<kuid:41009:1046> SCS2006

Тип: Правило
Опубликовано: 14.06.2020 11:51:28
Скачиваний: 196
Размер: 1.4 MB

Скачать

A complete scenario creation system that runs as a rule. Contains over 100 commands to help you create your masterpiece.
Will only work in Trainz 2006 SP1 and above.

config.txt:

trainz-build                            2.5
category-class                          "YR"
category-region                         "00"
category-era                            "2000s"
username                                "SCS2006"
kind                                    "behavior"
author                                  "Mike Carter"
license                                 "Freeware for non commercial use.
No part of this asset may be copied without permission from the author.
This asset may only be distributed through the Auran download station."
class                                   "SCS2006"
script                                  "scs2006.gs"
kuid                                    <kuid:41009:1046>
description                             "A complete scenario creation system that runs as a rule. Contains over 100 commands to help you create your masterpiece.
Will only work in Trainz 2006 SP1 and above."
contact-website                         "Please see the SCS2006 Public Support forum at http://www.trainzproroutes.org/forum/ for help and advice."
thumbnails
{
  0
  {
    image                               "SCS2006.jpg"
    width                               240
    height                              180
  }
  1
  {
    image                               "tpr.tga"
    width                               32
    height                              32
  }
}
string-table
{
  description                           "Rule for creating and running SCS scenarios"
  html-description                      "Rule for creating and running SCS scenarios"
  str-session                           "The name under which this session is saved."
  strgotonotfound                       "Unable to find label '$0' for goto command"
  strifnotfound                         "Unable to find If End"
  html-session-name                     "Session Name."
  html-description-session              "Please enter the name by which this session is saved. i.e. The name you will use to save this session when you exit from Surveyor. Failure to enter this correctly will cause problems in your scenario."
  html-description-scan                 "Scan track."
  html-description-scanwarning          "Scanning can take several minutes. If the route contains industries, a large number of junctions and very few signals, the track scan may take a very long time. During a scan the world time will cycle through 24 hours approximately every 10 seconds. The scan is complete when the time stops at midnight."
  html-description-dupes                "Check for Duplicates."
  str-property-scan                     "Scanning is required for the path commands to work correctly."
  html-edit-trains                      "Edit list of trains to be added at trackmarks."
  html-edit-random                      "Edit list of trains to be used as random consist seed."
  html-edit-trains-surveyor             "Edit list of trains added in Surveyor."
  html-edit-trains-decoupled            "Edit names of consists to be decoupled or added by the random consist command."
  html-edit-variables                   "Edit list of variables for use in this scenario."
  html-edit-scenario-commands           "Edit scenario threads (e.g. weather, add train etc)."
  html-edit-train-commands              "Edit commands for each train."
  html-train-add                        "a train to this scenario."
  html-random-add                       "a random consist seed."
  html-var-add                          "a variable to this scenario."
  html-vartype                          "Select a variable type"
  html-varname                          "Enter a name for the variable"
  html-train-del                        "Delete this train"
  html-add-scenario-command             "a command"
  str-add-scenario-command              "Command name"
  html-scenario-thread-add              "a new scenario thread"
  html-scenario-thread                  "Scenario Thread"
  html-clipboard-view                   "Clipboard"
  html-clipboard-view-empty             "Clipboard is empty"
  html-train-thread                     "Train thread"
  html-add-train-command                "a command"
  html-train-thread-add                 "a new train thread"
  html-confirm-delete                   "Are sure you want to DELETE"
  html-param-edit                       "Enter the required parameter"
  html-train-user-name                  "Train Name"
  html-random-user-name                 "Random consist Name"
  html-train-name                       "Consist Name"
  html-random-name                      "Random consist Name"
  html-print                            "Prints the scenario to the Jetlog"
  html-scan-start                       "Track Scan"
  html-scan-end                         "Track Scan Completed"
  html-print-log                        "Print scenario to jetlog"
  html-print-end                        "Scenario printed to jetlog"
  html-dependencies-start               "Print dependencies to jetlog"
  html-dependencies-end                 "Dependencies printed to jetlog. The dependencies are automatically added to the config.txt file each time the scenario is saved."
  html-edit-instructions                "Edit the list of pages for user instructions."
  html-edit-browser                     "Edit the list of pages for the browser."
  html-inst-add                         "a HTML instruction page."
  html-browser-add                      "a HTML page."
  html-choice-add                       "a user selection."
  html-choice-add1                      "Text to display"
  html-inst-page-add                    "Page without the HTML extn."
  html-instasset                        "Asset containing Instructions."
  html-customasset                      "Asset containing splash Screen."
  html-signallib                        "Asset containing signalling library."
  html-customfile                       "Splash Screen file without extn."
  html-userinfo                         "Splash Screen Details."
  html-tsoasset                         "Name of TSO asset."
  html-tsofile                          "Name of TSO file."
  html-browsertop                       "Browser Top."
  html-browserleft                      "Browser Left."
  html-browserheight                    "Browser Height."
  html-browserwidth                     "Browser Width."
  html-browsermaxpage                   "Maximum Page Number"
  html-help                             "If you downloaded SCS2006 from the Auran dls, you will also have downloaded the Help files and the Command Reference Files. These files are standard HTML files that can be viewed with any web browser. These instructions will enable you to copy the files to any location on your PC from where you will be able to view them at any time.<br><br>Open Trainz Content Manager Plus (CMP).<br><br>In CMP, click on the ‘Installed’ tab and wait for the items to be displayed.<br><br>Locate ‘Kens wonderful help system’ in the name column and right click on it to open a menu.<br><br>Move the mouse over the ‘Edit’ item and a second menu will open. In this menu, click on ‘Edit in Explorer’.<br><br>This should open Windows Explorer to view the Help files. Press ctrl A to highlight all of the files and then press ctrl C to copy them.<br><br>Now find a suitable location on your hard drive and create a new folder for the files. Open this new folder and press ctrl V. The help files will be copied into the new folder.<br><br>To view the files, double click on 'Kens Help System.html'<br><br>Repeat the above for ‘Kens Command Reference’ files using 'Kens Command Reference' in place of  ‘Kens wonderful help system’"
  html-montrain                         "Train to Monitor"
  html-montolerance                     "Tolerance"
  html-monmessage                       "Message"
  ttcheckdb                             "Check and/or edit the track database"
  html-checkdb                          "View the track database"
  html-juncdbtitle                      "Track Database"
  html-juncdbedittitle                  "Edit Junction Connection"
  html-connects                         "Connects to"
  html-filter                           "Junction Filter ="
  html-setfilter                        "Enter filter. Blank for none"
  html-dbjuncname                       "Select a Junction"
  html-support                          "Please visit http://www.trainzproroutes.org/forum/ for support"
  str-noscan                            "*** WARNING. Track has NOT been scanned***"
  str-scanned                           "Track has been scanned at least once but will need to be re-scanned if the track is edited in Surveyor."
  str-scanning                          "A track scan is in progress. Please do not exit from the editor during the scan."
  str-scan-not-finished                 "Your last track scan did not complete. Please perform another track scan before trying to run the scenario."
  str-dupe-objects                      "Check For Duplicate Trackside Object Names"
  str-dupes                             "Check for duplicate trackside objects on the route"
  str-dupe-scan                         "This will scan the route for duplicate trackside objects that could cause problems. Scanning may take a few minutes on a large route. Trainz will be locked up during the scan."
  str-duplicate                         "THE FOLLOWING DUPLICATES HAVE BEEN FOUND<br><br>"
  str-no-duplicate                      "NO DUPLICATES FOUND<br><br>"
  str-dup-junc                          "<br>Duplicate Junctions<br>"
  str-dup-sig                           "<br>Duplicate Signals<br>"
  str-dup-tm                            "<br>Duplicate TrackMarks<br>"
  str-dup-tr                            "<br>Duplicate Triggers<br>"
  str-dup-ind                           "<br>Duplicate Industries/Stations<br>"
  str-dup-junc-sig                      "<br>Junction Names Duplicated in Signal Names<br>"
  str-dup-junc-tm                       "<br>Junction Names Duplicated in Trackmark Names<br>"
  str-dup-junc-tr                       "<br>Junction Names Duplicated in Trigger Names<br>"
  str-dup-junc-ind                      "<br>Junction Names Duplicated in Industry/Station Names<br>"
  str-dup-sig-tm                        "<br>Signal Names Duplicated in Trackmark Names<br>"
  str-dup-sig-tr                        "<br>Signal Names Duplicated in Trigger Names<br>"
  str-dup-sig-ind                       "<br>Signal Names Duplicated in Industry/Station Names<br>"
  str-dup-tm-tr                         "<br>Trackmark Names Duplicated in Trigger Names<br>"
  str-dup-tm-ind                        "<br>Trackmark Names Duplicated in Industry/Station Names<br>"
  str-dup-tr-ind                        "<br>Trigger Names Duplicated in Industry/Station Names<br>"
  str-debug                             "This will cause commands to display in the objective window as they execute."
  str-cameraswitch                      "This will allow the player to switch the camera around the available consists."
  str-score                             "This will cause the user's score to display in the HUD."
  ttsignalling                          "Choose signalls controled by Trainz, SCS2006 or a user created library"
  ttsignallingscs                       "Signals controlled by SCS"
  ttsignallingauran                     "Signals controlled by Trainz"
  ttsignallingext                       "Signals controlled by user library"
  str-selectcontrol                     "This will cause the select DCC or Cab browser to display as the scenario starts."
  str-instructions                      "This will cause the 'i' button to show in the HUD allowing the user to view the scenario instructions."
  str-nobrowserhtmlasset                "HTML Asset name not entered for User Browser command."
  str-notrains                          "No trains with locos available."
  str-nocoupleconsist                   "No consist specified as the couple to consist in a Couple command."
  str-norandconsist                     "No random consist seed specified in an Add Random Consist command."
  str-missingconsist                    "A consist does not exist in a Couple command."
  str-missingconsisttm                  "A consist does not exist in a drive to trackmark command."
  str-missingconsisttr                  "A consist does not exist in a drive to trigger command."
  str-missingconsistind                 "A consist does not exist in a load/unload at industry command."
  str-unseenconsist                     "There does not appear to be a path set to the consist."
  str-unseentm                          "There does not appear to be a path set to the trackmark."
  str-unseentr                          "There does not appear to be a path set to the trigger."
  str-notrigger                         "No trigger specified in TPR Stop At Trigger command."
  str-notrackmark                       "No trackmark specified in TPR Stop At Trackmark command."
  str-coupleproblem                     "Problem rebuilding consists after couple up."
  str-trackmarks                        "You must have least two trackmarks or two signals on the route to be able to perform a track scan."
  str-pw-protected                      "This scenario is password protected. <br><br>Please click on the password link and enter the password to continue editing the scenario."
  str-pw-notmatch                       "The password and the confirmation password do not match, please re-enter them."
  str-enter-pw                          "Enter password"
  str-confirm-pw                        "Confirm password"
  str-scenario-protected                "Password protect this scenario."
  str-protect-scenario                  "If the scenario is protected, it cannot be edited until the correct password has been entered."
  str-pw-enter                          "Please click on the Enter password link to enter your password. You will then be given a link to confirm the password. Please click on that link and re-enter your password."
  str-wrongtrainz                       "SCS2006 can only be used with Trainz 2006."
  str-wrongtrainz-scenario              "This scenario can only be used with Trainz 2006 SP1 or higher."
  str-help                              "How to get help."
  str-couple-rebuild-problem            "A problem occurred when trying to calculate the train heading after a couple up."
  str-badtso                            "Trainz is unable to load the TSO file for this scenario."
  str-add                               "Add"
  str-repeat                            "Repeat"
  str-paste                             "Append"
  str-copy                              "Copy"
  str-go                                "Perform Copy"
  str-del-go                            "Perform DELETE"
  str-empty-clipboard                   "There are no commands on the clipboard."
  str-thread-copied                     "The thread has been copied to the clipboard."
  str-failed-to-restore                 "Failed to restore consist"
  str-nocamtrain                        "Cannot find the train specified in a Set Camera To Train command"
  str-nocamjunc                         "Cannot find the junction specified in a Set Camera To Junction command"
  str-overspeedmessage                  "You are exceeding the speed limit. Slow down or face the consequences"
  str-nofrontjunc                       "Attempt to run Add Train command with no front junction"
  str-nomonitortrain                    "You have not specified a train for the player train monitor"
  str-missingtrain                      "You have not selected a train in a command that requires a train"
  str-missingdep                        "The following train vehicles are required by this scenario but are not installed on this computer"
  str-pleasechoose                      "Please select one of the following options"
  str-viewclipboard                     "View Clipboard"
  str-numclips1                         "There are"
  str-numclips2                         "commands on the clipboard"
  str-badsiglib                         "Cannot find the signalling library"
  ttmonplayertrain                      "Select the train to monitor"
  ttmontolerance                        "Number of MPH or KPH over the speed limit before an overspeed is recorded"
  ttmonspeedmsg                         "Warning message to display when the train is speeding"
  html-paste-train-command              "from clipboard"
  html-paste-train-thread               "thread to clipboard"
  str-repeat-scenario-command           "Number of commands to repeat"
  html-repeat-train-command             "last n commands to clipboard."
  str-thread-paste                      "Thread to copy from"
  ttfull                                "Show this thread in a full page"
  ttprint                               "Prints the scenario to the Jetlog. You must close Trainz before attempting to view the Jetlog."
  ttdependencies                        "Prints the dependencies to the Jetlog. You must close Trainz before attempting to view the Jetlog."
  tt-scenario-thread-add                "A scenario thread contains general commands such as weather, create train etc. At least one scenario thread is required."
  ttseconds                             "Number of seconds to wait"
  ttseconds1                            "Seconds part of the time"
  ttminutes                             "Minutes part of the time"
  tthours                               "Hours part of the time"
  tttrain                               "Train name"
  ttjunction                            "Junction name"
  ttwaitfor                             "Wait for the entered number of seconds"
  ttwaituntil                           "Wait until the entered time"
  tttrainclearedjunction                "Wait until the selected train exits the selected junction"
  ttjunctionmanual                      "Allow player control of the selected junction (this may cause problems with your commands). Player control is disabled by default."
  tttraincontrol                        "Select a control type for the selected train"
  ttobjective                           "Enter text and choose an icon to be displayed in the objective window"
  ttjunctionsetdirection                "Set the selected junction to the selected direction (this may cause problems with permits)"
  ttsignalsetstate                      "Set the selected signal to the selected state"
  ttsignalsetstateex                    "Set the selected signal to the selected extended state"
  ttsignalsetlight                      "Light the selected signal or turn it off"
  ttannounce                            "Enter text for an announcement to be waited for with the On Announcement command."
  ttunannounce                          "Delete a previously entered announcement."
  ttunannouncetext                      "Enter text for the announcement. This text must exactly match the text in the Announce command"
  ttcontrol                             "Control type"
  ttobjectivetext                       "Text to be displayed in the objective window"
  ttobjectiveicon                       "Objective icon"
  ttjunctiondir                         "Direction to set the junction"
  ttsignal                              "Select a signal name"
  ttsigstate                            "Select a state for this signal"
  ttsigreason                           "Enter text to be displayed when the player hovers the mouse over this signal"
  ttsiglight                            "Choose whether or not to light this signal"
  ttannouncetext                        "Enter text for the announcement. This text is not seen by the player so keep it short"
  ttdeletetrain                         "Delete this train and its schedule"
  ttdeletecommand                       "Delete this command"
  tttrainname                           "Click here to select a different train"
  tttrainnamer                          "Click here to select a different train"
  ttexpandlist                          "Expand list"
  ttcloselist                           "Close list"
  ttexpandlib                           "Expand library call"
  ttcollapselib                         "Collapse library call"
  ttexpandrand                          "Expand random consist command"
  ttcollapserand                        "Collapse random consist command"
  ttcloselib                            "Close library call"
  ttthreaddel                           "Delete this thread and all its commands"
  ttcommanddel                          "Delete this command"
  ttinsert                              "Insert a command before this one"
  ttonannouncement                      "This command will make the thread wait for the selected announcement"
  ttonannouncetext                      "Announcement text to wait for"
  ttonannouncebool                      "Clear this message from the list of announcements or leave it for another On Announcement command"
  ttdccthrottle                         "Set the DCC throttle"
  ttdccthrottlevalue                    "Set the value between 0.0 and 1.0"
  ttaddtrain                            "Create the selected train for use in the scenario"
  ttaddtraintext                        "The train to be created"
  ttaddtraintrackmark                   "The trackmark where the train is to be created"
  ttaddtraindirection                   "Direction the train is to face. Forward is the way the trackmark is pointing"
  tttrainusername                       "User Name. The name by which this train is known in the scenario."
  tttrainusernamer                      "Random Name. The name by which this random consist seed is known in the scenario."
  ttvartype                             "Variable type. The type of variable to be stored."
  ttreverseai                           "Stop an AI controlled train and reverse it."
  ttreversetpr                          "Change the running direction of a TPR autopilot train.."
  ttreverseplayer                       "Tell the player to stop his train and reverse"
  ttreverseplayer1                      "Tell the player to reverse his train. This command assumes that the train is stopped."
  ttreverseplayermsg                    "Message to display"
  ttontrigger                           "Wait until the selected Train arrives at the trigger"
  tttrigger                             "Trigger name"
  tttrackmark                           "Trackmark name"
  tttriggertype                         "Select the action to trigger this command"
  ttshowmessage                         "Display a message for the user from text"
  ttshowmessagetext                     "Message to display. Variables can be included like this -  ##varName##"
  ttmessagecolour                       "Text colour for the message."
  ttalertcolour                         "Colour for the alert display"
  ttinterfaceprint                      "Print a message"
  ttinterfaceprintmsg                   "Message to be printed. Variables can be included like this -  ##varName##"
  ttaistop                              "Stop the selected AI Train"
  ttaistopdelay                         "Number of seconds to wait before moving on to the next command"
  ttshowbrowserfile                     "Open a browser to display your HTML code."
  ttshowbrowserfilewidth                "Width in pixels of the browser."
  ttshowbrowserfileheight               "Height in pixels of the browser."
  ttshowbrowserfileleft                 "Left position in pixels of the browser."
  ttshowbrowserfiletop                  "Top position in pixels of the browser."
  ttbrowsercentre                       "Select Yes to place the browser in the centre of the screen."
  ttbrowserpage                         "Page number to display"
  ttbrowsermaxpage                      "The highest page number available for display."
  ttcameraview                          "Choose	a camera view.'"
  ttstopplayer                          "Display a message to tell the player to stop his train. Command waits until train stops"
  ttstopplayermsg                       "Message to display to the player"
  tttrainload                           "Load the train at the selected industry"
  ttindustry                            "Select an industry"
  tttrainunload                         "Unload the train at the selected industry"
  ttpathset                             "Obtain permits and set a path for the train."
  ttsjunc                               "The first junction the train will enter on this path"
  ttsdir                                "The direction to enter the first junction"
  ttejunc                               "The last junction to be used in this path"
  ttedir                                "The direction the train will exit the last junction in the path"
  ttpathclear                           "Should we wait for the train to complete the path before moving on to the next command?"
  ttbias                                "Selected whether the path will favour left or right hand tracks in passing loops"
  ttpathsignal                          "The signal controlling the start of this path."
  ttaddtrainjunction                    "The first junction that this train will enter (Required for permits system)"
  ttaddtrainjunctiondir                 "The direction in which the train will enter the first junction."
  ttsetcameraangle                      "Set the viewing angle for the camera"
  ttcamerayaw                           "Rotation of the camera. -90 looks at the front of a train, +90 at the back"
  ttcamerapitch                         "Up and down angle of the camera. -90 is straight down. +90 is straight up."
  ttcameraradius                        "Distance from the camera to the object."
  ttsoundhorn                           "Sound the horn/whistle"
  ttaislowstart                         "Makes an AI Train start and pick up speed in 10 steps."
  ttaislowstartstep                     "Time (in seconds) for each step"
  ttscenarioend                         "Display a message and then end the scenario"
  ttweatherset                          "Set the weather and the changeability"
  ttweathertype                         "Select from one of the weather types"
  ttweatherchange                       "Select from one of the weather changeability types"
  ttweathersetbetter                    "Make the weather one step better than the current weather"
  ttweathersetworse                     "Make the weather one step worse than the current weather"
  ttaitrainslowstop                     "Makes an AI train slow to a stop in 10 steps"
  ttaitrainstart                        "Start an AI train moving"
  tttrainstopped                        "Wait until the selected train stops moving"
  tttrainstarted                        "Wait until the selected train starts moving"
  tttrainderail                         "Derail the selected train"
  ttenablephysics                       "Enable or disable physics for the selected train."
  ttphysicsbool                         "Select whether to enable or disable"
  ttadvisorylim                         "Set the speed limit for a script controlled train"
  ttadvisoryvalue                       "Limit to set"
  ttloadall                             "Load/Unload all vehicles in the selected train with the selected product. Does not require a visit to an industry"
  ttproduct                             "Select a product"
  ttload                                "Select Load or Unload"
  ttload1                               "First vehicle to load/unload counting from the front of the train"
  ttload2                               "Last vehicle to load/unload counting from the front of the train"
  ttinterfacelog                        "Show the entered text in the jetlog. This can be useful for debugging your scenario"
  ttinterfacelogtext                    "Text to show. Variables can be included like this -  ##varName##"
  ttlabel                               "Label command. This is the place that a goto command will jump to. The label and the goto must be in the same thread."
  ttlabeltext                           "The text for the label command. This is the text that the goto command will look for"
  ttgototext                            "The text for the goto command. The command will search for a label command with this text"
  ttgoto                                "Goto command. This will make the command flow jump to a matching label command. The label and the goto must be in the same thread."
  ttwaitforrandom                       "Wait for a random number of seconds"
  ttwaitforrandomminimum                "Minimum number of seconds to wait"
  ttwaitforrandommaximum                "Maximum number of seconds to wait"
  ttwaituntilrandom                     "Wait until a random time"
  ttsettimevarrandom                    "Set a random time into a time variable"
  ttwaitforrandomminimumhours           "The earliest hour part of the time"
  ttwaitforrandommaximumhours           "The latest hour part of the time"
  ttwaitforrandomminimummins            "The earliest minute part of the time"
  ttwaitforrandommaximummins            "The latest minute part of the time"
  ttwaitforrandomminimumsecs            "The earliest seconds part of the time"
  ttwaitforrandommaximumsecs            "The latest seconds part of the time"
  ttsetgametime                         "Set the game clock to the selected time"
  ttsethours                            "Hours part of the time"
  ttsetmins                             "Minutes part of the time"
  ttsetsecs                             "Seconds part of the time"
  ttsettimerate                         "Set the game time rate"
  tttimerate                            "Select a time rate"
  ttdecouple                            "Decouple a selected number of vehicles from the selected train"
  ttdecouplefront                       "Count the vehicles to be decoupled from the front or rear of the consist"
  ttnumwagons                           "Number of vehicles to decouple."
  tttrainsethandbrake                   "Set the state of the handbrake on all non loco vehicles"
  ttbrakestate                          "Select Yes to apply the brakes, No to release."
  ttcameratojunction                    "Set the camera to the selected junction"
  ttonjunction                          "Wait until the selected train fires the selected trigger at the selected junction"
  ttonjunctype                          "Select an option"
  ttif                                  "Similar to a programmers If command. Execute all commands to the EndIf only if the compare is successful."
  ttifcomparevar                        "Variable to use for compare. Select a variable from the list"
  ttifcomparetype                       "Select a compare type."
  ttelse                                "Start of the Else part of an If command"
  ttend                                 "End of an If / Else loop"
  ttwhile                               "Start of a loop that is executed as long as the compare succeeds"
  ttwhileend                            "End of a While loop"
  ttwhilebreak                          "Command to break out of a while loop"
  ttfor                                 "A loop that is executed a set number of times"
  ttforstart                            "Value of the start variable"
  ttforstep                             "Increment to apply to the start variable on each loop"
  ttforend                              "End of the for loop"
  ttcomment                             "Place a comment in your scenario. The text of the comment will be printed in the jetlog."
  ttcommenttext                         "Text for the comment"
  ttvarsetstring                        "Place some text into a string variable"
  ttvarname                             "Name of the variable. If it does not exist, it will be created"
  ttvarvalue                            "The data to be stored in the variable"
  ttvarstringadd                        "Add some more text to the end of the text in this variable"
  ttvarbooltoggle                       "Reverse the state of the selected Yes/No variable."
  ttvarboolset                          "Set the state of the selected Yes/No variable"
  ttvarnumset                           "Place a number into the selected variable"
  ttvartimeset                          "Place a time into the selected variable"
  ttvarnumadd                           "Add to the number already stored in the selected variable"
  ttvarnumrand                          "Place a random value into a number variable"
  ttmin                                 "Minimum value"
  ttmax                                 "Maximum value"
  ttvarboolrandom                       "Place a random value into a Yes/No variable"
  ttsigspeed                            "Attach the selected speed limit to a signal. Makes a signal work like a speed board."
  ttspeedlimit                          "The limit to set"
  ttoshelp                              "Select whether or not to show on-screen help. Junction arrows and names."
  ttosval                               "Select Yes to show, No to hide."
  ttcouple                              "Couple to another consist. The Train will continue to move until it couples to any consist."
  ttcoupletext                          "Message to display to the player"
  ttplayerdecouple                      "Display a message to the player and then decouple his train."
  ttpants                               "Set the position of the pantograph"
  ttpantstate                           "Select from one of 4 possible states. The effect of each state will depend on the locomotive."
  ttheadlights                          "Set the state of the headlights"
  ttheadlightstate                      "Yes for On, No for Off"
  ttindgetq                             "Get the size of the selected Queue for the selected Industry and place it in the selected variable."
  ttqueue                               "Name of the product queue"
  ttindsetq                             "Adds the value of the selected variable to the selected Queue for the selected Industry from the value in the selected variable."
  ttjuncmanual                          "Set to Yes to allow the junction to be controlled by the player, no to disable player control."
  ttenabled                             "Enable or disable this command in the driver session. Green for enabled and red for disabled."
  ttthreadenabled                       "Enable all commands in this thread. All commands will execute in the driver session."
  ttthreaddisabled                      "Disable all commands in this thread. No command will execute in the driver session."
  ttlibcall                             "Call to your own TrainzScript code. Please see the help file for details."
  ttlibname                             "The name of your library asset. This name must be unique across all library assets."
  ttlibfunction                         "The name of the function to call within your library asset."
  ttlibstring                           "String Parameter to be passed to your function call."
  ttlibstringdisp                       "String Parameters."
  ttlibobject                           "Game Object to be passed to your function call."
  ttlibobjectdel                        "Should this object be deleted from SCS after the library call?"
  ttlibobjectdisp                       "Game Objects."
  ttlibstringadd                        "Add a string parameter."
  ttlibobjectadd                        "Add an object parameter."
  ttlibstringdelete                     "Delete this string parameter."
  ttlibstringdesc                       "String Parameter."
  ttlibobjectdesc                       "Objects Parameter."
  ttlibobjecttype                       "Select the object type to pass to your function call."
  ttlibretvar                           "Variable to contain the value returned by the library."
  ttresetpermits                        "This will reset all permits for the selected train. Not intended for general use. May be needed after a Library Call."
  ttresetjpermit                        "This will reset the permit for one junction for the selected train. To be used with caution. Useful after splitting a consist."
  ttdebug                               "Click to turn debug on or off."
  ttcameraswitch                        "Click to turn user camera switching on or off."
  ttscore                               "Click to turn the score display on or off."
  ttwaittrainstopped                    "Pause execution of this thread until the selected train has stopped"
  ttinterfacepanel                      "Show or hide the selected interfcae panel in Driver."
  ttpanel                               "The panel to be shown or hidden"
  ttinterfaceshow                       "Yes to show the panel, No to hide it."
  ttinstructions                        "Click to turn user instructions on or off. See the help file for details of creating user instructions"
  ttpagename                            "User instructions page file name. DO NOT add .html to the name."
  ttbrowserpagename                     "Browse page file name. DO NOT add .html to the name."
  ttinstassetname                       "The name of the HTML asset containing the instruction pages."
  ttinstdel                             "Delete this page"
  ttinsertinst                          "Insert a page"
  ttshowinstructions                    "Show the user instructions. You must enable instructions at the bottom of the editor screen."
  ttmsgbox                              "Messages"
  ttopeninstructions                    "Instructions"
  ttshowbrowser                         "Displays a standard browser with one or more pages."
  ttbrowserasset                        "The name of the HTML asset containing the browser pages."
  ttbrowsertop                          "Position for the top of the browser."
  ttbrowserleft                         "Position for the left of the browser."
  ttbrowserheight                       "Height of the browser."
  ttbrowserwidth                        "Width of the browser."
  ttbrowserwait                         "Wait for the user to close the browser before moving to the next command."
  ttplaysound                           "Play a sound file. See help for details."
  ttsoundassetname                      "The name of your HTML asset where the sound file is to be found. This name must be unique across all HTML assets."
  ttsoundfilename                       "The name of the wav file to play. Do NOT include the .wav extension."
  ttconsisttocouple                     "The consist to which the train must couple."
  tttrainsetspeed                       "Make the selected train run at a set speed. Speed limits will be obeyed but signals will be ignored."
  tttrainspeed                          "Required speed. The train will accelerate and decelerate gently. Zero will bring the train to a stop."
  ttdecoupled                           "The decoupled train name to be applied to the decoupled part of the consist."
  tttprautopilot                        "A replacement for the Auran Autopilot."
  tttprautopilotmaxspeed                "Maximum speed for this train. It will run at this set speed or the speed limit, whichever is lower."
  ttaispad                              "over ran a red light."
  tttprthrottlestep                     "Amount of change in the throttle at each speed check. Value from 0.00001 to 1.0"
  tttprreddistance                      "Distance in metres from a Red signal when the minimum speed is released."
  ttcustomstart                         "Select whether to display the standard splash screen or your own splash screen at the start of your scenario."
  ttcustassetname                       "The name of the HTML asset containing your splash screen."
  ttcustfilename                        "The name of the HTML file for your splash screen."
  ttcustuserinfo                        "Details to display in the standard splash screen."
  ttsplashon                            "Custom Splash screen ON."
  ttsplashoff                           "Custom Splash screen OFF."
  ttshowmessageduration                 "Number of seconds to display the message."
  ttuserselectcontrol                   "Allow the user to select the control type (DCC or Cab) for manual control trains."
  ttrotatecamera                        "Rotate the camera from a starting point to and end pointin a specified number of steps with a specified delay between steps."
  ttsyaw                                "Starting yaw (in degrees) - the rotation point."
  ttspitch                              "Starting pitch (in degrees) - the up/down point."
  ttsradius                             "Starting radius (in metres) - the distance from the focus object."
  tteyaw                                "Ending yaw (in degrees) - the rotation point."
  ttepitch                              "Ending pitch (in degrees) - the up/down point."
  tteradius                             "Ending radius (in metres) - the distance from the focus object."
  ttsteps                               "The number of steps from the start point to the end point"
  ttrotatedelay                         "The delay (in decimal fractions of a second) between each step."
  ttreroute                             "Attempt to find another path if the preferred path is occupied. Only set yes if there is a sensible alternative path."
  tttprtrackmark                        "Drive the train using the TPR autopilot to the selected trackmark."
  tttprtrigger                          "Drive the train using the TPR autopilot to the selected trigger."
  ttsetrunningnumber                    "Set a running number for the selected vehicle in the selected train."
  ttrunningnumtrain                     "Train containing the vehicle."
  ttrunningnumvehicle                   "The vehicle number in the train. Vehicle 1 should be the first loco."
  ttrunningnumnumber                    "The number to set."
  ttptrainjunctiondir                   "The junction direction from which to clear the permit."
  ttpjunctionerror                      "A valid junction has not been supplied for Junction Reset Permit command."
  ttimporttso                           "A TSO file allows the creation of trackside objects without altering the original route."
  tttsoon                               "TSO import ON."
  tttsooff                              "TSO import OFF."
  tttsoname                             "TSO asset name."
  tttsofile                             "TSO file name."
  ttdistancemultiplier                  "Default 15. Increase this number to increase the distance at which the train starts to reduce speed."
  ttlocolength                          "Alter this value to fine tune the stopping point for the front loco."
  ttcopy                                "Copy this command to the clipboard"
  ttpasteclip                           "Insert commands from the clipboard"
  ttcrossing                            "Select Level Crossing."
  ttcrossingauto                        "Set a level crossing to automatic - it will close when a train is within 200 metres."
  ttcrossingmanual                      "Set a level crossing to manual - it will NOT respond when a train is within 200 metres."
  ttcrossingopen                        "Open a level crossing and leave it in manual mode."
  ttcrossingclose                       "Close a level crossing and leave it in manual mode."
  str-nocrossing                        "Unable to find the level crossing used in a crossing command."
  tttraincommandadd                     "Add a command to this train thread"
  ttcopyn                               "Copy the last n commands to the clipboard."
  ttappendclip                          "Append the commands on the clipboard to this thread."
  ttcopythread                          "Copy to the clipboard all commands from First Command to Last Command."
  ttdelrange                            "DELETE all commands from First Command to Last Command."
  ttvartraintrig                        "Sets the parameters for the Train In trigger variable."
  ttrandomconsists                      "Set up a consist from a selection of random consists seeds and add it at a trackmark"
  ttrandconsist                         "Select the random consist seed to use to create the vehicles"
  ttrandnum                             "Enter the number of vehicles required"
  ttrandtype                            "Select the type of random consist required."
  ttrandadd                             "Add a random consist."
  ttranddelete                          "Delete this random consist."
  ttlibobjectdelete                     "Delete this object parameter."
  ttrand                                "Select Random Consist"
  ttrandc                               "Random Consists"
  ttrandp                               "Random Seeds"
  ttrandaddp                            "Add a random consist seed."
  ttranddeletep                         "Delete this random consist."
  ttranddeletepset                      "Delete this random parameter set."
  ttrandmin                             "Minimum number of vehicles to add from this consist"
  ttrandmax                             "Maximum number of vehicles to add from this consist"
  str-randmin                           "Minimum vehicles"
  str-randmax                           "Maximum vehicles"
  ttaddtrainconsist                     "The consist name to assign to this random consist"
  ttcameraviews                         "Camera"
  tttimeforward                         "Set the game time forward by the selected number of seconds"
  ttimeforwardseconds                   "Number of seconds to add to the current game time"
  tttimeback                            "Set the game time back by the selected number of seconds"
  ttimebackseconds                      "Number of seconds to subtract to the current game time"
  ttvartimedifference                   "Subtract time var 1 from time var 2 and place the result in a third time var"
  ttvarcomp                             "Time variable for calculation"
  ttvarresult                           "Variable to contain the difference between the two compared variables"
  ttplayermonitor                       "Select whether or not to monitor the player train for speeding and passing red lights."
  ttplayermon                           "Player Train Monitor"
  ttvardivide                           "Divide var1 by var2. The result can be placed in a Decimal or Number var"
  ttvarmultiply                         "Multiply two variables and place the result into a third variable"
  ttcommandvarname                      "Select the variable to use in this command"
  ttvartosec                            "Convert the selected Minutes and Seconds variable to seconds and place the result in a Decimal or Number variable"
  ttturntablenext                       "Move the turntable to the next stop"
  ttturntableprev                       "Move the turntable to the previous stop"
  ttturntablestop                       "The stop number that the turntable should move to. Counting from 1"
  ttturntablename                       "Enter the name of the turntable. You must type this exactly as the name appears in Surveyor"
  ttfollow                              "Should this command allow a follow on path to be set. See documentation for full details"
  ttvarinc                              "Add one to the selected avriable"
  ttvardec                              "Subtract one from the selected avriable"
  ttcameratotrain                       "Aim the camera at the selected train"
  ttontrackmark                         "Wait until the selected train is within the radius of the selected trackmark"
  tttprstop                             "Stop the train gradually"
  ttdbfilter                            "Enter one or more characters to set a filter based on those characters. Entering zero characters will remove the filter"
  ttdbjunction                          "The junction connected to the junction at the left side of this row."
  ttdbjunctiondir                       "The direction of this junction connected to the junction at the left side of this row. none will display if no junction."
  ttdbjuncedit                          "Edit the connection between this pair of junctions"
  ttrejectchanges                       "Abandon changes"
  ttsavechanges                         "Save changes"
  ttsetgametimefromvar                  "Sets the game time to the value stored in the selected variable"
  ttvartimeadd                          "Add a number of hours, minutes and seconds to a time variable"
  ttuserselection                       "Ask the player to choose from up to five options"
  ttchoicetext                          "Text to display for this user selection"
  ttpleasechoose                        "Text to display above the user choices"
  tthelp                                "Help for this command"
  ttchoiceadd                           "Add another user choice. A maximum of 5 choices are allowed."
  ttcopyfrom                            "First command to copy to clipboard"
  ttcopyto                              "Last command to copy to clipboard"
  ttdelfrom                             "First command to DELETE"
  ttdelto                               "Last command to DELETE"
  ttviewclipboard                       "View the commands currently on the clipboard"
  ttsound                               "Sound to play to alert user"
  ttsignallinglib                       "Signalling library name"
  str-setbadvar                         "A command has attempted to modify one of the built-in variables"
  str-invalidjunc                       "Invalid junction in Train Cleared Junction command. Junction ="
  str-invalidjunc1                      "Invalid junction in Set Junction To Manual command. Junction ="
  str-invalidjunc2                      "Invalid junction in Junction Set Direction command. Junction ="
  str-invalidjunc3                      "Invalid junction in Path Set command. Junction ="
  str-invalidjunc4                      "Invalid junction in On Junction command. Junction ="
  str-invalidtrain                      "Invalid train in Delete Train command"
  str-invalidtrain1                     "Invalid train in Train Set Control command"
  str-invalidsignal                     "Invalid Signal in Signal Set State command. Signal ="
  str-invalidsignal1                    "Invalid Signal in Signal Set State Ex command. Signal ="
  str-invalidsignal2                    "Invalid Signal in Signal Set Light command. Signal ="
  str-invalidvar                        "Attempt to display a value from an invalid varable"
  str-invalidvehnum                     "Invalid number of vehicles selected in a decouple command"
  str-noindustry                        "No industry selected in an industry queue command"
  str-noindustryload                    "Cannot find the industry specified in a load/unload command"
  str-noindustryq                       "Cannot find queue name in an industry queue command. Queue name ="
  str-nolib                             "Library name not supplied for Library Call command"
  str-libnofind                         "Cannot find library for Library Call command on this computer. Library Name ="
  str-libfail                           "Failed to open library for Library Call command. Library Name ="
  str-libinvalidvar                     "Attempt to pass an invalid variable to a Library Call command."
  str-instructproblem                   "Cannot open user instructions. Please enable user instructions in the editor"
  str-browsernopages                    "No browser pages specified in a User Browser command."
  str-nosound                           "Sound asset name not supplied for Play Sound command"
  str-soundnoasset                      "Cannot find sound asset on this computer for Play Sound command. Asset name ="
  str-soundfailopen                     "Cannot open sound asset for Play Sound command. Asset name ="
  str-nohtmlasset                       "HTML asset name not supplied for a browser command"
  str-htmlnoasset                       "Cannot find HTML asset on this computer for a browser command. Asset name ="
  str-novartraintrig                    "Variable not specified for Var Train In Trigger Set command"
  str-novar                             "Variable not specified for Variable command"
  str-notrigtrig                        "Trigger not specified for Var Train In Trigger Set command"
  str-notrigtrain                       "Train not specified for Var Train In Trigger Set command"
  str-invalidtraintrig                  "Cannot find the train specified for Var Train In Trigger Set command"
  str-invalidtriggertrig                "Cannot find the trigger specified for Var Train In Trigger Set command"
  str-libtrainnofind                    "Unable to pass the selected train in a library call command"
  str-noturntable                       "Cannot find the turntable in a turntable command"
  str-invvarcommand                     "Attempt to use an invalid variable in a variable command"
  menu-junc                             "Junction"
  menu-trackmark                        "Trackmark"
  menu-trigger                          "Trigger"
  menu-train                            "Train"
  menu-decoupled                        "Decoupled/Random Consist Name"
  menu-manual                           "Manual"
  menu-autopilot                        "Autopilot"
  menu-script                           "Script"
  menu-signal                           "Signal"
  menu-blue                             "Blue"
  menu-cyan                             "Cyan"
  menu-white                            "White"
  menu-black                            "Black"
  menu-red                              "Red"
  menu-yellow                           "Yellow"
  menu-green                            "Green"
  menu-auto                             "Automatic"
  menu-stop                             "Stop"
  menu-stopc                            "Stop and Continue"
  menu-caution                          "Caution"
  menu-cautionl                         "Caution Left"
  menu-cautionr                         "Caution Right"
  menu-acaution                         "Advanced Caution"
  menu-acautionl                        "Advanced Caution Left"
  menu-acautionr                        "Advanced Caution Right"
  menu-proceed                          "Proceed"
  menu-proceedl                         "Proceed Left"
  menu-proceedr                         "Proceed Right"
  menu-slow                             "Slow"
  menu-medium                           "Medium"
  menu-yes                              "Yes"
  menu-no                               "No"
  menu-reversed                         "Reversed"
  menu-forward                          "Forward"
  menu-enter                            "Enter"
  menu-ienter                           "InnerEnter"
  menu-stopped                          "Stopped"
  menu-leave                            "Leave"
  menu-ileave                           "InnerLeave"
  menu-internal                         "Internal"
  menu-external                         "External"
  menu-tracking                         "Tracking"
  menu-roaming                          "Roaming"
  menu-industry                         "Industry"
  menu-left                             "Left"
  menu-right                            "Right"
  menu-back                             "Back"
  menu-forw                             "Forward"
  menu-clear                            "Clear"
  menu-cloudy                           "Cloudy"
  menu-drizzle                          "Drizzle"
  menu-rain                             "Rain"
  menu-storm                            "Stormy"
  menu-lsnow                            "Light Snow"
  menu-msnow                            "Medium Snow"
  menu-hsnow                            "Heavy Snow"
  menu-none                             "None"
  menu-periodic                         "Periodic"
  menu-extreme                          "Extreme"
  menu-prod                             "Product"
  menu-load                             "Load"
  menu-unload                           "Unload"
  menu-eq                               "EQUAL"
  menu-leq                              "LESS OR EQUAL"
  menu-less                             "LESS"
  menu-geq                              "GREATER OR EQUAL"
  menu-greater                          "GREATER"
  menu-neq                              "NOT EQUAL"
  menu-vname                            "Var Name"
  menu-q                                "Queue"
  menu-pan                              "Select Panel"
  menu-html                             "Instructions HTML Asset Name"
  menu-htmlp                            "HTML page"
  menu-height                           "Height"
  menu-width                            "Width"
  menu-page                             "Page"
  menu-random                           "Random Consist"
  menu-allowcameraswitching             "Allow Camera Switching"
  menu-on                               "ON"
  menu-off                              "OFF"
  menu-edit                             "Edit"
  menu-front                            "From FRONT"
  menu-rear                             "From REAR"
  menu-details                          "Enter Details"
  menu-choice                           "User Selection"
  menu-command                          "Command Name"
  menu-commanddescription               "Description"
  menu-commandparam                     "Parameter"
  menu-commandnone                      "There is no help avaialable for that command"
  menu-commandhelp                      "List of Commands"
  menu-tso-surveyor                     "Due to Trainz limitations, it is not possible to use Surveyor placed trains and TSO file import in the same scenario"
  menu-bad-juncname                     "The following junctions have a name starting with a space character. A space character must not be used at the beginning of a junction name as it will cause errors in the scenario.<br><br>"
  menu-copy-from                        "Start Copy at :"
  menu-copy-end                         "End Copy at :"
  menu-del-from                         "Start DELETE at :"
  menu-del-end                          "End DELETE at :"
  menus-unable-copy                     "UNABLE TO COPY THE SELECTED COMMAND"
}
kuid-table
{
  scs2006                               <kuid:41009:1046>
  session-variables                     <kuid:-3:10197>
  driver-module                         <kuid:-16:10240>
  browser-library                       <kuid:41009:1064>
  control-type                          <kuid:-16:2030>
  scs-signals                           <kuid:41009:1025>
  scs-html-demo                         <kuid:41009:100059>
  scs-sound-demo                        <kuid:41009:1069>
  scs-libcall-demo                      <kuid:41009:100018>
  scs-manual                            <kuid:41009:100228>
}

Файлы:

2 toot.wav	16.4 kB
alarm 1.wav	28.2 kB
alarm 2.wav	32.8 kB
alert.wav	2.0 kB
bell 1.wav	64.1 kB
bell 2.wav	52.0 kB
bong.wav	52.5 kB
buzzer 1.wav	7.2 kB
buzzer 2.wav	88.1 kB
cheers.wav	34.1 kB
cust_hud.tga	282.3 kB
depart whistle 1.wav	33.0 kB
depart whistle 2.wav	118.4 kB
ding.wav	26.2 kB
end.html	276 B
funeral.wav	52.3 kB
go.wav	17.6 kB
helpfile.gs	61.7 kB
hudimages
hudimages / backforward.jpg	4.2 kB
hudimages / backleft.jpg	991 B
hudimages / backright.jpg	999 B
hudimages / building.jpg	651 B
hudimages / cbutton.tga	12.5 kB
hudimages / cbutton_on.tga	12.5 kB
hudimages / forwardback.jpg	984 B
hudimages / gradedown.jpg	9.8 kB
hudimages / gradenone.jpg	9.6 kB
hudimages / gradeup.jpg	9.8 kB
hudimages / ibutton.tga	12.5 kB
hudimages / ibutton_on.tga	12.5 kB
hudimages / leftleft.jpg	1.0 kB
hudimages / leftright.jpg	1.0 kB
hudimages / mbutton.tga	12.5 kB
hudimages / mbutton_on.tga	12.5 kB
hudimages / rightleft.jpg	1.0 kB
hudimages / rightright.jpg	1.0 kB
hudimages / siggreen.jpg	18.3 kB
hudimages / sigred.jpg	18.3 kB
hudimages / sigyellow.jpg	18.4 kB
hudimages / spd.jpg	3.9 kB
hudimages / spdfast.jpg	1.2 kB
hudimages / spdslow.jpg	1.2 kB
images
images / 2backleft.tga	3.1 kB
images / 2backright.tga	3.1 kB
images / 2jback1.tga	3.1 kB
images / 2jback2.tga	3.1 kB
images / 2left.tga	3.1 kB
images / 2right.tga	3.1 kB
images / accept.tga	7.9 kB
images / accept2.tga	7.9 kB
images / aid.tga	4.0 kB
images / arrowdown.tga	4.5 kB
images / arrowleft.tga	4.5 kB
images / arrowright.tga	4.5 kB
images / arrowup.tga	4.5 kB
images / back.tga	4.0 kB
images / backforward.jpg	4.2 kB
images / backforward.tga	3.1 kB
images / backleft.jpg	3.5 kB
images / backleft.tga	3.1 kB
images / backright.jpg	4.2 kB
images / backright.tga	3.1 kB
images / bad.tga	4.0 kB
images / box.tga	3.5 kB
images / caution.tga	4.0 kB
images / clock.tga	4.0 kB
images / close.tga	4.0 kB
images / coffee.tga	4.0 kB
images / copy.tga	4.5 kB
images / couple.tga	4.0 kB
images / cross.tga	4.5 kB
images / dcouple.tga	4.0 kB
images / forward.tga	3.1 kB
images / forwardback.jpg	4.1 kB
images / go.tga	4.5 kB
images / gradedown.jpg	9.8 kB
images / gradenone.jpg	9.6 kB
images / gradeup.jpg	9.8 kB
images / green.tga	4.5 kB
images / help.tga	4.5 kB
images / info.tga	4.0 kB
images / insert.tga	4.5 kB
images / jback1.tga	3.1 kB
images / jback2.tga	3.1 kB
images / left.tga	3.1 kB
images / leftleft.jpg	4.2 kB
images / look.tga	4.0 kB
images / ok.tga	7.9 kB
images / ok2.tga	7.9 kB
images / okold.tga	4.7 kB
images / open.tga	4.0 kB
images / paste.tga	4.5 kB
images / pause.tga	4.0 kB
images / phew.tga	4.0 kB
images / play.tga	4.0 kB
images / plus.tga	4.5 kB
images / red.tga	4.5 kB
images / reject.tga	7.9 kB
images / reject2.tga	7.9 kB
images / reverse.tga	37.4 kB
images / right.tga	3.1 kB
images / rightright.jpg	3.5 kB
images / save.tga	4.0 kB
images / scs_splash_end.jpg	15.3 kB
images / siggreen.jpg	18.3 kB
images / sigred.jpg	18.3 kB
images / sigyellow.jpg	18.4 kB
images / spd.jpg	3.9 kB
images / spdfast.jpg	1.2 kB
images / spdslow.jpg	1.2 kB
images / stop.tga	4.0 kB
images / tick.tga	4.0 kB
images / tickbox.tga	3.5 kB
images / tpr.tga	4.0 kB
mcglobal.gse	683 B
mcroute.gse	8.5 kB
mcscripthud.gse	7.1 kB
mcworld.gse	3.3 kB
menubuilder.gse	20.2 kB
missing.html	751 B
proceed..wav	21.7 kB
proceed.wav	21.6 kB
randomconsist.gse	1.9 kB
red alert.wav	30.7 kB
scripthud.html	2.2 kB
scs2006.gse	55.0 kB
scs2006.jpg	14.0 kB
scs2htmlpageslib.gse	10.0 kB
siren.wav	41.7 kB
smallbrowser.html	154 B
start.html	2.1 kB
station 1.wav	24.1 kB
station 2.wav	301.5 kB
tpr.tga	4.0 kB
tprdispatcher.gse	2.1 kB
tprdispcustom.gse	34.7 kB
tprglobal.gse	1.5 kB
tprpathfinder.gse	5.9 kB
tprpermits.gse	7.2 kB
tprproducts.gse	1.8 kB
tprscheduler.gse	7.1 kB
tprtimetablescheduler.gse	2.0 kB
userchoice.html	1.2 kB
warble siren.wav	12.8 kB
Общий объём файлов:	2.1 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:41009:1046>	behavior	SCS2006	2.5	14.06.2020 11:51:28	1.4 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-16:2030>	#-16	behavior	Тип управления	0	29.01.2024 0:24:14	9.2 MB
<kuid:-16:10240>	#-16	library	Окно Машиниста	3.2	1.07.2020 12:56:36	330.0 kB
<kuid:-3:10197>	#-3	library	ПеременныеСессии	0	2.07.2020 9:39:31	257 B
<kuid:41009:1025>	#41009	library	SCS2006 Signalling	2.5	14.06.2020 11:51:26	18.8 kB
<kuid:41009:1046>	#41009	behavior	SCS2006	2.5	14.06.2020 11:51:28	1.4 MB
<kuid:41009:1064>	#41009	library	SCS2006 HTML Pages Library	2.5	14.06.2020 11:51:28	128.0 kB
<kuid:41009:1069>	#41009	html-asset	SCS2006 Sound Demo	2.5	14.06.2020 11:51:28	107.4 kB
<kuid:41009:100018>	#41009	library	SCS2006 Library Call Demo	2.5	14.06.2020 11:51:28	14.9 kB
<kuid:41009:100059>	#41009	html-asset	SCS2006 HTML Demo	2.5	14.06.2020 11:51:26	56.5 kB
<kuid:41009:100228>	#41009	html-asset	SCS2006 User Manual	2.5	14.06.2020 11:51:26	455.9 kB
Всего связей: 10, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:41009:1025>	#41009	library	SCS2006 Signalling	2.5	14.06.2020 11:51:26	18.8 kB
<kuid:41009:1046>	#41009	behavior	SCS2006	2.5	14.06.2020 11:51:28	1.4 MB
<kuid:41009:100018>	#41009	library	SCS2006 Library Call Demo	2.5	14.06.2020 11:51:28	14.9 kB
<kuid2:49099:1025:2>	#49099	profile	Miniland 2006	2.6	2.08.2020 17:36:55	17.3 kB
<kuid:49099:1162>	#49099	profile	Pick-up Goods Duty	2.6	10.01.2021 16:49:50	43.0 kB
<kuid:50861:1063>	#50861	profile	TidewaterS2	2.6	17.01.2021 1:06:52	26.5 kB
<kuid:71378:1187>	#71378	profile	100 Trains	2.6	17.01.2021 0:49:23	146.8 kB
<kuid:71378:1281>	#71378	profile	SCS2006 Hybrid	2.6	22.07.2023 11:21:17	62.6 kB
<kuid:71378:1290>	#71378	profile	SCS2006	2.6	24.07.2023 19:24:05	61.1 kB
<kuid:71378:1352>	#71378	profile	Daily Timetable	2.6	2.08.2020 9:44:30	58.5 kB
<kuid:71378:100010>	#71378	profile	Introductory	2.6	2.08.2020 9:43:17	98.9 kB
<kuid:71378:100012>	#71378	profile	Goods Yard 1	2.6	26.07.2023 18:42:20	96.4 kB
<kuid:71378:100028>	#71378	profile	50 Trains	2.6	26.07.2023 18:42:20	99.0 kB
<kuid:138845:1184>	#138845	profile	Shunting at the paper mill	2.6	2.08.2020 10:09:07	56.4 kB
<kuid:138845:1192>	#138845	profile	Niddertal SC1	2.6	12.01.2021 8:43:41	71.1 kB
<kuid:174857:1247>	#174857	profile	LBC Yard Track Maintenance	2.5	10.01.2021 14:19:59	73.9 kB
<kuid:195134:100267>	#195134	profile	BR Challenge	2.6	29.01.2021 1:06:12	268.1 kB
<kuid2:239249:100128:1>	#239249	profile	Morgenzug - Passiv TRS07 TS2010	2.6	2.08.2020 10:22:20	46.3 kB
<kuid2:239249:100129:1>	#239249	profile	Morning Train - active TRS07 TS2010	2.6	2.08.2020 10:06:13	47.7 kB
<kuid2:239249:100507:1>	#239249	profile	Morgenzug - Passiv	2.6	2.08.2020 17:38:28	46.1 kB
<kuid2:239249:100509:1>	#239249	profile	Morgenzug - Aktiv	2.6	29.01.2021 0:21:14	48.5 kB
<kuid2:239249:100510:1>	#239249	profile	Morning Train - passive	2.6	29.01.2021 0:30:48	46.0 kB
<kuid2:239249:100513:1>	#239249	profile	Morning Train - active	2.6	29.01.2021 0:20:59	47.5 kB
<kuid:269212:1044>	#269212	profile	ErsteSchritte SCS2006 Niddertalbahn2006	2.6	2.08.2020 9:28:47	75.7 kB
<kuid2:269212:1058:1>	#269212	profile	zweites szenario scs2006 Niddertalbahn	2.6	27.07.2023 3:58:03	75.6 kB
<kuid2:269212:1087:1>	#269212	profile	2nd attempt to DLS - 3tes scs2006 Szenario fuer Niddertalbahn	2.6	24.07.2023 19:24:05	108.6 kB
<kuid:269212:1137>	#269212	profile	DB-Projekt SCS2006-1 VT98 Retter der Nebenbahn	2.6	29.01.2021 1:06:32	61.9 kB
<kuid:269212:1161>	#269212	profile	my McCall Yard SCS2006Szenario01	2.6	17.01.2021 0:52:41	74.5 kB
<kuid2:269212:1221:1>	#269212	profile	MyGippsland-SCS2006-1	2.6	2.08.2020 17:32:23	120.4 kB
<kuid:269212:1229>	#269212	profile	MyGippsland-SCS2006-2a	2.6	2.08.2020 10:03:04	152.9 kB
<kuid:269212:1237>	#269212	profile	MyGippsland-SCS2006-2b	2.6	2.08.2020 10:15:15	170.1 kB
<kuid:269212:1254>	#269212	profile	MyVivarais-SCS2006-1	2.6	22.07.2023 11:21:17	75.7 kB
<kuid:269212:1259>	#269212	profile	MyVivarais-SCS2006-2	2.6	22.07.2023 5:08:28	76.7 kB
<kuid:458053:1014>	#458053	profile	Transcevenol : Des montagnes et du charbon	3	29.01.2021 0:49:39	208.4 kB