<kuid2:60238:8093:1> Naval Aircraft Factory N3N-1 Floatplane Startup

Тип: traincar
Опубликовано: 12.01.2021 18:54:29
Скачиваний: 35
Размер: 2.2 MB

Скачать

A flyable Naval Aircraft Factory N3N-1 Floatplane aircraft, a light aircraft that was built in 1936. The aircraft tilts and banks realistically. The speed for tilting may be altered in the string table above - speeds are in kph. Note landing speed above is a fraction of full speed, eg 0.45, not kph.
It does not have an operating interior, but does have various exterior views based on an invisible interior, use the [ and ] keys from the interior view. It does load passengers at suitable airports.Initially the engines are stopped, Use the B key to start or stop engines. On startup, the pilot tests the rudder and tail elevators.
The aircraft has a number of animations that can be operated by keyboard keys, or the Aircraft Action Trigger, kuid3:76656:24060:1, when placed on track and set to the correct number:
- to start engines, press the B key or use trigger setting 2. An engine start rule is also available for AI.
- issue water srray from the center float when landing or taking off, use the H key or trigger setting 4.
- to flare the aircraft for landing, trigger setting 7 or V key.
- come to a gradual stop on landing, trigger setting 9.
- set speed to 40% of maximum speed, for landing approach, trigger setting 14.

config.txt:

kuid                                    <kuid2:60238:8093:1>
kind                                    "traincar"
nightmode                               "lamp"
mass                                    10000
engine                                  1
fonts                                   0
bogeys
{
  0
  {
    reversed                            0
    bogey                               <kuid:-10:149>
  }
  1
  {
    reversed                            0
    bogey                               <kuid:-10:149>
  }
}
enginespec                              <kuid2:60238:51035:1>
enginesound                             <kuid2:60238:53049:1>
hornsound                               <kuid2:60238:54027:1>
interior                                <kuid2:60238:55015:1>
disable-extra-track-sounds              1
script                                  "aircraft245"
class                                   "aircraft"
category-keyword                        "aircraft;n3n;startup"
soundscript
{
  engine
  {
    trigger                             "engine"
    attachment                          "a.sound0"
    nostartdelay                        0
    repeat-delay                        -0,-0
    distance                            20,170
    sound
    {
      0                                 "engine.wav"
    }
  }
}
mesh-table
{
  default
  {
    mesh                                "body/base.im"
    anim                                "body/base.kin"
    auto-create                         1
  }
  flashers
  {
    mesh                                "body/flashers.im"
    att                                 "a.origin"
    att-parent                          "default"
    effects
    {
      flasher0
      {
        kind                            "attachment"
        att                             "a.marker0"
        default-mesh                    <kuid2:60238:1000021:1>
      }
      flasher1
      {
        kind                            "attachment"
        att                             "a.marker1"
        default-mesh                    <kuid2:60238:1000023:1>
      }
      flasher2
      {
        kind                            "attachment"
        att                             "a.marker2"
        default-mesh                    <kuid2:60238:1000021:1>
      }
    }
  }
  body
  {
    mesh                                "body/body.im"
    auto-create                         1
    att                                 "a.origin"
    att-parent                          "default"
  }
  engine9
  {
    mesh                                "body/engine9.im"
    auto-create                         1
    att                                 "a.origin"
    att-parent                          "default"
  }
  engine7
  {
    mesh                                "body/engine7.im"
    auto-create                         0
    att                                 "a.origin"
    att-parent                          "default"
  }
  exhaust9
  {
    mesh                                "body/exhaust9.im"
    auto-create                         1
    att                                 "a.origin"
    att-parent                          "default"
  }
  exhaust7
  {
    mesh                                "body/exhaust7.im"
    auto-create                         0
    att                                 "a.origin"
    att-parent                          "default"
  }
  pilot_front
  {
    mesh-asset                          <kuid2:60238:60069:1>
    mesh                                "pilot_202.im"
    auto-create                         0
    att                                 "a.pilot_front"
    att-parent                          "body"
  }
  pilot_rear
  {
    mesh-asset                          <kuid2:60238:60069:1>
    mesh                                "pilot_202.im"
    auto-create                         0
    att                                 "a.pilot_rear"
    att-parent                          "body"
  }
  prop0
  {
    mesh                                "body/prop2.im"
    anim                                "body/prop2.kin"
    auto-create                         0
    att                                 "a.prop0"
    att-parent                          "body"
  }
  prop1
  {
    mesh                                "body/propdisk.im"
    anim                                "body/propdisk.kin"
    animation-loop-speed                "0.3"
    att                                 "a.prop0"
    att-parent                          "body"
  }
  rudder
  {
    mesh                                "body/rudder.im"
    anim                                "body/rudder.kin"
    auto-create                         1
    att                                 "a.origin"
    att-parent                          "default"
  }
  elevators
  {
    mesh                                "body/elevator.im"
    anim                                "body/elevator.kin"
    auto-create                         1
    att                                 "a.origin"
    att-parent                          "default"
  }
  flaps
  {
    mesh                                "body/flaps.im"
    anim                                "body/flaps.kin"
    auto-create                         1
    att                                 "a.origin"
    att-parent                          "default"
  }
  shadow
  {
    mesh                                "shadow/shadow_inv.im"
    att-parent                          "default"
  }
}
smoke0
{
  attachment                            "a.float_smoke0"
  mode                                  "time"
  color                                 94,94,94
  start                                 0
  rate                                  10
  velocity                              6
  lifetime                              1
  minsize                               0.2
  maxsize                               1.5
  accel                                 0.1,0.1,0.25
  inherit-velocity                      1
  enabled                               0
}
smoke1
{
  attachment                            "a.float_smoke1"
  mode                                  "time"
  color                                 94,94,94
  start                                 0
  rate                                  10
  velocity                              6
  lifetime                              1
  minsize                               0.2
  maxsize                               1.5
  accel                                 0.1,0.1,0.25
  inherit-velocity                      1
  enabled                               0
}
smoke2
{
  attachment                            "a.float_smoke2"
  mode                                  "time"
  color                                 94,94,94
  start                                 0
  rate                                  10
  velocity                              6
  lifetime                              1
  minsize                               0.2
  maxsize                               1.5
  accel                                 0.1,0.1,0.25
  inherit-velocity                      1
  enabled                               0
}
smoke3
{
  attachment                            "a.smoke0"
  mode                                  "time"
  color                                 160,178,194,255
  accel                                 0,0,0
  start                                 0
  period                                86400
  rate                                  25
  velocity                              15
  lifetime                              0.5
  minsize                               0.25
  maxsize                               0.5
  enabled                               0
}
username                                "Naval Aircraft Factory N3N-1 Floatplane Startup"
trainz-build                            3.5
category-class                          "AL"
light_color                             255,255,255
ditch_color                             255,200,200
string-table
{
  tilt-speed                            "50"
  takeoff-speed                         "120"
  tail-lift-speed                       "50"
  landing-speed                         "0.5"
  flap-retraction                       "80"
}
queues
{
  passengers
  {
    size                                1
    initial-count                       1
    passenger-queue                     1
    product-kuid                        <kuid:-3:10060>
  }
}
thumbnails
{
  0
  {
    image                               "preview.jpg"
    width                               240
    height                              180
  }
}
description                             "A flyable Naval Aircraft Factory N3N-1 Floatplane aircraft, a light aircraft that was built in 1936. The aircraft tilts and banks realistically. The speed for tilting may be altered in the string table above - speeds are in kph. Note landing speed above is a fraction of full speed, eg 0.45, not kph. 
It does not have an operating interior, but does have various exterior views based on an invisible interior, use the [ and ] keys from the interior view. It does load passengers at suitable airports.Initially the engines are stopped, Use the B key to start or stop engines. On startup, the pilot tests the rudder and tail elevators.
The aircraft has a number of animations that can be operated by keyboard keys, or the Aircraft Action Trigger, kuid3:76656:24060:1, when placed on track and set to the correct number:
- to start engines, press the B key or use trigger setting 2. An engine start rule is also available for AI.
- issue water srray from the center float when landing or taking off, use the H key or trigger setting 4. 
- to flare the aircraft for landing, trigger setting 7 or V key.
- come to a gradual stop on landing, trigger setting 9.
- set speed to 40% of maximum speed, for landing approach, trigger setting 14."
author                                  "Ian Manion (Vulcan)"
organisation                            "Ianz Trainz"
contact-website                         "http://www.ianztrainz.com/index.html"
license                                 "This file is released free of charge for you to use. You may not host on a webserver or redistribute the model without my permission, and if permitted, only as long as you do not do so for profit. This licence file must be included with any permitted redistribution. Copyright of the model and original textures remains with Ian Manion (Vulcan)."
kuid-table
{
  enginespec                            <kuid2:60238:51035:1>
  hornsound                             <kuid2:60238:54027:1>
  interior                              <kuid2:60238:55015:1>
  bogey                                 <kuid:-10:149>
  enginesound                           <kuid2:60238:53049:1>
  corona_green                          <kuid2:60238:1000023:1>
  corona_red                            <kuid2:60238:1000021:1>
  passenger                             <kuid:-3:10060>
  pilots_library                        <kuid2:60238:60069:1>
}

Файлы:

aircraft245.gs	13.1 kB
body
body / base.im	1.5 kB
body / body3.texture.txt	28 B
body / elevator.im	4.3 kB
body / elevator.kin	7.2 kB
body / base.kin	10.8 kB
body / engine7.im	82.9 kB
body / env_metal.texture.txt	32 B
body / env_metal.bmp	12.1 kB
body / engine9.im	106.5 kB
body / exhaust7.im	44.4 kB
body / flaps.im	7.9 kB
body / body.im	170.5 kB
body / glass.texture.txt	28 B
body / flashers.im	1.5 kB
body / glass.tga	4.0 kB
body / pilot_front.im	28.8 kB
body / exhaust9.im	51.7 kB
body / pilot_rear.im	28.8 kB
body / flaps.kin	15.6 kB
body / prop2.im	10.7 kB
body / prop2_white-prop2.texture.txt	51 B
body / prop2.kin	5.8 kB
body / rudder.im	7.6 kB
body / rudder.kin	7.2 kB
body / shadowblack.texture.txt	34 B
body / propdisk.im	1.4 kB
body / shadowblack.tga	1.8 kB
body / propdisk.kin	7.2 kB
body / prop_hawkeye.bmp	192.1 kB
body / prop2_white.tga	193.0 kB
body / prop2.bmp	192.1 kB
body / body3.tga	3.0 MB
shadow
shadow / shadow_inv.im	1.3 kB
shadow / shadowblack.texture.txt	34 B
shadow / shadowblack.tga	1.8 kB
shadow / shadow.im	12.1 kB
preview.jpg	22.4 kB
stop.wav	110.4 kB
tyres.wav	57.0 kB
engine.wav	336.8 kB
start.wav	698.0 kB
Общий объём файлов:	5.4 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:60238:8093:1>	traincar	Naval Aircraft Factory N3N-1 Floatplane Startup	3.5	12.01.2021 18:54:29	2.2 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-10:149>	#-10	bogey	Тележка_невидимая	0	18.04.2023 0:03:42	1.4 kB
<kuid:-3:10060>	#-3	product	Passengers	2.9	12.06.2020 2:08:26	10.3 MB
<kuid2:60238:51035:1>	#60238	engine	Piper Cub Engine config	3.5	12.06.2020 19:16:41	15.4 kB
<kuid2:60238:53049:1>	#60238	enginesound	Piper Cub Engine Sound Startup	3.5	12.06.2020 19:25:14	5.1 MB
<kuid2:60238:54027:1>	#60238	hornsound	Silent Horn Sound for Helicopters	2.7	12.06.2020 19:16:45	8.1 kB
<kuid2:60238:55015:3>	#60238	interior	Canal Boat 1 Interior	2.4	8.01.2018 22:54:43	13.5 kB
<kuid2:60238:60069:1>	#60238	mesh	Figure Pilots Military WW2 Mesh Library	3.5	24.06.2020 14:16:07	2.5 MB
<kuid2:60238:1000021:2>	#60238	mesh	Aircraft Flasher Red Mesh	2.6	12.06.2020 19:19:59	8.0 kB
<kuid2:60238:1000023:2>	#60238	mesh	Aircraft Flasher Green Mesh	2.6	12.06.2020 19:17:37	7.7 kB
Всего связей: 9, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет