<kuid2:633834:101010:2> 8 axle FM body

Тип: traincar
Опубликовано: 17.07.2020 9:10:25
Скачиваний: 26
Размер: 179.9 kB

Скачать

Some flatcar loads while relativly small were so heavy they exceded the axle loading limit for a standard (2 bogie) flatcar.
Several Railroads modified flatcars by replacing the normal 2 bogies with two bolsters with bogies at each end which then attached to the underside of the car body in the same manner as the original single bogie. This reduces the axle loading by almost half. This is the body section of an empty car.

Use Consist 'Railcar 8 axle FM KRL 500' <kuid:633834:101012>

or

Assemble this car in Surveyor by placing the body section on the track then select the bolster (kuid2:210518:6501:1) and place them half way between the center
of the body and each end. When properly assembled there will onl;y be 1 red and 1 green arrow and the car will move as a unit.

Model by bendorsey
Repaint by normhart

config.txt:

kuid                                    <kuid2:633834:101010:2>
username                                "8 axle FM body"
kind                                    "traincar"
trainz-build                            3.5
engine                                  0
enginespec                              <kuid:-1:42004201>
extensions
{
  reportingmark-32711                   "KRL"
  carnumber-32711                       "500"
}
mesh-table
{
  default
  {
    mesh                                "Hicapyflat_6_body.im"
    auto-create                         1
  }
  attach_mesh
  {
    mesh                                "attach_mesh.im"
    auto-create                         1
    effects
    {
      2
      {
        kind                            "name"
        fontsize                        0.15
        fontcolor                       175,175,175
        att                             "a.name0"
        name                            "500"
      }
      3
      {
        kind                            "name"
        fontsize                        0.15
        fontcolor                       175,175,175
        att                             "a.name1"
        name                            "500"
      }
      4
      {
        kind                            "name"
        fontsize                        0.15
        fontcolor                       175,175,175
        att                             "a.name2"
        name                            "KRL"
      }
      5
      {
        kind                            "name"
        fontsize                        0.15
        fontcolor                       175,175,175
        att                             "a.name3"
        name                            "KRL"
      }
    }
  }
  shadow
  {
    mesh                                "shadow.im"
    auto-create                         0
  }
}
bogeys
{
  0
  {
    bogey                               <kuid:-10:149>
    reversed                            0
  }
  1
  {
    bogey                               <kuid:-10:149>
    reversed                            0
  }
  2
  {
    bogey                               <kuid2:124017:5007:1>
    reversed                            0
  }
  3
  {
    bogey                               <kuid2:124017:5008:1>
    reversed                            0
  }
  4
  {
    bogey                               <kuid:-10:149>
    reversed                            0
  }
}
mass                                    30000
fonts                                   0
category-class                          "XFH"
category-era                            "1900s;1910s;1920s;1930s;1940s;1950s"
category-region                         "US"
description                             "Some flatcar loads while relativly small were so heavy they exceded the axle loading limit for a standard (2 bogie) flatcar.
Several Railroads modified flatcars by replacing the normal 2 bogies with two bolsters with bogies at each end which then attached to the underside of the car body in the same manner as the original single bogie. This reduces the axle loading by almost half. This is the body section of an empty car. 

Use Consist 'Railcar 8 axle FM KRL 500' <kuid:633834:101012>

or 

Assemble this car in Surveyor by placing the body section on the track then select the bolster (kuid2:210518:6501:1) and place them half way between the center
of the body and each end. When properly assembled there will onl;y be 1 red and 1 green arrow and the car will move as a unit.

Model by bendorsey
Repaint by normhart"
author                                  "Benjamin R. Dorsey"
license                                 "This item is offered free of charge for your enjoyment. It may not be sold or used in any commercial venture. It may be re-skinned for your personal use."
organisation                            "None"
contact-email                           "www.bendorsey@bellsouth.net"
string-table
{
  maxweight                             150000
}
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               240
    height                              180
  }
}
queues
{
  load_center
  {
    size                                1
    initial-count                       0
    attachment-points
    {
      0                                 "a.load0"
    }
    allowed-products
    {
      0                                 <kuid:524343:6285>
    }
    conflicts-with-queues
    {
      0                                 "two_loads"
    }
  }
  two_loads
  {
    size                                2
    initial-count                       0
    attachment-points
    {
      0                                 "a.load1"
      1                                 "a.load2"
    }
    allowed-products
    {
      0                                 <kuid:42796:29001>
    }
    conflicts-with-queues
    {
      0                                 "load_center"
    }
  }
}
kuid-table
{
  clj_coupler_bogie                     <kuid2:124017:5008:1>
  invisible_bogey                       <kuid:-10:149>
  0                                     <kuid:-1:42004201>
  1                                     <kuid2:124017:5007:1>
  2                                     <kuid:524343:6285>
  3                                     <kuid:42796:29001>
}

Файлы:

wood2.texture.txt	28 B
attach_mesh.im	920 B
light grey.texture.txt	33 B
dark grey.tga	1.8 kB
light grey.tga	1.8 kB
black.texture.txt	28 B
$screenshot$.jpg	9.9 kB
black.tga	1.8 kB
wood2.jpg	121.7 kB
dark grey.texture.txt	32 B
shadow.im	73.0 kB
hicapyflat_6_body.im	89.5 kB
Общий объём файлов:	300.5 kB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:633834:101010:2>	traincar	8 axle FM body	3.5	17.07.2020 9:10:25	179.9 kB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-10:149>	#-10	bogey	Тележка_невидимая	0	18.04.2023 0:03:42	1.4 kB
<kuid:-1:42004201>	#-1	engine	Типовой вагон	0	1.03.2023 22:53:14	2.4 kB
<kuid:42796:29001>	#42796	product	Bulldozer	2.2	12.06.2020 19:18:00	1.0 MB
<kuid2:124017:5007:3>	#124017	bogey	Automatic coupler w/brake hose, front (dark)	3.7	23.08.2023 13:27:04	20.3 kB
<kuid2:124017:5008:5>	#124017	bogey	Automatic coupler w/brake hose, back (dark)	4.3	20.06.2020 23:06:54	21.9 kB
<kuid:524343:6285>	#524343	product	Buldozer iv	3.1	27.07.2015 20:00:53	1.4 MB
Всего связей: 6, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет