<kuid2:60238:38650:1> Airport Rega Lausanne

Тип: Индустрия
Опубликовано: 16.07.2020 11:32:26
Скачиваний: 96
Размер: 573.7 kB

Скачать

An aircraft hangar for the Rega medical Service at Lausanne Switzerland, can be used for helicopters and light planes.

It has two fixed invisible tracks for aircraft, one in the hangar, the other ourside. On approaching the hangar doors they will open, and when the aircraft is inside the hanger, the doors will close. The invisible track extend beyond the rear of the building allowing the placement of a trackmark for the Drive to Trackmark command for entry to the hangar.

As the doors open slowly, if you use AI to operate the aircraft, place a speed limit sign of 5 kph in front of the doors so the aircraft travels slowly enough for the doors to open. When inside, reverse the aircraft slowly until the doors start to open, then stop and wait for that to be completed before driving out.

The heliport may be used for helicopters.

config.txt:

kuid                                    <kuid2:60238:38650:1>
type                                    "trackside"
light                                   1
height-range                            -10,30
script                                  "airport12"
class                                   "SmallStation"
nightmode                               "lamp"
category-region-0                       "AU"
category-era-0                          "1980s"
category-era-1                          "1990s"
category-era-2                          "2000s"
category-class                          "br"
trainz-build                            2.8
soundscript
{
  warning_bell
  {
    trigger                             "warningbell"
    attachment                          "a.sound0"
    nostartdelay                        1
    repeat-delay                        1
    distance                            5,200
    sound
    {
      warningbell.wav                   
    }
  }
}
mesh-table
{
  default
  {
    mesh                                "hangar.im"
    auto-create                         1
    effects
    {
      light0
      {
        kind                            "attachment"
        att                             "a.flasher0"
        default-mesh                    <kuid2:60238:1000021:1>
      }
      light1
      {
        kind                            "attachment"
        att                             "a.flasher1"
        default-mesh                    <kuid2:60238:1000021:1>
      }
    }
  }
  doors
  {
    mesh                                "doors.im"
    anim                                "doors.kin"
    auto-create                         1
    att-parent                          "default"
  }
  default-night
  {
    mesh                                "night.im"
    night-mesh-base                     "default"
  }
}
attached-track
{
  track0
  {
    track                               <kuid2:60238:37038:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track0a"
      1                                 "a.track0b"
      2                                 "a.track0c"
    }
  }
  track1
  {
    track                               <kuid2:60238:37038:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track1a"
      1                                 "a.track1b"
      2                                 "a.track1c"
    }
  }
  track2
  {
    track                               <kuid2:60238:37038:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track2a"
      1                                 "a.track2b"
      2                                 "a.track2c"
    }
  }
  track3
  {
    track                               <kuid2:60238:37038:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track0c"
      1                                 "a.track0d"
      2                                 "a.track0e"
      3                                 "a.track0f"
    }
  }
}
attached-trigger
{
  trigger_track_one_a
  {
    att                                 "a.track1a"
    radius                              4
    track                               "track1"
  }
  trigger_track_one_b
  {
    att                                 "a.track1b"
    radius                              4
    track                               "track1"
  }
  trigger_track_one_c
  {
    att                                 "a.track1c"
    radius                              4
    track                               "track1"
  }
  trigger_track_two_a
  {
    att                                 "a.track2a"
    radius                              4
    track                               "track2"
  }
  trigger_track_two_b
  {
    att                                 "a.track2b"
    radius                              3
    track                               "track2"
  }
  trigger_track_two_c
  {
    att                                 "a.track2c"
    radius                              4
    track                               "track2"
  }
  trigger_track_three_a
  {
    att                                 "a.track0b"
    radius                              2
    track                               "track0"
  }
  trigger_track_three_b
  {
    att                                 "a.track0c"
    radius                              10
    track                               "track0"
  }
  trigger_track_three_c
  {
    att                                 "a.track0d"
    radius                              5
    track                               "track0"
  }
  centre1
  {
    att                                 "a.doors0"
    radius                              10
  }
  centre0
  {
    att                                 "a.doors1"
    radius                              5
  }
  centre2
  {
    att                                 "a.doors2"
    radius                              2
  }
}
queues
{
  passengers_on_0
  {
    passenger-queue                     1
    size                                5
    initial-count                       2
    product-kuid                        <kuid:-3:10060>
    attachment-points
    {
      0                                 "a.passon1"
      1                                 "a.passon2"
      2                                 "a.passon3"
    }
  }
  passengers_on_1
  {
    passenger-queue                     1
    size                                5
    initial-count                       1
    product-kuid                        <kuid:-3:10060>
    attachment-points
    {
      0                                 "a.passon4"
      1                                 "a.passon5"
    }
  }
  passengers_on_2
  {
    passenger-queue                     1
    size                                2
    initial-count                       1
    product-kuid                        <kuid:-3:10060>
  }
  passengers_off_0
  {
    passenger-queue                     1
    size                                5
    initial-count                       0
    product-kuid                        <kuid:-3:10060>
    attachment-points
    {
      0                                 "a.passoff1"
      1                                 "a.passoff2"
      2                                 "a.passoff3"
    }
  }
  passengers_off_1
  {
    passenger-queue                     1
    size                                5
    initial-count                       0
    product-kuid                        <kuid:-3:10060>
    attachment-points
    {
      0                                 "a.passoff4"
      1                                 "a.passoff5"
    }
  }
  passengers_off_2
  {
    passenger-queue                     1
    size                                5
    initial-count                       0
    product-kuid                        <kuid:-3:10060>
  }
}
processes
{
  passenger_spawn_0
  {
    start-enabled                       1
    duration                            20
    outputs
    {
      0
      {
        amount                          1
        queue                           "passengers_on_0"
      }
    }
  }
  passenger_spawn_1
  {
    start-enabled                       1
    duration                            20
    outputs
    {
      0
      {
        amount                          1
        queue                           "passengers_on_1"
      }
    }
  }
  passenger_spawn_2
  {
    start-enabled                       1
    duration                            20
    outputs
    {
      0
      {
        amount                          1
        queue                           "passengers_on_2"
      }
    }
  }
  passenger_delete_0
  {
    start-enabled                       1
    duration                            3
    inputs
    {
      0
      {
        amount                          1
        queue                           "passengers_off_0"
      }
    }
  }
  passenger_delete_1
  {
    start-enabled                       1
    duration                            3
    inputs
    {
      0
      {
        amount                          1
        queue                           "passengers_off_1"
      }
    }
  }
  passenger_delete_2
  {
    start-enabled                       1
    duration                            3
    inputs
    {
      0
      {
        amount                          1
        queue                           "passengers_off_2"
      }
    }
  }
}
string-table
{
  airport                               "Airport"
  heliport                              "Helipad"
  hangar                                "Hangar"
}
icon0                                   <kuid:-3:10164>
thumbnails
{
  0
  {
    image                               "preview.jpg"
    width                               240
    height                              180
  }
  1
  {
    image                               "icon_rega.tga"
    width                               64
    height                              64
  }
}
username                                "Airport Rega Lausanne"
description                             "An aircraft hangar for the Rega medical Service at Lausanne Switzerland, can be used for helicopters and light planes. 

It has two fixed invisible tracks for aircraft, one in the hangar, the other ourside. On approaching the hangar doors they will open, and when the aircraft is inside the hanger, the doors will close. The invisible track extend beyond the rear of the building allowing the placement of a trackmark for the Drive to Trackmark command for entry to the hangar.

As the doors open slowly, if you use AI to operate the aircraft, place a speed limit sign of 5 kph in front of the doors so the aircraft travels slowly enough for the doors to open. When inside, reverse the aircraft slowly until the doors start to open, then stop and wait for that to be completed before driving out.

The heliport may be used for helicopters."
author                                  "Ian Manion (Vulcan)"
organisation                            "Ianz Trainz"
contact-website                         "http://www.ianztrainz.com/index.html"
license                                 "This file is released free of charge for you to use. You may not host on a webserver or redistribute the model without my permission, and if permitted, only as long as you do not do so for profit. This licence file must be included with any permitted redistribution. Copyright of the model and original textures remains with Ian Manion (Vulcan)."
kind                                    "industry"
kuid-table
{
  track                                 <kuid2:60238:37038:1>
  icon                                  <kuid:-3:10164>
  flasher_red                           <kuid2:60238:1000023:1>
  passenger                             <kuid:-3:10060>
  0                                     <kuid2:60238:1000021:1>
}

Файлы:

airport12.gs	5.2 kB
doors.im	17.2 kB
doors.kin	95.7 kB
grey_glass.texture.txt	33 B
grey_glass.tga	13.0 kB
hangar.gs	2.2 kB
hangar.im	253.1 kB
hangar2.texture.txt	30 B
hangar2.tga	193.0 kB
helipad2.texture.txt	31 B
helipad2.tga	769.0 kB
icon_rega.tga	13.0 kB
light1-lightmask.texture.txt	52 B
light1.tga	12.5 kB
lightmask.bmp	5.1 kB
night.im	55.3 kB
pilot_rega.texture.txt	33 B
pilot_rega.tga	193.0 kB
preview.jpg	15.4 kB
warningbell.wav	45.6 kB
Общий объём файлов:	1.6 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:60238:38650:1>	industry	Airport Rega Lausanne	2.8	16.07.2020 11:32:26	573.7 kB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-3:10060>	#-3	product	Passengers	2.9	12.06.2020 2:08:26	10.3 MB
<kuid:-3:10164>	#-3	texture	IndustryObjectIcon	0	12.06.2020 19:16:45	2.0 kB
<kuid2:60238:37038:4>	#60238	track	Track Green Invisible in Driver	3.5	23.01.2024 23:01:15	21.5 kB
<kuid2:60238:1000021:2>	#60238	mesh	Aircraft Flasher Red Mesh	2.6	12.06.2020 19:19:59	8.0 kB
<kuid2:60238:1000023:2>	#60238	mesh	Aircraft Flasher Green Mesh	2.6	12.06.2020 19:17:37	7.7 kB
Всего связей: 5, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:666859:101405>	#666859	map	Schweiz-Switzerland-Suisse-Viadukt-2024-06-16	4.9	18.06.2024 10:03:26	202.5 MB