<kuid2:74222:12590:1> Junkers JU-52 Milka Aircraft Startup

Тип: traincar
Опубликовано: 20.04.2021 20:16:35
Скачиваний: 50
Размер: 5.8 MB

Скачать

A Junkers JU-52 Transport aircraft. Milka livery. Reskin by Papou with permission.

It operates on invisible track and will load passengers and general goods at a suitable landing area. The aircraft has an automatically operating landing gear. This retracts at takeoff speed (160 kph) set in the script. It lowers at speeds below 160kph. The speeds for tilting, prop changeover speed and landing gear retraction on takeoff may be altered in the string table above - speeds are in kph. Note landing speed above is a fraction of full speed, eg 0.4, not kph.

The aircraft initially has the engines stopped. Use the B key to start or stop the engines. For AI operations, use the Aircraft Engine Start Rule, kuid2:60238:80004:1

It does not have an operating interior, but does have various exterior views based on an invisible interior, use the [ and ] keys from the interior view. The aircraft will load and unload passengers at suitable airports.

The aircraft has animations that can be operated by keyboard keys, or the Aircraft Action Trigger, kuid:76656:24050, when placed on track and set to the correct number:

- initially the propellers are stationary, use the B key or triggger setting 2 to start or stop the engines;
- flare on landing, use the V key or trigger setting 3;
- open side door, H key;
- emit smoke and sound from the tyres when landing, trigger setting 4;
- the flaps operate automatically at speeds below 200 kph, changeable in the string table above;
- come to a gradual stop on landing, trigger setting 9;
- set speed to 40% of maximum speed, for landing approach, trigger setting 14.

Military and commercial aircraft sometimes use the same keys and trigger settings for differerent animations. If you find conflict on the same route, set the train priority of the trigger and the particular aircraft to a different value to differentiate.

Note: Shadow models are required but cannot be animated to follow aircraft animation in TS12. If you do not like the shadow showing on the body of the aircraft, in the config call up the shadow_inv.im file which is an invisible shadow.

config.txt:

kuid                                    <kuid2:74222:12590:1>
kind                                    "traincar"
mass                                    29000
engine                                  1
fonts                                   0
nightmode                               "lamp"
enginespec                              <kuid2:60238:51048:1>
enginesound                             <kuid2:60238:53064:1>
hornsound                               <kuid2:60238:54027:1>
interior                                <kuid2:60238:55015:1>
category-keyword                        "aircraft;junkers;ju52;switzerland"
disable-extra-track-sounds              1
category-era                            "1930s;1940s;1950s"
category-region                         "DE"
script                                  "aircraft197"
class                                   "aircraft"
soundscript
{
  engine
  {
    trigger                             "engine"
    attachment                          "a.sound0"
    nostartdelay                        0
    repeat-delay                        -0,-0
    distance                            20,170
    sound
    {
      0                                 "engine.wav"
    }
  }
}
bogeys
{
  0
  {
    reversed                            0
    bogey                               <kuid:-10:149>
  }
  1
  {
    reversed                            0
    bogey                               <kuid:-10:149>
  }
}
mesh-table
{
  default
  {
    mesh                                "body/base.im"
    anim                                "body/base.kin"
    auto-create                         1
  }
  flashers
  {
    mesh                                "body/flashers.im"
    att                                 "a.origin01"
    att-parent                          "base01"
    effects
    {
      flasher0
      {
        kind                            "attachment"
        att                             "a.marker0"
        default-mesh                    <kuid2:60238:1000034:1>
      }
      flasher1
      {
        kind                            "attachment"
        att                             "a.marker1"
        default-mesh                    <kuid2:60238:1000033:1>
      }
      flasher2
      {
        kind                            "attachment"
        att                             "a.marker2"
        default-mesh                    <kuid2:60238:1000034:1>
      }
    }
  }
  base01
  {
    mesh                                "body/base01.im"
    auto-create                         1
    anim                                "body/base01.kin"
    att                                 "a.origin"
    att-parent                          "default"
  }
  body
  {
    mesh                                "body/body.im"
    auto-create                         1
    att                                 "a.origin01"
    att-parent                          "base01"
  }
  prop0
  {
    mesh                                "body/prop2.im"
    anim                                "body/prop2.kin"
    auto-create                         1
    att                                 "a.propeller0"
    att-parent                          "body"
  }
  prop1
  {
    mesh                                "body/prop2.im"
    anim                                "body/prop2.kin"
    att                                 "a.propeller1"
    att-parent                          "body"
  }
  prop2
  {
    mesh                                "body/prop2.im"
    anim                                "body/prop2.kin"
    att                                 "a.propeller2"
    att-parent                          "body"
  }
  prop3
  {
    mesh                                "body/propdisk.im"
    anim                                "body/propdisk.kin"
    animation-loop-speed                "0.5"
    att                                 "a.propeller0"
    att-parent                          "body"
  }
  prop4
  {
    mesh                                "body/propdisk.im"
    att                                 "a.propeller1"
    anim                                "body/propdisk.kin"
    animation-loop-speed                "0.5"
    att-parent                          "body"
  }
  prop5
  {
    mesh                                "body/propdisk.im"
    att                                 "a.propeller2"
    anim                                "body/propdisk.kin"
    animation-loop-speed                "0.5"
    att-parent                          "body"
  }
  flaps
  {
    mesh                                "body/flaps.im"
    anim                                "body/flaps.kin"
    auto-create                         1
    att                                 "a.origin01"
    att-parent                          "base01"
  }
  aerial_loop
  {
    mesh                                "body/aerialloop.im"
    auto-create                         0
    att                                 "a.origin01"
    att-parent                          "base01"
  }
  wheel_fairing
  {
    mesh                                "body/fairing.im"
    auto-create                         0
    att                                 "a.origin01"
    att-parent                          "base01"
  }
  pilot
  {
    mesh                                "body/pilot1.im"
    auto-create                         1
    att                                 "a.origin01"
    att-parent                          "base01"
  }
  copilot
  {
    mesh                                "body/pilot2.im"
    auto-create                         1
    att                                 "a.origin01"
    att-parent                          "base01"
  }
  left-passenger-door
  {
    mesh                                "body/door.im"
    anim                                "body/door.kin"
    auto-create                         1
    att                                 "a.origin01"
    att-parent                          "base01"
  }
  default-night
  {
    mesh                                "body/night.im"
    att                                 "a.sound0"
    night-mesh-base                     "body"
    att-parent                          "body"
  }
  shadow
  {
    mesh                                "shadow/shadow_inv.im"
  }
}
queues
{
  passengers
  {
    size                                17
    initial-count                       4
    passenger-queue                     "1"
    product-kuid                        <kuid:-3:10060>
    attachment-points
    {
      0                                 "a.sitpoint0"
      1                                 "a.sitpoint1"
      2                                 "a.sitpoint2"
      3                                 "a.sitpoint3"
      4                                 "a.sitpoint4"
      5                                 "a.sitpoint5"
      6                                 "a.sitpoint6"
      7                                 "a.sitpoint7"
      8                                 "a.sitpoint8"
    }
  }
  load0
  {
    size                                20
    initial-count                       5
    product-kuid                        <kuid:-25:1149>
    allowed-products
    {
      0                                 <kuid:-25:1149>
    }
  }
}
smoke0
{
  attachment                            "a.wheel_smoke0"
  mode                                  "time"
  color                                 94,94,94
  start                                 0
  rate                                  10
  velocity                              6
  lifetime                              1
  minsize                               0.2
  maxsize                               1.5
  accel                                 0.1,0.1,0.25
  inherit-velocity                      1
  enabled                               0
}
smoke1
{
  attachment                            "a.wheel_smoke1"
  mode                                  "time"
  color                                 94,94,94
  start                                 0
  rate                                  10
  velocity                              6
  lifetime                              1
  minsize                               0.2
  maxsize                               1.5
  accel                                 0.1,0.1,0.25
  inherit-velocity                      1
  enabled                               0
}
smoke2
{
  attachment                            "a.smoke0"
  mode                                  "time"
  color                                 160,178,194,255
  accel                                 0,0,0
  start                                 0
  period                                86400
  rate                                  25
  velocity                              15
  lifetime                              0.5
  minsize                               0.25
  maxsize                               0.5
  enabled                               0
}
smoke3
{
  attachment                            "a.smoke1"
  mode                                  "time"
  color                                 160,178,194,255
  accel                                 0,0,0
  start                                 0
  period                                86400
  rate                                  25
  velocity                              15
  lifetime                              0.5
  minsize                               0.25
  maxsize                               0.5
  enabled                               0
}
smoke4
{
  attachment                            "a.smoke2"
  mode                                  "time"
  color                                 160,178,194,255
  accel                                 0,0,0
  start                                 0
  period                                86400
  rate                                  25
  velocity                              15
  lifetime                              0.5
  minsize                               0.25
  maxsize                               0.5
  enabled                               0
}
smoke5
{
  attachment                            "a.smoke3"
  mode                                  "time"
  color                                 160,178,194,255
  accel                                 0,0,0
  start                                 0
  period                                86400
  rate                                  25
  velocity                              15
  lifetime                              0.5
  minsize                               0.25
  maxsize                               0.5
  enabled                               0
}
string-table
{
  takeoff-speed                         "160"
  tilt-speed                            "45"
  tail-lift-speed                       "60"
  flap-retraction                       "200"
  prop-speed                            "30"
  landing-speed                         "0.4"
  gunner-showing                        "1"
}
username                                "Junkers JU-52 Milka Aircraft Startup"
trainz-build                            3.5
category-class                          "AL"
light_color                             255,255,255
ditch_color                             255,200,200
thumbnails
{
  0
  {
    image                               "preview.jpg"
    width                               240
    height                              180
  }
}
description                             "A Junkers JU-52 Transport aircraft. Milka livery. Reskin by Papou with permission.

It operates on invisible track and will load passengers and general goods at a suitable landing area. The aircraft has an automatically operating landing gear. This retracts at takeoff speed (160 kph) set in the script. It lowers at speeds below 160kph. The speeds for tilting, prop changeover speed and landing gear retraction on takeoff may be altered in the string table above - speeds are in kph. Note landing speed above is a fraction of full speed, eg 0.4, not kph.

The aircraft initially has the engines stopped. Use the B key to start or stop the engines. For AI operations, use the Aircraft Engine Start Rule, kuid2:60238:80004:1 

It does not have an operating interior, but does have various exterior views based on an invisible interior, use the [ and ] keys from the interior view. The aircraft will load and unload passengers at suitable airports.

The aircraft has animations that can be operated by keyboard keys, or the Aircraft Action Trigger, kuid:76656:24050, when placed on track and set to the correct number:

- initially the propellers are stationary, use the B key or triggger setting 2 to start or stop the engines;
- flare on landing, use the V key or trigger setting 3;
- open side door, H key;
- emit smoke and sound from the tyres when landing, trigger setting 4;
- the flaps operate automatically at speeds below 200 kph, changeable in the string table above;
- come to a gradual stop on landing, trigger setting 9;
- set speed to 40% of maximum speed, for landing approach, trigger setting 14.

Military and commercial aircraft sometimes use the same keys and trigger settings for differerent animations. If you find conflict on the same route, set the train priority of the trigger and the particular aircraft to a different value to differentiate.

Note: Shadow models are required but cannot be animated to follow aircraft animation in TS12. If you do not like the shadow showing on the body of the aircraft, in the config call up the shadow_inv.im file which is an invisible shadow."
author                                  "Ian Manion (Vulcan)"
contact-website                         "http://www.ianztrainz.com/index.html"
license                                 "This file is released free of charge for you to use. You may not host on a webserver or redistribute the model without my permission, and if permitted, only as long as you do not do so for profit. This licence file must be included with any permitted redistribution. Copyright of the model and original textures remains with Ian Manion (Vulcan)"
kuid-table
{
  enginespec                            <kuid2:60238:51048:1>
  hornsound                             <kuid2:60238:54027:1>
  interior                              <kuid2:60238:55015:1>
  bogey                                 <kuid:-10:149>
  passenger                             <kuid:-3:10060>
  enginesound                           <kuid2:60238:53064:1>
  flasher_red                           <kuid2:60238:1000034:1>
  flasher_green                         <kuid2:60238:1000033:1>
  goods                                 <kuid:-25:1149>
}

Файлы:

body
body / base.im	1.5 kB
body / aerialloop.im	6.6 kB
body / base01.im	2.9 kB
body / body2.texture.txt	28 B
body / door.im	5.8 kB
body / door.kin	3.7 kB
body / base.kin	7.2 kB
body / env_metal.texture.txt	32 B
body / fairing.im	12.9 kB
body / flaps.im	12.2 kB
body / flashers.im	1.5 kB
body / base01.kin	10.0 kB
body / green_glass.texture.txt	34 B
body / green_glass.tga	13.0 kB
body / night.im	1.3 kB
body / flaps.kin	10.0 kB
body / env_metal.bmp	12.1 kB
body / gunner.im	41.9 kB
body / pilot1.im	38.5 kB
body / pilot_luftwaffe.texture.txt	38 B
body / pilot2.im	38.5 kB
body / prop2.im	10.5 kB
body / prop2.kin	3.0 kB
body / gunner.kin	14.3 kB
body / prop2_white-prop2.texture.txt	51 B
body / propdisk.im	1.4 kB
body / shadowblack.texture.txt	34 B
body / shadowblack.tga	1.8 kB
body / turret_static.im	10.3 kB
body / wheels.im	91.0 kB
body / body.im	475.5 kB
body / propdisk.kin	14.3 kB
body / wheels.kin	64.1 kB
body / prop2_white.tga	193.0 kB
body / pilot_luftwaffe.tga	769.0 kB
body / prop2.bmp	192.1 kB
body / body2.tga	12.0 MB
shadow
shadow / shadow.im	23.4 kB
shadow / shadowblack.texture.txt	34 B
shadow / shadowblack.tga	1.8 kB
shadow / shadow_inv.im	1.3 kB
aircraft197.gs	14.4 kB
engine_fade.wav	172.3 kB
engine.wav	264.9 kB
preview.jpg	28.3 kB
tyres.wav	57.0 kB
stop.wav	322.3 kB
start.wav	1.0 MB
Общий объём файлов:	15.9 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:74222:12590:1>	traincar	Junkers JU-52 Milka Aircraft Startup	3.5	20.04.2021 20:16:35	5.8 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-25:1149>	#-25	product	Товары	3.5	14.10.2017 22:38:48	158.8 kB
<kuid:-10:149>	#-10	bogey	Тележка_невидимая	0	18.04.2023 0:03:42	1.4 kB
<kuid:-3:10060>	#-3	product	Passengers	2.9	12.06.2020 2:08:26	10.3 MB
<kuid2:60238:51048:1>	#60238	engine	Junkers JU-52 Engine config	3.5	16.07.2020 11:06:13	19.3 kB
<kuid2:60238:53064:1>	#60238	enginesound	Junkers JU-52 Startup Engine Sound	3.5	20.04.2021 20:06:18	4.9 MB
<kuid2:60238:54027:1>	#60238	hornsound	Silent Horn Sound for Helicopters	2.7	12.06.2020 19:16:45	8.1 kB
<kuid2:60238:55015:3>	#60238	interior	Canal Boat 1 Interior	2.4	8.01.2018 22:54:43	13.5 kB
<kuid2:60238:1000033:1>	#60238	mesh	Aircraft Flasher Green Mesh Single Pulse 2sec	2.9	7.01.2018 17:06:11	7.5 kB
<kuid2:60238:1000034:1>	#60238	mesh	Aircraft Flasher Red Mesh Single Pulse 2sec	2.9	7.01.2018 17:06:11	7.6 kB
Всего связей: 9, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет