<kuid:776020:101524> Кабина ЧС4Т DCC

Тип: Кабина
Опубликовано: 30.05.2023 12:58:58
Скачиваний: 141
Размер: 39.3 MB
Автор: Dimmon82

Скачать

Отличия от многофункциональной кабины:
1. При экстренном торможении не выбивает ГВ.
2. САУТ не реагирует на превышение скорости - позиции не сбрасываются.
3. Возможность покидать локомотив - обзор статической камерой (клавиша 4), при этом управлять с клавиатуры. Параметры не пропадают, кроме случаев смены показаний светофоров и реакции САУТ. После возвращения из другой машины для возобновления всех функций необходимо заново включить ГВ и ЭПК.
4. Не выбивает ГВ при перегрузке.
5. Управление DCC.

config.txt:

category-class                          "ZI"
script                                  "chs_cab.gs"
class                                   "chs_cab"
cameradefault                           0
kind                                    "interior"
username                                "Cab ChS4T DCC"
username-ru                             "Кабина ЧС4Т DCC"
category-region                         "RU"
category-era                            "2000s"
trainz-build                            3.5
description                             "Differences from the multifunction cabin:
1. Emergency braking do not knock GV.
2. SAUT not respond to speeding - position not reset.
3. The ability to leave the locomotive - an overview of the static camera (key 4), with control of the keyboard. Settings are not lost, except in cases of traffic lights changing indications and reactions SAUT. After returning from another machine in order to resume all functions, it is necessary to turn on the GV and EPK again..
4. Do not knock GV overload.
5. Management DCC."
description-ru                          "Отличия от многофункциональной кабины:
1. При экстренном торможении не выбивает ГВ.
2. САУТ не реагирует на превышение скорости - позиции не сбрасываются.
3. Возможность покидать локомотив - обзор статической камерой (клавиша 4), при этом управлять с клавиатуры. Параметры не пропадают, кроме случаев смены показаний светофоров и реакции САУТ. После возвращения из другой машины для возобновления всех функций необходимо заново включить ГВ и ЭПК.
4. Не выбивает ГВ при перегрузке.
5. Управление DCC."
license                                 "Free for non commercial use"
cameralist
{
  camera0                               -0.541,-0.13,0.515,12.572,0
  camera1                               -1.554,-0.588,0.515,10.111,0
  camera2                               1.511,-0.51,0.655,8.74,0
  camera3                               1.061,-0.376,0.515,12.569,0
}
mesh-table
{
  default
  {
    mesh                                "chs4t_cab.IM"
    auto-create                         1
    effects
    {
      speed
      {
        kind                            "name"
        att                             "a.saut5"
        name                            "speed"
        fontsize                        0.0128
        fontcolor                       150,280,200
      }
      maxspeed
      {
        kind                            "name"
        att                             "a.saut4"
        name                            "maxspeed"
        fontsize                        0.0128
        fontcolor                       400,60,50
      }
      signaldist
      {
        kind                            "name"
        att                             "a.saut2"
        name                            "signaldist"
        fontsize                        0.0128
        fontcolor                       400,60,50
      }
    }
  }
  pomoha
  {
    auto-create                         1
    mesh                                "pomoha.im"
    anim                                "pomoha.kin"
    animation-loop-speed                1
    att                                 "a.pom"
    att-parent                          "default"
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "revers.im"
    auto-create                         1
    att                                 "a.revers"
    limits                              0,2
    angles                              0,1.25
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.14
    tooltip-text                        "Реверсор"
  }
  controller
  {
    kind                                "pulllever"
    mesh                                "traction.im"
    auto-create                         1
    att                                 "a.traction"
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0.001,0.001,0.001,0.001,0.001
    radius                              0.08
    mousespeed                          0.55
    angles                              -1.1,1.1
    limits                              -2,2
    tooltip-text                        "Контроллер"
  }
  ups
  {
    kind                                "needle"
    mesh                                "strelka.IM"
    auto-create                         1
    att                                 "a.needle3"
    angles                              0,5.5
    limits                              0,32
  }
  okno_r
  {
    mesh                                "win_r.IM"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.win_r"
    limits                              0,1
    angles                              0,0.65
    value                               1
    mousespeed                          -1
  }
  okno_l
  {
    mesh                                "win_l.IM"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.win_l"
    limits                              0,1
    angles                              0,0.65
    value                               1
    mousespeed                          -1
  }
  trainbrake_lever2
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "bigtorm.IM"
    att                                 "a.bigtorm"
    limits                              0,100
    angles                              0,-2
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0.001,0.001,0.001,0.001,0.001,0.001,0.001
    radius                              0.15
    mousespeed                          -1
    tooltip-text                        "395"
  }
  independantbrake_lever2
  {
    mesh                                "smalltorm.IM"
    att                                 "a.smalltorm"
    auto-create                         1
    kind                                "lever"
    angles                              0,-2.2
    limits                              0,100
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0.001,0.001,0.001,0.001,0.001
    radius                              0.15
    test-collisions                     1
    mousespeed                          -1
    tooltip-text                        "254"
  }
  reostat_torm
  {
    kind                                "pulllever"
    mesh                                "skor.IM"
    att                                 "a.skor"
    limits                              -100,100
    angles                              -0.2618,0.2618
    notches                             0,0.5,1
    notchheight                         0.001,0.001,0.001
    radius                              0.18
    auto-create                         1
    tooltip-text                        "ЭДТ"
  }
  sl2m
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "speedo_needle.IM"
    att                                 "a.speedo_needle"
    limits                              0,48
    angles                              0,4.18
  }
  bplocomain_needle
  {
    mesh                                "needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain_needle"
    limits                              0,1600
    angles                              0,4.6
  }
  bptrainbrakepipe_needle
  {
    mesh                                "needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakepipe_needle"
    limits                              0,1600
    angles                              0,7.2
  }
  bptrainbrakecylinder_needle
  {
    mesh                                "needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakecylinder_needle"
    limits                              0,1600
    angles                              0.1,7.4
  }
  bploco_equaliser
  {
    mesh                                "needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain"
    limits                              0,1600
    angles                              0,7.2
  }
  bplocomain_needle1
  {
    mesh                                "needle.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain_needle1"
    limits                              0,1600
    angles                              0,4.6
  }
  pantograph_lever2
  {
    kind                                "lever"
    mesh                                "pantograph.IM"
    att                                 "a.pantograph"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          10
    tooltip-text                        "Пантограф 1"
  }
  knopka_rb
  {
    mesh                                "pbz.IM"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.pbz"
    limits                              0,1
    angles                              0,0.006
    mousespeed                          15
    value                               1
    tooltip-text                        "РБ"
  }
  siden
  {
    kind                                "lever"
    mesh                                "siden.IM"
    att                                 "a.siden"
    auto-create                         1
    limits                              0,1
    angles                              0,-1.4
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          -1
    tooltip-text                        ""
  }
  kv_ted
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.ampmeter_needle"
    limits                              0,1000
    angles                              0,4
  }
  a_ted1
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needle2"
    limits                              0,1000
    angles                              0,4.3
  }
  a_ted2
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.napryagenie"
    limits                              0,1000
    angles                              0,4.3
  }
  kv_set
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needle4"
    limits                              0,1000
    angles                              0,2.4
  }
  a_stab
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needle6"
    limits                              0,1000
    angles                              0,3
  }
  a_bat
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needle7"
    limits                              0,1000
    angles                              0,4
  }
  v_bat
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needle8"
    limits                              0,1500
    angles                              0,2.4
  }
  v_torm
  {
    mesh                                "needle1.IM"
    auto-create                         1
    kind                                "needle"
    att                                 "a.needle9"
    limits                              0,1000
    angles                              0,3
  }
  epk
  {
    mesh                                "kluch-epk.IM"
    att                                 "a.kluch-epk"
    auto-create                         1
    kind                                "lever"
    angles                              0,2
    limits                              0,1
    att-parent                          "default"
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0.15
    mousespeed                          -100
    tooltip-text                        "ЭПК"
  }
  als_0
  {
    mesh                                "a_g.im"
    att                                 "a.0"
    kind                                "light"
  }
  als_1
  {
    mesh                                "a_y.im"
    att                                 "a.1"
    kind                                "light"
  }
  als_2
  {
    mesh                                "a_yr.im"
    att                                 "a.2"
    kind                                "light"
  }
  als_3
  {
    mesh                                "a_r.im"
    att                                 "a.3"
    kind                                "light"
  }
  als_4
  {
    mesh                                "a_w.im"
    att                                 "a.4"
    kind                                "light"
  }
  lamp_otpusk
  {
    mesh                                "c.im"
    att                                 "a.s1"
    kind                                "light"
  }
  lamp_perekricha
  {
    mesh                                "p.im"
    att                                 "a.s2"
    kind                                "light"
  }
  lamp_tormoz
  {
    mesh                                "t.im"
    att                                 "a.s3"
    kind                                "light"
  }
  lamp_compressor
  {
    mesh                                "avar1.im"
    att                                 "a.s4"
    kind                                "light"
  }
  lamp_filtr
  {
    mesh                                "filtr.im"
    att                                 "a.s5"
    kind                                "light"
  }
  lamp_vent2
  {
    mesh                                "ventelator2.im"
    att                                 "a.s6"
    kind                                "light"
  }
  lamp_vent1
  {
    mesh                                "ventelator1.im"
    att                                 "a.s7"
    kind                                "light"
  }
  lamp_nasos
  {
    mesh                                "nasos.im"
    att                                 "a.s8"
    kind                                "light"
  }
  lamp_pps
  {
    mesh                                "ps_green.im"
    att                                 "a.s9"
    kind                                "light"
  }
  lamp_blockzachit
  {
    mesh                                "blok.im"
    att                                 "a.s10"
    kind                                "light"
  }
  lamp_zemlyavsp
  {
    mesh                                "zemla.im"
    att                                 "a.s12"
    kind                                "light"
  }
  lamp_vutorm
  {
    mesh                                "tormozpc.im"
    att                                 "a.s13"
    kind                                "light"
  }
  lamp_vusilovaya
  {
    mesh                                "silovaya.im"
    att                                 "a.s14"
    kind                                "light"
  }
  lamp_vuavariya
  {
    mesh                                "vu_silovaya.im"
    att                                 "a.s16"
    kind                                "light"
  }
  lamp_psprom
  {
    mesh                                "ps_red.im"
    att                                 "a.s15"
    kind                                "light"
  }
  lamp_vuvspom
  {
    mesh                                "vu_vspom.im"
    att                                 "a.s17"
    kind                                "light"
  }
  lamp_zemlya
  {
    mesh                                "zemlya.im"
    att                                 "a.s18"
    kind                                "light"
  }
  lamp_buhgolch
  {
    mesh                                "rele.im"
    att                                 "a.s19"
    kind                                "light"
  }
  lamp_maslotrans
  {
    mesh                                "transform.im"
    att                                 "a.s20"
    kind                                "light"
  }
  lamp_otpusk2
  {
    mesh                                "otpusktorm.im"
    att                                 "a.s21"
    kind                                "light"
  }
  lamp_blockbezop
  {
    mesh                                "blok_bez.im"
    att                                 "a.s22"
    kind                                "light"
  }
  sw_gv
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "Управление (ГВ)"
  }
  sw_compressor
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler01"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "Компрессор 1"
  }
  sw_reostat
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler02"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "Электрический тормоз"
  }
  sw_radio
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler03"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "Радиостанция"
  }
  sw_rezerv
  {
    kind                                "lever"
    mesh                                "tumbler.IM"
    att                                 "a.tumbler04"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "В1"
  }
  sw_pesok
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler05"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "Вспом. компрессор"
  }
  pantograph_lever
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler06"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "Пантограф 2"
  }
  sw_kompressor2
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler07"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "Компрессор 2"
  }
  sw_ventilator
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler08"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "Вентиляторы"
  }
  sw_rezerv2
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler09"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        ""
  }
  sw_alsn
  {
    kind                                "lever"
    mesh                                "tumbler1.IM"
    att                                 "a.tumbler10"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "АЛСН/Без АЛСН"
  }
  sw_manual
  {
    kind                                "lever"
    mesh                                "tumbler2.IM"
    att                                 "a.tumbler11"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "Ручное управление"
  }
  sw_svet
  {
    kind                                "lever"
    mesh                                "tumbler2.IM"
    att                                 "a.tumbler12"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "Освещение кабины"
  }
  light_switch
  {
    kind                                "lever"
    mesh                                "tumbler2.IM"
    att                                 "a.tumbler13"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "Прожектор"
  }
  sw_bfred
  {
    kind                                "lever"
    mesh                                "tumbler2.IM"
    att                                 "a.tumbler14"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "БФ правый"
  }
  sw_bfr
  {
    kind                                "lever"
    mesh                                "tumbler2.IM"
    att                                 "a.tumbler15"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "БФ левый"
  }
  sw_bfl
  {
    kind                                "lever"
    mesh                                "tumbler2.IM"
    att                                 "a.tumbler16"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "Ограничение силы"
  }
  sw_kontrol1
  {
    kind                                "lever"
    mesh                                "tumbler3.IM"
    att                                 "a.tumbler17"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "Контроль ламп 1"
  }
  sw_kontrol2
  {
    kind                                "lever"
    mesh                                "tumbler3.IM"
    att                                 "a.tumbler18"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "Контроль ламп 2"
  }
  sw_kontrol3
  {
    kind                                "lever"
    mesh                                "tumbler3.IM"
    att                                 "a.tumbler19"
    auto-create                         1
    limits                              0,1
    angles                              0,0.7
    notches                             0,1
    notchheight                         0.001,0.001
    radius                              0
    mousespeed                          100
    tooltip-text                        "Контроль ламп 3"
  }
  wheelslip_light
  {
    mesh                                "lr2.im"
    kind                                "light"
    att                                 "a.s24"
  }
}
thumbnails
{
  0
  {
    image                               "scr.jpg"
    width                               240
    height                              180
  }
}
kuid                                    <kuid:776020:101524>
kuid-table
{
}

Файлы:

sound
sound / cabin.txt	932 B
sound / comp3.wav	60.9 kB
sound / controller.wav	11.0 kB
sound / 254_0.wav	158.1 kB
sound / epk_vkl.wav	12.7 kB
sound / epk2.wav	52.3 kB
sound / 254_torm.wav	242.1 kB
sound / epk.wav	142.6 kB
sound / gv_off.wav	55.9 kB
sound / klapan.wav	7.4 kB
sound / gv_on.wav	32.8 kB
sound / kont.wav	19.6 kB
sound / fan1.wav	130.2 kB
sound / kont2.wav	19.4 kB
sound / kont_vikl.wav	24.1 kB
sound / kont_vkl.wav	29.9 kB
sound / kran_0.wav	31.1 kB
sound / fan3.wav	240.2 kB
sound / kran_1.wav	43.2 kB
sound / kran_3.wav	170.5 kB
sound / kran_20.wav	188.1 kB
sound / nasos1.wav	160.2 kB
sound / kran_00.wav	225.7 kB
sound / pant_up.wav	97.6 kB
sound / kran_4.wav	245.1 kB
sound / ps+.wav	34.1 kB
sound / panto_down.wav	85.7 kB
sound / nasos3.wav	138.2 kB
sound / ps-.wav	36.9 kB
sound / r_1.wav	255.1 kB
sound / r_13.wav	293.4 kB
sound / r_11.wav	279.4 kB
sound / r_0.wav	410.9 kB
sound / r_10.wav	346.9 kB
sound / r_12.wav	353.4 kB
sound / r_14.wav	260.9 kB
sound / r_15.wav	321.4 kB
sound / r_17.wav	253.4 kB
sound / r_18.wav	304.4 kB
sound / r_16.wav	408.9 kB
sound / r_22.wav	327.6 kB
sound / r_2.wav	422.9 kB
sound / r_19.wav	386.4 kB
sound / r_21.wav	403.9 kB
sound / comp1.wav	1.3 MB
sound / r_23.wav	347.9 kB
sound / r_24.wav	278.4 kB
sound / r_20.wav	630.4 kB
sound / r_26.wav	265.4 kB
sound / r_27.wav	323.4 kB
sound / r_25.wav	346.9 kB
sound / r_3.wav	435.0 kB
sound / r_29.wav	391.4 kB
sound / rb.wav	25.7 kB
sound / r_6.wav	271.1 kB
sound / r_4.wav	305.5 kB
sound / reverser.wav	11.4 kB
sound / revers.wav	32.2 kB
sound / r_5.wav	356.9 kB
sound / r_7.wav	325.9 kB
sound / r_30.wav	392.2 kB
sound / r_8.wav	254.1 kB
sound / saut_warn.wav	4.3 kB
sound / r_9.wav	343.0 kB
sound / s_1.wav	115.0 kB
sound / s_2.wav	111.2 kB
sound / stuk254.wav	10.4 kB
sound / stuk395.wav	6.9 kB
sound / saut_4.wav	84.4 kB
sound / saut_0.wav	115.4 kB
sound / stop.wav	77.6 kB
sound / saut_2.wav	112.4 kB
sound / reostat.wav	229.3 kB
sound / saut_3.wav	137.5 kB
sound / saut_1.wav	121.9 kB
sound / vkl.wav	5.3 kB
sound / vent3.wav	60.9 kB
sound / svistok.wav	120.8 kB
sound / r_28.wav	1.0 MB
sound / time.wav	94.2 kB
sound / trans_start.wav	115.6 kB
sound / sl2m.wav	289.5 kB
sound / vent1.wav	967.5 kB
5.texture.txt	24 B
a_y.im	640 B
a_g.im	636 B
a_w.im	640 B
a_r.im	640 B
7.texture.txt	24 B
6.texture.txt	24 B
alsn.texture.txt	27 B
avar1.im	476 B
a_yr.im	628 B
blok_bez.im	480 B
avar2.im	476 B
box1.texture.txt	27 B
blok.im	476 B
c.im	472 B
bigtorm.im	15.6 kB
chs_cab.gs	4.6 kB
dev1.texture.txt	27 B
chs4tsaut.gs	33.4 kB
dev2.texture.txt	27 B
7.tga	256.0 kB
dinamic.texture.txt	30 B
dver.texture.txt	27 B
box1.tga	256.0 kB
epk.texture.txt	26 B
alsn.tga	256.0 kB
epkbox.texture.txt	29 B
filtr.im	476 B
horn.im	2.0 kB
kluch-epk.im	7.1 kB
epk.tga	64.0 kB
kon.texture.txt	26 B
kran 254.texture.txt	31 B
dinamic.tga	256.0 kB
kran 395a.texture.txt	32 B
kran 395b.texture.txt	32 B
kon.tga	256.0 kB
krani2.texture.txt	29 B
dev2.tga	1.0 MB
kurtka.texture.txt	29 B
l_0.im	712 B
5.tga	1.0 MB
l_stena1.texture.txt	31 B
6.tga	1.0 MB
dev1.tga	1.0 MB
lamps.texture.txt	28 B
lr1.im	476 B
kurtka.tga	256.0 kB
lr2.im	476 B
manometrs.texture.txt	32 B
epkbox.tga	1.0 MB
motor.texture.txt	28 B
dver.tga	1.0 MB
nametu1.texture.txt	30 B
chs4t_cab.im	1.5 MB
nametu2.texture.txt	30 B
nasos.im	476 B
kran 254.tga	1.0 MB
needle.im	2.3 kB
needle1.im	2.3 kB
obodis.texture.txt	29 B
kran 395a.tga	1.0 MB
okno.texture.txt	27 B
okno1.texture.txt	28 B
otpusktorm.im	484 B
p.im	472 B
obodis.tga	256.0 kB
kran 395b.tga	1.0 MB
p1.texture.txt	25 B
manometrs.tga	1.0 MB
p2.texture.txt	25 B
p3.texture.txt	25 B
okno.tga	256.0 kB
okno1.tga	256.0 kB
p45.texture.txt	26 B
krani2.tga	1.0 MB
l_stena1.tga	1.0 MB
p5.texture.txt	25 B
motor.tga	1.0 MB
p6.texture.txt	25 B
p6s.texture.txt	26 B
lamps.tga	1.0 MB
p6.tga	256.0 kB
p_stena.texture.txt	30 B
nametu1.tga	1.0 MB
pantograph.im	3.1 kB
pbz.im	3.6 kB
pechka.texture.txt	29 B
pered.texture.txt	28 B
podlok.texture.txt	29 B
p2.tga	1.0 MB
podnog.texture.txt	29 B
nametu2.tga	1.0 MB
p1.tga	1.0 MB
pol.texture.txt	26 B
podlok.tga	256.0 kB
pechka.tga	256.0 kB
p5.tga	1.0 MB
pomoha.texture.txt	29 B
ps_green.im	476 B
p3.tga	1.0 MB
ps_red.im	480 B
pultsaut.texture.txt	31 B
pomoha.im	183.1 kB
p45.tga	1.0 MB
raciya.texture.txt	29 B
radio.im	410 B
p6s.tga	1.0 MB
rama.texture.txt	27 B
rama1.texture.txt	28 B
p_stena.tga	1.0 MB
rb.texture.txt	25 B
rele.im	476 B
rama.tga	256.0 kB
sa_0.im	712 B
revers.im	25.4 kB
sa_140.im	1.3 kB
sa_30.im	1.3 kB
sa_20.im	1.2 kB
sa_80.im	1.2 kB
pered.tga	1.0 MB
sa_50.im	1.2 kB
saut.texture.txt	27 B
saut1.jpg	20.3 kB
saut1.texture.txt	28 B
pomoha.kin	836.7 kB
shkali.texture.txt	29 B
podnog.tga	1.0 MB
pol.tga	1.0 MB
siden.im	2.3 kB
sidenie.texture.txt	30 B
rb.tga	256.0 kB
rama1.tga	1.0 MB
sidenie1.texture.txt	31 B
sign.jpg	31.4 kB
sign.texture.txt	27 B
silovaya.im	480 B
skor.im	7.5 kB
skor.texture.txt	27 B
scr.jpg	352.3 kB
smalltorm.im	12.6 kB
pultsaut.tga	1.0 MB
raciya.tga	1.0 MB
sidenie1.tga	256.0 kB
saut.tga	1.0 MB
shkali.tga	1.0 MB
sidenie.tga	1.0 MB
skor.tga	1.0 MB
sp.texture.txt	25 B
spk.texture.txt	26 B
speedo_needle.im	2.7 kB
steclo-steclo2.texture.txt	48 B
spk1.texture.txt	27 B
strelka.im	2.2 kB
svet.im	1.1 kB
t.im	472 B
t_trubka.texture.txt	31 B
steclo.bmp	65.1 kB
tabl.texture.txt	27 B
tormozpc.im	480 B
steclo2.bmp	65.1 kB
transform.im	480 B
trubi.texture.txt	28 B
sp.tga	256.0 kB
tumbler.im	3.1 kB
tumbler1.im	3.1 kB
tumbler2.im	3.1 kB
traction.im	51.8 kB
tumbler3.im	3.1 kB
v_0.im	712 B
ventelator1.im	484 B
ventelator2.im	484 B
spk1.jpg	392.5 kB
vu_silovaya.im	484 B
vsakoe1.texture.txt	30 B
vu_vspom.im	480 B
win_l.im	26.2 kB
win_r.im	25.3 kB
za1d.texture.txt	27 B
zemla.im	476 B
zemlya.im	480 B
t_trubka.tga	256.0 kB
tabl.bmp	1.0 MB
spk.tga	1.0 MB
za1d.tga	1.0 MB
vsakoe1.tga	1.0 MB
trubi.tga	1.0 MB
pomoha.tga	12.0 MB
Общий объём файлов:	75.8 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:776020:101524>	interior	Кабина ЧС4Т DCC	3.5	30.05.2023 12:58:58	39.3 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:776020:101519>	Dimmon82	traincar	РЖД ЧС4Т-243 DCC	3.7	30.05.2023 13:14:03	11.8 MB
<kuid:776020:101520>	Dimmon82	traincar	РЖД ЧС4Т-285 DCC	3.7	30.05.2023 13:14:03	10.1 MB
<kuid:776020:101521>	Dimmon82	traincar	РЖД ЧС4Т-446 DCC	3.7	30.05.2023 13:14:03	11.7 MB
<kuid:776020:101522>	Dimmon82	traincar	РЖД ЧС4Т-519 DCC	3.7	30.05.2023 13:14:03	13.2 MB
<kuid:776020:101523>	Dimmon82	traincar	РЖД ЧС4Т-550 DCC	3.7	30.05.2023 13:14:03	12.8 MB