This session is for Urban IndustRail 8a. All the items of rolling stock needed by the session will be downloaded from the Download Station when the session is installed, with the exception of the animated crane used to load the Tiger tanks on the flat wagons. The crane can be downloaded from:
http://www.trensim.com/lib/pafiledb.php?lib=trainz&action=file&id=68
Select descarger and then acepto to download the file, then install it into Trainz.
Bill, this is the Yard Foreman. The gantry crane at the Foundry is not functioning, so to load the Tigers onto the flat wagons you will have to use the rail mounted crane now in our yard. Sort the wagons with the little D2400 shunter, then use the Class 37 on the main line. The train, from south to north, should be formed up as Class 37, guards van, flat wagons and crane. The trip to the Foundry is a shunt movement, so you are authorised to propel the train northwards along the main line. Place the crane on the siding that is next to the siding that is adjacent to the loading platform, then load the Tigers onto the flat wagons with the rail crane. To rotate the jib of rail crane, activate NumLock and press the End key in the numeric keypad. After loading the tanks, leave the crane where it is. Unload the Tigers at the unloading ramp at Invercargill Station. They will drive off, so no crane is needed. Place the flats and guards van in Invercargill yard and report for further duties at Invercargill loco. I will send another crew in the D2400 to retrieve the rail crane you left at the Foundry.
Other trains will be running at 5 minute intervals.
Take care at the switch at the southern exit at Invercargill Harbor. It is set incorrectly and will need to be reset manually by you.
Maps, illustrations and a readme are included in the folder containing the session. If you want to be more slightly adventurous, the gantry crane at the unloading ramp at Picton is configured to unload the Tigers.
Тип: Сессия