12"
    att-parent                          "default"
  }
  kippschalter12
  {
    kind                                "lever"
    mesh                                "Kippschalter_1.im"
    auto-create                         1
    att                                 "a.kippschalter12"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              -0.1
  }
  kippschalterkonsole_13
  {
    mesh                                "Kippschalterkonsole.im"
    auto-create                         1
    att                                 "a.kippschalter13"
    att-parent                          "default"
  }
  kippschalter13
  {
    kind                                "lever"
    mesh                                "Kippschalter_1.im"
    auto-create                         1
    att                                 "a.kippschalter13"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0.1,0.1
    mousespeed                          4
    radius                              -0.1
  }
  kippschalterkonsole_14
  {
    mesh                                "Kippschalterkonsole.im"
    auto-create                         1
    att                                 "a.kippschalter14"
    att-parent                          "default"
  }
  kippschalter14
  {
    kind                                "lever"
    mesh                                "Kippschalter_1.im"
    auto-create                         1
    att                                 "a.kippschalter14"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         0.1,0.1
    mousespeed                          4
    radius                              -0.1
  }
  drehschalter_gross01
  {
    kind                                "lever"
    mesh                                "drehschalter_gross.im"
    auto-create                         1
    att                                 "a.drehschalter_gross"
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
  }
  tuerfreigabe_01
  {
    mesh                                "Drehschalterkonsole.im"
    auto-create                         1
    att                                 "a.drehschalter01"
    att-parent                          "default"
  }
  tuerfreigabe
  {
    kind                                "lever"
    mesh                                "Drehschalter.im"
    auto-create                         1
    att                                 "a.drehschalter01"
    limits                              0,1
    angles                              0,1.75
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
  }
  drehschalter_02
  {
    mesh                                "Drehschalterkonsole.im"
    auto-create                         1
    att                                 "a.drehschalter02"
    att-parent                          "default"
  }
  light_switch
  {
    kind                                "lever"
    mesh                                "Drehschalter.im"
    auto-create                         1
    att                                 "a.drehschalter02"
    limits                              0,1
    angles                              0,1.75
    notches                             0,1
    notchheight                         2,2
    radius                              0.1
  }
  drehschalter_02a
  {
    mesh                                "Drehschalterkonsole.im"
    auto-create                         1
    att                                 "a.drehschalter02a"
    att-parent                          "default"
  }
  drehschalter02a
  {
    kind                                "lever"
    mesh                                "Drehschalter.im"
    auto-create                         1
    att                                 "a.drehschalter02a"
    limits                              -2,2
    angles                              -1.57,1.75
    notches                             0,0.25,0.5,0.75,1
    notchheight                         2,2,1,2,2
    radius                              0.1
  }
  drehschalter_03
  {
    mesh                                "Drehschalterkonsole.im"
    auto-create                         1
    att                                 "a.drehschalter03"
    att-parent                          "default"
  }
  drehschalter03
  {
    kind                                "lever"
    mesh                                "Drehschalter.im"
    auto-create                         1
    att                                 "a.drehschalter03"
    limits                              -2,2
    angles                              -1.57,1.75
    notches                             0,0.25,0.5,0.75,1
    notchheight                         2,2,1,2,2
    radius                              0.1
  }
  drehschalter_04
  {
    mesh                                "Drehschalterkonsole.im"
    auto-create                         1
    att                                 "a.drehschalter04"
    att-parent                          "default"
  }
  drehschalter04
  {
    kind                                "lever"
    mesh                                "Drehschalter.im"
    auto-create                         1
    att                                 "a.drehschalter04"
    limits                              -2,2
    angles                              -1.57,1.75
    notches                             0,0.25,0.5,0.75,1
    notchheight                         2,2,1,2,2
    radius                              0.1
  }
  drehschalter_05
  {
    mesh                                "Drehschalterkonsole.im"
    auto-create                         1
    att                                 "a.drehschalter05"
    att-parent                          "default"
  }
  drehschalter05
  {
    kind                                "lever"
    mesh                                "Drehschalter.im"
    auto-create                         1
    att                                 "a.drehschalter05"
    limits                              -2,2
    angles                              -1.57,1.75
    notches                             0,0.25,0.5,0.75,1
    notchheight                         2,2,1,2,2
    radius                              0.1
  }
  drehschalter_06
  {
    mesh                                "Drehschalterkonsole.im"
    auto-create                         1
    att                                 "a.drehschalter06"
    att-parent                          "default"
  }
  drehschalter06
  {
    kind                                "lever"
    mesh                                "Drehschalter.im"
    auto-create                         1
    att                                 "a.drehschalter06"
    limits                              -2,2
    angles                              -1.57,1.75
    notches                             0,0.25,0.5,0.75,1
    notchheight                         2,2,1,2,2
    radius                              0.1
  }
  taster_01
  {
    mesh                                "Drucktasterring.im"
    auto-create                         1
    att                                 "a.taste01"
    att-parent                          "default"
  }
  taster01
  {
    kind                                "pullrope"
    mesh                                "Drucktaster_gelb.im"
    auto-create                         1
    att                                 "a.taste01"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  taster_01a
  {
    mesh                                "Drucktasterring.im"
    auto-create                         1
    att                                 "a.taste01a"
    att-parent                          "default"
  }
  taster01a
  {
    kind                                "pullrope"
    mesh                                "Drucktaster_gruen.im"
    auto-create                         1
    att                                 "a.taste01a"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  taster_02
  {
    mesh                                "Drucktasterring.im"
    auto-create                         1
    att                                 "a.taste02"
    att-parent                          "default"
  }
  taster02
  {
    kind                                "pullrope"
    mesh                                "Drucktaster_schwarz.im"
    auto-create                         1
    att                                 "a.taste02"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  taster_02a
  {
    mesh                                "Drucktasterring.im"
    auto-create                         1
    att                                 "a.taste02a"
    att-parent                          "default"
  }
  taster02a
  {
    kind                                "pullrope"
    mesh                                "Drucktaster_schwarz.im"
    auto-create                         1
    att                                 "a.taste02a"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  taster_03
  {
    mesh                                "Drucktasterring.im"
    auto-create                         1
    att                                 "a.taste03"
    att-parent                          "default"
  }
  taster03
  {
    kind                                "pullrope"
    mesh                                "Drucktaster_rot.im"
    auto-create                         1
    att                                 "a.taste03"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  taster_04
  {
    mesh                                "Drucktasterring.im"
    auto-create                         1
    att                                 "a.taste04"
    att-parent                          "default"
  }
  taster04
  {
    kind                                "pullrope"
    mesh                                "Drucktaster_gruen.im"
    auto-create                         1
    att                                 "a.taste04"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  taster_04a
  {
    mesh                                "Drucktasterring.im"
    auto-create                         1
    att                                 "a.taste04a"
    att-parent                          "default"
  }
  taster04a
  {
    kind                                "pullrope"
    mesh                                "Drucktaster_schwarz.im"
    auto-create                         1
    att                                 "a.taste04a"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  taster_05
  {
    mesh                                "Drucktasterring.im"
    auto-create                         1
    att                                 "a.taste05"
    att-parent                          "default"
  }
  taster05
  {
    kind                                "pullrope"
    mesh                                "Drucktaster_schwarz.im"
    auto-create                         1
    att                                 "a.taste05"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  taster_05a
  {
    mesh                                "Drucktasterring.im"
    auto-create                         1
    att                                 "a.taste05a"
    att-parent                          "default"
  }
  taster05a
  {
    kind                                "pullrope"
    mesh                                "Drucktaster_rot.im"
    auto-create                         1
    att                                 "a.taste05a"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  taster_06
  {
    mesh                                "Drucktasterring.im"
    auto-create                         1
    att                                 "a.taste06"
    att-parent                          "default"
  }
  taster06
  {
    kind                                "pullrope"
    mesh                                "Drucktaster_schwarz.im"
    auto-create                         1
    att                                 "a.taste06"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  taster_06a
  {
    mesh                                "Drucktasterring.im"
    auto-create                         1
    att                                 "a.taste06a"
    att-parent                          "default"
  }
  taster06a
  {
    kind                                "pullrope"
    mesh                                "Drucktaster_rot.im"
    auto-create                         1
    att                                 "a.taste06a"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  taster_07
  {
    mesh                                "Drucktasterring.im"
    auto-create                         1
    att                                 "a.taste07"
    att-parent                          "default"
  }
  taster07
  {
    kind                                "pullrope"
    mesh                                "Drucktaster_weiss.im"
    auto-create                         1
    att                                 "a.taste07"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  taster_08
  {
    mesh                                "Drucktasterring.im"
    auto-create                         1
    att                                 "a.taste08"
    att-parent                          "default"
  }
  taster08
  {
    kind                                "pullrope"
    mesh                                "Drucktaster_weiss.im"
    auto-create                         1
    att                                 "a.taste08"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  taster_09
  {
    mesh                                "Drucktasterring.im"
    auto-create                         1
    att                                 "a.taste09"
    att-parent                          "default"
  }
  taster09
  {
    kind                                "pullrope"
    mesh                                "Drucktaster_weiss.im"
    auto-create                         1
    att                                 "a.taste09"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  lampenfeld_01
  {
    mesh                                "Leuchtenfeld.im"
    auto-create                         1
    att                                 "a.lampenfeld"
    att-parent                          "default"
  }
  dimmer_01
  {
    mesh                                "Dimmer.im"
    auto-create                         1
    att                                 "a.dimmer1"
    att-parent                          "default"
  }
  dimmer_02
  {
    mesh                                "Dimmer.im"
    auto-create                         1
    att                                 "a.dimmer2"
    att-parent                          "default"
  }
  schluessel_l01
  {
    mesh                                "BKS_Zylinder.im"
    auto-create                         1
    att                                 "a.schloss"
    att-parent                          "default"
  }
  schluessel01
  {
    kind                                "lever"
    mesh                                "BKS_Schluessel.im"
    auto-create                         1
    att                                 "a.schloss"
    limits                              0,2
    angles                              0,1.75
    notches                             0,0.5,1
    notchheight                         1,2,1
    radius                              0.1
  }
  taster_reserve_01
  {
    mesh                                "Drucktasterring.im"
    auto-create                         1
    att                                 "a.reserve1"
    att-parent                          "default"
  }
  taster_reserve01
  {
    kind                                "pullrope"
    mesh                                "Drucktaster_gelb.im"
    auto-create                         1
    att                                 "a.reserve1"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  telefon_01
  {
    mesh                                "Telefonhalter.im"
    auto-create                         1
    att                                 "a.telefon"
    att-parent                          "default"
  }
  telefon01
  {
    kind                                "pullrope"
    mesh                                "Telefon.im"
    auto-create                         1
    att                                 "a.telefon"
    limits                              0,1
    angles                              0,0.005
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0.1
  }
  wheelslip_light
  {
    kind                                "light"
    auto-create                         0
    mesh                                "schleuder.im"
  }
  notaus_01
  {
    mesh                                "notaus_ring.im"
    auto-create                         1
    att                                 "a.notaus"
    att-parent                          "default"
  }
  notaus01
  {
    kind                                "pullrope"
    mesh                                "notaus.im"
    auto-create                         1
    att                                 "a.notaus"
    limits                              0,1
    angles                              0.005,0
    notches                             0,1
    notchheight                         2,2
    mousespeed                          4
    radius                              0
  }
  fenster_links
  {
    mesh                                "Seitenfenster_L.im"
    anim                                "Seitenfenster_L.kin"
    auto-create                         1
    att                                 "a.fenster_links"
    limits                              0,1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,1,1,1,1
    att-parent                          "default"
    kind                                "animated-lever"
    mousespeed                          -1
  }
  fenster_rechts
  {
    mesh                                "Seitenfenster_R.im"
    anim                                "Seitenfenster_R.kin"
    auto-create                         1
    att                                 "a.fenster_rechts"
    limits                              0,1
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,1,1,1,1
    att-parent                          "default"
    kind                                "animated-lever"
    mousespeed                          -1
  }
}
kuid-table
{
}
Файлы:
armaturenbrett_2.texture.txt	39 B
armaturenbrett_2.tga	210 B
drehschalter.texture.txt	35 B
display_01.texture.txt	33 B
dimmer.im	2.7 kB
bremshebel.im	6.4 kB
bks_zylinder.im	5.0 kB
bks_schluessel.im	2.8 kB
bremshebelkonsole.im	3.2 kB
drehschalter_gross.im	2.6 kB
drucknadel_rot_weiss.im	4.0 kB
drucknadel_rot.im	2.0 kB
drehschalter.im	3.9 kB
drehschalterkonsole.im	1.2 kB
druckspeicher.texture.txt	36 B
drucktaster_gruen.im	2.7 kB
drucktaster_rot.im	2.7 kB
drucknadel_gelb.im	2.0 kB
drucktaster_schwarz.im	2.7 kB
drucktaster_weiss.im	2.7 kB
drucktaster_gelb.im	2.7 kB
drucktasterring.im	7.2 kB
fensterfarbe.tga	210 B
env_metal.texture.txt	32 B
funk.texture.txt	27 B
fensterfarbe.texture.txt	35 B
gashebel.im	3.4 kB
gashebel.texture.txt	31 B
gaskonsole.im	3.9 kB
gelb.texture.txt	27 B
gitter.texture.txt	29 B
gitter.tga	12.0 kB
gashebel.tga	1.5 kB
grau.texture.txt	27 B
gruen.texture.txt	28 B
gruen.tga	210 B
innenverkleidung.texture.txt	39 B
innenverkleidung.tga	210 B
grau.tga	12.0 kB
env_metal.bmp	12.1 kB
kippschalter_1.im	3.4 kB
kippschalterkonsole.im	1.3 kB
kippschalter_2.im	5.1 kB
lampenfeld.texture.txt	33 B
drehschalter.tga	12.0 kB
lampenfeld.tga	12.0 kB
notaus.im	3.9 kB
lzb.texture.txt	26 B
funk.tga	96.0 kB
gelb.tga	210 B
rot.texture.txt	26 B
schalter_1.texture.txt	33 B
rot.tga	210 B
notaus_ring.im	1.2 kB
lzb.tga	48.0 kB
schalter_1.tga	12.0 kB
schleuderanzeige.texture.txt	39 B
schleuderanzeige.tga	210 B
schwarz-schwarz.texture.txt	49 B
schwarz.texture.txt	30 B
schwarz.tga	210 B
seitenfenster_l.im	8.1 kB
seitenfenster_r.im	8.7 kB
schleuder.im	1.3 kB
leuchtenfeld.im	71.2 kB
seitenfenster_r.kin	3.7 kB
seitenfenster_l.kin	3.7 kB
lint_interior.im	62.3 kB
sound
sound / bremshebel.wav	3.1 kB
sound / cabin.txt	1.9 kB
sound / kippschalter2_aus.wav	1.7 kB
sound / kippschalter_ein.wav	3.7 kB
sound / schalter.wav	11.5 kB
sound / drehschalter2.wav	15.5 kB
sound / signal.wav	15.7 kB
sound / telefon_ab.wav	19.1 kB
sound / telefon_auf.wav	10.9 kB
sound / tuerfreigabe.wav	50.7 kB
sound / pzb_signal.wav	47.4 kB
sound / schliessvorgang.wav	308.5 kB
sound / stop.wav	392.5 kB
sound / zugbeeinflussung.wav	217.7 kB
speicherdruck.im	7.2 kB
tacho.im	7.2 kB
tachogehaeuse.texture.txt	36 B
tachogehaeuse.tga	210 B
tachonadel.texture.txt	33 B
tachoring-tachoring.texture.txt	53 B
tachonadel.tga	1.5 kB
tachonadel.im	2.0 kB
display_01.tga	768.0 kB
tachoscheibe2b.texture.txt	37 B
weiss.texture.txt	28 B
weiss.tga	210 B
telefonhalter.im	14.1 kB
telefon.im	5.7 kB
thumbnail.jpg	36.6 kB
zielanzeige.texture.txt	34 B
zielanzeige.tga	384.0 kB
tachoring.tga	1.0 MB
druckspeicher.tga	768.0 kB
tachoscheibe2b.tga	768.0 kB
tachoring.bmp	257.1 kB
Общий объём файлов:	5.5 MB
Версии элемента:
kuid	kind	name	build	date	size
<kuid2:96775:55157:1>	interior	Lint 41 Interior	3.7	27.09.2025 6:51:24	2.7 MB
Зависимости:
kuid	author	kind	name	build	date	size
Нет
Зависимые элементы:
kuid	author	kind	name	build	date	size
<kuid2:96775:850411:1>	#96775	traincar	Lint41 A Lokaltog	4.3	27.09.2025 6:51:02	2.1 MB
<kuid2:96775:850411:2>	#96775	traincar	Lint41 A Lokaltog	4.3	27.09.2025 6:51:37	2.2 MB
<kuid2:96775:850411:3>	#96775	traincar	Lint41 A Lokaltog	4.3	27.09.2025 6:51:57	2.2 MB
<kuid2:96775:850412:1>	#96775	traincar	Lint41 B Lokaltog	4.3	27.09.2025 6:52:17	2.1 MB
<kuid2:96775:850412:2>	#96775	traincar	Lint41 B Lokaltog	4.3	27.09.2025 6:52:37	2.1 MB
<kuid2:96775:850412:3>	#96775	traincar	Lint41 B Lokaltog	4.3	27.09.2025 6:52:58	2.1 MB