<kuid:628458:100764> Interior for GP38-2 Amtrak Phase V

Тип: Кабина
Опубликовано: 2.08.2020 9:44:29
Скачиваний: 66
Размер: 37.2 MB

Скачать

Interior for EMD GP38-2.

config.txt:

username                                "Interior for GP38-2 Amtrak Phase V"
kind                                    "interior"
cameradefault                           0
description                             "Interior for EMD GP38-2."
trainz-build                            2.9
author                                  "davesnow"
organisation                            "-"
contact-email                           "-"
contact-website                         "-"
category-region                         "AT"
category-era                            "1950s"
category-class                          "ZX"
license                                 "This item is supplied free of charge for personal use by registered users of Trainz. It or its contents must not be modified, offered for sale or supplied as any part of a Payware package or provided for downloading on any site other than Auran unless this is expressly permitted in writing by the author davesnow / David E. Snow.


DISCLAIMER: It must be noted that this asset MAY or MAY NOT be prototypical. The author may have taken liberties in its creation such as re-coloring, moving, lengthening, shortening, re-designing, resizing, adding or deleting certain parts of the object, adding non-prototypical logos, etc, therefore there is no guarantee that the asset represents any known item."
cameralist
{
  camera0                               -1.189,-4.211,3.75,-0,-0
  camera1                               -1.189,-4.211,3.75,-0.93,-0.151
  camera2                               -1.189,-4.211,3.75,-2.843,-0
  camera3                               1.252,-4.169,3.75,-3.122,-0
  camera4                               1.065,-4.173,3.75,-5.242,-0.17
  camera5                               1.179,-4.152,3.699,-6.105,-0
  camera6                               0.464,-5.147,3.699,-6.141,-0
  camera7                               0.203,-3.689,3.791,-6.281,-0
}
obsolete-table
{
}
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               240
    height                              180
  }
}
mesh-table
{
  default
  {
    mesh                                "Interior_dial_needles.im"
    auto-create                         1
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "throttle_lever.im"
    att                                 "a.throttle_lever"
    limits                              0,8
    angles                              -0.61,0.69
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.35
    mousespeed                          -1
    auto-create                         1
  }
  trainbrakelap_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "trainbrake_handle.im"
    att                                 "a.trainbrake_handle"
    limits                              0,4
    angles                              1.04,-0.69
    notches                             0,0.25,0.5,0.75,1
    notchheight                         2,2,2,2,2
    mousespeed                          -1
  }
  dynamicbrake_lever
  {
    kind                                "lever"
    mesh                                "dynamic_handle.im"
    att                                 "a.dynamic"
    limits                              0,2
    angles                              0.73,-0.78
    notches                             0,0.5,1
    notchheight                         0.1,1
    mousespeed                          -1
    radius                              0.35
    auto-create                         1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reverser_handle.im"
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              0.69,-0.69
    notches                             0,0.5,1
    notchheight                         1,1,1
    auto-create                         1
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "speedometer_needle.im"
    att                                 "a.speedo_needle"
    limits                              0,40
    auto-create                         1
  }
  independantbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "ind_brake_lever.im"
    att                                 "a.ind_brake_lever"
    limits                              0,32
    angles                              0.69,-0.87
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.15
    mousespeed                          -1
    att-parent                          "default"
  }
  horn
  {
    kind                                "pulllever"
    mesh                                "horn.im"
    att                                 "a.horn"
    auto-create                         1
    angles                              -0,0.55
    limits                              0,1
    mousespeed                          -1
    radius                              -0.02
    notches                             0,1
    notchheight                         0,0
  }
  light_switch
  {
    kind                                "lever"
    att                                 "a.switch0"
    mesh                                "switch.im"
    limits                              0,1
    angles                              0,2
    notches                             1,0
    notchheight                         0.1,0.1
    auto-create                         1
  }
  ampmeter_needle
  {
    kind                                "needle"
    mesh                                "Amp_Needle.im"
    att                                 "a.ammeter"
    limits                              0,1500
    angles                              0,1.9
    auto-create                         1
    att-parent                          "default"
  }
  bploco_equaliser
  {
    kind                                "needle"
    mesh                                "white_needle.im"
    att                                 "a.equaliser_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "red_needle.im"
    att                                 "a.main_res_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "red_needle.im"
    att                                 "a.brake_cyl_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "white_needle.im"
    att                                 "a.brake_pipe_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  window_right_front
  {
    kind                                "lever"
    mesh                                "Window_Right_Front.im"
    att                                 "a.windowRtFt0"
    limits                              0,32
    angles                              0.0104,-0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_left_front
  {
    kind                                "lever"
    mesh                                "Window_Left_Front.im"
    att                                 "a.windowLfFt0"
    limits                              0,32
    angles                              -0.0104,0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_right_rear
  {
    kind                                "lever"
    mesh                                "Window_Right_Rear.im"
    att                                 "a.windowRtRr0"
    limits                              0,32
    angles                              0.013,0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_left_rear
  {
    kind                                "lever"
    mesh                                "Window_Left_Rear.im"
    att                                 "a.windowLfRr0"
    limits                              0,32
    angles                              0,0.013
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
}
kuid                                    <kuid:628458:100764>
kuid-table
{
}

Файлы:

accessories art.texture.txt	38 B
brake cylinder textures.texture.txt	46 B
alpha objects-alpha objects.texture.txt	61 B
amp_needle.im	1.3 kB
cow catcher.texture.txt	34 B
coupler new art.texture.txt	38 B
dynamic_handle.im	7.6 kB
$screenshot$.jpg	40.4 kB
ind_brake_lever.im	12.2 kB
horn.im	15.5 kB
indies shell artwork.texture.txt	43 B
interior art 1.texture.txt	37 B
interior art 2.texture.txt	37 B
decals-decals.texture.txt	47 B
interior art 3.texture.txt	37 B
alpha objects.tga	256.0 kB
sound
sound / air_horn_3.wav	177.1 kB
sound / cabin.txt	574 B
sound / lever_2.wav	21.8 kB
sound / lever_4.wav	16.8 kB
sound / lever_5.wav	18.3 kB
sound / notch_1.wav	2.8 kB
sound / reverser.wav	10.4 kB
sound / switch_6.wav	11.6 kB
sound / throttle.wav	4.0 kB
sound / window.wav	74.0 kB
sound / light_switch.wav	30.4 kB
interior art 4.texture.txt	37 B
interior control dials.texture.txt	45 B
decals.tga	1.0 MB
interior control right.texture.txt	45 B
accessories art.tga	3.0 MB
interior control stand.texture.txt	45 B
cow catcher.tga	4.0 MB
interior walls.texture.txt	37 B
brake cylinder textures.tga	4.0 MB
loco art.texture.txt	31 B
coupler new art.tga	3.0 MB
interior_dial_needles.im	857.5 kB
radio & seats art.texture.txt	40 B
red_needle.im	1.3 kB
reflection art.texture.txt	37 B
reverser_handle.im	7.6 kB
reflection art.tga	768.0 kB
speedometer_needle.im	3.4 kB
switch.im	6.4 kB
throttle_lever.im	8.5 kB
trainbrake_handle.im	13.0 kB
white_needle.im	4.6 kB
window_left_front.im	5.1 kB
window_left_rear.im	12.8 kB
window_right_front.im	12.8 kB
window_right_rear.im	5.1 kB
radio & seats art.tga	4.0 MB
indies shell artwork.tga	12.0 MB
interior walls.tga	12.0 MB
loco art.tga	16.0 MB
interior art 2.tga	12.0 MB
interior control dials.tga	16.0 MB
interior art 1.tga	12.0 MB
interior control stand.tga	16.0 MB
interior art 4.tga	16.0 MB
interior control right.tga	12.0 MB
interior art 3.tga	16.0 MB
Общий объём файлов:	161.4 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:628458:100764>	interior	Interior for GP38-2 Amtrak Phase V	2.9	2.08.2020 9:44:29	37.2 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:628458:100763>	#628458	traincar	GP38-2 Amtrak Phase V	3.6	2.08.2020 10:03:54	18.2 MB