Turntable from Vordernberg train station, located in Styria / Austria at an altitude of 781 m. Only parts are still in operation. Belongs to the museum route EBB (ErzBergBahn)--- the following procedure: - Position the turntable and lock the layer created specifically for the turntable. - Position the roundhouse and lock the layer created specifically for the roundhouse. - Hide the roof (if you haven't already done so) - There is a small mark in front of each pit.
Now take the supplied double gate -EBB gates... - (with or without door) and position the gate by clicking on the marking. Rotate the gate with control/rotate tool appropriately, so that the vertical beams fill the clear space. Now you can lay a track. From the outer spline point of the table towards the gate. Here you can use any tracks. From the rear spline point of the gate, you draw an invisible track over the pits to the mark behind the shed, which can only be seen if the terrain is transparent. An invisible buffer was to be placed here.