<kuid2:74222:12678:2> KC-135R Stratotanker Aircraft USAF Edwards AFB startup

Тип: traincar
Опубликовано: 12.01.2021 19:39:50
Скачиваний: 41
Размер: 5.0 MB

Скачать

A KC-135R Stratotanker aircraft of the USAF, CFM 56 engines, 412th test wing, Edwards AFB, startup model.

It operates on invisible track and will load passengers and general goods at a suitable landing area. The aircraft has an automatically operating landing gear. This retracts at takeoff speed set in the string table above. It lowers at speeds below this value. The speeds for tilting, landing, flap retraction and gear retraction on takeoff may be altered in the string table above - speeds are in kph. Landing value is a fraction of the full speed.

It does not have an operating interior, but does have various exterior views based on an invisible interior, use the [ and ] keys from the interior view. The aircraft will load and unload passengers at suitable airports.

The aircraft has a number of animations that can be operated by keyboard keys, or the Aircraft Action Trigger, kuid2:76656:24060:1, when placed on track and set to the correct number:

- to start engines, press the B key or use trigger setting 2. An engine start rule is also available for AI.
- flare for landing, V key, or trigger 7.
- deploy refueling probe and lift aircraft, H key, or setting 10
- issue smoke and sound from the tyres when landing, use trigger setting 4.
- the flaps operate automatically at speeds changeable in the string table above.
- come to a gradual stop on landing, trigger setting 9.
- use reverse thrust on engines for 10 seconds trigger setting 13.
- set speed to 40% of maximum speed, for landing approach, trigger setting 14.

The aircraft deploys a refueling probe to couple with the FA-18 fighters for simulated refueling. The KC-135 operates on the same track as the other aircraft. Using the H key or Action Trigger setting 10, the tanker lifts above the track by 7 metres and deploys the probe.

The FA-18 approaching from the rear couples with the probe with its own refueling probe. A second trigger further along the track retracts the tanker probe, and lowers the KC-135 back to track level. After you decouple the FA-18, the aircraft operate separately again. If you use the H key when the aircraft are coupled, the FA-18 fires missiles, it may shoot down the tanker - use the track trigger at setting 10 for best operation.

config.txt:

trainz-build                            3.5
category-class                          "AL"
nightmode                               "lamp"
disable-extra-track-sounds              1
kuid                                    <kuid2:74222:12678:2>
engine                                  1
mass                                    10000
kind                                    "traincar"
script                                  "aircraft166"
class                                   "aircraft"
category-keyword                        "aircraft;tanker;boeing;kc135;startup"
bogeys
{
  0
  {
    reversed                            0
    bogey                               <kuid:-10:149>
  }
  1
  {
    reversed                            0
    bogey                               <kuid:-10:149>
  }
}
enginespec                              <kuid2:60238:51019:3>
enginesound                             <kuid2:60238:53037:1>
hornsound                               <kuid2:60238:54027:1>
interior                                <kuid2:60238:55015:2>
soundscript
{
  engine
  {
    trigger                             "engine"
    attachment                          "a.sound0"
    nostartdelay                        0
    repeat-delay                        -0,-0
    distance                            20,170
    sound
    {
      0                                 "engine.wav"
    }
  }
}
username                                "KC-135R Stratotanker Aircraft USAF Edwards AFB startup"
mesh-table
{
  default
  {
    mesh                                "body/base.im"
    anim                                "body/base.kin"
    auto-create                         1
  }
  base_flare
  {
    mesh                                "body/base_flare.im"
    anim                                "body/base_flare.kin"
    auto-create                         1
    att                                 "a.origin"
    att-parent                          "default"
  }
  flashers
  {
    mesh                                "body/flashers.im"
    att                                 "a.origin_flare"
    att-parent                          "base_flare"
    effects
    {
      flasher0
      {
        kind                            "attachment"
        att                             "a.marker0"
        default-mesh                    <kuid2:60238:1000023:2>
      }
      flasher1
      {
        kind                            "attachment"
        att                             "a.marker1"
        default-mesh                    <kuid2:60238:1000021:2>
      }
      flasher2
      {
        kind                            "attachment"
        att                             "a.marker2"
        default-mesh                    <kuid2:60238:1000021:2>
      }
    }
  }
  body
  {
    mesh                                "body/body.im"
    auto-create                         1
    att                                 "a.origin_flare"
    att-parent                          "base_flare"
  }
  wheels
  {
    mesh                                "body/wheels.im"
    anim                                "body/wheels.kin"
    auto-create                         1
    att                                 "a.origin_flare"
    att-parent                          "base_flare"
  }
  rotor0
  {
    mesh                                "body/rotor.im"
    anim                                "body/rotor.kin"
    auto-create                         1
    att                                 "a.rotor0"
    att-parent                          "body"
  }
  rotor1
  {
    mesh                                "body/rotor.im"
    anim                                "body/rotor.kin"
    auto-create                         1
    att                                 "a.rotor1"
    att-parent                          "body"
  }
  rotor2
  {
    mesh                                "body/rotor.im"
    anim                                "body/rotor.kin"
    auto-create                         1
    att                                 "a.rotor2"
    att-parent                          "body"
  }
  rotor3
  {
    mesh                                "body/rotor.im"
    anim                                "body/rotor.kin"
    auto-create                         1
    att                                 "a.rotor3"
    att-parent                          "body"
  }
  flaps
  {
    mesh                                "body/flaps.im"
    anim                                "body/flaps.kin"
    auto-create                         1
    att                                 "a.origin_flare"
    att-parent                          "base_flare"
  }
  probe
  {
    mesh                                "body/fuelprobe.im"
    anim                                "body/fuelprobe.kin"
    auto-create                         1
    att                                 "a.origin_flare"
    att-parent                          "base_flare"
    use-parent-bounds                   1
  }
  pilot_right
  {
    mesh-asset                          <kuid2:60238:60068:1>
    mesh                                "pilot_110.im"
    auto-create                         0
    att                                 "a.pilot_right"
    att-parent                          "body"
  }
  pilot_left
  {
    mesh-asset                          <kuid2:60238:60068:1>
    mesh                                "pilot_110.im"
    auto-create                         0
    att                                 "a.pilot_left"
    att-parent                          "body"
  }
  seat_right
  {
    mesh-asset                          <kuid2:60238:60064:1>
    mesh                                "seat108.im"
    auto-create                         1
    att                                 "a.pilot_right"
    att-parent                          "body"
  }
  seat_left
  {
    mesh-asset                          <kuid2:60238:60064:1>
    mesh                                "seat108.im"
    auto-create                         1
    att                                 "a.pilot_left"
    att-parent                          "body"
  }
  shadow
  {
    mesh                                "shadow/shadow_inv.im"
  }
}
smoke0
{
  attachment                            "a.wheel_smoke0"
  mode                                  "time"
  color                                 94,94,94
  start                                 0
  rate                                  10
  velocity                              6
  lifetime                              1
  minsize                               0.2
  maxsize                               1.5
  accel                                 0.1,0.1,0.25
  inherit-velocity                      1
  enabled                               0
}
smoke1
{
  attachment                            "a.wheel_smoke1"
  mode                                  "time"
  color                                 94,94,94
  start                                 0
  rate                                  10
  velocity                              6
  lifetime                              1
  minsize                               0.2
  maxsize                               1.5
  accel                                 0.1,0.1,0.25
  inherit-velocity                      1
  enabled                               0
}
string-table
{
  takeoff-speed                         "240"
  tilt-speed                            "45"
  flap-retraction                       "280"
  landing-speed                         "0.4"
}
queues
{
  passengers
  {
    size                                10
    initial-count                       4
    passenger-queue                     "1"
    product-kuid                        <kuid:-3:10060>
  }
  load0
  {
    size                                50
    initial-count                       10
    product-kuid                        <kuid:-3:10013>
    allowed-products
    {
      0                                 <kuid:-3:10013>
    }
  }
}
thumbnails
{
  0
  {
    image                               "preview.jpg"
    width                               240
    height                              180
  }
}
description                             "A KC-135R Stratotanker aircraft of the USAF, CFM 56 engines, 412th test wing, Edwards AFB, startup model. 

It operates on invisible track and will load passengers and general goods at a suitable landing area. The aircraft has an automatically operating landing gear. This retracts at takeoff speed set in the string table above. It lowers at speeds below this value. The speeds for tilting, landing, flap retraction and gear retraction on takeoff may be altered in the string table above - speeds are in kph. Landing value is a fraction of the full speed.

It does not have an operating interior, but does have various exterior views based on an invisible interior, use the [ and ] keys from the interior view. The aircraft will load and unload passengers at suitable airports.

The aircraft has a number of animations that can be operated by keyboard keys, or the Aircraft Action Trigger, kuid2:76656:24060:1, when placed on track and set to the correct number:

- to start engines, press the B key or use trigger setting 2. An engine start rule is also available for AI.
- flare for landing, V key, or trigger 7.
- deploy refueling probe and lift aircraft, H key, or setting 10
- issue smoke and sound from the tyres when landing, use trigger setting 4. 
- the flaps operate automatically at speeds changeable in the string table above.
- come to a gradual stop on landing, trigger setting 9.
- use reverse thrust on engines for 10 seconds trigger setting 13.
- set speed to 40% of maximum speed, for landing approach, trigger setting 14.

The aircraft deploys a refueling probe to couple with the FA-18 fighters for simulated refueling. The KC-135 operates on the same track as the other aircraft. Using the H key or Action Trigger setting 10, the tanker lifts above the track by 7 metres and deploys the probe.

The FA-18 approaching from the rear couples with the probe with its own refueling probe. A second trigger further along the track retracts the tanker probe, and lowers the KC-135 back to track level. After you decouple the FA-18, the aircraft operate separately again. If you use the H key when the aircraft are coupled, the FA-18 fires missiles, it may shoot down the tanker - use the track trigger at setting 10 for best operation."
author                                  "Ian Manion (Vulcan)"
organisation                            "Ianz Trainz"
contact-website                         "http://www.ianztrainz.com/index.html"
license                                 "This file is released free of charge for you to use. You may not host on a webserver or redistribute the model without my permission, and if permitted, only as long as you do not do so for profit. This licence file must be included with any permitted redistribution. Copyright of the model and original textures remains with Ian Manion (Vulcan)."
kuid-table
{
  enginespec                            <kuid2:60238:51019:3>
  enginesound                           <kuid2:60238:53037:1>
  hornsound                             <kuid2:60238:54027:1>
  interior                              <kuid2:60238:55015:2>
  bogey                                 <kuid:-10:149>
  passengers                            <kuid:-3:10060>
  corona_green                          <kuid2:60238:1000023:2>
  corona_red                            <kuid2:60238:1000021:2>
  load0                                 <kuid:-3:10013>
  trigger                               <kuid2:76656:24060:1>
  engine_start_rule                     <kuid2:60238:80004:1>
  pilots                                <kuid2:60238:60068:1>
  seats                                 <kuid2:60238:60064:1>
}

Файлы:

body
body / base_flare.im	1.5 kB
body / body_kc135.texture.txt	41 B
body / base.im	1.5 kB
body / env_metal.texture.txt	32 B
body / flaps.im	8.2 kB
body / flashers.im	1.5 kB
body / fuelprobe.im	9.7 kB
body / base_flare.kin	7.2 kB
body / glass.texture.txt	28 B
body / glass.tga	12.5 kB
body / green_glass.texture.txt	34 B
body / green_glass.tga	13.0 kB
body / env_metal.bmp	12.1 kB
body / rotor.im	5.7 kB
body / rotor.kin	2.5 kB
body / shadowblack.texture.txt	34 B
body / shadowblack.tga	1.8 kB
body / flaps.kin	30.9 kB
body / fuelprobe.kin	19.8 kB
body / body.im	208.8 kB
body / wheels.im	133.9 kB
body / kc135.im	176.6 kB
body / base.kin	14.3 kB
body / wheels.kin	97.3 kB
body / body_kc135-edwards.tga	12.0 MB
shadow
shadow / shadow_inv.im	1.3 kB
shadow / shadowblack.texture.txt	34 B
shadow / shadowblack.tga	1.8 kB
shadow / shadow.im	18.4 kB
aircraft166.gs	16.1 kB
preview.jpg	48.0 kB
probe_motor.wav	43.1 kB
engine.wav	204.6 kB
tyres.wav	57.0 kB
start.wav	409.2 kB
reverse.wav	509.6 kB
stop.wav	583.7 kB
turbine.wav	599.2 kB
Общий объём файлов:	15.2 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:74222:12678:2>	traincar	KC-135R Stratotanker Aircraft USAF Edwards AFB startup	3.5	12.01.2021 19:39:50	5.0 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-10:149>	#-10	bogey	Тележка_невидимая	0	18.04.2023 0:03:42	1.4 kB
<kuid:-3:10013>	#-3	product	Товары	0	25.06.2020 16:55:55	158.0 kB
<kuid:-3:10060>	#-3	product	Passengers	2.9	12.06.2020 2:08:26	10.3 MB
<kuid2:60238:51019:3>	#60238	engine	Boeing 747-400 Engine config	3.5	18.08.2015 21:58:21	15.9 kB
<kuid2:60238:53037:1>	#60238	enginesound	Bombardier Challenger Engine Sound Startup	2.8	12.06.2020 19:25:42	5.9 MB
<kuid2:60238:54027:1>	#60238	hornsound	Silent Horn Sound for Helicopters	2.7	12.06.2020 19:16:45	8.1 kB
<kuid2:60238:55015:3>	#60238	interior	Canal Boat 1 Interior	2.4	8.01.2018 22:54:43	13.5 kB
<kuid2:60238:60064:1>	#60238	mesh	Pilots Seats Military Mesh Library	3.5	13.07.2020 16:47:47	529.7 kB
<kuid2:60238:60068:1>	#60238	mesh	Figure Pilots Military Mesh Library	3.5	24.06.2020 9:46:17	1.9 MB
<kuid2:60238:80004:1>	#60238	drivercommand	Aircraft Engine Start Command	2.7	5.06.2020 18:52:39	25.2 kB
<kuid2:60238:1000021:2>	#60238	mesh	Aircraft Flasher Red Mesh	2.6	12.06.2020 19:19:59	8.0 kB
<kuid2:60238:1000023:2>	#60238	mesh	Aircraft Flasher Green Mesh	2.6	12.06.2020 19:17:37	7.7 kB
<kuid2:76656:24060:1>	#76656	scenery	Aircraft Action Trigger - TS12 & T:ANE version	3.5	20.04.2023 14:27:36	29.6 kB
Всего связей: 13, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет