<kuid:610762:140121> VTL 71-605 Cabin V2

Тип: Кабина
Опубликовано: 29.04.2023 16:56:11
Скачиваний: 52
Размер: 16.2 MB
Автор: VTL
Скачать

Кабина 71-605 / KTM-5М3
config.txt:
username                                "VTL 71-605 Cabin V2"
kuid                                    <kuid:610762:140121>
kind                                    "interior"
cameradefault                           2
category-class                          "ZI"
category-region                         "RU"
script                                  "71-605_cabin.gs"
class                                   "KTM_5M3"
author                                  "Mixey, ExTra"
description                             "71-605 / KTM-5М3 Cabin"
description-ru                          "Кабина 71-605 / KTM-5М3"
category-era                            "1980s;1990s;2000s;2010s"
trainz-build                            3.7
contact-website                         "http://vtl-trainz.at.ua/ | https://vk.com/vtltrainz"
license                                 "http://vtl-trainz.at.ua/"
enable-shadows-in-cab                   "1"
interior-controls-type                  "full"
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               800
    height                              600
  }
}
cameralist
{
  camera0                               0.195,-6.05,1.396,1.512,0
  camera1                               0.282,-6.522,1.584,1.098,-0.162
  camera2                               0.182,-6.176,2.123,0,-0.246
}
soundscript
{
  sm_up
  {
    repeat-delay                        0,0
    distance                            2,4
    attachment                          "a.zvon"
    trigger                             "sm_up"
    volume                              0.5
    nostartdelay                        1
    priority                            1000
    sound
    {
      0                                 "sound/sm_up.wav"
    }
  }
  sm_down
  {
    repeat-delay                        0,0
    distance                            2,4
    attachment                          "a.zvon"
    trigger                             "sm_down"
    volume                              0.5
    nostartdelay                        1
    priority                            1000
    sound
    {
      0                                 "sound/sm_down.wav"
    }
  }
}
mesh-table
{
  default
  {
    mesh                                "cab.im"
    auto-create                         1
  }
  switchlight0
  {
    kind                                "light"
    mesh                                "lamp_door_otk.im"
    att                                 "a.lamp_dveri"
    auto-create                         0
  }
  switchlight1
  {
    kind                                "light"
    mesh                                "lamp_door_zak.im"
    att                                 "a.lamp_dveri"
    auto-create                         0
  }
  switchlight2
  {
    kind                                "light"
    mesh                                "lamp_ob.im"
    att                                 "a.lamp_dveri"
    auto-create                         0
  }
  switchlight3
  {
    kind                                "light"
    mesh                                "lamp_sol.im"
    att                                 "a.lamp_dveri"
    auto-create                         0
  }
  switchlight4
  {
    kind                                "light"
    mesh                                "lamp_sol.im"
    att                                 "a.podsvet"
    auto-create                         0
  }
  switchlight5
  {
    kind                                "light"
    mesh                                "lamp_sm.im"
    att                                 "a.lamp_dveri"
    auto-create                         0
  }
  switchlight6
  {
    kind                                "light"
    mesh                                "lamp_pov.im"
    att                                 "a.podsvet"
    auto-create                         0
  }
  ampmeter_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "front_slim_needle.im"
    att                                 "a.ampmeter_line0"
    limits                              -500,500
    angles                              0.93,2.24
    att-parent                          "default"
    value                               0.1
  }
  ampmeter2_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "front_slim_needle.im"
    att                                 "a.ampmeter_line1"
    limits                              -500,500
    angles                              0.93,2.24
    att-parent                          "default"
    value                               0.1
  }
  v75_meter
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "front_slim_needle.im"
    att                                 "a.ind_v75"
    limits                              0,80
    angles                              0.89,2.25
    att-parent                          "default"
    value                               0
  }
  a300_meter
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "front_slim_needle.im"
    att                                 "a.ind_a300"
    limits                              -300,300
    angles                              0.89,2.23
    att-parent                          "default"
    value                               0
  }
  manual
  {
    kind                                "animated-lever"
    mesh                                "manual.IM"
    anim                                "manual.kin"
    att                                 "a.manual"
    att-parent                          "default"
    auto-create                         1
    mousespeed                          0.5
    notches                             0,0.182,0.4545,0.7272,1
    notchheight                         1,1,1,1,1
    limits                              0,1
  }
  controller
  {
    mesh                                "kntr.IM"
    kind                                "lever"
    att                                 "a.throtte"
    auto-create                         1
    angles                              1.1,3.15
    limits                              0,10
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         2,2,2,2,2,2,2,2,2,2
    att-parent                          "default"
    radius                              0.01
    mousespeed                          -0.75
  }
  reverser_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "revers.IM"
    att                                 "a.revers"
    limits                              0,2
    angles                              -1.1,-0.6
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  sw
  {
    kind                                "pulllever"
    mesh                                "1.im"
    att                                 "a.bil_coordinate"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0,-0.28
    notches                             0,0.5,1
    notchheight                         0,0,0
  }
  horn
  {
    kind                                "button"
    mesh                                "zv.im"
    att                                 "a.zvonok"
    auto-create                         1
    mousespeed                          50
    radius                              0.1
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
  }
  stopkran
  {
    kind                                "pulllever"
    mesh                                "kn.im"
    att                                 "a.stopkran"
    auto-create                         1
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
    mousespeed                          4
    att-parent                          "default"
  }
  switch17
  {
    kind                                "lever"
    mesh                                "1.im"
    att                                 "a.bil_coordinate"
    auto-create                         1
    mousespeed                          -1
    radius                              0.05
    angles                              0,1.57
    notches                             0,1
    notchheight                         1,1
  }
  l_wiper
  {
    mesh                                "dvor.im"
    auto-create                         1
    att                                 "a.l_wip"
    att-parent                          "default"
    anim                                "anim.kin"
  }
  pitanie
  {
    kind                                "lever"
    mesh                                "1.im"
    att                                 "a.bil_coordinate"
    auto-create                         1
    mousespeed                          1
    radius                              0.05
    limits                              0,1
    angles                              0,1.57
    notches                             0,1
    notchheight                         0,0
  }
  pedal
  {
    kind                                "pullrope"
    mesh                                "1.im"
    att                                 "a.zvon02"
    auto-create                         1
    mousespeed                          50
    radius                              0.1
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
  }
  nw
  {
    kind                                "pullrope"
    mesh                                "1.im"
    att                                 "a.zvon05"
    att-parent                          "default"
    auto-create                         1
    mousespeed                          80
    radius                              0.1
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
  }
  switch20
  {
    kind                                "lever"
    mesh                                "1.im"
    att                                 "a.bil_coordinate"
    att-parent                          "default"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              -0.1,-0.2
    notches                             0,1
    notchheight                         0,0
  }
  inform
  {
    kind                                "pullrope"
    mesh                                "1.im"
    att                                 "a.bil_coordinate"
    att-parent                          "default"
    auto-create                         1
    mousespeed                          70
    radius                              0.1
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
  }
  rb2
  {
    kind                                "pullrope"
    mesh                                "1.im"
    att                                 "a.zvon03"
    limits                              0,1
    auto-create                         1
    mousespeed                          50
    angles                              0,-0.004
    notches                             0,1
    notchheight                         0,0
  }
  tiffon
  {
    kind                                "pullrope"
    mesh                                "1.im"
    att                                 "a.zvon01"
    auto-create                         1
    mousespeed                          70
    radius                              0.1
    limits                              0,1
    angles                              0,-0.002
    notches                             0,1
    notchheight                         0,0
  }
  zvonok
  {
    kind                                "pullrope"
    mesh                                "1.im"
    att                                 "a.zvon"
    auto-create                         1
    mousespeed                          50
    radius                              0.1
    limits                              0,1
    angles                              0,-0.0015
    notches                             0,1
    notchheight                         0,0
  }
  dz
  {
    kind                                "lever"
    mesh                                "1.im"
    att                                 "a.zvon03"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              0,-0.7
    notches                             0,1
    notchheight                         0,0
  }
  osv_cab_low
  {
    kind                                "lever"
    mesh                                "1.im"
    att                                 "a.bil_coordinate"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    limits                              0,1
    angles                              -0.1,-0.2
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  vz
  {
    kind                                "pulllever"
    mesh                                "1.im"
    att                                 "a.zvon03"
    auto-create                         1
    mousespeed                          50
    radius                              0.05
    angles                              0,-0.7
    notches                             0,1
    notchheight                         1,1
  }
  t_1
  {
    kind                                "lever"
    mesh                                "tumb_3.im"
    att                                 "a.t1"
    auto-create                         0
    mousespeed                          10
    radius                              0.2
    limits                              0,1
    angles                              1,-0.2
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  t_2
  {
    kind                                "lever"
    mesh                                "tumb_3.im"
    att                                 "a.t2"
    auto-create                         1
    mousespeed                          10
    radius                              0.2
    limits                              0,1
    angles                              0.3,-0.3
    notches                             0,1
    notchheight                         1,1
    att-parent                          "default"
  }
  t_3
  {
    kind                                "lever"
    mesh                                "tumb_3.im"
    att                                 "a.t3"
    auto-create                         1
    mousespeed                          10
    radius                              0.2
    limits                              0,1
    angles                              0.3,-0.3
    notches                             0,1
    notchheight                         1,1
    att-parent                          "default"
  }
  t_4
  {
    kind                                "lever"
    mesh                                "tumb_3.im"
    att                                 "a.t4"
    auto-create                         1
    mousespeed                          10
    radius                              0.2
    limits                              0,1
    angles                              0.3,-0.3
    notches                             0,1
    notchheight                         1,1
    att-parent                          "default"
  }
  t_5
  {
    kind                                "lever"
    mesh                                "tumb_3.im"
    att                                 "a.t5"
    auto-create                         1
    mousespeed                          10
    radius                              0.2
    limits                              0,1
    angles                              0.3,-0.3
    notches                             0,1
    notchheight                         1,1
    att-parent                          "default"
  }
  t_6
  {
    kind                                "lever"
    mesh                                "tumb_3.im"
    att                                 "a.t6"
    auto-create                         1
    mousespeed                          10
    radius                              0.2
    limits                              0,1
    angles                              0.3,-0.3
    notches                             0,1
    notchheight                         1,1
    att-parent                          "default"
  }
  t_7
  {
    kind                                "lever"
    mesh                                "tumb_3.im"
    att                                 "a.t7"
    auto-create                         1
    mousespeed                          10
    radius                              0.2
    limits                              0,1
    angles                              0.3,-0.3
    notches                             0,1
    notchheight                         1,1
    att-parent                          "default"
  }
  t_8
  {
    kind                                "lever"
    mesh                                "tumb_3.im"
    att                                 "a.t8"
    auto-create                         1
    mousespeed                          10
    radius                              0.2
    limits                              0,1
    angles                              0.3,-0.3
    notches                             0,1
    notchheight                         1,1
    att-parent                          "default"
  }
  t_9
  {
    kind                                "lever"
    mesh                                "tumb_3.im"
    att                                 "a.t9"
    auto-create                         1
    mousespeed                          10
    radius                              0.2
    limits                              0,1
    angles                              0.3,-0.3
    notches                             0,1
    notchheight                         1,1
    att-parent                          "default"
  }
  t_10
  {
    kind                                "lever"
    mesh                                "tumb_3.im"
    att                                 "a.t10"
    auto-create                         1
    mousespeed                          10
    radius                              0.2
    limits                              0,1
    angles                              0.3,-0.3
    notches                             0,1
    notchheight                         1,1
    att-parent                          "default"
  }
  t_11
  {
    kind                                "lever"
    mesh                                "tumb_3.im"
    att                                 "a.t11"
    auto-create                         1
    mousespeed                          10
    radius                              0.2
    limits                              0,1
    angles                              0.3,-0.3
    notches                             0,1
    notchheight                         1,1
    att-parent                          "default"
  }
  osvpult_low
  {
    kind                                "lever"
    mesh                                "1.im"
    att                                 "a.zvon03"
    auto-create                         1
    mousespeed                          25
    radius                              5
    limits                              0,1
    angles                              0.4,-0.4
    notches                             0,1
    notchheight                         0,0
  }
  osvpult
  {
    kind                                "lever"
    mesh                                "1.im"
    att                                 "a.bil_coordinate"
    auto-create                         1
    angles                              -0.4,0.4
    att-parent                          "default"
    limits                              0,2
    notches                             0,0.5,1
    notchheight                         0,0,0
  }
  av1
  {
    kind                                "lever"
    mesh                                "vu.im"
    att                                 "a.bkr_u"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0.65,-0.65
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  vu1
  {
    kind                                "lever"
    mesh                                "vu.im"
    att                                 "a.vu1"
    auto-create                         1
    mousespeed                          15
    radius                              0.05
    limits                              0,1
    angles                              -0.45,0.45
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  vu2
  {
    kind                                "lever"
    mesh                                "vu.im"
    att                                 "a.vu2"
    auto-create                         1
    mousespeed                          15
    radius                              0.05
    limits                              0,1
    angles                              -0.45,0.45
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  vu3
  {
    kind                                "lever"
    mesh                                "vu.im"
    att                                 "a.vu3"
    auto-create                         1
    mousespeed                          15
    radius                              0.05
    limits                              0,1
    angles                              -0.45,0.45
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  vu4
  {
    kind                                "lever"
    mesh                                "vu.im"
    att                                 "a.vu4"
    auto-create                         1
    mousespeed                          15
    radius                              0.05
    limits                              0,1
    angles                              -0.45,0.45
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  vu5
  {
    kind                                "lever"
    mesh                                "vu.im"
    att                                 "a.vu5"
    auto-create                         1
    mousespeed                          15
    radius                              0.05
    limits                              0,1
    angles                              -0.45,0.45
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  osv_cabin
  {
    kind                                "lever"
    mesh                                "tumb_3.im"
    att                                 "a.osv_cab_norm"
    auto-create                         1
    mousespeed                          10
    radius                              0.05
    limits                              0,1
    angles                              0.5,-0.5
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  pvr
  {
    kind                                "lever"
    mesh                                "tumb_1.im"
    att                                 "a.pvr_tumb"
    auto-create                         1
    angles                              0.5,-0.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    mousespeed                          10
    att-parent                          "default"
  }
  perekl_proj
  {
    kind                                "lever"
    mesh                                "tumb_2.im"
    att                                 "a.perekl_proj"
    auto-create                         1
    angles                              0.5,-0.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    mousespeed                          10
    att-parent                          "default"
  }
  dvornik
  {
    kind                                "lever"
    mesh                                "tumb_3.im"
    att                                 "a.tumb_dvornik"
    auto-create                         1
    angles                              0.5,-0.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    mousespeed                          10
    att-parent                          "default"
  }
  door1_lever
  {
    kind                                "lever"
    mesh                                "tumb_1.im"
    att                                 "a.door1"
    auto-create                         1
    angles                              0.5,-0.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    mousespeed                          10
    att-parent                          "default"
  }
  door2_lever
  {
    kind                                "lever"
    mesh                                "tumb_1.im"
    att                                 "a.door2"
    auto-create                         1
    angles                              0.5,-0.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    mousespeed                          10
    att-parent                          "default"
  }
  door3_lever
  {
    kind                                "lever"
    mesh                                "tumb_3.im"
    att                                 "a.door3"
    auto-create                         1
    angles                              0.5,-0.5
    notches                             0,0.5,1
    notchheight                         1,1,1
    mousespeed                          10
    att-parent                          "default"
  }
  pantograph_lever
  {
    kind                                "lever"
    mesh                                "ver_pant.im"
    att                                 "a.pantograph_lever"
    auto-create                         1
    mousespeed                          50
    radius                              0.1
    limits                              0,1
    angles                              0.05,-0.05
    notches                             0,1
    notchheight                         0,0
  }
  speed_km_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "black_needle.IM"
    att                                 "a.speedo_needle"
    limits                              0,120
    angles                              -0.45,4.39
    att-parent                          "default"
    value                               0.1
  }
  lamp_cab_norm
  {
    mesh                                "lampa.im"
    auto-create                         0
    att                                 "a.lamp_night"
    att-parent                          "default"
  }
  lamp_cab_low
  {
    mesh                                "1.im"
    auto-create                         0
    att                                 "a.lamp_night"
    att-parent                          "default"
  }
  cab_voltmeter
  {
    mesh                                "front_slim_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.kw"
    limits                              -400,400
    angles                              0.89,2.22
    att-parent                          "default"
  }
  steklo_first_rain_l
  {
    mesh                                "stekla_lob.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_first_rain_r
  {
    mesh                                "1.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_first_rain_ochn_l
  {
    mesh                                "stekla_lob_dv.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_first_rain_ochn_r
  {
    mesh                                "1.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_first_frost
  {
    mesh                                "1.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_first_frost_otogrev
  {
    mesh                                "1.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_bok_rain
  {
    mesh                                "stekla_bok.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_bok_frost
  {
    mesh                                "1.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
  steklo_bok_frost_otogrev
  {
    mesh                                "1.im"
    auto-create                         0
    att                                 "a.podsvet"
  }
}
string-table
{
  av1                                   "Автоматический выключитель"
  preobraz                              "ТЗУ"
  osv_salon                             "Освещение салона"
  tsepi_upravl_1                        "Цепи Управления 1"
  tsepi_upravl_2                        "Цепи Управления 2"
  tsepi_upravl_3                        "Цепи Управления 3"
  door1_lever                           "Первая дверь"
  door2_lever                           "Вторая дверь"
  door3_lever                           "Третья дверь"
  dvornik                               "Дворники"
  horn                                  "Звонок"
  osv_cabin                             "Освещение кабины"
  trainbrake_lever                      "Торможение"
  pantograph_lever                      "Пантограф"
  stopkran                              "Затормозка"
  perekl_proj                           "Фары"
  osv_cab_low                           "Аварийное освещение кабины"
  reverser_lever                        "Реверс"
  osvpult_low                           "Тусклое освещение пульта"
  pvr                                   "Поворот"
  radio                                 "Радиофикация"
  torm_signal                           "Сигнал тормоза"
  vent                                  "Вентиляторы салона"
  route                                 "Фонари маршрутные"
  pushki                                "Калорифер"
  speed_km                              "Спидометр"
  door_signal                           "Сигнал дверей"
  gbr                                   "Фонари габаритные"
  speaker                               "Динамик наружный"
  controller                            "Контроллер | 0"
  controller_m                          "Контроллер | М"
  controller_go                         "Контроллер | Х"
  controller_stop                       "Контроллер | Т"
  controller_stop_tr                    "Контроллер | ТР"
}
kuid-table
{
}
Файлы:
black.texture.txt	28 B
cab_ktm8_10.texture.txt	34 B
dvor.im	9.8 kB
black_needle.im	12.8 kB
1.im	592 B
1.kin	5.1 kB
black.jpg	74.2 kB
anim.kin	5.2 kB
cab_ktm8_3.texture.txt	33 B
front_slim_needle.im	514 B
71-605_cabin.gse	5.8 kB
cab_ktm8_10.jpg	84.0 kB
kn.im	2.6 kB
kab_ktm1.texture.txt	31 B
sound
sound / controller.wav	20.8 kB
sound / beep.wav	174.8 kB
sound / reverser.wav	22.7 kB
sound / rele.wav	47.5 kB
sound / engine_stop.wav	174.8 kB
sound / sm_down.wav	41.5 kB
sound / sm_up.wav	47.5 kB
sound / tumbler1.wav	30.5 kB
sound / tumbler2.wav	21.7 kB
sound / vu_on.wav	46.9 kB
sound / vu_off.wav	46.9 kB
sound / cabin.txt	1.0 kB
sound / engine_start.wav	44.9 kB
lamp_ob.im	5.6 kB
lamp_pov.im	16.8 kB
lamp_door_otk.im	36.2 kB
lamp_sol.im	33.3 kB
man_1.texture.txt	28 B
man_2.texture.txt	28 B
man_1.jpg	603.7 kB
manual.im	14.2 kB
kab_ktm2.jpg	1.1 MB
pom_pan.jpg	547.2 kB
kab_ktm2.texture.txt	31 B
pom_pan.texture.txt	30 B
revers.im	18.0 kB
kab_ktm3.texture.txt	31 B
kab_ktm5.texture.txt	31 B
kab_ktm6.texture.txt	31 B
kab_ktm4.texture.txt	31 B
kab_ktm4.jpg	838.9 kB
kab_ktm7.texture.txt	31 B
cab_ktm8_3.jpg	450.4 kB
kab_ktm8.texture.txt	31 B
kab_ktm9.texture.txt	31 B
kab_ktm7.jpg	1.2 MB
kab_ktm9.jpg	1.2 MB
kab_ktm5.jpg	1.3 MB
ktm11_kontrtga.jpg	377.2 kB
stekla_bok.im	1.2 kB
lamp_sm.im	16.8 kB
lampa.im	1.3 kB
kab_ktm10.texture.txt	32 B
stekla_lob.im	624 B
stekla_lob_dv.im	620 B
t_dvor.im	18.4 kB
kab_st.jpg	66.5 kB
kab_ktm3.jpg	1.1 MB
tex7_ochn_rain_dvor-tex7_rain.texture.txt	63 B
tex7_rain-tex7_rain.texture.txt	53 B
tex7_ochn_rain_dvor.jpg	234.2 kB
kab_st-kab_st.texture.txt	47 B
ktm11_kontrtga.texture.txt	37 B
kab_ktm8.jpg	1.5 MB
tex7_rain.jpg	179.5 kB
lamp_door_zak.im	16.8 kB
kntr.im	48.8 kB
ver_pant.im	6.5 kB
vu.im	1.8 kB
tumb_2.im	9.9 kB
tumb_1.im	8.9 kB
window-window.texture.txt	47 B
tumb_3.im	18.4 kB
kab_ktm10.jpg	396.4 kB
thumbnail.jpg	270.5 kB
zv.im	9.1 kB
kab_ktm1.jpg	1.5 MB
manual.kin	28.9 kB
man_2.jpg	578.5 kB
cab.im	1.9 MB
kab_ktm6.jpg	1.4 MB
kab_st.bmp	3.0 MB
tex7_rain.bmp	768.1 kB
window.tga	4.0 MB
Общий объём файлов:	25.5 MB
Версии элемента:
kuid	kind	name	build	date	size
<kuid:610762:140121>	interior	VTL 71-605 Cabin V2	3.7	29.04.2023 16:56:11	16.2 MB
Зависимости:
kuid	author	kind	name	build	date	size
Нет
Зависимые элементы:
kuid	author	kind	name	build	date	size
Нет