<kuid2:60238:38581:2> Airport Runway Bitumen Surface

Тип: Индустрия
Опубликовано: 21.06.2020 13:56:33
Скачиваний: 100
Размер: 467.6 kB

Скачать

A main runway for aircraft, with separate takeoff and landing alignments, all operations are in the same direction. This model has a bitumen finish to the runway surface. It has four attached tracks in different colours, with appropriate gradients:

a normal takeoff in green,
a short takeoff in purple,
a landing track in blue and
a touch and go track in red.

Stopping points for aircraft are provided for navigating under AI driving:

two taxiway stops before entering the runway awaiting clearance,
takeoff stops on the start of the runway for engine runup,
a landing stop on the other end of the runway landing track, and
a taxiway off stop on leaving the runway.

In Surveyor or Driver, click on the placed runway model to view a HTML page explaining the track arrangements.

You will need to place speed limit signs to control the speed of aircraft, my aircraft are designed to tilt (bank on curved track) above 36 or 45 kph, depending on the type of aircraft, and on sharp curves above these speeds the wings will dig into the ground. You also need track signalling and speed signs for operation under AI.

config.txt:

kuid                                    <kuid2:60238:38581:2>
username                                "Airport Runway Bitumen Surface"
kind                                    "industry"
light                                   1
nightmode                               "lamp"
region                                  "Australia"
type                                    "Industrial"
icon-texture                            "icon_runway.tga"
script                                  "runway7"
class                                   "Runway"
passenger-height                        -1.204
category-region-0                       "AU"
category-era-0                          "1990s"
category-era-1                          "2000s"
category-class                          "BIN"
trainz-build                            2.6
height-range                            -20,30
mesh-table
{
  default
  {
    mesh                                "runway.im"
    auto-create                         1
  }
  default-night
  {
    mesh                                "night.im"
    night-mesh-base                     "default"
  }
}
attached-track
{
  taxiway_on_stop
  {
    track                               <kuid2:60238:37038:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track0a"
      1                                 "a.track0b"
      2                                 "a.track0c"
    }
  }
  taxiway_on
  {
    track                               <kuid2:60238:37038:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track0c"
      1                                 "a.track1a"
      2                                 "a.track1b"
      3                                 "a.track1c"
      4                                 "a.track2a"
    }
  }
  takeoff_stop
  {
    track                               <kuid2:60238:37038:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track2a"
      1                                 "a.track2b"
    }
  }
  takeoff
  {
    track                               <kuid2:60238:37038:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track2b"
      1                                 "a.track3a"
      2                                 "a.track3b"
      3                                 "a.track3c"
      4                                 "a.track3d"
      5                                 "a.track3e"
      6                                 "a.track3f"
      7                                 "a.track3g"
      8                                 "a.track3h"
    }
  }
  landing
  {
    track                               <kuid2:60238:37037:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track4a"
      1                                 "a.track4b"
      2                                 "a.track4c"
      3                                 "a.track4d"
      4                                 "a.track4e"
      5                                 "a.track4f"
      6                                 "a.track4g"
      7                                 "a.track4h"
    }
  }
  landing_stop
  {
    track                               <kuid2:60238:37037:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track4h"
      1                                 "a.track5a"
      2                                 "a.track5b"
    }
  }
  taxiway_off
  {
    track                               <kuid2:60238:37037:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track5b"
      1                                 "a.track6a"
      2                                 "a.track6b"
      3                                 "a.track6c"
      4                                 "a.track7a"
    }
  }
  taxiway_off_stop
  {
    track                               <kuid2:60238:37037:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track7a"
      1                                 "a.track7c"
    }
  }
  touch_and_go
  {
    track                               <kuid2:60238:37039:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track8a"
      1                                 "a.track8b"
      2                                 "a.track8c"
      3                                 "a.track8d"
      4                                 "a.track8e"
      5                                 "a.track8f"
      6                                 "a.track8g"
      7                                 "a.track8h"
      8                                 "a.track8i"
    }
  }
  short_taxiway_on_stop
  {
    track                               <kuid2:171456:37300:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track9a"
      1                                 "a.track9b"
      2                                 "a.track9c"
    }
  }
  short_taxiway_on
  {
    track                               <kuid2:171456:37300:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track9c"
      1                                 "a.track11a"
      2                                 "a.track11b"
      3                                 "a.track11c"
      4                                 "a.track10a"
    }
  }
  short_takeoff_stop
  {
    track                               <kuid2:171456:37300:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track10a"
      1                                 "a.track10b"
    }
  }
  short_takeoff
  {
    track                               <kuid2:171456:37300:1>
    useadjoiningtracktype               0
    vertices
    {
      0                                 "a.track10b"
      1                                 "a.track12a"
      2                                 "a.track12b"
      3                                 "a.track12c"
      4                                 "a.track12d"
      5                                 "a.track12e"
      6                                 "a.track12f"
    }
  }
}
attached-trigger
{
  trigger_taxiway_on_stop
  {
    att                                 "a.trig0"
    radius                              15
    track                               "taxiway_on_stop"
  }
  trigger_takeoff_stop
  {
    att                                 "a.trig1"
    radius                              15
    track                               "takeoff_stop"
  }
  trigger_landing_stop
  {
    att                                 "a.trig2"
    radius                              15
    track                               "landing_stop"
  }
  trigger_taxiway_off_stop
  {
    att                                 "a.trig3"
    radius                              15
    track                               "taxiway_off_stop"
  }
  trigger_short_taxiway_on_stop
  {
    att                                 "a.trig4"
    radius                              15
    track                               "short_taxiway_on_stop"
  }
  trigger_short_takeoff_stop
  {
    att                                 "a.trig5"
    radius                              15
    track                               "short_takeoff_stop"
  }
}
string-table
{
  parking1                              "Taxiway On Stop"
  parking2                              "Takeoff Stop"
  parking3                              "Landing Stop"
  parking4                              "Taxiway Off Stop"
  parking5                              "Short Taxiway On Stop"
  parking6                              "Short Takeoff Stop"
}
icon0                                   <kuid:-3:10164>
thumbnails
{
  0
  {
    image                               "preview.jpg"
    width                               240
    height                              180
  }
  1
  {
    image                               "icon_runway.tga"
    width                               64
    height                              64
  }
}
description                             "A main runway for aircraft, with separate takeoff and landing alignments, all operations are in the same direction. This model has a bitumen finish to the runway surface. It has four attached tracks in different colours, with appropriate gradients:
 
a normal takeoff in green,
a short takeoff in purple, 
a landing track in blue and 
a touch and go track in red. 

Stopping points for aircraft are provided for navigating under AI driving:

two taxiway stops before entering the runway awaiting clearance, 
takeoff stops on the start of the runway for engine runup, 
a landing stop on the other end of the runway landing track, and 
a taxiway off stop on leaving the runway. 

In Surveyor or Driver, click on the placed runway model to view a HTML page explaining the track arrangements. 

You will need to place speed limit signs to control the speed of aircraft, my aircraft are designed to tilt (bank on curved track) above 36 or 45 kph, depending on the type of aircraft, and on sharp curves above these speeds the wings will dig into the ground. You also need track signalling and speed signs for operation under AI."
license                                 "This file is released free of charge for you to use. You may not host on a webserver or redistribute the model without my permission, and if permitted, only as long as you do not do so for profit. This licence file must be included with any permitted redistribution. Copyright of the model and original textures remains with Ian Manion (Vulcan)"
author                                  "Ian Manion (Vulcan)"
organisation                            "Ianz Trainz"
contact-website                         "http://www.ianztrainz.com.au/index.html"
asset-filename                          "airport1"
kuid-table
{
  track0                                <kuid2:60238:37038:1>
  track1                                <kuid2:60238:37039:1>
  track2                                <kuid2:60238:37037:1>
  track3                                <kuid2:171456:37300:1>
  0                                     <kuid:-3:10164>
  passenger                             <kuid:-3:10060>
}

Файлы:

icon_display1.tga	449.3 kB
icon_display2.tga	472.6 kB
icon_runway.tga	13.0 kB
lights.texture.txt	29 B
lights.tga	49.0 kB
lines_bitumen.texture.txt	36 B
lines_bitumen.tga	769.0 kB
night.im	81.8 kB
operations.html	418 B
preview.jpg	17.1 kB
runway.im	34.4 kB
runway5.gs	2.4 kB
runway6.gs	1.9 kB
runway7.gs	2.7 kB
Общий объём файлов:	1.8 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:60238:38581:2>	industry	Airport Runway Bitumen Surface	2.6	21.06.2020 13:56:33	467.6 kB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-3:10060>	#-3	product	Passengers	2.9	12.06.2020 2:08:26	10.3 MB
<kuid:-3:10164>	#-3	texture	IndustryObjectIcon	0	12.06.2020 19:16:45	2.0 kB
<kuid2:60238:37037:3>	#60238	track	Track Blue Invisible in Driver	3.5	17.05.2020 16:33:29	12.8 kB
<kuid2:60238:37038:4>	#60238	track	Track Green Invisible in Driver	3.5	23.01.2024 23:01:15	21.5 kB
<kuid2:60238:37039:4>	#60238	track	Track Red Invisible in Driver	3.5	26.01.2024 21:47:31	21.4 kB
<kuid2:171456:37300:1>	#171456	track	Track Purple Invisible Driver	2.5	20.06.2020 23:08:20	4.5 kB
Всего связей: 6, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет