<kuid:84726:38004> Inspection Pit

Тип: Мост
Опубликовано: 16.07.2020 12:50:00
Скачиваний: 101
Размер: 749.7 kB

Скачать

This is an inpection pit that would be outside of a backshop or near a mainline servicing terminal. This is where locomotives would receive their inspections prior to maintenance. Usually, this facility would be 90 feet long to accomodate two locomotives at a time. It should be covered when not in use. This model uses Mike10's rails only tracks and Andi Smith's (andi6) AJS Dighole.
In order to install this pit properly, you must use dighole to create the hole in the ground first. Dighole is KUID 122285:1010. It makes a 1x1 grid hole in the terrain that you can then place the inspection pit over. Note how the inspection pit has ramps to allow workers to enter. Be sure to place the pit over the hole appropriately in order to show the ramps.
This package updated to fix a problem with DLS.

config.txt:

kuid                                    <kuid:84726:38004>
kind                                    "bridge"
type                                    "Rails"
region                                  "USA"
length                                  15.24
height                                  -15
bridgetrack                             <kuid:35412:38051>
trackoffsets                            -0.001
rgb                                     255,200,0
casts_shadows                           0
istrack                                 1
initiator                               "end1"
terminator                              "end2"
endlength                               6.09
kuid-table
{
  0<kuid:35412:38051>                   
  1<kuid:122285:1010>                   
}
obsolete-table
{
  0                                     <kuid:84726:38001>
}
name                                    "Inspection Pit"
description                             "This is an inpection pit that would be outside of a backshop or near a mainline servicing terminal.  This is where locomotives would receive their inspections prior to maintenance. Usually, this facility would be 90 feet long to accomodate two locomotives at a time.  It should be covered when not in use.  This model uses Mike10's rails only tracks and Andi Smith's (andi6) AJS Dighole.
In order to install this pit properly, you must use dighole to create the hole in the ground first.  Dighole is KUID 122285:1010.  It makes a 1x1 grid hole in the terrain that you can then place the inspection pit over.  Note how the inspection pit has ramps to allow workers to enter.  Be sure to place the pit over the hole appropriately in order to show the ramps.
This package updated to fix a problem with DLS."
trainz-build                            2.2
category-class                          "TB"
category-region-0                       "US"
category-region-1                       "CA"
category-region-2                       "AU"
category-region-3                       "GB"
category-era-0                          "1900s"
category-era-1                          "1910s"
category-era-2                          "1920s"
category-era-3                          "1930s"
category-era-4                          "1940s"
category-era-5                          "1950s"
category-era-6                          "1960s"
category-era-7                          "1970s"
category-era-8                          "1980s"
category-era-9                          "1990s"
category-era-10                         "2000s"
asset-filename                          "inspection_pit"
username                                "Inspection Pit"
folder-icon                             "9"
thumbnail                               
author                                  "Stephen Migol"
organisation                            ""
contact-email                           "macman@migol.com"
contact-website                         ""
license                                 "These models are free to use in Trainz so long as the textures associated with the packages are not altered.  If you want changes or have ideas for other variations, email me.

Thank you,

Stephen"

Файлы:

end1
end1 / end1.im	1.6 kB
end1 / gradient.texture.txt	31 B
end1 / gradient.tga	384.0 kB
end2
end2 / end2.im	1.6 kB
end2 / gradient.texture.txt	31 B
end2 / gradient.tga	384.0 kB
gradient.texture.txt	31 B
gradient.tga	384.0 kB
inspection_pit.im	9.5 kB
Общий объём файлов:	1.1 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:84726:38004>	bridge	Inspection Pit	2.2	16.07.2020 12:50:00	749.7 kB
<kuid:84726:38001>	Unknown

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:60349:2072275783>	#60349	map	Depedency Map	2.4	10.08.2023 15:50:55	19.3 kB
<kuid2:179051:100421:10>	#179051	map	Cornish Railways v1.3	4.7	13.05.2023 20:39:46	432.4 MB
<kuid2:203554:100558:9>	#203554	map	TRS19 - NS Sandusky District - Stage 2 - Route	4.6	8.05.2023 13:34:08	26.7 MB
<kuid2:203554:100558:12>	#203554	map	TRS19 - NS Sandusky District - Stage 2 - Route	4.6	14.05.2023 0:28:24	26.7 MB
<kuid:781347:102802>	#781347	map	Kickstarter County 2 Modified	4.9	8.11.2021 13:36:22	40.3 MB