<kuid:656225:101523> Amtrak AEM-7 Int

Тип: Кабина
Опубликовано: 20.10.2023 23:42:24
Скачиваний: 42
Размер: 411.4 kB

Скачать

This is a generic Amtrak AEM-7 interior made from My30's BR 143 interior. Thank you My30 for allowing me to release this on the DLS.

config.txt:

username                                "Amtrak AEM-7 Int"
kind                                    "interior"
category-class                          "ZI"
author                                  "TC"
organisation                            "TRS-GermanCollection"
contact-email                           "grc-tc@gmx.net"
contact-website                         "http://mitglied.lycos.de/tomi30"
description                             "This is a generic Amtrak AEM-7 interior made from My30's BR 143 interior.  Thank you My30 for allowing me to release this on the DLS."
license                                 "Freeware.

Darf nur mit meiner Zustimmung auf anderen Internetseiten angeboten oder weiter gegeben werden.

Repaint-Verffentlichung nur nach Absprache mit mir.

Viel Spass
TC"
category-region                         "DE"
category-era                            "2000s"
cameradefault                           0
trainz-build                            3.5
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               240
    height                              180
  }
}
obsolete-table
{
}
mesh-table
{
  default
  {
    mesh                                "br143int.im"
    auto-create                         1
  }
  speedo_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "whitepress_needle.im"
    att                                 "a.speedo"
    limits                              0,43
    att-parent                          "default"
  }
  ampmeter_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "ampmeter_needle.im"
    att                                 "a.ammeter"
    limits                              0,43
    att-parent                          "default"
  }
  horn
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "horn.im"
    att                                 "a.horn"
    limits                              0,1
    angles                              0,-0.6
    notches                             0,1
    notchheight                         3,3
    radius                              0.16
    mousespeed                          -2
    att-parent                          "default"
  }
  light_switch
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.light_switch"
    mesh                                "light_switch.im"
    limits                              0,1
    angles                              0,-0.6
    notches                             0,1
    notchheight                         3,3
    radius                              0.16
    mousespeed                          -2
  }
  independantbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.ind_brake_lever"
    mesh                                "light_switch.im"
    limits                              0,1
    angles                              0,-0.6
    notches                             0,1
    notchheight                         3,3
    radius                              0.16
    mousespeed                          -2
  }
  reverser_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "reverser_lever.im"
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              0.35,-0.55
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  trainbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "train_brake_lever.im"
    att                                 "a.train_brake_lever"
    limits                              0,4
    angles                              0.4,-0.4
    notches                             0,0.25,0.5,0.75,1
    notchheight                         1,2,2,2,1
    radius                              0.1
    att-parent                          "default"
  }
  throttle_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "throttle_lever.im"
    att                                 "a.throttle_lever"
    limits                              0,26
    angles                              1.5,0
    notches                             0,0.05,0.1,0.15,0.2,0.25,0.3,0.35,0.4,0.45,0.5,0.55,0.6,0.65,0.7,0.72,0.75,0.78,0.8,0.83,0.85,0.88,0.9,0.93,0.95,0.97,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1
    radius                              0.2
    att-parent                          "default"
  }
  dynamicbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "dynamic_lever.im"
    att                                 "a.dynamic_brake"
    limits                              0,2
    angles                              -0.55,0.55
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.18
    att-parent                          "default"
  }
  pantograph_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "pantograph_lever.im"
    att                                 "a.pantograph_lever"
    limits                              0,1
    angles                              0,-0.6
    notches                             0,1
    notchheight                         3,3
    radius                              0.16
    mousespeed                          -2
    att-parent                          "default"
  }
  beifahrer
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "sitz.im"
    att                                 "a.beifahrer"
    att-parent                          "default"
    limits                              0,1
    angles                              0,1.7
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         0,0,0,0,0,0,0,0,0
    mousespeed                          -1
  }
  blende01
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "blende.im"
    att                                 "a.blende01"
    limits                              0,11
    angles                              0,0.02
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         0,0,0,0,0,0,0,0,0
    radius                              0
    mousespeed                          -1
  }
  blende02
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "blende.im"
    att                                 "a.blende02"
    limits                              0,11
    angles                              0,0.02
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         0,0,0,0,0,0,0,0,0
    radius                              0
    mousespeed                          -1
  }
}
cameralist
{
  camera0                               -0.644,0.588,0.339,0,0
  camera1                               -0.522,1.945,0.458,-6.283,-0.108
  camera2                               -1.564,1.638,0.492,-0.017,-0.067
  camera3                               -1.564,1.638,0.492,-2.923,-0.062
  camera4                               0.863,1.862,0.492,-6.979,-0.171
  camera5                               0.173,2.016,0.492,-0.266,-0.093
}
kuid                                    <kuid:656225:101523>
kuid-table
{
}

Файлы:

anzeige01.texture.txt	32 B
bezug.texture.txt	28 B
black.texture.txt	28 B
br143_texture.texture.txt	36 B
ampmeter_needle.im	804 B
sound
sound / cabin.txt	291 B
sound / reverser.wav	5.0 kB
sound / notch_1.wav	8.6 kB
sound / throttle.wav	4.0 kB
sound / switch_6.wav	11.6 kB
bseit.texture.txt	28 B
black.tga	12.0 kB
env_metal.texture.txt	32 B
dynamic_lever.im	7.3 kB
glas-win2.texture.txt	32 B
glas-win2.tga	12.0 kB
horn.im	1.9 kB
light_switch.im	1.9 kB
nadel.texture.txt	28 B
nadel.tga	12.0 kB
ind_brake_lever.im	7.3 kB
pantograph_lever.im	1.9 kB
reverser_lever.im	1.9 kB
sitz.im	10.7 kB
throttle_lever.im	5.0 kB
whitepress_needle.im	804 B
train_brake_lever.im	7.4 kB
blende.im	1.6 kB
$screenshot$.jpg	21.8 kB
bezug.tga	48.0 kB
bseit.tga	96.0 kB
env_metal.tga	48.0 kB
br143int.im	82.7 kB
anzeige01.tga	768.0 kB
br143_texture.tga	1.5 MB
Общий объём файлов:	2.7 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:656225:101523>	interior	Amtrak AEM-7 Int	3.5	20.10.2023 23:42:24	411.4 kB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет