<kuid2:73150:100493:1> NSW CityRail C set TS12 Control Car- Non Working Desto - Yellow

Скачать

The C sets were a follow-on from the K sets. They were built as an interim measure due to the lateness of the Tangara program. They were the first Sydney suburban trains to be fitted with chopper control, which gives the train smoother acceleration. Gate turn-off thyristors were used to control power to the traction motors, hence allowing for smoother acceleration. Following the success of the implementation of chopper control, these features were later installed on the Tangara and later V set carriages.

The C set carriages were also the first on the suburban network to feature fixed seating (originally covered with fabric, since replaced with vinyl). This proved to be unpopular, but despite this fixed seating was also used on the suburban Tangara cars. These cars also featured push-button doors requiring passengers to activate, to increase air-conditioning efficiency. These proved unpopular and the push-buttons on the doors were removed.

The C set is distinguished externally by a fibreglass molding mounted on the front of the power carriage. It was originally in the State Rail Authority white with orange and red candy livery stripes on the lower portion. C3596 was the only power car to have its Candy-liveried front repainted in CityRail blue and yellow prior to its Citydecker refurbishment in 1998. The chopper cars are amongst the heaviest in the suburban fleet, with the power cars weighing 52 tonnes.